summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-01-05 09:13:46 +0100
committerStefan Roese <sr@denx.de>2008-01-05 09:13:46 +0100
commit5ba576c01602fd328800a427964c36a0a05c5dce (patch)
tree20849db0d2cf056f5e644d6ec85430890fb5a594
parent845c6c95dbfe6c915ce68a0a115852fa17932fb4 (diff)
downloadu-boot-imx-5ba576c01602fd328800a427964c36a0a05c5dce.zip
u-boot-imx-5ba576c01602fd328800a427964c36a0a05c5dce.tar.gz
u-boot-imx-5ba576c01602fd328800a427964c36a0a05c5dce.tar.bz2
ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c44
1 files changed, 0 insertions, 44 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 2475ed9..3ac2cdc 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -111,8 +111,6 @@
#define NUMMEMWORDS 8
#define NUMLOOPS 64 /* memory test loops */
-#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
@@ -2268,39 +2266,6 @@ static void program_ecc(unsigned long *dimm_populated,
return;
}
-#ifdef CONFIG_ECC_ERROR_RESET
-/*
- * Check for ECC errors and reset board upon any error here
- *
- * On the Katmai 440SPe eval board, from time to time, the first
- * lword write access after DDR2 initializazion with ECC checking
- * enabled, leads to an ECC error. I couldn't find a configuration
- * without this happening. On my board with the current setup it
- * happens about 1 from 10 times.
- *
- * The ECC modules used for testing are:
- * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's)
- *
- * This has to get fixed for the Katmai and tested for the other
- * board (440SP/440SPe) that will eventually use this code in the
- * future.
- *
- * 2007-03-01, sr
- */
-static void check_ecc(void)
-{
- u32 val;
-
- mfsdram(SDRAM_ECCCR, val);
- if (val != 0) {
- printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n",
- val, mfdcr(0x4c), mfdcr(0x4e));
- printf("ECC error occured, resetting board...\n");
- do_reset(NULL, 0, 0, NULL);
- }
-}
-#endif
-
static void wait_ddr_idle(void)
{
u32 val;
@@ -2375,15 +2340,6 @@ static void program_ecc_addr(unsigned long start_address,
sync();
eieio();
wait_ddr_idle();
-
-#ifdef CONFIG_ECC_ERROR_RESET
- /*
- * One write to 0 is enough to trigger this ECC error
- * (see description above)
- */
- out_be32(0, 0x12345678);
- check_ecc();
-#endif
}
}
#endif