summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-06-08 07:58:41 -0400
committerTom Rini <trini@ti.com>2014-06-08 07:58:41 -0400
commit55e8250bd3cfd996d1caa04f520160a89ec04754 (patch)
tree64060c77eb5467f9a4c5ee421978db49d1a48ad3
parent3e1fa221f94b7ae3389d166882b77f1da5895f22 (diff)
parent5ed28948a3ffe6c735386e59c132989869beaa3e (diff)
downloadu-boot-imx-55e8250bd3cfd996d1caa04f520160a89ec04754.zip
u-boot-imx-55e8250bd3cfd996d1caa04f520160a89ec04754.tar.gz
u-boot-imx-55e8250bd3cfd996d1caa04f520160a89ec04754.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c20
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock.c11
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock_am43xx.c9
-rw-r--r--arch/arm/cpu/armv7/am33xx/emif4.c4
-rw-r--r--arch/arm/cpu/armv7/exynos/clock.c45
-rw-r--r--arch/arm/cpu/armv7/exynos/lowlevel_init.c8
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c35
-rw-r--r--arch/arm/cpu/armv7/exynos/power.c6
-rw-r--r--arch/arm/cpu/armv7/keystone/init.c9
-rw-r--r--arch/arm/cpu/armv7/omap3/mem.c12
-rw-r--r--arch/arm/dts/exynos4.dtsi8
-rw-r--r--arch/arm/dts/exynos4412-trats2.dts12
-rw-r--r--arch/arm/dts/exynos5.dtsi8
-rw-r--r--arch/arm/dts/exynos5250-snow.dts61
-rw-r--r--arch/arm/dts/tegra124-jetson-tk1.dts9
-rw-r--r--arch/arm/dts/tegra124-venice2.dts9
-rw-r--r--arch/arm/dts/tegra30-beaver.dts9
-rw-r--r--arch/arm/include/asm/arch-am33xx/clock.h1
-rw-r--r--arch/arm/include/asm/arch-am33xx/cpu.h35
-rw-r--r--arch/arm/include/asm/arch-exynos/clk.h5
-rw-r--r--arch/arm/include/asm/arch-exynos/power.h1
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware-k2hk.h2
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware.h3
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h8
-rw-r--r--board/BuR/tseries/board.c2
-rw-r--r--board/BuR/tseries/mux.c9
-rw-r--r--board/compulab/cm_t35/cm_t35.c12
-rw-r--r--board/samsung/common/board.c13
-rw-r--r--board/samsung/goni/goni.c8
-rw-r--r--board/samsung/smdk5250/Makefile4
-rw-r--r--board/samsung/smdk5250/exynos5-dt.c238
-rw-r--r--board/samsung/smdk5250/smdk5250.c363
-rw-r--r--board/samsung/smdk5420/smdk5420.c3
-rw-r--r--board/ti/am43xx/Makefile2
-rw-r--r--board/ti/am43xx/board.c55
-rw-r--r--boards.cfg1
-rw-r--r--doc/README.nand60
-rw-r--r--doc/device-tree-bindings/exynos/dwmmc.txt8
-rw-r--r--doc/device-tree-bindings/power/tps65090.txt17
-rw-r--r--doc/device-tree-bindings/regulator/tps65090.txt122
-rw-r--r--drivers/mmc/dw_mmc.c12
-rw-r--r--drivers/mmc/exynos_dw_mmc.c205
-rw-r--r--drivers/mmc/mmc.c16
-rw-r--r--drivers/mmc/s5p_sdhci.c42
-rw-r--r--drivers/mtd/nand/am335x_spl_bch.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/nand_base.c11
-rw-r--r--drivers/mtd/nand/nand_spl_simple.c2
-rw-r--r--drivers/mtd/nand/omap_elm.c28
-rw-r--r--drivers/mtd/nand/omap_gpmc.c193
-rw-r--r--drivers/power/battery/bat_trats.c4
-rw-r--r--drivers/power/battery/bat_trats2.c2
-rw-r--r--drivers/power/mfd/pmic_max77693.c2
-rw-r--r--drivers/power/pmic/Makefile2
-rw-r--r--drivers/power/pmic/pmic_max8997.c2
-rw-r--r--drivers/power/pmic/pmic_tps65090.c310
-rw-r--r--drivers/power/pmic/pmic_tps65218.c97
-rw-r--r--drivers/power/power_fsl.c6
-rw-r--r--drivers/power/power_i2c.c4
-rw-r--r--drivers/spi/ti_qspi.c1
-rw-r--r--include/configs/am3517_crane.h1
-rw-r--r--include/configs/am43xx_evm.h45
-rw-r--r--include/configs/arndale.h4
-rw-r--r--include/configs/beaver.h2
-rw-r--r--include/configs/bur_am335x_common.h4
-rw-r--r--include/configs/cm_t335.h1
-rw-r--r--include/configs/cm_t35.h1
-rw-r--r--include/configs/devkit8000.h1
-rw-r--r--include/configs/dig297.h1
-rw-r--r--include/configs/exynos4-dt.h4
-rw-r--r--include/configs/exynos5-dt.h1
-rw-r--r--include/configs/exynos5250-dt.h2
-rw-r--r--include/configs/jetson-tk1.h2
-rw-r--r--include/configs/k2hk_evm.h4
-rw-r--r--include/configs/mx25pdk.h2
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/omap3_beagle.h1
-rw-r--r--include/configs/omap3_evm_common.h2
-rw-r--r--include/configs/omap3_igep00x0.h1
-rw-r--r--include/configs/omap3_logic.h1
-rw-r--r--include/configs/omap3_overo.h1
-rw-r--r--include/configs/omap3_zoom1.h1
-rw-r--r--include/configs/pengwyn.h1
-rw-r--r--include/configs/s5p_goni.h113
-rw-r--r--include/configs/tam3517-common.h2
-rw-r--r--include/configs/tao3530.h2
-rw-r--r--include/configs/tegra-common-ums.h26
-rw-r--r--include/configs/ti_am335x_common.h9
-rw-r--r--include/configs/ti_armv7_common.h3
-rw-r--r--include/configs/tseries.h1
-rw-r--r--include/configs/venice2.h2
-rw-r--r--include/configs/woodburn_common.h2
-rw-r--r--include/dwmmc.h5
-rw-r--r--include/fdtdec.h4
-rw-r--r--include/initcall.h2
-rw-r--r--include/linux/mtd/nand.h19
-rw-r--r--include/linux/mtd/omap_elm.h11
-rw-r--r--include/linux/mtd/omap_gpmc.h11
-rw-r--r--include/mmc.h25
-rw-r--r--include/power/max77693_pmic.h2
-rw-r--r--include/power/max8997_pmic.h1
-rw-r--r--include/power/pmic.h5
-rw-r--r--include/power/tps65090_pmic.h73
-rw-r--r--include/power/tps65218.h63
-rw-r--r--lib/fdtdec.c4
-rw-r--r--lib/initcall.c17
108 files changed, 1918 insertions, 763 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 28c16f8..7fe049e 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -144,6 +144,19 @@ int arch_misc_init(void)
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
+{
+ prcm_init();
+ set_mux_conf_regs();
+
+ return 0;
+}
+
+/*
* This function is the place to do per-board things such as ramp up the
* MPU clock frequency.
*/
@@ -224,7 +237,7 @@ void s_init(void)
set_uart_mux_conf();
setup_clocks_for_console();
uart_soft_reset();
-#ifdef CONFIG_NOR_BOOT
+#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT)
gd->baudrate = CONFIG_BAUDRATE;
serial_init();
gd->have_console = 1;
@@ -232,13 +245,14 @@ void s_init(void)
gd = &gdata;
preloader_console_init();
#endif
- prcm_init();
- set_mux_conf_regs();
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
rtc32k_enable();
#endif
+#ifdef CONFIG_SPL_BUILD
+ board_early_init_f();
sdram_init();
+#endif
}
#endif
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 0672798..ec7d468 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -170,8 +170,19 @@ void do_enable_clocks(u32 *const *clk_domains,
};
}
+/*
+ * Before scaling up the clocks we need to have the PMIC scale up the
+ * voltages first. This will be dependent on which PMIC is in use
+ * and in some cases we may not be scaling things up at all and thus not
+ * need to do anything here.
+ */
+__weak void scale_vcores(void)
+{
+}
+
void prcm_init()
{
enable_basic_clocks();
+ scale_vcores();
setup_dplls();
}
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index d0bc234..31188c8 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -53,6 +53,8 @@ const struct dpll_regs dpll_ddr_regs = {
void setup_clocks_for_console(void)
{
+ u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+
/* Do not add any spl_debug prints in this function */
clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
@@ -63,6 +65,13 @@ void setup_clocks_for_console(void)
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+ (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+ clkctrl = readl(&cmwkup->wkup_uart0ctrl);
+ idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+ MODULE_CLKCTRL_IDLEST_SHIFT;
+ }
}
void enable_basic_clocks(void)
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 2c67c32..a7a3e88 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -21,6 +21,10 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ sdram_init();
+#endif
+
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size(
(void *)CONFIG_SYS_SDRAM_BASE,
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 1fea4d6..400d134 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -869,7 +869,7 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
- unsigned int addr;
+ unsigned int addr, clear_bit, set_bit;
/*
* CLK_DIV_FSYS1
@@ -877,44 +877,26 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
* CLK_DIV_FSYS2
* MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
* CLK_DIV_FSYS3
- * MMC4_PRE_RATIO [15:8]
+ * MMC4_RATIO [3:0]
*/
if (dev_index < 2) {
addr = (unsigned int)&clk->div_fsys1;
- } else if (dev_index == 4) {
+ clear_bit = MASK_PRE_RATIO(dev_index);
+ set_bit = SET_PRE_RATIO(dev_index, div);
+ } else if (dev_index == 4) {
addr = (unsigned int)&clk->div_fsys3;
dev_index -= 4;
+ /* MMC4 is controlled with the MMC4_RATIO value */
+ clear_bit = MASK_RATIO(dev_index);
+ set_bit = SET_RATIO(dev_index, div);
} else {
addr = (unsigned int)&clk->div_fsys2;
dev_index -= 2;
+ clear_bit = MASK_PRE_RATIO(dev_index);
+ set_bit = SET_PRE_RATIO(dev_index, div);
}
- clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
- (div & 0xff) << ((dev_index << 4) + 8));
-}
-
-/* exynos4x12: set the mmc clock */
-static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
-{
- struct exynos4x12_clock *clk =
- (struct exynos4x12_clock *)samsung_get_base_clock();
- unsigned int addr;
-
- /*
- * CLK_DIV_FSYS1
- * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
- * CLK_DIV_FSYS2
- * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
- */
- if (dev_index < 2) {
- addr = (unsigned int)&clk->div_fsys1;
- } else {
- addr = (unsigned int)&clk->div_fsys2;
- dev_index -= 2;
- }
-
- clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
- (div & 0xff) << ((dev_index << 4) + 8));
+ clrsetbits_le32(addr, clear_bit, set_bit);
}
/* exynos5: set the mmc clock */
@@ -1612,10 +1594,7 @@ void set_mmc_clk(int dev_index, unsigned int div)
else
exynos5_set_mmc_clk(dev_index, div);
} else {
- if (proid_is_exynos4412())
- exynos4x12_set_mmc_clk(dev_index, div);
- else
- exynos4_set_mmc_clk(dev_index, div);
+ exynos4_set_mmc_clk(dev_index, div);
}
}
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 11fe5b8..dcc270f 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -39,6 +39,7 @@ enum {
DO_CLOCKS = 1 << 1,
DO_MEM_RESET = 1 << 2,
DO_UART = 1 << 3,
+ DO_POWER = 1 << 4,
};
int do_lowlevel_init(void)
@@ -48,6 +49,8 @@ int do_lowlevel_init(void)
arch_cpu_init();
+ set_ps_hold_ctrl();
+
reset_status = get_reset_status();
switch (reset_status) {
@@ -60,9 +63,12 @@ int do_lowlevel_init(void)
break;
default:
/* This is a normal boot (not a wake from sleep) */
- actions = DO_CLOCKS | DO_MEM_RESET;
+ actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
}
+ if (actions & DO_POWER)
+ set_ps_hold_ctrl();
+
if (actions & DO_CLOCKS) {
system_clock_init();
mem_ctrl_init(actions & DO_MEM_RESET);
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index ee7c2e5..86a0c75 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -573,15 +573,26 @@ static void exynos4_i2c_config(int peripheral, int flags)
static int exynos4_mmc_config(int peripheral, int flags)
{
int i, start = 0, start_ext = 0;
+ unsigned int func, ext_func;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
start = EXYNOS4_GPIO_K00;
start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
break;
case PERIPH_ID_SDMMC2:
start = EXYNOS4_GPIO_K20;
start_ext = EXYNOS4_GPIO_K33;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
+ break;
+ case PERIPH_ID_SDMMC4:
+ start = EXYNOS4_GPIO_K00;
+ start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x3);
+ ext_func = S5P_GPIO_FUNC(0x4);
break;
default:
return -1;
@@ -589,13 +600,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
for (i = start; i < (start + 7); i++) {
if (i == (start + 2))
continue;
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
+ /* SDMMC2 do not use 8bit mode at exynos4 */
if (flags & PINMUX_FLAG_8BIT_MODE) {
for (i = start_ext; i < (start_ext + 4); i++) {
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(i, ext_func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
@@ -676,15 +688,26 @@ static void exynos4x12_i2c_config(int peripheral, int flags)
static int exynos4x12_mmc_config(int peripheral, int flags)
{
int i, start = 0, start_ext = 0;
+ unsigned int func, ext_func;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
start = EXYNOS4X12_GPIO_K00;
start_ext = EXYNOS4X12_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
break;
case PERIPH_ID_SDMMC2:
start = EXYNOS4X12_GPIO_K20;
start_ext = EXYNOS4X12_GPIO_K33;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
+ break;
+ case PERIPH_ID_SDMMC4:
+ start = EXYNOS4_GPIO_K00;
+ start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x3);
+ ext_func = S5P_GPIO_FUNC(0x4);
break;
default:
return -1;
@@ -692,13 +715,13 @@ static int exynos4x12_mmc_config(int peripheral, int flags)
for (i = start; i < (start + 7); i++) {
if (i == (start + 2))
continue;
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
if (flags & PINMUX_FLAG_8BIT_MODE) {
for (i = start_ext; i < (start_ext + 4); i++) {
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(i, ext_func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
@@ -759,10 +782,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC4:
return exynos4_mmc_config(peripheral, flags);
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC3:
- case PERIPH_ID_SDMMC4:
debug("SDMMC device %d not implemented\n", peripheral);
return -1;
default:
@@ -794,10 +817,10 @@ static int exynos4x12_pinmux_config(int peripheral, int flags)
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC4:
return exynos4x12_mmc_config(peripheral, flags);
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC3:
- case PERIPH_ID_SDMMC4:
debug("SDMMC device %d not implemented\n", peripheral);
return -1;
default:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 563abd7..638ee0b 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void)
EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
}
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
void set_ps_hold_ctrl(void)
{
if (cpu_is_exynos5())
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015a..4df5ae1 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@ int arch_cpu_init(void)
share_all_segments(11); /* PCIE */
#endif
+ /*
+ * just initialise the COM2 port so that TI specific
+ * UART register PWREMU_MGMT is initialized. Linux UART
+ * driver doesn't handle this.
+ */
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
return 0;
}
diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
index e649409..1832aff 100644
--- a/arch/arm/cpu/armv7/omap3/mem.c
+++ b/arch/arm/cpu/armv7/omap3/mem.c
@@ -21,17 +21,6 @@
struct gpmc *gpmc_cfg;
#if defined(CONFIG_CMD_NAND)
-#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
- SMNAND_GPMC_CONFIG1,
- SMNAND_GPMC_CONFIG2,
- SMNAND_GPMC_CONFIG3,
- SMNAND_GPMC_CONFIG4,
- SMNAND_GPMC_CONFIG5,
- SMNAND_GPMC_CONFIG6,
- 0,
-};
-#else
static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
M_NAND_GPMC_CONFIG1,
M_NAND_GPMC_CONFIG2,
@@ -40,7 +29,6 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
M_NAND_GPMC_CONFIG5,
M_NAND_GPMC_CONFIG6, 0
};
-#endif
#endif /* CONFIG_CMD_NAND */
#if defined(CONFIG_CMD_ONENAND)
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 71dc7eb..110eb43 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -128,6 +128,14 @@
interrupts = <0 78 0>;
};
+ dwmmc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-dwmmc";
+ reg = <0x12550000 0x1000>;
+ interrupts = <0 131 0>;
+ };
+
gpio: gpio {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 1596f83..cc58c87 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -31,6 +31,7 @@
console = "/serial@13820000";
mmc0 = "sdhci@12510000";
mmc2 = "sdhci@12530000";
+ mmc4 = "dwmmc@12550000";
};
i2c@138d0000 {
@@ -416,6 +417,7 @@
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
pwr-gpios = <&gpio 0xB2 0>;
+ status = "disabled";
};
sdhci@12520000 {
@@ -431,4 +433,14 @@
sdhci@12540000 {
status = "disabled";
};
+
+ dwmmc@12550000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <2 1 0>;
+ pwr-gpios = <&gpio 0xB2 0>;
+ fifoth_val = <0x203f0040>;
+ bus_hz = <400000000>;
+ div = <0x3>;
+ index = <4>;
+ };
};
diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
index f8c8741..a2b533a 100644
--- a/arch/arm/dts/exynos5.dtsi
+++ b/arch/arm/dts/exynos5.dtsi
@@ -136,7 +136,7 @@
mmc@12200000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12200000 0x1000>;
interrupts = <0 75 0>;
};
@@ -144,7 +144,7 @@
mmc@12210000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12210000 0x1000>;
interrupts = <0 76 0>;
};
@@ -152,7 +152,7 @@
mmc@12220000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12220000 0x1000>;
interrupts = <0 77 0>;
};
@@ -160,7 +160,7 @@
mmc@12230000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12230000 0x1000>;
interrupts = <0 78 0>;
};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 9b48a0c..ab4f2f8 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -44,7 +44,7 @@
reg = <0x1e>;
compatible = "google,cros-ec";
i2c-max-frequency = <100000>;
- ec-interrupt = <&gpio 782 1>;
+ ec-interrupt = <&gpio 182 1>;
};
power-regulator@48 {
@@ -60,7 +60,7 @@
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
- ec-interrupt = <&gpio 782 1>;
+ ec-interrupt = <&gpio 182 1>;
optimise-flash-write;
status = "disabled";
};
@@ -80,6 +80,19 @@
reg = <0x22>;
compatible = "maxim,max98095-codec";
};
+
+ ptn3460-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ /*
+ * TODO(sjg@chromium.org): Use GPIOs here
+ * powerdown-gpio = <&gpy2 5 0>;
+ * reset-gpio = <&gpx1 5 0>;
+ * edid-emulation = <5>;
+ * pinctrl-names = "default";
+ * pinctrl-0 = <&ptn3460_gpios>;
+ */
+ };
};
i2c@12c60000 {
@@ -184,4 +197,48 @@
/* UP LEFT */
0x070b0067 0x070c0069>;
};
+
+ fimd@14400000 {
+ samsung,vl-freq = <60>;
+ samsung,vl-col = <1366>;
+ samsung,vl-row = <768>;
+ samsung,vl-width = <1366>;
+ samsung,vl-height = <768>;
+
+ samsung,vl-clkp;
+ samsung,vl-dp;
+ samsung,vl-hsp;
+ samsung,vl-vsp;
+
+ samsung,vl-bpix = <4>;
+
+ samsung,vl-hspw = <32>;
+ samsung,vl-hbpd = <80>;
+ samsung,vl-hfpd = <48>;
+ samsung,vl-vspw = <5>;
+ samsung,vl-vbpd = <14>;
+ samsung,vl-vfpd = <3>;
+ samsung,vl-cmd-allow-len = <0xf>;
+
+ samsung,winid = <0>;
+ samsung,interface-mode = <1>;
+ samsung,dp-enabled = <1>;
+ samsung,dual-lcd-enabled = <0>;
+ };
+
+ dp@145b0000 {
+ samsung,lt-status = <0>;
+
+ samsung,master-mode = <0>;
+ samsung,bist-mode = <0>;
+ samsung,bist-pattern = <0>;
+ samsung,h-sync-polarity = <0>;
+ samsung,v-sync-polarity = <0>;
+ samsung,interlaced = <0>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ };
+
};
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index 52e8c0e..464287e 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -17,7 +17,8 @@
sdhci1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
spi1 = "/spi@7000da00";
- usb0 = "/usb@7d008000";
+ usb0 = "/usb@7d000000";
+ usb1 = "/usb@7d008000";
};
memory {
@@ -77,6 +78,12 @@
bus-width = <8>;
};
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+ };
+
usb@7d008000 {
status = "okay";
nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts
index 2f8d1dc..f003413 100644
--- a/arch/arm/dts/tegra124-venice2.dts
+++ b/arch/arm/dts/tegra124-venice2.dts
@@ -17,7 +17,8 @@
sdhci1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
spi1 = "/spi@7000da00";
- usb0 = "/usb@7d008000";
+ usb0 = "/usb@7d000000";
+ usb1 = "/usb@7d008000";
};
memory {
@@ -77,6 +78,12 @@
bus-width = <8>;
};
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+ };
+
usb@7d008000 {
status = "okay";
nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
index a7cc93e..85e62e9 100644
--- a/arch/arm/dts/tegra30-beaver.dts
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -14,7 +14,8 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000000";
- usb0 = "/usb@7d008000";
+ usb0 = "/usb@7d000000";
+ usb1 = "/usb@7d008000";
};
memory {
@@ -70,6 +71,12 @@
bus-width = <8>;
};
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ nvidia,vbus-gpio = <&gpio 238 0>; /* gpio DD6, PEX_L1_CLKREQ */
+ };
+
usb@7d008000 {
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index f00fad3..4af6b57 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -107,6 +107,7 @@ const struct dpll_params *get_dpll_mpu_params(void);
const struct dpll_params *get_dpll_core_params(void);
const struct dpll_params *get_dpll_per_params(void);
const struct dpll_params *get_dpll_ddr_params(void);
+void scale_vcores(void);
void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
void prcm_init(void);
void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index d9f0306..aa10fab 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -26,7 +26,17 @@
#define TCLR_PRE BIT(5) /* Pre-scaler enable */
#define TCLR_PTV_SHIFT (2) /* Pre-scaler shift value */
#define TCLR_PRE_DISABLE CL_BIT(5) /* Pre-scalar disable */
-
+#define TCLR_CE BIT(6) /* compare mode enable */
+#define TCLR_SCPWM BIT(7) /* pwm outpin behaviour */
+#define TCLR_TCM BIT(8) /* edge detection of input pin*/
+#define TCLR_TRG_SHIFT (10) /* trigmode on pwm outpin */
+#define TCLR_PT BIT(12) /* pulse/toggle mode of outpin*/
+#define TCLR_CAPTMODE BIT(13) /* capture mode */
+#define TCLR_GPOCFG BIT(14) /* 0=output,1=input */
+
+#define TCFG_RESET BIT(0) /* software reset */
+#define TCFG_EMUFREE BIT(1) /* behaviour of tmr on debug */
+#define TCFG_IDLEMOD_SHIFT (2) /* power management */
/* device type */
#define DEVICE_MASK (BIT(8) | BIT(9) | BIT(10))
#define TST_DEVICE 0x0
@@ -87,7 +97,8 @@ struct cm_wkuppll {
unsigned int wkctrlclkctrl; /* offset 0x04 */
unsigned int wkgpio0clkctrl; /* offset 0x08 */
unsigned int wkl4wkclkctrl; /* offset 0x0c */
- unsigned int resv2[4];
+ unsigned int timer0clkctrl; /* offset 0x10 */
+ unsigned int resv2[3];
unsigned int idlestdpllmpu; /* offset 0x20 */
unsigned int resv3[2];
unsigned int clkseldpllmpu; /* offset 0x2c */
@@ -121,7 +132,9 @@ struct cm_wkuppll {
unsigned int wkup_uart0ctrl; /* offset 0xB4 */
unsigned int wkup_i2c0ctrl; /* offset 0xB8 */
unsigned int wkup_adctscctrl; /* offset 0xBC */
- unsigned int resv12[6];
+ unsigned int resv12;
+ unsigned int timer1clkctrl; /* offset 0xC4 */
+ unsigned int resv13[4];
unsigned int divm6dpllcore; /* offset 0xD8 */
};
@@ -178,7 +191,9 @@ struct cm_perpll {
unsigned int epwmss2clkctrl; /* offset 0xD8 */
unsigned int l3instrclkctrl; /* offset 0xDC */
unsigned int l3clkctrl; /* Offset 0xE0 */
- unsigned int resv8[4];
+ unsigned int resv8[2];
+ unsigned int timer5clkctrl; /* offset 0xEC */
+ unsigned int timer6clkctrl; /* offset 0xF0 */
unsigned int mmc1clkctrl; /* offset 0xF4 */
unsigned int mmc2clkctrl; /* offset 0xF8 */
unsigned int resv9[8];
@@ -191,9 +206,17 @@ struct cm_perpll {
/* Encapsulating Display pll registers */
struct cm_dpll {
- unsigned int resv1[2];
+ unsigned int resv1;
+ unsigned int clktimer7clk; /* offset 0x04 */
unsigned int clktimer2clk; /* offset 0x08 */
- unsigned int resv2[10];
+ unsigned int clktimer3clk; /* offset 0x0C */
+ unsigned int clktimer4clk; /* offset 0x10 */
+ unsigned int resv2;
+ unsigned int clktimer5clk; /* offset 0x18 */
+ unsigned int clktimer6clk; /* offset 0x1C */
+ unsigned int resv3[2];
+ unsigned int clktimer1clk; /* offset 0x28 */
+ unsigned int resv4[2];
unsigned int clklcdcpixelclk; /* offset 0x34 */
};
#else
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index cdeef32..ffbc07e 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -16,6 +16,11 @@
#define BPLL 5
#define RPLL 6
+#define MASK_PRE_RATIO(x) (0xff << ((x << 4) + 8))
+#define MASK_RATIO(x) (0xf << (x << 4))
+#define SET_PRE_RATIO(x, y) ((y & 0xff) << ((x << 4) + 8))
+#define SET_RATIO(x, y) ((y & 0xf) << (x << 4))
+
enum pll_src_bit {
EXYNOS_SRC_MPLL = 6,
EXYNOS_SRC_EPLL,
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index c9609a2..a4b41ad 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -1726,4 +1726,5 @@ uint32_t get_reset_status(void);
/* Read the resume function and call it */
void power_exit_wakeup(void);
+
#endif
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 50ff13a..7ac2662 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -115,8 +115,6 @@
#define K2HK_LPSC_ARM_SREFLEX 51
#define K2HK_LPSC_TETRIS 52
-#define K2HK_UART0_BASE 0x02530c00
-
/* DDR3A definitions */
#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index a305a0c..6c532ca 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -142,6 +142,9 @@ struct ddr3_emif_config {
#define KS2_DDR3_PMCTL_OFFSET 0x38
#define KS2_DDR3_ZQCFG_OFFSET 0xC8
+#define KS2_UART0_BASE 0x02530c00
+#define KS2_UART1_BASE 0x02531000
+
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
#endif
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index bdb1435..d2dfb1e 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -354,14 +354,6 @@ enum {
#define GPMC_CS_ENABLE 0x1
-#define SMNAND_GPMC_CONFIG1 0x00000800
-#define SMNAND_GPMC_CONFIG2 0x00141400
-#define SMNAND_GPMC_CONFIG3 0x00141400
-#define SMNAND_GPMC_CONFIG4 0x0F010F01
-#define SMNAND_GPMC_CONFIG5 0x010C1414
-#define SMNAND_GPMC_CONFIG6 0x1F0F0A80
-#define SMNAND_GPMC_CONFIG7 0x00000C44
-
#define M_NAND_GPMC_CONFIG1 0x00001800
#define M_NAND_GPMC_CONFIG2 0x00141400
#define M_NAND_GPMC_CONFIG3 0x00141400
diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c
index f0510e5..c0178e7 100644
--- a/board/BuR/tseries/board.c
+++ b/board/BuR/tseries/board.c
@@ -117,7 +117,9 @@ void sdram_init(void)
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+#ifdef CONFIG_NAND
gpmc_init();
+#endif
return 0;
}
diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index 3c76e96..210ac71 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -27,6 +27,11 @@ static struct module_pin_mux uart0_pin_mux[] = {
};
#ifdef CONFIG_MMC
static struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
+ {OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
+ {OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT5 */
+ {OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT4 */
+
{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */
{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */
{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */
@@ -125,7 +130,7 @@ static struct module_pin_mux gpIOs[] = {
{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
/* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */
{OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)},
- /* GPIO2_28 (MMC0_DAT1) - MII_nNAND */
+ /* GPIO2_27 (MMC0_DAT1) - MII_nNAND */
{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
/* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */
{OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},
@@ -148,7 +153,7 @@ static struct module_pin_mux gpIOs[] = {
* DISPLAY_ONOFF (Backlight Enable at LVDS Versions)
*/
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | RXACTIVE)},
- /* GPIO0_19 (DMA_INTR0) - ISPLAY_MODE (CPLD) */
+ /* GPIO0_19 (DMA_INTR0) - DISPLAY_MODE (CPLD) */
{OFFSET(xdma_event_intr0), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
/* GPIO0_20 (DMA_INTR1) - REP-Switch */
{OFFSET(xdma_event_intr1), (MODE(7) | PULLUP_EN | RXACTIVE)},
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 00bcf41..0944903 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -54,12 +54,12 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
};
static u32 gpmc_nand_config[GPMC_MAX_REG] = {
- SMNAND_GPMC_CONFIG1,
- SMNAND_GPMC_CONFIG2,
- SMNAND_GPMC_CONFIG3,
- SMNAND_GPMC_CONFIG4,
- SMNAND_GPMC_CONFIG5,
- SMNAND_GPMC_CONFIG6,
+ M_NAND_GPMC_CONFIG1,
+ M_NAND_GPMC_CONFIG2,
+ M_NAND_GPMC_CONFIG3,
+ M_NAND_GPMC_CONFIG4,
+ M_NAND_GPMC_CONFIG5,
+ M_NAND_GPMC_CONFIG6,
0,
};
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index de154e0..9dc7c83 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -243,13 +243,6 @@ int board_eth_init(bd_t *bis)
int board_mmc_init(bd_t *bis)
{
int ret;
-
-#ifdef CONFIG_SDHCI
- /* mmc initializattion for available channels */
- ret = exynos_mmc_init(gd->fdt_blob);
- if (ret)
- debug("mmc init failed\n");
-#endif
#ifdef CONFIG_DWMMC
/* dwmmc initializattion for available channels */
ret = exynos_dwmmc_init(gd->fdt_blob);
@@ -257,6 +250,12 @@ int board_mmc_init(bd_t *bis)
debug("dwmmc init failed\n");
#endif
+#ifdef CONFIG_SDHCI
+ /* mmc initializattion for available channels */
+ ret = exynos_mmc_init(gd->fdt_blob);
+ if (ret)
+ debug("mmc init failed\n");
+#endif
return ret;
}
#endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 4cea63b..eb0f9bf 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -14,6 +14,8 @@
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <samsung/misc.h>
+#include <usb.h>
+#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -175,6 +177,12 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
.regs_otg = S5PC110_OTG_BASE,
.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return s3c_udc_probe(&s5pc110_otg_data);
+}
#endif
#ifdef CONFIG_MISC_INIT_R
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 6a58655..3d96b07 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -7,9 +7,5 @@
obj-y += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
-ifdef CONFIG_OF_CONTROL
obj-y += exynos5-dt.o
-else
-obj-y += smdk5250.o
-endif
endif
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 58821c4..d6ce133 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -11,15 +11,16 @@
#include <i2c.h>
#include <netdev.h>
#include <spi.h>
+#include <asm/gpio.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dwmmc.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
+#include <power/tps65090_pmic.h>
#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -41,7 +42,197 @@ int exynos_init(void)
return 0;
}
+#if defined(CONFIG_POWER)
+#ifdef CONFIG_POWER_MAX77686
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = pmic_reg_read(p, reg, &val);
+ if (ret) {
+ debug("%s: PMIC %d register read failed\n", __func__, reg);
+ return -1;
+ }
+ val |= regval;
+ ret = pmic_reg_write(p, reg, val);
+ if (ret) {
+ debug("%s: PMIC %d register write failed\n", __func__, reg);
+ return -1;
+ }
+ return 0;
+}
+
+static int max77686_init(void)
+{
+ struct pmic *p;
+
+ if (pmic_init(I2C_PMIC))
+ return -1;
+
+ p = pmic_get("MAX77686_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+ MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+ return -1;
+
+ /* VDD_MIF */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+ MAX77686_BUCK1OUT_1V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK1OUT);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+ MAX77686_BUCK1CTRL_EN))
+ return -1;
+
+ /* VDD_ARM */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+ MAX77686_BUCK2DVS1_1_3V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK2DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+ MAX77686_BUCK2CTRL_ON))
+ return -1;
+
+ /* VDD_INT */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+ MAX77686_BUCK3DVS1_1_0125V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK3DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_G3D */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+ MAX77686_BUCK4DVS1_1_2V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK4DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_LDO2 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+ MAX77686_LD02CTRL1_1_5V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO3 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+ MAX77686_LD03CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO5 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+ MAX77686_LD05CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO10 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+ MAX77686_LD10CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_POWER_MAX77686 */
+
+int exynos_power_init(void)
+{
+ int ret = 0;
+
+#ifdef CONFIG_POWER_MAX77686
+ ret = max77686_init();
+ if (ret)
+ return ret;
+#endif
+#ifdef CONFIG_POWER_TPS65090
+ /*
+ * The TPS65090 may not be in the device tree. If so, it is not
+ * an error.
+ */
+ ret = tps65090_init();
+ if (ret == 0 || ret == -ENODEV)
+ return 0;
+#endif
+
+ return ret;
+}
+#endif /* CONFIG_POWER */
+
#ifdef CONFIG_LCD
+static int board_dp_bridge_setup(void)
+{
+ const int max_tries = 10;
+ int num_tries, node;
+
+ /*
+ * TODO(sjg): Use device tree for GPIOs when exynos GPIO
+ * numbering patch is in mainline.
+ */
+ debug("%s\n", __func__);
+ node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NXP_PTN3460);
+ if (node < 0) {
+ debug("%s: No node for DP bridge in device tree\n", __func__);
+ return -ENODEV;
+ }
+
+ /* Setup the GPIOs */
+
+ /* PD is ACTIVE_LOW, and initially de-asserted */
+ gpio_set_pull(EXYNOS5_GPIO_Y25, S5P_GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_Y25, 1);
+
+ /* Reset is ACTIVE_LOW */
+ gpio_set_pull(EXYNOS5_GPIO_X15, S5P_GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X15, 0);
+
+ udelay(10);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
+
+ gpio_direction_input(EXYNOS5_GPIO_X07);
+
+ /*
+ * We need to wait for 90ms after bringing up the bridge since there
+ * is a phantom "high" on the HPD chip during its bootup. The phantom
+ * high comes within 7ms of de-asserting PD and persists for at least
+ * 15ms. The real high comes roughly 50ms after PD is de-asserted. The
+ * phantom high makes it hard for us to know when the NXP chip is up.
+ */
+ mdelay(90);
+
+ for (num_tries = 0; num_tries < max_tries; num_tries++) {
+ /* Check HPD. If it's high, we're all good. */
+ if (gpio_get_value(EXYNOS5_GPIO_X07))
+ return 0;
+
+ debug("%s: eDP bridge failed to come up; try %d of %d\n",
+ __func__, num_tries, max_tries);
+ }
+
+ /* Immediately go into bridge reset if the hp line is not high */
+ return -ENODEV;
+}
+
void exynos_cfg_lcd_gpio(void)
{
/* For Backlight */
@@ -60,4 +251,49 @@ void exynos_set_dp_phy(unsigned int onoff)
{
set_dp_phy_ctrl(onoff);
}
+
+void exynos_backlight_on(unsigned int on)
+{
+ debug("%s(%u)\n", __func__, on);
+
+ if (!on)
+ return;
+
+#ifdef CONFIG_POWER_TPS65090
+ int ret;
+
+ ret = tps65090_fet_enable(1); /* Enable FET1, backlight */
+ if (ret)
+ return;
+
+ /* T5 in the LCD timing spec (defined as > 10ms) */
+ mdelay(10);
+
+ /* board_dp_backlight_pwm */
+ gpio_direction_output(EXYNOS5_GPIO_B20, 1);
+
+ /* T6 in the LCD timing spec (defined as > 10ms) */
+ mdelay(10);
+
+ /* board_dp_backlight_en */
+ gpio_direction_output(EXYNOS5_GPIO_X30, 1);
+#endif
+}
+
+void exynos_lcd_power_on(void)
+{
+ int ret;
+
+ debug("%s\n", __func__);
+
+#ifdef CONFIG_POWER_TPS65090
+ /* board_dp_lcd_vdd */
+ tps65090_fet_enable(6); /* Enable FET6, lcd panel */
+#endif
+
+ ret = board_dp_bridge_setup();
+ if (ret && ret != -ENODEV)
+ printf("LCD bridge failed to enable: %d\n", ret);
+}
+
#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
deleted file mode 100644
index 014b7bd..0000000
--- a/board/samsung/smdk5250/smdk5250.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <cros_ec.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <errno.h>
-#include <i2c.h>
-#include <lcd.h>
-#include <netdev.h>
-#include <spi.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/dwmmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/power.h>
-#include <asm/arch/sromc.h>
-#include <asm/arch/dp_info.h>
-#include <power/pmic.h>
-#include <power/max77686_pmic.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SOUND_MAX98095
-static void board_enable_audio_codec(void)
-{
- /* Enable MAX98095 Codec */
- gpio_direction_output(EXYNOS5_GPIO_X17, 1);
- gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
-}
-#endif
-
-int exynos_init(void)
-{
-#ifdef CONFIG_SOUND_MAX98095
- board_enable_audio_codec();
-#endif
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SMC911X
- u32 smc_bw_conf, smc_bc_conf;
- struct fdt_sromc config;
- fdt_addr_t base_addr;
-
- /* Non-FDT configuration - bank number and timing parameters*/
- config.bank = CONFIG_ENV_SROM_BANK;
- config.width = 2;
-
- config.timing[FDT_SROM_TACS] = 0x01;
- config.timing[FDT_SROM_TCOS] = 0x01;
- config.timing[FDT_SROM_TACC] = 0x06;
- config.timing[FDT_SROM_TCOH] = 0x01;
- config.timing[FDT_SROM_TAH] = 0x0C;
- config.timing[FDT_SROM_TACP] = 0x09;
- config.timing[FDT_SROM_PMC] = 0x01;
- base_addr = CONFIG_SMC911X_BASE;
-
- /* Ethernet needs data bus width of 16 bits */
- if (config.width != 2) {
- debug("%s: Unsupported bus width %d\n", __func__,
- config.width);
- return -1;
- }
- smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
- | SROMC_BYTE_ENABLE(config.bank);
-
- smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\
- SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
- SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
- SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
- SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\
- SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
- SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
-
- /* Select and configure the SROMC bank */
- exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
- s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
- return smc911x_initialize(0, base_addr);
-#endif
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
- printf("\nBoard: SMDK5250\n");
- return 0;
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- int err, ret = 0, index, bus_width;
- u32 base;
-
- err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
- if (err)
- debug("SDMMC0 not configured\n");
- ret |= err;
-
- /*EMMC: dwmmc Channel-0 with 8 bit bus width */
- index = 0;
- base = samsung_get_base_mmc() + (0x10000 * index);
- bus_width = 8;
- err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
- if (err)
- debug("dwmmc Channel-0 init failed\n");
- ret |= err;
-
- err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
- if (err)
- debug("SDMMC2 not configured\n");
- ret |= err;
-
- /*SD: dwmmc Channel-2 with 4 bit bus width */
- index = 2;
- base = samsung_get_base_mmc() + (0x10000 * index);
- bus_width = 4;
- err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
- if (err)
- debug("dwmmc Channel-2 init failed\n");
- ret |= err;
-
- return ret;
-}
-#endif
-
-void board_i2c_init(const void *blob)
-{
- int i;
-
- for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
- exynos_pinmux_config((PERIPH_ID_I2C0 + i),
- PINMUX_FLAG_NONE);
- }
-}
-
-#if defined(CONFIG_POWER)
-#ifdef CONFIG_POWER_MAX77686
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
- u32 val;
- int ret = 0;
-
- ret = pmic_reg_read(p, reg, &val);
- if (ret) {
- debug("%s: PMIC %d register read failed\n", __func__, reg);
- return -1;
- }
- val |= regval;
- ret = pmic_reg_write(p, reg, val);
- if (ret) {
- debug("%s: PMIC %d register write failed\n", __func__, reg);
- return -1;
- }
- return 0;
-}
-
-static int max77686_init(void)
-{
- struct pmic *p;
-
- if (pmic_init(I2C_PMIC))
- return -1;
-
- p = pmic_get("MAX77686_PMIC");
- if (!p)
- return -ENODEV;
-
- if (pmic_probe(p))
- return -1;
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
- return -1;
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
- MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
- return -1;
-
- /* VDD_MIF */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
- MAX77686_BUCK1OUT_1V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK1OUT);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
- MAX77686_BUCK1CTRL_EN))
- return -1;
-
- /* VDD_ARM */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
- MAX77686_BUCK2DVS1_1_3V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK2DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
- MAX77686_BUCK2CTRL_ON))
- return -1;
-
- /* VDD_INT */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
- MAX77686_BUCK3DVS1_1_0125V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK3DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
- MAX77686_BUCK3CTRL_ON))
- return -1;
-
- /* VDD_G3D */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
- MAX77686_BUCK4DVS1_1_2V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK4DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
- MAX77686_BUCK3CTRL_ON))
- return -1;
-
- /* VDD_LDO2 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
- MAX77686_LD02CTRL1_1_5V | EN_LDO))
- return -1;
-
- /* VDD_LDO3 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
- MAX77686_LD03CTRL1_1_8V | EN_LDO))
- return -1;
-
- /* VDD_LDO5 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
- MAX77686_LD05CTRL1_1_8V | EN_LDO))
- return -1;
-
- /* VDD_LDO10 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
- MAX77686_LD10CTRL1_1_8V | EN_LDO))
- return -1;
-
- return 0;
-}
-#endif /* CONFIG_POWER_MAX77686 */
-
-int exynos_power_init(void)
-{
- int ret = 0;
-
-#ifdef CONFIG_POWER_MAX77686
- ret = max77686_init();
-#endif
- return ret;
-}
-#endif /* CONFIG_POWER */
-
-#ifdef CONFIG_LCD
-void exynos_cfg_lcd_gpio(void)
-{
-
- /* For Backlight */
- gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
- gpio_set_value(EXYNOS5_GPIO_B20, 1);
-
- /* LCD power on */
- gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
- gpio_set_value(EXYNOS5_GPIO_X15, 1);
-
- /* Set Hotplug detect for DP */
- gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
-}
-
-void exynos_set_dp_phy(unsigned int onoff)
-{
- set_dp_phy_ctrl(onoff);
-}
-
-vidinfo_t panel_info = {
- .vl_freq = 60,
- .vl_col = 2560,
- .vl_row = 1600,
- .vl_width = 2560,
- .vl_height = 1600,
- .vl_clkp = CONFIG_SYS_LOW,
- .vl_hsp = CONFIG_SYS_LOW,
- .vl_vsp = CONFIG_SYS_LOW,
- .vl_dp = CONFIG_SYS_LOW,
- .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
-
- /* wDP panel timing infomation */
- .vl_hspw = 32,
- .vl_hbpd = 80,
- .vl_hfpd = 48,
-
- .vl_vspw = 6,
- .vl_vbpd = 37,
- .vl_vfpd = 3,
- .vl_cmd_allow_len = 0xf,
-
- .win_id = 3,
- .dual_lcd_enabled = 0,
-
- .init_delay = 0,
- .power_on_delay = 0,
- .reset_delay = 0,
- .interface_mode = FIMD_RGB_INTERFACE,
- .dp_enabled = 1,
-};
-
-static struct edp_device_info edp_info = {
- .disp_info = {
- .h_res = 2560,
- .h_sync_width = 32,
- .h_back_porch = 80,
- .h_front_porch = 48,
- .v_res = 1600,
- .v_sync_width = 6,
- .v_back_porch = 37,
- .v_front_porch = 3,
- .v_sync_rate = 60,
- },
- .lt_info = {
- .lt_status = DP_LT_NONE,
- },
- .video_info = {
- .master_mode = 0,
- .bist_mode = DP_DISABLE,
- .bist_pattern = NO_PATTERN,
- .h_sync_polarity = 0,
- .v_sync_polarity = 0,
- .interlaced = 0,
- .color_space = COLOR_RGB,
- .dynamic_range = VESA,
- .ycbcr_coeff = COLOR_YCBCR601,
- .color_depth = COLOR_8,
- },
-};
-
-static struct exynos_dp_platform_data dp_platform_data = {
- .edp_dev_info = &edp_info,
-};
-
-void init_panel_info(vidinfo_t *vid)
-{
- vid->rgb_mode = MODE_RGB_P;
- exynos_set_dp_platform_data(&dp_platform_data);
-}
-#endif
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
index 9207522..183c522 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -42,9 +42,6 @@ int exynos_init(void)
#ifdef CONFIG_LCD
void cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* For Backlight */
gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT);
gpio_set_value(EXYNOS5420_GPIO_B20, 1);
diff --git a/board/ti/am43xx/Makefile b/board/ti/am43xx/Makefile
index cb5fe88..36ecb30 100644
--- a/board/ti/am43xx/Makefile
+++ b/board/ti/am43xx/Makefile
@@ -6,7 +6,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-ifdef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
obj-y := mux.o
endif
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index d744977..71af1ae 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -19,6 +19,7 @@
#include <asm/arch/gpio.h>
#include <asm/emif.h>
#include "board.h"
+#include <power/tps65218.h>
#include <miiphy.h>
#include <cpsw.h>
@@ -70,7 +71,7 @@ static int read_eeprom(struct am43xx_board_id *header)
return 0;
}
-#ifdef CONFIG_SPL_BUILD
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define NUM_OPPS 6
@@ -254,13 +255,6 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
const struct dpll_params *get_dpll_ddr_params(void)
{
- struct am43xx_board_id header;
-
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- if (read_eeprom(&header) < 0)
- puts("Could not get board ID.\n");
-
if (board_is_eposevm())
return &epos_evm_dpll_ddr;
else if (board_is_gpevm())
@@ -302,7 +296,10 @@ static u32 get_sys_clk_index(void)
static int get_opp_offset(int max_off, int min_off)
{
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
- int opp = readl(&ctrl->dev_attr), offset, i;
+ int opp, offset, i;
+
+ /* Bits 0:11 are defined to be the MPU_MAX_FREQ */
+ opp = readl(&ctrl->dev_attr) & ~0xFFFFF000;
for (i = max_off; i >= min_off; i--) {
offset = opp & (1 << i);
@@ -335,6 +332,46 @@ const struct dpll_params *get_dpll_per_params(void)
return &dpll_per[ind];
}
+void scale_vcores(void)
+{
+ const struct dpll_params *mpu_params;
+ int mpu_vdd;
+ struct am43xx_board_id header;
+
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+
+ /* Get the frequency */
+ mpu_params = get_dpll_mpu_params();
+
+ if (i2c_probe(TPS65218_CHIP_PM))
+ return;
+
+ if (mpu_params->m == 1000) {
+ mpu_vdd = TPS65218_DCDC_VOLT_SEL_1330MV;
+ } else if (mpu_params->m == 600) {
+ mpu_vdd = TPS65218_DCDC_VOLT_SEL_1100MV;
+ } else {
+ puts("Unknown MPU clock, not scaling\n");
+ return;
+ }
+
+ /* Set DCDC1 (CORE) voltage to 1.1V */
+ if (tps65218_voltage_update(TPS65218_DCDC1,
+ TPS65218_DCDC_VOLT_SEL_1100MV)) {
+ puts("tps65218_voltage_update failure\n");
+ return;
+ }
+
+ /* Set DCDC2 (MPU) voltage */
+ if (tps65218_voltage_update(TPS65218_DCDC2, mpu_vdd)) {
+ puts("tps65218_voltage_update failure\n");
+ return;
+ }
+}
+
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
diff --git a/boards.cfg b/boards.cfg
index a58efd6..4df5781 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -273,6 +273,7 @@ Active arm armv7 am33xx ti am335x
Active arm armv7 am33xx ti am335x am335x_evm_uart5 am335x_evm:SERIAL6,CONS_INDEX=6,NAND Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am335x am335x_evm_usbspl am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT Tom Rini <trini@ti.com>
Active arm armv7 am33xx ti am43xx am43xx_evm am43xx_evm:SERIAL1,CONS_INDEX=1 Lokesh Vutla <lokeshvutla@ti.com>
+Active arm armv7 am33xx ti am43xx am43xx_evm_qspiboot am43xx_evm:SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT Lokesh Vutla <lokeshvutla@ti.com>
Active arm armv7 am33xx ti ti814x ti814x_evm - Matt Porter <matt.porter@linaro.org>
Active arm armv7 am33xx ti ti816x ti816x_evm - -
Active arm armv7 at91 atmel sama5d3_xplained sama5d3_xplained_mmc sama5d3_xplained:SAMA5D3,SYS_USE_MMC Bo Shen <voice.shen@atmel.com>
diff --git a/doc/README.nand b/doc/README.nand
index b91f198..70cf768 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -190,6 +190,24 @@ Configuration Options:
This is used by SoC platforms which do not have built-in ELM
hardware engine required for BCH ECC correction.
+ CONFIG_SYS_NAND_BUSWIDTH_16BIT
+ Indicates that NAND device has 16-bit wide data-bus. In absence of this
+ config, bus-width of NAND device is assumed to be either 8-bit and later
+ determined by reading ONFI params.
+ Above config is useful when NAND device's bus-width information cannot
+ be determined from on-chip ONFI params, like in following scenarios:
+ - SPL boot does not support reading of ONFI parameters. This is done to
+ keep SPL code foot-print small.
+ - In current U-Boot flow using nand_init(), driver initialization
+ happens in board_nand_init() which is called before any device probe
+ (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are
+ not available while configuring controller. So a static CONFIG_NAND_xx
+ is needed to know the device's bus-width in advance.
+ Some drivers using above config are:
+ drivers/mtd/nand/mxc_nand.c
+ drivers/mtd/nand/ndfc.c
+ drivers/mtd/nand/omap_gpmc.c
+
Platform specific options
=========================
@@ -231,6 +249,48 @@ Platform specific options
8-bit BCH code with
- ecc calculation using GPMC hardware engine,
- error detection using ELM hardware engine.
+ OMAP_ECC_BCH16_CODE_HW
+ 16-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using ELM hardware engine.
+
+ How to select ECC scheme on OMAP and AMxx platforms ?
+ -----------------------------------------------------
+ Though higher ECC schemes have more capability to detect and correct
+ bit-flips, but still selection of ECC scheme is dependent on following
+ - hardware engines present in SoC.
+ Some legacy OMAP SoC do not have ELM h/w engine thus such
+ SoC cannot support BCHx_HW ECC schemes.
+ - size of OOB/Spare region
+ With higher ECC schemes, more OOB/Spare area is required to
+ store ECC. So choice of ECC scheme is limited by NAND oobsize.
+
+ In general following expression can help:
+ NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
+ where
+ NAND_OOBSIZE = number of bytes available in
+ OOB/spare area per NAND page.
+ NAND_PAGESIZE = bytes in main-area of NAND page.
+ ECC_BYTES = number of ECC bytes generated to
+ protect 512 bytes of data, which is:
+ 3 for HAM1_xx ecc schemes
+ 7 for BCH4_xx ecc schemes
+ 14 for BCH8_xx ecc schemes
+ 26 for BCH16_xx ecc schemes
+
+ example to check for BCH16 on 2K page NAND
+ NAND_PAGESIZE = 2048
+ NAND_OOBSIZE = 64
+ 2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
+ Thus BCH16 cannot be supported on 2K page NAND.
+
+ However, for 4K pagesize NAND
+ NAND_PAGESIZE = 4096
+ NAND_OOBSIZE = 64
+ ECC_BYTES = 26
+ 2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
+ Thus BCH16 can be supported on 4K page NAND.
+
NOTE:
=====
diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt
index 566da3b..694d195 100644
--- a/doc/device-tree-bindings/exynos/dwmmc.txt
+++ b/doc/device-tree-bindings/exynos/dwmmc.txt
@@ -1,18 +1,18 @@
-* Exynos 5250 DWC_mobile_storage
+* Exynos DWC_mobile_storage
-The Exynos 5250 provides DWC_mobile_storage interface which supports
+The Exynos provides DWC_mobile_storage interface which supports
. Embedded Multimedia Cards (EMMC-version 4.5)
. Secure Digital memory (SD mem-version 2.0)
. Secure Digital I/O (SDIO-version 3.0)
. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
-The Exynos 5250 DWC_mobile_storage provides four channels.
+The Exynos DWC_mobile_storage provides four channels.
SOC specific and Board specific properties are channel specific.
Required SoC Specific Properties:
- compatible: should be
- - samsung,exynos5250-dwmmc: for exynos5250 platforms
+ - samsung,exynos-dwmmc: for exynos platforms
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/doc/device-tree-bindings/power/tps65090.txt b/doc/device-tree-bindings/power/tps65090.txt
new file mode 100644
index 0000000..8e5e0d3
--- /dev/null
+++ b/doc/device-tree-bindings/power/tps65090.txt
@@ -0,0 +1,17 @@
+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+ tps65090-charger {
+ compatible = "ti,tps65090-charger";
+ ti,enable-low-current-chrg;
+ };
diff --git a/doc/device-tree-bindings/regulator/tps65090.txt b/doc/device-tree-bindings/regulator/tps65090.txt
new file mode 100644
index 0000000..313a60b
--- /dev/null
+++ b/doc/device-tree-bindings/regulator/tps65090.txt
@@ -0,0 +1,122 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled and if it is from GPIO then GPIO
+ number should be provided. If it is externally controlled and no GPIO
+ entry then driver will just configure this rails as external control
+ and will not provide any enable/disable APIs.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps65090@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+ interrupts = <0 88 0x4>;
+
+ vsys1-supply = <&some_reg>;
+ vsys2-supply = <&some_reg>;
+ vsys3-supply = <&some_reg>;
+ infet1-supply = <&some_reg>;
+ infet2-supply = <&some_reg>;
+ infet3-supply = <&some_reg>;
+ infet4-supply = <&some_reg>;
+ infet5-supply = <&some_reg>;
+ infet6-supply = <&some_reg>;
+ infet7-supply = <&some_reg>;
+ vsys_l1-supply = <&some_reg>;
+ vsys_l2-supply = <&some_reg>;
+
+ regulators {
+ dcdc1 {
+ regulator-name = "dcdc1";
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-ext-control;
+ dcdc-ext-control-gpios = <&gpio 10 0>;
+ };
+
+ dcdc2 {
+ regulator-name = "dcdc2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3 {
+ regulator-name = "dcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet1 {
+ regulator-name = "fet1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet2 {
+ regulator-name = "fet2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet3 {
+ regulator-name = "fet3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet4 {
+ regulator-name = "fet4";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet5 {
+ regulator-name = "fet5";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet6 {
+ regulator-name = "fet6";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet7 {
+ regulator-name = "fet7";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index eb4e2be..5bf36a0 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -284,8 +284,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
static void dwmci_set_ios(struct mmc *mmc)
{
- struct dwmci_host *host = mmc->priv;
- u32 ctype;
+ struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ u32 ctype, regs;
debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock);
@@ -304,6 +304,14 @@ static void dwmci_set_ios(struct mmc *mmc)
dwmci_writel(host, DWMCI_CTYPE, ctype);
+ regs = dwmci_readl(host, DWMCI_UHS_REG);
+ if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ regs |= DWMCI_DDR_MODE;
+ else
+ regs &= DWMCI_DDR_MODE;
+
+ dwmci_writel(host, DWMCI_UHS_REG, regs);
+
if (host->clksel)
host->clksel(host);
}
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index de8cdcc..d96dfe1 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -13,6 +13,8 @@
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
+#include <asm/gpio.h>
+#include <asm-generic/errno.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
@@ -44,7 +46,11 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
& DWMCI_DIVRATIO_MASK) + 1;
sclk = get_mmc_clk(host->dev_index);
- return sclk / clk_div;
+ /*
+ * Assume to know divider value.
+ * When clock unit is broken, need to set "host->div"
+ */
+ return sclk / clk_div / (host->div + 1);
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
@@ -60,48 +66,36 @@ static void exynos_dwmci_board_init(struct dwmci_host *host)
}
}
-/*
- * This function adds the mmc channel to be registered with mmc core.
- * index - mmc channel number.
- * regbase - register base address of mmc channel specified in 'index'.
- * bus_width - operating bus width of mmc channel specified in 'index'.
- * clksel - value to be written into CLKSEL register in case of FDT.
- * NULL in case od non-FDT.
- */
-int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
+static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
{
- struct dwmci_host *host = NULL;
unsigned int div;
unsigned long freq, sclk;
- host = malloc(sizeof(struct dwmci_host));
- if (!host) {
- printf("dwmci_host malloc fail!\n");
- return 1;
- }
+
+ if (host->bus_hz)
+ freq = host->bus_hz;
+ else
+ freq = DWMMC_MAX_FREQ;
+
/* request mmc clock vlaue of 52MHz. */
- freq = 52000000;
sclk = get_mmc_clk(index);
div = DIV_ROUND_UP(sclk, freq);
/* set the clock divisor for mmc */
set_mmc_clk(index, div);
host->name = "EXYNOS DWMMC";
- host->ioaddr = (void *)regbase;
- host->buswidth = bus_width;
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
host->board_init = exynos_dwmci_board_init;
- if (clksel) {
- host->clksel_val = clksel;
- } else {
- if (0 == index)
+ if (!host->clksel_val) {
+ if (index == 0)
host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
- if (2 == index)
+ else if (index == 2)
host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
}
+ host->caps = MMC_MODE_DDR_52MHz;
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
host->get_mmc_clk = exynos_dwmci_get_clk;
@@ -113,69 +107,134 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
return 0;
}
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index - mmc channel number.
+ * regbase - register base address of mmc channel specified in 'index'.
+ * bus_width - operating bus width of mmc channel specified in 'index'.
+ * clksel - value to be written into CLKSEL register in case of FDT.
+ * NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
+{
+ struct dwmci_host *host = NULL;
+
+ host = malloc(sizeof(struct dwmci_host));
+ if (!host) {
+ error("dwmci_host malloc fail!\n");
+ return -ENOMEM;
+ }
+
+ host->ioaddr = (void *)regbase;
+ host->buswidth = bus_width;
+
+ if (clksel)
+ host->clksel_val = clksel;
+
+ return exynos_dwmci_core_init(host, index);
+}
+
#ifdef CONFIG_OF_CONTROL
-int exynos_dwmmc_init(const void *blob)
+static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
+
+static int do_dwmci_init(struct dwmci_host *host)
{
- int index, bus_width;
- int node_list[DWMMC_MAX_CH_NUM];
- int err = 0, dev_id, flag, count, i;
- u32 clksel_val, base, timing[3];
+ int index, flag, err;
- count = fdtdec_find_aliases_for_id(blob, "mmc",
- COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
- DWMMC_MAX_CH_NUM);
+ index = host->dev_index;
- for (i = 0; i < count; i++) {
- int node = node_list[i];
+ flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
+ err = exynos_pinmux_config(host->dev_id, flag);
+ if (err) {
+ debug("DWMMC not configure\n");
+ return err;
+ }
- if (node <= 0)
- continue;
+ return exynos_dwmci_core_init(host, index);
+}
- /* Extract device id for each mmc channel */
- dev_id = pinmux_decode_periph_id(blob, node);
+static int exynos_dwmci_get_config(const void *blob, int node,
+ struct dwmci_host *host)
+{
+ int err = 0;
+ u32 base, clksel_val, timing[3];
- /* Get the bus width from the device node */
- bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
- if (bus_width <= 0) {
- debug("DWMMC: Can't get bus-width\n");
- return -1;
- }
- if (8 == bus_width)
- flag = PINMUX_FLAG_8BIT_MODE;
- else
- flag = PINMUX_FLAG_NONE;
+ /* Extract device id for each mmc channel */
+ host->dev_id = pinmux_decode_periph_id(blob, node);
- /* config pinmux for each mmc channel */
- err = exynos_pinmux_config(dev_id, flag);
- if (err) {
- debug("DWMMC not configured\n");
- return err;
- }
+ /* Get the bus width from the device node */
+ host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (host->buswidth <= 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -EINVAL;
+ }
- index = dev_id - PERIPH_ID_SDMMC0;
+ host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
+ if (host->dev_index == host->dev_id)
+ host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
- /* Get the base address from the device node */
- base = fdtdec_get_addr(blob, node, "reg");
- if (!base) {
- debug("DWMMC: Can't get base address\n");
- return -1;
- }
- /* Extract the timing info from the node */
- err = fdtdec_get_int_array(blob, node, "samsung,timing",
- timing, 3);
+ /* Set the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -EINVAL;
+ }
+ host->ioaddr = (void *)base;
+
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for devider\n");
+ return -EINVAL;
+ }
+
+ clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+ if (clksel_val)
+ host->clksel_val = clksel_val;
+
+ host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
+ host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
+ host->div = fdtdec_get_int(blob, node, "div", 0);
+
+ return 0;
+}
+
+static int exynos_dwmci_process_node(const void *blob,
+ int node_list[], int count)
+{
+ struct dwmci_host *host;
+ int i, node, err;
+
+ for (i = 0; i < count; i++) {
+ node = node_list[i];
+ if (node <= 0)
+ continue;
+ host = &dwmci_host[i];
+ err = exynos_dwmci_get_config(blob, node, host);
if (err) {
- debug("Can't get sdr-timings for divider\n");
- return -1;
+ debug("%s: failed to decode dev %d\n", __func__, i);
+ return err;
}
- clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
- DWMCI_SET_DRV_CLK(timing[1]) |
- DWMCI_SET_DIV_RATIO(timing[2]));
- /* Initialise each mmc channel */
- err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
- if (err)
- debug("dwmmc Channel-%d init failed\n", index);
+ do_dwmci_init(host);
}
return 0;
}
+
+int exynos_dwmmc_init(const void *blob)
+{
+ int compat_id;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0, count;
+
+ compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ compat_id, node_list, DWMMC_MAX_CH_NUM);
+ err = exynos_dwmci_process_node(blob, node_list, count);
+
+ return err;
+}
#endif
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 8b53ead..55c2c68 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -160,6 +160,9 @@ int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
+ if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ return 0;
+
cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = len;
@@ -516,10 +519,13 @@ static int mmc_change_freq(struct mmc *mmc)
return 0;
/* High Speed is set, there are two types: 52MHz and 26MHz */
- if (cardtype & MMC_HS_52MHZ)
+ if (cardtype & EXT_CSD_CARD_TYPE_52) {
+ if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
+ mmc->card_caps |= MMC_MODE_DDR_52MHz;
mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
- else
+ } else {
mmc->card_caps |= MMC_MODE_HS;
+ }
return 0;
}
@@ -1082,6 +1088,8 @@ static int mmc_startup(struct mmc *mmc)
/* An array of possible bus widths in order of preference */
static unsigned ext_csd_bits[] = {
+ EXT_CSD_DDR_BUS_WIDTH_8,
+ EXT_CSD_DDR_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_8,
EXT_CSD_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_1,
@@ -1089,13 +1097,15 @@ static int mmc_startup(struct mmc *mmc)
/* An array to map CSD bus widths to host cap bits */
static unsigned ext_to_hostcaps[] = {
+ [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
+ [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
};
/* An array to map chosen bus width to an integer */
static unsigned widths[] = {
- 8, 4, 1,
+ 8, 4, 8, 4, 1,
};
for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index ccae4cc..2ff0ec2 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -65,17 +65,9 @@ static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
sdhci_writel(host, ctrl, SDHCI_CONTROL2);
}
-int s5p_sdhci_init(u32 regbase, int index, int bus_width)
+static int s5p_sdhci_core_init(struct sdhci_host *host)
{
- struct sdhci_host *host = NULL;
- host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
- if (!host) {
- printf("sdhci__host malloc fail!\n");
- return 1;
- }
-
host->name = S5P_NAME;
- host->ioaddr = (void *)regbase;
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
@@ -85,15 +77,28 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
host->set_control_reg = &s5p_sdhci_set_control_reg;
host->set_clock = set_mmc_clk;
- host->index = index;
host->host_caps = MMC_MODE_HC;
- if (bus_width == 8)
+ if (host->bus_width == 8)
host->host_caps |= MMC_MODE_8BIT;
return add_sdhci(host, 52000000, 400000);
}
+int s5p_sdhci_init(u32 regbase, int index, int bus_width)
+{
+ struct sdhci_host *host = malloc(sizeof(struct sdhci_host));
+ if (!host) {
+ printf("sdhci__host malloc fail!\n");
+ return 1;
+ }
+ host->ioaddr = (void *)regbase;
+ host->index = index;
+ host->bus_width = bus_width;
+
+ return s5p_sdhci_core_init(host);
+}
+
#ifdef CONFIG_OF_CONTROL
struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
@@ -126,20 +131,7 @@ static int do_sdhci_init(struct sdhci_host *host)
}
}
- host->name = S5P_NAME;
-
- host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
- SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
- SDHCI_QUIRK_WAIT_SEND_CMD;
- host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
-
- host->set_control_reg = &s5p_sdhci_set_control_reg;
- host->set_clock = set_mmc_clk;
-
- host->host_caps = MMC_MODE_HC;
-
- return add_sdhci(host, 52000000, 400000);
+ return s5p_sdhci_core_init(host);
}
static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index bd89b06..ce65d8e 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -55,7 +55,7 @@ static int nand_command(int block, int page, uint32_t offs,
}
/* Shift the offset from byte addressing to word addressing. */
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
/* Set ALE and clear CLE to start address cycle */
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index e1fc48f..e73834d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1195,7 +1195,7 @@ static int nand_command(int block, int page, uint32_t offs, u8 cmd)
hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
hwctrl(&mtd, offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1ce55fd..376976d 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -575,7 +575,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -668,7 +669,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -2582,7 +2584,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
- int i;
+ int i, j;
int val;
/* Try ONFI for unknown chip or LP */
@@ -2593,7 +2595,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
- chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
pr_info("ONFI param page %d valid\n", i);
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index cead4b5..700ca32 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -78,7 +78,7 @@ static int nand_command(int block, int page, uint32_t offs,
}
/* Shift the offset from byte addressing to word addressing. */
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
/* Begin command latch cycle */
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index 47b1f1b..d963e6c 100644
--- a/drivers/mtd/nand/omap_elm.c
+++ b/drivers/mtd/nand/omap_elm.c
@@ -16,23 +16,21 @@
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
-#include <linux/mtd/omap_gpmc.h>
#include <linux/mtd/omap_elm.h>
#include <asm/arch/hardware.h>
+#define DRIVER_NAME "omap-elm"
#define ELM_DEFAULT_POLY (0)
struct elm *elm_cfg;
/**
- * elm_load_syndromes - Load BCH syndromes based on nibble selection
+ * elm_load_syndromes - Load BCH syndromes based on bch_type selection
* @syndrome: BCH syndrome
- * @nibbles:
+ * @bch_type: BCH4/BCH8/BCH16
* @poly: Syndrome Polynomial set to use
- *
- * Load BCH syndromes based on nibble selection
*/
-static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
+static void elm_load_syndromes(u8 *syndrome, enum bch_level bch_type, u8 poly)
{
u32 *ptr;
u32 val;
@@ -48,8 +46,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
(syndrome[7] << 24);
writel(val, ptr);
- /* BCH 8-bit with 26 nibbles (4*8=32) */
- if (nibbles > 13) {
+ if (bch_type == BCH_8_BIT || bch_type == BCH_16_BIT) {
/* reg 2 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
@@ -62,8 +59,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
writel(val, ptr);
}
- /* BCH 16-bit with 52 nibbles (7*8=56) */
- if (nibbles > 26) {
+ if (bch_type == BCH_16_BIT) {
/* reg 4 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
val = syndrome[16] | (syndrome[17] << 8) |
@@ -87,7 +83,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
/**
* elm_check_errors - Check for BCH errors and return error locations
* @syndrome: BCH syndrome
- * @nibbles:
+ * @bch_type: BCH4/BCH8/BCH16
* @error_count: Returns number of errrors in the syndrome
* @error_locations: Returns error locations (in decimal) in this array
*
@@ -95,14 +91,14 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
* and locations in the array passed. Returns -1 if error is not correctable,
* else returns 0
*/
-int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
u32 *error_locations)
{
u8 poly = ELM_DEFAULT_POLY;
s8 i;
u32 location_status;
- elm_load_syndromes(syndrome, nibbles, poly);
+ elm_load_syndromes(syndrome, bch_type, poly);
/* start processing */
writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
@@ -118,8 +114,10 @@ int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
/* check if correctable */
location_status = readl(&elm_cfg->error_location[poly].location_status);
- if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
- return -1;
+ if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) {
+ printf("%s: uncorrectable ECC errors\n", DRIVER_NAME);
+ return -EBADMSG;
+ }
/* get error count */
*error_count = readl(&elm_cfg->error_location[poly].location_status) &
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index bf99b8e..1acf06b 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -148,35 +148,20 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
}
/*
- * Generic BCH interface
+ * Driver configurations
*/
-struct nand_bch_priv {
- uint8_t mode;
- uint8_t type;
- uint8_t nibbles;
+struct omap_nand_info {
struct bch_control *control;
enum omap_ecc ecc_scheme;
};
-/* bch types */
-#define ECC_BCH4 0
-#define ECC_BCH8 1
-#define ECC_BCH16 2
-
-/* BCH nibbles for diff bch levels */
-#define ECC_BCH4_NIBBLES 13
-#define ECC_BCH8_NIBBLES 26
-#define ECC_BCH16_NIBBLES 52
-
/*
* This can be a single instance cause all current users have only one NAND
* with nearly the same setup (BCH8, some with ELM and others with sw BCH
* library).
* When some users with other BCH strength will exists this have to change!
*/
-static __maybe_unused struct nand_bch_priv bch_priv = {
- .type = ECC_BCH8,
- .nibbles = ECC_BCH8_NIBBLES,
+static __maybe_unused struct omap_nand_info omap_nand_info = {
.control = NULL
};
@@ -206,7 +191,7 @@ __maybe_unused
static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
{
struct nand_chip *nand = mtd->priv;
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0;
unsigned int ecc_algo = 0;
unsigned int bch_type = 0;
@@ -215,7 +200,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
u32 ecc_config_val = 0;
/* configure GPMC for specific ecc-scheme */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_SW:
return;
case OMAP_ECC_HAM1_CODE_HW:
@@ -239,6 +224,19 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
eccsize1 = 2; /* non-ECC bits in nibbles per sector */
}
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ ecc_algo = 0x1;
+ bch_type = 0x2;
+ if (mode == NAND_ECC_WRITE) {
+ bch_wrapmode = 0x01;
+ eccsize0 = 0; /* extra bits in nibbles per sector */
+ eccsize1 = 52; /* OOB bits in nibbles per sector */
+ } else {
+ bch_wrapmode = 0x01;
+ eccsize0 = 52; /* ECC bits in nibbles per sector */
+ eccsize1 = 0; /* non-ECC bits in nibbles per sector */
+ }
+ break;
default:
return;
}
@@ -277,11 +275,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
+ struct omap_nand_info *info = chip->priv;
uint32_t *ptr, val = 0;
int8_t i = 0, j;
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
val = readl(&gpmc_cfg->ecc1_result);
ecc_code[0] = val & 0xFF;
@@ -305,11 +303,34 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
ptr--;
}
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[2]);
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[1]);
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[0]);
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ for (j = 3; j >= 0; j--) {
+ val = readl(&gpmc_cfg->bch_result_0_3[0].bch_result_x[j]
+ );
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ }
+ break;
default:
return -EINVAL;
}
/* ECC scheme specific syndrome customizations */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
break;
#ifdef CONFIG_BCH
@@ -323,6 +344,8 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
case OMAP_ECC_BCH8_CODE_HW:
ecc_code[chip->ecc.bytes - 1] = 0x00;
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ break;
default:
return -EINVAL;
}
@@ -345,16 +368,17 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
- uint32_t eccbytes = chip->ecc.bytes;
+ struct omap_nand_info *info = chip->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
uint32_t error_count = 0, error_max;
- uint32_t error_loc[8];
+ uint32_t error_loc[ELM_MAX_ERROR_COUNT];
+ enum bch_level bch_type;
uint32_t i, ecc_flag = 0;
uint8_t count, err = 0;
uint32_t byte_pos, bit_pos;
/* check calculated ecc */
- for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
+ for (i = 0; i < ecc->bytes && !ecc_flag; i++) {
if (calc_ecc[i] != 0x00)
ecc_flag = 1;
}
@@ -363,7 +387,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
/* check for whether its a erased-page */
ecc_flag = 0;
- for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
+ for (i = 0; i < ecc->bytes && !ecc_flag; i++) {
if (read_ecc[i] != 0xff)
ecc_flag = 1;
}
@@ -374,25 +398,33 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
* while reading ECC result we read it in big endian.
* Hence while loading to ELM we have rotate to get the right endian.
*/
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_BCH8_CODE_HW:
- omap_reverse_list(calc_ecc, eccbytes - 1);
+ bch_type = BCH_8_BIT;
+ omap_reverse_list(calc_ecc, ecc->bytes - 1);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ bch_type = BCH_16_BIT;
+ omap_reverse_list(calc_ecc, ecc->bytes);
break;
default:
return -EINVAL;
}
/* use elm module to check for errors */
- elm_config((enum bch_level)(bch->type));
- if (elm_check_error(calc_ecc, bch->nibbles, &error_count, error_loc)) {
- printf("nand: error: uncorrectable ECC errors\n");
- return -EINVAL;
- }
+ elm_config(bch_type);
+ err = elm_check_error(calc_ecc, bch_type, &error_count, error_loc);
+ if (err)
+ return err;
+
/* correct bch error */
for (count = 0; count < error_count; count++) {
- switch (bch->type) {
- case ECC_BCH8:
+ switch (info->ecc_scheme) {
+ case OMAP_ECC_BCH8_CODE_HW:
/* 14th byte in ECC is reserved to match ROM layout */
- error_max = SECTOR_BYTES + (eccbytes - 1);
+ error_max = SECTOR_BYTES + (ecc->bytes - 1);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ error_max = SECTOR_BYTES + ecc->bytes;
break;
default:
return -EINVAL;
@@ -496,10 +528,10 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
/* cannot correct more than 8 errors */
unsigned int errloc[8];
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = chip_priv->control;
+ struct omap_nand_info *info = chip->priv;
- count = decode_bch(bch, NULL, 512, read_ecc, calc_ecc, NULL, errloc);
+ count = decode_bch(info->control, NULL, 512, read_ecc, calc_ecc,
+ NULL, errloc);
if (count > 0) {
/* correct errors */
for (i = 0; i < count; i++) {
@@ -535,15 +567,11 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = NULL;
-
- if (chip_priv)
- bch = chip_priv->control;
+ struct omap_nand_info *info = chip->priv;
- if (bch) {
- free_bch(bch);
- chip_priv->control = NULL;
+ if (info->control) {
+ free_bch(info->control);
+ info->control = NULL;
}
}
#endif /* CONFIG_BCH */
@@ -557,7 +585,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
*/
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -567,12 +595,10 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
/* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
* initialized in nand_scan_tail(), so just set ecc.mode */
- bch_priv.control = NULL;
- bch_priv.type = 0;
+ info->control = NULL;
nand->ecc.mode = NAND_ECC_SOFT;
nand->ecc.layout = NULL;
nand->ecc.size = 0;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
break;
case OMAP_ECC_HAM1_CODE_HW:
@@ -583,8 +609,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
(3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
return -EINVAL;
}
- bch_priv.control = NULL;
- bch_priv.type = 0;
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -605,7 +630,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW;
break;
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
@@ -618,12 +642,11 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
return -EINVAL;
}
/* check if BCH S/W library can be used for error detection */
- bch_priv.control = init_bch(13, 8, 0x201b);
- if (!bch_priv.control) {
+ info->control = init_bch(13, 8, 0x201b);
+ if (!info->control) {
printf("nand: error: could not init_bch()\n");
return -ENODEV;
}
- bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -647,7 +670,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
break;
#else
printf("nand: error: CONFIG_BCH required for ECC\n");
@@ -665,7 +687,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
}
/* intialize ELM for ECC error detection */
elm_init();
- bch_priv.type = ECC_BCH8;
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -683,13 +705,44 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW;
break;
#else
printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
return -EINVAL;
#endif
+ case OMAP_ECC_BCH16_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+ debug("nand: using OMAP_ECC_BCH16_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((26 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (26 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* intialize ELM for ECC error detection */
+ elm_init();
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 26;
+ nand->ecc.strength = 16;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data_bch;
+ nand->ecc.calculate = omap_calculate_ecc;
+ nand->ecc.read_page = omap_read_page_bch;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - nand->ecc.bytes -
+ BADBLOCK_MARKER_LENGTH;
+ break;
+#else
+ printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+ return -EINVAL;
+#endif
default:
debug("nand: error: ecc scheme not enabled or supported\n");
return -EINVAL;
@@ -699,6 +752,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW)
nand->ecc.layout = ecclayout;
+ info->ecc_scheme = ecc_scheme;
return 0;
}
@@ -802,16 +856,21 @@ int board_nand_init(struct nand_chip *nand)
nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
- nand->priv = &bch_priv;
+ nand->priv = &omap_nand_info;
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
- /* If we are 16 bit dev, our gpmc config tells us that */
- if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
- nand->options |= NAND_BUSWIDTH_16;
-
nand->chip_delay = 100;
nand->ecc.layout = &omap_ecclayout;
+ /* configure driver and controller based on NAND device bus-width */
+ gpmc_config = readl(&gpmc_cfg->cs[cs].config1);
+#if defined(CONFIG_SYS_NAND_BUSWIDTH_16BIT)
+ nand->options |= NAND_BUSWIDTH_16;
+ writel(gpmc_config | (0x1 << 12), &gpmc_cfg->cs[cs].config1);
+#else
+ nand->options &= ~NAND_BUSWIDTH_16;
+ writel(gpmc_config & ~(0x1 << 12), &gpmc_cfg->cs[cs].config1);
+#endif
/* select ECC scheme */
#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
index 41b179f..bfde692 100644
--- a/drivers/power/battery/bat_trats.c
+++ b/drivers/power/battery/bat_trats.c
@@ -19,7 +19,7 @@ static int power_battery_charge(struct pmic *bat)
struct battery *battery = p_bat->bat;
int k;
- if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+ if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
return -1;
for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
@@ -42,7 +42,7 @@ static int power_battery_charge(struct pmic *bat)
}
}
exit:
- bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
+ bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_DISABLE, 0);
return 0;
}
diff --git a/drivers/power/battery/bat_trats2.c b/drivers/power/battery/bat_trats2.c
index 94015aa..57221ad 100644
--- a/drivers/power/battery/bat_trats2.c
+++ b/drivers/power/battery/bat_trats2.c
@@ -17,7 +17,7 @@ static int power_battery_charge(struct pmic *bat)
{
struct power_battery *p_bat = bat->pbat;
- if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+ if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
return -1;
return 0;
diff --git a/drivers/power/mfd/pmic_max77693.c b/drivers/power/mfd/pmic_max77693.c
index 1a4416b..6b28e28 100644
--- a/drivers/power/mfd/pmic_max77693.c
+++ b/drivers/power/mfd/pmic_max77693.c
@@ -22,7 +22,7 @@ static int max77693_charger_state(struct pmic *p, int state, int current)
val = MAX77693_CHG_UNLOCK;
pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
- if (state == CHARGER_DISABLE) {
+ if (state == PMIC_CHARGER_DISABLE) {
puts("Disable the charger.\n");
pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
val &= ~0x01;
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 920bbdc..a472f61 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -11,5 +11,7 @@ obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
obj-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
+obj-$(CONFIG_POWER_TPS65090) += pmic_tps65090.o
obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
+obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/pmic/pmic_max8997.c b/drivers/power/pmic/pmic_max8997.c
index ba01692..a36a9a0 100644
--- a/drivers/power/pmic/pmic_max8997.c
+++ b/drivers/power/pmic/pmic_max8997.c
@@ -35,7 +35,7 @@ static int pmic_charger_state(struct pmic *p, int state, int current)
if (pmic_probe(p))
return -1;
- if (state == CHARGER_DISABLE) {
+ if (state == PMIC_CHARGER_DISABLE) {
puts("Disable the charger.\n");
pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
val &= ~(MBCHOSTEN | VCHGR_FC);
diff --git a/drivers/power/pmic/pmic_tps65090.c b/drivers/power/pmic/pmic_tps65090.c
new file mode 100644
index 0000000..c5b3966
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65090.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/tps65090_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TPS65090_NAME "TPS65090_PMIC"
+
+/* TPS65090 register addresses */
+enum {
+ REG_IRQ1 = 0,
+ REG_CG_CTRL0 = 4,
+ REG_CG_STATUS1 = 0xa,
+ REG_FET1_CTRL = 0x0f,
+ REG_FET2_CTRL,
+ REG_FET3_CTRL,
+ REG_FET4_CTRL,
+ REG_FET5_CTRL,
+ REG_FET6_CTRL,
+ REG_FET7_CTRL,
+ TPS65090_NUM_REGS,
+};
+
+enum {
+ IRQ1_VBATG = 1 << 3,
+ CG_CTRL0_ENC_MASK = 0x01,
+
+ MAX_FET_NUM = 7,
+ MAX_CTRL_READ_TRIES = 5,
+
+ /* TPS65090 FET_CTRL register values */
+ FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
+ FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
+ FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
+ FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
+ FET_CTRL_ENFET = 1 << 0, /* Enable FET */
+};
+
+/**
+ * Checks for a valid FET number
+ *
+ * @param fet_id FET number to check
+ * @return 0 if ok, -EINVAL if FET value is out of range
+ */
+static int tps65090_check_fet(unsigned int fet_id)
+{
+ if (fet_id == 0 || fet_id > MAX_FET_NUM) {
+ debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
+ fet_id, MAX_FET_NUM);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * Set the power state for a FET
+ *
+ * @param pmic pmic structure for the tps65090
+ * @param fet_id Fet number to set (1..MAX_FET_NUM)
+ * @param set 1 to power on FET, 0 to power off
+ * @return -EIO if we got a comms error, -EAGAIN if the FET failed to
+ * change state. If all is ok, returns 0.
+ */
+static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
+{
+ int retry;
+ u32 reg, value;
+
+ value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
+ if (set)
+ value |= FET_CTRL_ENFET;
+
+ if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
+ return -EIO;
+
+ /* Try reading until we get a result */
+ for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
+ if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg))
+ return -EIO;
+
+ /* Check that the fet went into the expected state */
+ if (!!(reg & FET_CTRL_PGFET) == set)
+ return 0;
+
+ /* If we got a timeout, there is no point in waiting longer */
+ if (reg & FET_CTRL_TOFET)
+ break;
+
+ mdelay(1);
+ }
+
+ debug("FET %d: Power good should have set to %d but reg=%#02x\n",
+ fet_id, set, reg);
+ return -EAGAIN;
+}
+
+int tps65090_fet_enable(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ ulong start;
+ int loops;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ start = get_timer(0);
+ for (loops = 0;; loops++) {
+ ret = tps65090_fet_set(pmic, fet_id, true);
+ if (!ret)
+ break;
+
+ if (get_timer(start) > 100)
+ break;
+
+ /* Turn it off and try again until we time out */
+ tps65090_fet_set(pmic, fet_id, false);
+ }
+
+ if (ret)
+ debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+ else if (loops)
+ debug("%s: FET%d powered on after %lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+
+ /*
+ * Unfortunately, there are some conditions where the power
+ * good bit will be 0, but the fet still comes up. One such
+ * case occurs with the lcd backlight. We'll just return 0 here
+ * and assume that the fet will eventually come up.
+ */
+ if (ret == -EAGAIN)
+ ret = 0;
+
+ return ret;
+}
+
+int tps65090_fet_disable(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+ ret = tps65090_fet_set(pmic, fet_id, false);
+
+ return ret;
+}
+
+int tps65090_fet_is_enabled(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ u32 reg;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -ENODEV;
+ ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg);
+ if (ret) {
+ debug("fail to read FET%u_CTRL register over I2C", fet_id);
+ return -EIO;
+ }
+
+ return reg & FET_CTRL_ENFET;
+}
+
+int tps65090_get_charging(void)
+{
+ struct pmic *pmic;
+ u32 val;
+ int ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & CG_CTRL0_ENC_MASK);
+}
+
+static int tps65090_charger_state(struct pmic *pmic, int state,
+ int current)
+{
+ u32 val;
+ int ret;
+
+ ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+ if (!ret) {
+ if (state == PMIC_CHARGER_ENABLE)
+ val |= CG_CTRL0_ENC_MASK;
+ else
+ val &= ~CG_CTRL0_ENC_MASK;
+ ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
+ }
+ if (ret) {
+ debug("%s: Failed to read/write register\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+int tps65090_get_status(void)
+{
+ struct pmic *pmic;
+ u32 val;
+ int ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
+ if (ret)
+ return ret;
+
+ return val;
+}
+
+static int tps65090_charger_bat_present(struct pmic *pmic)
+{
+ u32 val;
+ int ret;
+
+ ret = pmic_reg_read(pmic, REG_IRQ1, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & IRQ1_VBATG);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+ .chrg_bat_present = tps65090_charger_bat_present,
+ .chrg_state = tps65090_charger_state,
+};
+
+int tps65090_init(void)
+{
+ struct pmic *p;
+ int bus;
+ int addr;
+ const void *blob = gd->fdt_blob;
+ int node, parent;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
+ if (node < 0) {
+ debug("PMIC: No node for PMIC Chip in device tree\n");
+ debug("node = %d\n", node);
+ return -ENODEV;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -EINVAL;
+ }
+
+ bus = i2c_get_bus_num_fdt(parent);
+ if (p->bus < 0) {
+ debug("%s: Cannot find I2C bus\n", __func__);
+ return -ENOENT;
+ }
+ addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
+ p = pmic_alloc();
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
+
+ p->name = TPS65090_NAME;
+ p->bus = bus;
+ p->interface = PMIC_I2C;
+ p->number_of_regs = TPS65090_NUM_REGS;
+ p->hw.i2c.addr = addr;
+ p->hw.i2c.tx_num = 1;
+ p->chrg = &power_chrg_pmic_ops;
+
+ puts("TPS65090 PMIC init\n");
+
+ return 0;
+}
diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c
new file mode 100644
index 0000000..0952456
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65218.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <power/tps65218.h>
+
+/**
+ * tps65218_reg_write() - Generic function that can write a TPS65218 PMIC
+ * register or bit field regardless of protection
+ * level.
+ *
+ * @prot_level: Register password protection. Use
+ * TPS65218_PROT_LEVEL_NONE,
+ * TPS65218_PROT_LEVEL_1 or TPS65218_PROT_LEVEL_2
+ * @dest_reg: Register address to write.
+ * @dest_val: Value to write.
+ * @mask: Bit mask (8 bits) to be applied. Function will only
+ * change bits that are set in the bit mask.
+ *
+ * @return: 0 for success, not 0 on failure, as per the i2c API
+ */
+int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+ uchar mask)
+{
+ uchar read_val;
+ uchar xor_reg;
+ int ret;
+
+ /*
+ * If we are affecting only a bit field, read dest_reg and apply the
+ * mask
+ */
+ if (mask != TPS65218_MASK_ALL_BITS) {
+ ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
+ if (ret)
+ return ret;
+ read_val &= (~mask);
+ read_val |= (dest_val & mask);
+ dest_val = read_val;
+ }
+
+ if (prot_level > 0) {
+ xor_reg = dest_reg ^ TPS65218_PASSWORD_UNLOCK;
+ ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
+ &xor_reg, 1);
+ if (ret)
+ return ret;
+ }
+
+ ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
+ if (ret)
+ return ret;
+
+ if (prot_level == TPS65218_PROT_LEVEL_2) {
+ ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
+ &xor_reg, 1);
+ if (ret)
+ return ret;
+
+ ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * tps65218_voltage_update() - Function to change a voltage level, as this
+ * is a multi-step process.
+ * @dc_cntrl_reg: DC voltage control register to change.
+ * @volt_sel: New value for the voltage register
+ * @return: 0 for success, not 0 on failure.
+ */
+int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
+{
+ if ((dc_cntrl_reg != TPS65218_DCDC1) &&
+ (dc_cntrl_reg != TPS65218_DCDC2))
+ return 1;
+
+ /* set voltage level */
+ if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, dc_cntrl_reg, volt_sel,
+ TPS65218_MASK_ALL_BITS))
+ return 1;
+
+ /* set GO bit to initiate voltage transition */
+ if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_SLEW,
+ TPS65218_DCDC_GO, TPS65218_DCDC_GO))
+ return 1;
+
+ return 0;
+}
diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index ac0b541..a64161b 100644
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -11,9 +11,9 @@
#include <fsl_pmic.h>
#include <errno.h>
-#if defined(CONFIG_PMIC_FSL_MC13892)
+#if defined(CONFIG_POWER_FSL_MC13892)
#define FSL_PMIC_I2C_LENGTH 3
-#elif defined(CONFIG_PMIC_FSL_MC34704)
+#elif defined(CONFIG_POWER_FSL_MC34704)
#define FSL_PMIC_I2C_LENGTH 1
#endif
@@ -51,7 +51,7 @@ int pmic_init(unsigned char bus)
p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
#else
-#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
+#error "You must select CONFIG_POWER_SPI or CONFIG_POWER_I2C"
#endif
return 0;
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index ac76870..594cd11 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -23,6 +23,8 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
if (check_reg(p, reg))
return -1;
+ I2C_SET_BUS(p->bus);
+
switch (pmic_i2c_tx_num) {
case 3:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
@@ -66,6 +68,8 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
if (check_reg(p, reg))
return -1;
+ I2C_SET_BUS(p->bus);
+
if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num))
return -1;
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index c5d2245..fd7fea8 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -106,6 +106,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
slave->memory_map = (void *)MMAP_START_ADDR_DRA;
#else
slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
+ slave->op_mode_rx = 8;
#endif
memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b45..ad4cbd8 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -329,6 +329,7 @@
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index d5e6c4b..823cba6 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -32,11 +32,15 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
+/* Power */
+#define CONFIG_POWER_TPS65218
+
/* SPL defines. */
#define CONFIG_SPL_TEXT_BASE 0x40300350
#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
+#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
/* Enabling L2 Cache */
@@ -48,15 +52,24 @@
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f. This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_common.h>
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE (128 << 10)
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE (64 << 10)
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -86,6 +99,30 @@
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x30000000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
+#define CONFIG_ENV_OFFSET 0x110000
+#define CONFIG_ENV_OFFSET_REDUND 0x120000
+#ifdef MTDIDS_DEFAULT
+#undef MTDIDS_DEFAULT
+#endif
+#ifdef MTDPARTS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#endif
+#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \
+ "512k(QSPI.u-boot.backup)," \
+ "512k(QSPI.u-boot-spl-os)," \
+ "64k(QSPI.u-boot-env)," \
+ "64k(QSPI.u-boot-env.backup)," \
+ "8m(QSPI.kernel)," \
+ "-(QSPI.file-system)"
+#endif
+
/* SPI */
#undef CONFIG_OMAP3_SPI
#define CONFIG_TI_QSPI
@@ -94,6 +131,7 @@
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_TI_SPI_MMAP
+#define CONFIG_SPI_FLASH_BAR
#define CONFIG_QSPI_SEL_GPIO 48
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -145,6 +183,7 @@
"loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"setenv devnum ${mmcdev}; " \
+ "setenv devtype mmc; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${devnum};" \
"if run loadbootenv; then " \
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..30ecd45 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -224,8 +224,8 @@
/* PMIC */
#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 9ff089e..ae83112 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -76,6 +76,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -87,6 +88,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 7adc8c0..5a37536 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,8 @@
#ifndef __BUR_AM335X_COMMON_H__
#define __BUR_AM335X_COMMON_H__
/* ------------------------------------------------------------------------- */
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_AM33XX
#define CONFIG_OMAP
#define CONFIG_OMAP_COMMON
@@ -94,7 +96,7 @@
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
-
+#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
#define CONFIG_CMD_GPIO
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 26b615b..4d1dd28 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -141,7 +141,6 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
#define CONFIG_CMD_NAND
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
#define MTDIDS_DEFAULT "nand0=nand"
#define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \
"1m(u-boot),1m(u-boot-env)," \
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index aae05e0..8c60e22 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -158,7 +158,6 @@
/* CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
/* Environment information */
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 16a00eb..5308790 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -314,6 +314,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index af6f56b..ce205e9 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -138,6 +138,7 @@
* Board NAND Info.
*/
#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to access nand */
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
index cbd2d20..44e6ab4 100644
--- a/include/configs/exynos4-dt.h
+++ b/include/configs/exynos4-dt.h
@@ -20,6 +20,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
/* Enable fdt support */
#define CONFIG_OF_CONTROL
@@ -44,6 +45,9 @@
#define CONFIG_S5P_SDHCI
#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MMC_DEFAULT_DEV 0
/* PWM */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 5a9b1b4..b830495 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -259,6 +259,7 @@
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
+#define CONFIG_POWER_TPS65090
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index b7ff472..9d1d56a 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -45,7 +45,7 @@
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* PMIC */
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_MAX77686
/* Sound */
#define CONFIG_CMD_SOUND
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index 6255750..0b9e5b6 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -63,6 +63,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -74,6 +75,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index dde7329..6ba7e62 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -71,7 +71,8 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE
+#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
@@ -130,6 +131,7 @@
/* NAND Configuration */
#define CONFIG_NAND_DAVINCI
+#define CONFIG_CMD_NAND_ECCLAYOUT
#define CONFIG_SYS_NAND_CS 2
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index aff2419..d464ad9 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -107,7 +107,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_POWER_FSL_MC34704
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0a46f4c..ab48144 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -52,7 +52,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
#define CONFIG_RTC_MC13XXX
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 5bbae8c..fb2072d 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_RTC_MC13XXX
/* MMC Configs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 12d79b4..a74508c 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -82,7 +82,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_DIALOG_POWER
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0a7df60..c023483 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -295,6 +295,7 @@
#define CONFIG_SPL_OMAP3_ID_NAND
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 7f3424b..ae4ce63 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -120,7 +120,7 @@
/* Max number of NAND devices */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Timeout values (in ticks) */
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index d56d5b0..79daabd 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -187,6 +187,7 @@
/* NAND boot config */
#ifdef CONFIG_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0d03c75..8dcbba3 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -141,6 +141,7 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 7b97be9..1a13633 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -206,6 +206,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 7c5540f..3efe4cf 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -98,6 +98,7 @@
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to access nand at */
/* CS0 */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Environment information */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index fc25966..8510405 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -149,7 +149,6 @@
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
"128k(SPL.backup1)," \
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 799d4fe..fce1716 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -17,6 +17,7 @@
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_MACH_GONI 1 /* working with Goni */
+#include <linux/sizes.h>
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
@@ -38,11 +39,9 @@
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
-/*
- * Size of malloc() pool
- * 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+/* Size of malloc() pool.*/
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M)
+
/*
* select serial console configuration
*/
@@ -72,14 +71,19 @@
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ONENAND
-#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_GPT
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
@@ -90,30 +94,52 @@
",7m(kernel)"\
",1m(log)"\
",12m(modem)"\
- ",60m(qboot)"\
- ",-(UBI)\0"
+ ",60m(qboot)\0"
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTCOMMAND "run ubifsboot"
+/* partitions definitions */
+#define PARTS_CSA "csa-mmc"
+#define PARTS_BOOTLOADER "u-boot"
+#define PARTS_BOOT "boot"
+#define PARTS_ROOT "platform"
+#define PARTS_DATA "data"
+#define PARTS_CSC "csc"
+#define PARTS_UMS "ums"
+
+#define CONFIG_DFU_ALT \
+ "u-boot raw 0x80 0x400;" \
+ "uImage ext4 0 2;" \
+ "exynos3-goni.dtb ext4 0 2;" \
+ ""PARTS_ROOT" part 0 5\0"
+
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+ "name="PARTS_BOOTLOADER",size=60MiB," \
+ "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
+ "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+ "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+ "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+
+#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
+#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
- " rootfstype=cramfs " CONFIG_COMMON_BOOT
+#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \
+ CONFIG_COMMON_BOOT
#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
" onenand write 0x32008000 0x0 0x100000\0"
-#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
-
-#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc"
-
#define CONFIG_MISC_COMMON
#define CONFIG_MISC_INIT_R
@@ -130,42 +156,44 @@
"onenand erase 0x01560000 0x1eaa0000;" \
"onenand write 0x32000000 0x1260000 0x8C0000\0" \
"bootk=" \
- "onenand read 0x30007FC0 0xc00000 0x600000;" \
+ "run loaduimage;" \
"bootm 0x30007FC0\0" \
"flashboot=" \
"set bootargs root=/dev/mtdblock${bootblock} " \
- "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+ "rootfstype=${rootfstype} ${opts} " \
"${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
- CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
- "bootm 0x30007FC0\0" \
+ "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \
+ "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \
"ramboot=" \
"set bootargs " CONFIG_RAMDISK_BOOT \
- " initrd=0x33000000,8M ramdisk=8192\0" \
+ "initrd=0x33000000,8M ramdisk=8192\0" \
"mmcboot=" \
- "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
- CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
- "rootfstype=cramfs\0" \
+ "rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
- "mtdparts=" MTDPARTS_DEFAULT \
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
- "mmcblk=/dev/mmcblk1p1\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+ "mmcdev=0\0" \
+ "mmcbootpart=2\0" \
+ "mmcrootpart=5\0" \
+ "partitions=" PARTS_DEFAULT \
"bootblock=9\0" \
"ubiblock=8\0" \
"ubi=enabled\0" \
- "opts=always_resume=1"
+ "opts=always_resume=1\0" \
+ "dfu_alt_info=" CONFIG_DFU_ALT "\0"
-/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "Goni # "
@@ -202,6 +230,18 @@
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+/* write support for filesystems */
+#define CONFIG_FAT_WRITE
+#define CONFIG_EXT4_WRITE
+
+/* GPT */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_SYS_CACHELINE_SIZE 64
@@ -226,5 +266,8 @@
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
#endif /* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 3522c1a..0c2f0f1 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -185,6 +185,7 @@
/* Configure the PISMO */
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_IS_IN_NAND
#define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
@@ -249,6 +250,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9c04c23..1b0fee9 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -137,10 +137,10 @@
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to access nand at */
/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Environment information */
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h
new file mode 100644
index 0000000..7bd8960
--- /dev/null
+++ b/include/configs/tegra-common-ums.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _TEGRA_COMMON_UMS_H_
+#define _TEGRA_COMMON_UMS_H
+
+#ifndef CONFIG_SPL_BUILD
+/* USB gadget, and mass storage protocol */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CI_UDC
+#define CONFIG_CI_UDC_HAS_HOSTPC
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_G_DNL_VENDOR_NUM 0x0955
+#define CONFIG_G_DNL_PRODUCT_NUM 0x701A
+#define CONFIG_G_DNL_MANUFACTURER "NVIDIA"
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#endif
+
+#endif /* _TEGRA_COMMON_UMS_H */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 128b66e..80976e7 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -75,6 +75,15 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f. This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
#ifdef CONFIG_NAND
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
#endif
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 4854272..6982918 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -196,7 +196,8 @@
* under common/spl/. Given our generally common memory map, we set a
* number of related defaults and sizes here.
*/
-#ifndef CONFIG_NOR_BOOT
+#if !defined(CONFIG_NOR_BOOT) && \
+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_OS_BOOT
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index e550afa..1fd6e32 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -157,7 +157,6 @@
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
index 2d75f50..c4a1b94 100644
--- a/include/configs/venice2.h
+++ b/include/configs/venice2.h
@@ -63,6 +63,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -74,6 +75,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 695bc23..259205e 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -55,7 +55,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
#define CONFIG_RTC_MC13XXX
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c9bdf51..b67f11b 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,9 @@
#define DWMCI_BMOD_IDMAC_FB (1 << 1)
#define DWMCI_BMOD_IDMAC_EN (1 << 7)
+/* UHS register */
+#define DWMCI_DDR_MODE (1 << 16)
+
/* quirks */
#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)
@@ -134,7 +137,9 @@ struct dwmci_host {
unsigned int version;
unsigned int clock;
unsigned int bus_hz;
+ unsigned int div;
int dev_index;
+ int dev_id;
int buswidth;
u32 clksel_val;
u32 fifoth_val;
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 3196cf6..a7e6ee7 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -81,7 +81,7 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
- COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
+ COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */
COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */
COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
@@ -92,6 +92,8 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */
COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */
COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */
+ COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */
+ COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */
COMPAT_COUNT,
};
diff --git a/include/initcall.h b/include/initcall.h
index 2378077..65f67dc 100644
--- a/include/initcall.h
+++ b/include/initcall.h
@@ -6,4 +6,4 @@
typedef int (*init_fnc_t)(void);
-int initcall_run_list(init_fnc_t init_sequence[]);
+int initcall_run_list(const init_fnc_t init_sequence[]);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0546565..991bd8e 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -719,4 +719,23 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
}
#endif
+/**
+ * Check if the opcode's address should be sent only on the lower 8 bits
+ * @command: opcode to check
+ */
+static inline int nand_opcode_8bits(unsigned int command)
+{
+ switch (command) {
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ case NAND_CMD_GET_FEATURES:
+ case NAND_CMD_SET_FEATURES:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/omap_elm.h b/include/linux/mtd/omap_elm.h
index 45454ea..b8096b0 100644
--- a/include/linux/mtd/omap_elm.h
+++ b/include/linux/mtd/omap_elm.h
@@ -24,6 +24,9 @@
#define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100)
#define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F)
+#define ELM_MAX_CHANNELS 8
+#define ELM_MAX_ERROR_COUNT 16
+
#ifndef __ASSEMBLY__
enum bch_level {
@@ -43,7 +46,7 @@ struct syndrome {
struct location {
u32 location_status; /* 0x800 */
u8 res1[124]; /* 0x804 */
- u32 error_location_x[16]; /* 0x880.... */
+ u32 error_location_x[ELM_MAX_ERROR_COUNT]; /* 0x880, 0x980, .. */
u8 res2[64]; /* 0x8c0 */
};
@@ -63,12 +66,12 @@ struct elm {
u8 res2[92]; /* 0x024 */
u32 page_ctrl; /* 0x080 */
u8 res3[892]; /* 0x084 */
- struct syndrome syndrome_fragments[8]; /* 0x400 */
+ struct syndrome syndrome_fragments[ELM_MAX_CHANNELS]; /* 0x400,0x420 */
u8 res4[512]; /* 0x600 */
- struct location error_location[8]; /* 0x800 */
+ struct location error_location[ELM_MAX_CHANNELS]; /* 0x800,0x900 ... */
};
-int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
u32 *error_locations);
int elm_config(enum bch_level level);
void elm_reset(void);
diff --git a/include/linux/mtd/omap_gpmc.h b/include/linux/mtd/omap_gpmc.h
index 22f6573..9a86582 100644
--- a/include/linux/mtd/omap_gpmc.h
+++ b/include/linux/mtd/omap_gpmc.h
@@ -11,6 +11,7 @@
#define GPMC_BUF_EMPTY 0
#define GPMC_BUF_FULL 1
+#define GPMC_MAX_SECTORS 8
enum omap_ecc {
/* 1-bit ECC calculation by Software, Error detection by Software */
@@ -26,6 +27,8 @@ enum omap_ecc {
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH8_CODE_HW,
+ /* 16-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH16_CODE_HW,
};
struct gpmc_cs {
@@ -46,6 +49,10 @@ struct bch_res_0_3 {
u32 bch_result_x[4];
};
+struct bch_res_4_6 {
+ u32 bch_result_x[3];
+};
+
struct gpmc {
u8 res1[0x10];
u32 sysconfig; /* 0x10 */
@@ -75,7 +82,9 @@ struct gpmc {
u8 res7[12]; /* 0x224 */
u32 testmomde_ctrl; /* 0x230 */
u8 res8[12]; /* 0x234 */
- struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */
+ struct bch_res_0_3 bch_result_0_3[GPMC_MAX_SECTORS]; /* 0x240,0x250, */
+ u8 res9[16 * 4]; /* 0x2C0 - 0x2FF */
+ struct bch_res_4_6 bch_result_4_6[GPMC_MAX_SECTORS]; /* 0x300,0x310, */
};
/* Used for board specific gpmc initialization */
diff --git a/include/mmc.h b/include/mmc.h
index a3a100b..f46572e 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -32,15 +32,13 @@
#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-#define MMC_MODE_HS 0x001
-#define MMC_MODE_HS_52MHz 0x010
-#define MMC_MODE_4BIT 0x100
-#define MMC_MODE_8BIT 0x200
-#define MMC_MODE_SPI 0x400
-#define MMC_MODE_HC 0x800
-
-#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
-#define MMC_MODE_WIDTH_BITS_SHIFT 8
+#define MMC_MODE_HS (1 << 0)
+#define MMC_MODE_HS_52MHz (1 << 1)
+#define MMC_MODE_4BIT (1 << 2)
+#define MMC_MODE_8BIT (1 << 3)
+#define MMC_MODE_SPI (1 << 4)
+#define MMC_MODE_HC (1 << 5)
+#define MMC_MODE_DDR_52MHz (1 << 6)
#define SD_DATA_4BIT 0x00040000
@@ -100,9 +98,6 @@
#define SD_HIGHSPEED_BUSY 0x00020000
#define SD_HIGHSPEED_SUPPORTED 0x00020000
-#define MMC_HS_TIMING 0x00000100
-#define MMC_HS_52MHZ 0x2
-
#define OCR_BUSY 0x80000000
#define OCR_HCS 0x40000000
#define OCR_VOLTAGE_MASK 0x007FFF80
@@ -178,10 +173,16 @@
#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2)
+#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3)
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h
index 616d051..3d59e59 100644
--- a/include/power/max77693_pmic.h
+++ b/include/power/max77693_pmic.h
@@ -10,8 +10,6 @@
#include <power/power_chrg.h>
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
-
#define CHARGER_MIN_CURRENT 200
#define CHARGER_MAX_CURRENT 2000
diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h
index 74c5d54..728d60a 100644
--- a/include/power/max8997_pmic.h
+++ b/include/power/max8997_pmic.h
@@ -170,7 +170,6 @@ enum {
#define SAFEOUT_3_30V 0x03
/* Charger */
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
#define DETBAT (1 << 2)
#define MBCICHFCSET (1 << 4)
#define MBCHOSTEN (1 << 6)
diff --git a/include/power/pmic.h b/include/power/pmic.h
index 8f282dd..a62e6c9 100644
--- a/include/power/pmic.h
+++ b/include/power/pmic.h
@@ -17,6 +17,11 @@ enum { I2C_PMIC, I2C_NUM, };
enum { PMIC_READ, PMIC_WRITE, };
enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
+enum {
+ PMIC_CHARGER_DISABLE,
+ PMIC_CHARGER_ENABLE,
+};
+
struct p_i2c {
unsigned char addr;
unsigned char *buf;
diff --git a/include/power/tps65090_pmic.h b/include/power/tps65090_pmic.h
new file mode 100644
index 0000000..dcf99c9
--- /dev/null
+++ b/include/power/tps65090_pmic.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPS65090_PMIC_H_
+#define __TPS65090_PMIC_H_
+
+/* I2C device address for TPS65090 PMU */
+#define TPS65090_I2C_ADDR 0x48
+
+enum {
+ /* Status register fields */
+ TPS65090_ST1_OTC = 1 << 0,
+ TPS65090_ST1_OCC = 1 << 1,
+ TPS65090_ST1_STATE_SHIFT = 4,
+ TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT,
+};
+
+/**
+ * Enable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_enable(unsigned int fet_id);
+
+/**
+ * Disable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_disable(unsigned int fet_id);
+
+/**
+ * Is FET enabled?
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 1 enabled, 0 disabled, negative value on failure
+ */
+int tps65090_fet_is_enabled(unsigned int fet_id);
+
+/**
+ * Enable / disable the battery charger
+ *
+ * @param enable 0 to disable charging, non-zero to enable
+ */
+int tps65090_set_charge_enable(int enable);
+
+/**
+ * Check whether we have enabled battery charging
+ *
+ * @return 1 if enabled, 0 if disabled
+ */
+int tps65090_get_charging(void);
+
+/**
+ * Return the value of the status register
+ *
+ * @return status register value, or -1 on error
+ */
+int tps65090_get_status(void);
+
+/**
+ * Initialize the TPS65090 PMU.
+ *
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_init(void);
+
+#endif /* __TPS65090_PMIC_H_ */
diff --git a/include/power/tps65218.h b/include/power/tps65218.h
new file mode 100644
index 0000000..67aa2f8
--- /dev/null
+++ b/include/power/tps65218.h
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __POWER_TPS65218_H__
+#define __POWER_TPS65218_H__
+
+/* I2C chip address */
+#define TPS65218_CHIP_PM 0x24
+
+/* Registers */
+enum {
+ TPS65218_CHIPID = 0x00,
+ TPS65218_INT1,
+ TPS65218_INT2,
+ TPS65218_INT_MASK1,
+ TPS65218_INT_MASK2,
+ TPS65218_STATUS,
+ TPS65218_CONTROL,
+ TPS65218_FLAG,
+ TPS65218_PASSWORD = 0x10,
+ TPS65218_ENABLE1,
+ TPS65218_ENABLE2,
+ TPS65218_CONFIG1,
+ TPS65218_CONFIG2,
+ TPS65218_CONFIG3,
+ TPS65218_DCDC1,
+ TPS65218_DCDC2,
+ TPS65218_DCDC3,
+ TPS65218_DCDC4,
+ TPS65218_SLEW,
+ TPS65218_LDO1,
+ TPS65218_SEQ1 = 0x20,
+ TPS65218_SEQ2,
+ TPS65218_SEQ3,
+ TPS65218_SEQ4,
+ TPS65218_SEQ5,
+ TPS65218_SEQ6,
+ TPS65218_SEQ7,
+ TPS65218_PMIC_NUM_OF_REGS,
+};
+
+#define TPS65218_PROT_LEVEL_NONE 0x00
+#define TPS65218_PROT_LEVEL_1 0x01
+#define TPS65218_PROT_LEVEL_2 0x02
+
+#define TPS65218_PASSWORD_LOCK_FOR_WRITE 0x00
+#define TPS65218_PASSWORD_UNLOCK 0x7D
+
+#define TPS65218_DCDC_GO 0x80
+
+#define TPS65218_MASK_ALL_BITS 0xFF
+
+#define TPS65218_DCDC_VOLT_SEL_1100MV 0x19
+#define TPS65218_DCDC_VOLT_SEL_1330MV 0x30
+
+int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+ uchar mask);
+int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel);
+#endif /* __POWER_TPS65218_H__ */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 8ecb80f..13d3d2f 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -55,7 +55,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
- COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
+ COMPAT(SAMSUNG_EXYNOS_DWMMC, "samsung,exynos-dwmmc"),
COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"),
COMPAT(SAMSUNG_EXYNOS_SERIAL, "samsung,exynos4210-uart"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
@@ -66,6 +66,8 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"),
COMPAT(SANDBOX_HOST_EMULATION, "sandbox,host-emulation"),
COMPAT(SANDBOX_LCD_SDL, "sandbox,lcd-sdl"),
+ COMPAT(TI_TPS65090, "ti,tps65090"),
+ COMPAT(COMPAT_NXP_PTN3460, "nxp,ptn3460"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
diff --git a/lib/initcall.c b/lib/initcall.c
index fa76dd7..7597bad 100644
--- a/lib/initcall.c
+++ b/lib/initcall.c
@@ -7,15 +7,22 @@
#include <common.h>
#include <initcall.h>
-int initcall_run_list(init_fnc_t init_sequence[])
+DECLARE_GLOBAL_DATA_PTR;
+
+int initcall_run_list(const init_fnc_t init_sequence[])
{
- init_fnc_t *init_fnc_ptr;
+ const init_fnc_t *init_fnc_ptr;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- debug("initcall: %p\n", *init_fnc_ptr);
+ unsigned long reloc_ofs = 0;
+
+ if (gd->flags & GD_FLG_RELOC)
+ reloc_ofs = gd->reloc_off;
+ debug("initcall: %p\n", (char *)*init_fnc_ptr - reloc_ofs);
if ((*init_fnc_ptr)()) {
- debug("initcall sequence %p failed at call %p\n",
- init_sequence, *init_fnc_ptr);
+ printf("initcall sequence %p failed at call %p\n",
+ init_sequence,
+ (char *)*init_fnc_ptr - reloc_ofs);
return -1;
}
}