ppc4xx: Big cleanup of PPC4xx defines

This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>

128 files changed, 2088 insertions, 2399 deletions

diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 8d79be2..0db6199 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -57,7 +57,7 @@ int board_early_init_f(void)
 
 #if !defined(CONFIG_NAND_U_BOOT)
 	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR_PINSTP, reg);
+	mfsdr(SDR0_PINSTP, reg);
 	if (reg != 0xf0000000)
 		board_pll_init_f();
 #endif
@@ -65,18 +65,18 @@ int board_early_init_f(void)
 	acadia_gpio_init();
 
 	/* Configure 405EZ for NAND usage */
-	mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
-	mfsdr(sdrultra0, reg);
+	mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
+	mfsdr(SDR0_ULTRA0, reg);
 	reg &= ~SDR_ULTRA0_CSN_MASK;
 	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
 		SDR_ULTRA0_NDGPIOBP |
 		SDR_ULTRA0_EBCRDYEN |
 		SDR_ULTRA0_NFSRSTEN;
-	mtsdr(sdrultra0, reg);
+	mtsdr(SDR0_ULTRA0, reg);
 
 	/* USB Host core needs this bit set */
-	mfsdr(sdrultra1, reg);
-	mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
+	mfsdr(SDR0_ULTRA1, reg);
+	mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
 
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(uicer, 0x00000000);	/* disable all ints */
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 3e5c80e..8c2addc 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -65,7 +65,7 @@ phys_size_t initdram(int board_type)
 	u32 reg;
 
 	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR_PINSTP, reg);
+	mfsdr(SDR0_PINSTP, reg);
 	if (reg != 0xf0000000)
 		board_pll_init_f();
 #endif
@@ -81,25 +81,25 @@ phys_size_t initdram(int board_type)
 	gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
 
 	/* 2. EBC in Async mode */
-	mtebc(pb1ap, 0x078F1EC0);
-	mtebc(pb2ap, 0x078F1EC0);
-	mtebc(pb1cr, 0x000BC000);
-	mtebc(pb2cr, 0x020BC000);
+	mtebc(PB1AP, 0x078F1EC0);
+	mtebc(PB2AP, 0x078F1EC0);
+	mtebc(PB1CR, 0x000BC000);
+	mtebc(PB2CR, 0x020BC000);
 
 	/* 3. Set CRAM in Sync mode */
 	cram_bcr_write(0x7012);		/* CRAM burst setting */
 
 	/* 4. EBC in Sync mode */
-	mtebc(pb1ap, 0x9C0201C0);
-	mtebc(pb2ap, 0x9C0201C0);
+	mtebc(PB1AP, 0x9C0201C0);
+	mtebc(PB2AP, 0x9C0201C0);
 
 	/* Set GPIO pins back to alternate function */
 	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
 	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
 
 	/* Config EBC to use RDY */
-	mfsdr(sdrultra0, val);
-	mtsdr(sdrultra0, val | SDR_ULTRA0_EBCRDYEN);
+	mfsdr(SDR0_ULTRA0, val);
+	mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN);
 
 	/* Wait a short while, since for NAND booting this is too fast */
 	for (i=0; i<200000; i++)
diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c
index 9dcce35..b63813c 100644
--- a/board/amcc/acadia/pll.c
+++ b/board/amcc/acadia/pll.c
@@ -51,11 +51,11 @@ void board_pll_init_f(void)
 	 */
 
 	/* Initialize PLL */
-	mtcpr(cprpllc, 0x0000033c);
-	mtcpr(cprplld, 0x0c010200);
-	mtcpr(cprprimad, 0x04060c0c);
-	mtcpr(cprperd0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(cprclkupd, 0x40000000);
+	mtcpr(CPR0_PLLC, 0x0000033c);
+	mtcpr(CPR0_PLLD, 0x0c010200);
+	mtcpr(CPC0_PRIMAD, 0x04060c0c);
+	mtcpr(CPC0_PERD0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(CPR0_CLKUP, 0x40000000);
 }
 
 #elif defined(PLLMR0_266_160_80)
@@ -83,13 +83,13 @@ void board_pll_init_f(void)
 	 */
 
 	/* Initialize PLL */
-	mtcpr(cprpllc, 0x20000238);
-	mtcpr(cprplld, 0x03010400);
-	mtcpr(cprprimad, 0x03050a0a);
-	mtcpr(cprperc0, 0x00000000);
-	mtcpr(cprperd0, 0x070a0707);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(cprperd1, 0x07323200);
-	mtcpr(cprclkupd, 0x40000000);
+	mtcpr(CPR0_PLLC, 0x20000238);
+	mtcpr(CPR0_PLLD, 0x03010400);
+	mtcpr(CPC0_PRIMAD, 0x03050a0a);
+	mtcpr(CPC0_PERC0, 0x00000000);
+	mtcpr(CPC0_PERD0, 0x070a0707);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(CPC0_PERD1, 0x07323200);
+	mtcpr(CPR0_CLKUP, 0x40000000);
 }
 
 #elif defined(PLLMR0_333_166_83)
@@ -117,12 +117,12 @@ void board_pll_init_f(void)
 	 */
 
 	/* Initialize PLL */
-	mtcpr(cprpllc, 0x0000033C);
-	mtcpr(cprplld, 0x0a010000);
-	mtcpr(cprprimad, 0x02040808);
-	mtcpr(cprperd0, 0x02080505);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(cprperd1, 0xA6A60300);
-	mtcpr(cprclkupd, 0x40000000);
+	mtcpr(CPR0_PLLC, 0x0000033C);
+	mtcpr(CPR0_PLLD, 0x0a010000);
+	mtcpr(CPC0_PRIMAD, 0x02040808);
+	mtcpr(CPC0_PERD0, 0x02080505);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(CPC0_PERD1, 0xA6A60300);
+	mtcpr(CPR0_CLKUP, 0x40000000);
 }
 
 #elif defined(PLLMR0_100_100_12)
@@ -143,12 +143,12 @@ void board_pll_init_f(void)
 	 */
 
 	/* Initialize PLL */
-	mtcpr(cprpllc, 0x000003BC);
-	mtcpr(cprplld, 0x06060600);
-	mtcpr(cprprimad, 0x02020004);
-	mtcpr(cprperd0, 0x04002828);	/* SPI clk div. eq. OPB clk div. */
-	mtcpr(cprperd1, 0xC8C81600);
-	mtcpr(cprclkupd, 0x40000000);
+	mtcpr(CPR0_PLLC, 0x000003BC);
+	mtcpr(CPR0_PLLD, 0x06060600);
+	mtcpr(CPC0_PRIMAD, 0x02020004);
+	mtcpr(CPC0_PERD0, 0x04002828);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(CPC0_PERD1, 0xC8C81600);
+	mtcpr(CPR0_CLKUP, 0x40000000);
 }
 #endif				/* CPU_<speed>_405EZ */
 
@@ -167,12 +167,12 @@ unsigned long get_tbclk(void)
 	/*
 	 * Read PLL Mode registers
 	 */
-	mfcpr(cprplld, cpr_plld);
+	mfcpr(CPR0_PLLD, cpr_plld);
 
 	/*
 	 * Read CPR_PRIMAD register
 	 */
-	mfcpr(cprprimad, cpr_primad);
+	mfcpr(CPC0_PRIMAD, cpr_primad);
 
 	/*
 	 * Determine CPU clock frequency
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index febc61a..2ffd720 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -487,35 +487,35 @@ int pci_pre_init(struct pci_controller *hose)
 	  | Set priority for all PLB3 devices to 0.
 	  | Set PLB3 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*-------------------------------------------------------------------------+
 	  | Set priority for all PLB4 devices to 0.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*-------------------------------------------------------------------------+
 	  | Set Nebula PLB4 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
@@ -695,8 +695,8 @@ void ext_bus_cntlr_init(void)
 	  |
 	  +-------------------------------------------------------------------------*/
 	/* NVRAM - FPGA */
-	mtebc(pb5ap, EBC0_BNAP_NVRAM_FPGA);
-	mtebc(pb5cr, EBC0_BNCR_NVRAM_FPGA_CS5);
+	mtebc(PB5AP, EBC0_BNAP_NVRAM_FPGA);
+	mtebc(PB5CR, EBC0_BNCR_NVRAM_FPGA_CS5);
 
 	/*-------------------------------------------------------------------------+
 	  |
@@ -749,7 +749,7 @@ void ext_bus_cntlr_init(void)
 		case SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN:
 			/* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
 			/* Read Serial Device Strap Register1 in PPC440EP */
-			mfsdr(sdr_sdstp1, sdr0_sdstp1);
+			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
 			boot_selection	= sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
 			ebc_boot_size	= sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
 
@@ -822,7 +822,7 @@ void ext_bus_cntlr_init(void)
 			/* Default Strap Settings 5-7 */
 			/* Boot Settings in IIC EEprom address 0xA8 or 0xA4 */
 			/* Read Serial Device Strap Register1 in PPC440EP */
-			mfsdr(sdr_sdstp1, sdr0_sdstp1);
+			mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
 			boot_selection	= sdr0_sdstp1 & SDR0_SDSTP1_BOOT_SEL_MASK;
 			ebc_boot_size	= sdr0_sdstp1 & SDR0_SDSTP1_EBC_ROM_BS_MASK;
 
@@ -1013,8 +1013,8 @@ void ext_bus_cntlr_init(void)
 	/*-------------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, EBC0_CFG_EBTC_DRIVEN	   |
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, EBC0_CFG_EBTC_DRIVEN	   |
 	      EBC0_CFG_PTD_ENABLED	  |
 	      EBC0_CFG_RTC_2048PERCLK	  |
 	      EBC0_CFG_EMPL_LOW		  |
@@ -1029,20 +1029,20 @@ void ext_bus_cntlr_init(void)
 	  | Initialize EBC Bank 0-4
 	  +-------------------------------------------------------------------------*/
 	/* EBC Bank0 */
-	mtebc(pb0ap, ebc0_cs0_bnap_value);
-	mtebc(pb0cr, ebc0_cs0_bncr_value);
+	mtebc(PB0AP, ebc0_cs0_bnap_value);
+	mtebc(PB0CR, ebc0_cs0_bncr_value);
 	/* EBC Bank1 */
-	mtebc(pb1ap, ebc0_cs1_bnap_value);
-	mtebc(pb1cr, ebc0_cs1_bncr_value);
+	mtebc(PB1AP, ebc0_cs1_bnap_value);
+	mtebc(PB1CR, ebc0_cs1_bncr_value);
 	/* EBC Bank2 */
-	mtebc(pb2ap, ebc0_cs2_bnap_value);
-	mtebc(pb2cr, ebc0_cs2_bncr_value);
+	mtebc(PB2AP, ebc0_cs2_bnap_value);
+	mtebc(PB2CR, ebc0_cs2_bncr_value);
 	/* EBC Bank3 */
-	mtebc(pb3ap, ebc0_cs3_bnap_value);
-	mtebc(pb3cr, ebc0_cs3_bncr_value);
+	mtebc(PB3AP, ebc0_cs3_bnap_value);
+	mtebc(PB3CR, ebc0_cs3_bncr_value);
 	/* EBC Bank4 */
-	mtebc(pb4ap, ebc0_cs4_bnap_value);
-	mtebc(pb4cr, ebc0_cs4_bncr_value);
+	mtebc(PB4AP, ebc0_cs4_bnap_value);
+	mtebc(PB4CR, ebc0_cs4_bncr_value);
 
 	return;
 }
@@ -1939,10 +1939,10 @@ void configure_ppc440ep_pins(void)
 		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UES_MASK) | SDR0_PFC1_UES_USB2D_SEL;
 		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_UPR_MASK) | SDR0_PFC1_UPR_DISABLE;
 
-		mfsdr(sdr_usb0, sdr0_usb0);
+		mfsdr(SDR0_USB0, sdr0_usb0);
 		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
 		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB20D_DEVSEL;
-		mtsdr(sdr_usb0, sdr0_usb0);
+		mtsdr(SDR0_USB0, sdr0_usb0);
 
 		usb2_device_selection_in_fpga();
 	}
@@ -1950,19 +1950,19 @@ void configure_ppc440ep_pins(void)
 	/* USB1.1 Device Selection */
 	if (ppc440ep_core_selection[USB1_DEVICE] == CORE_SELECTED)
 	{
-		mfsdr(sdr_usb0, sdr0_usb0);
+		mfsdr(SDR0_USB0, sdr0_usb0);
 		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_USB_DEVSEL_MASK;
 		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_USB11D_DEVSEL;
-		mtsdr(sdr_usb0, sdr0_usb0);
+		mtsdr(SDR0_USB0, sdr0_usb0);
 	}
 
 	/* USB1.1 Host Selection */
 	if (ppc440ep_core_selection[USB1_HOST] == CORE_SELECTED)
 	{
-		mfsdr(sdr_usb0, sdr0_usb0);
+		mfsdr(SDR0_USB0, sdr0_usb0);
 		sdr0_usb0 = sdr0_usb0 &~SDR0_USB0_LEEN_MASK;
 		sdr0_usb0 = sdr0_usb0 | SDR0_USB0_LEEN_ENABLE;
-		mtsdr(sdr_usb0, sdr0_usb0);
+		mtsdr(SDR0_USB0, sdr0_usb0);
 	}
 
 	/* NAND Flash Selection */
@@ -1971,14 +1971,14 @@ void configure_ppc440ep_pins(void)
 		update_ndfc_ios(gpio_tab);
 
 #if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
-		mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL   |
+		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL   |
 		      SDR0_CUST0_NDFC_ENABLE	|
 		      SDR0_CUST0_NDFC_BW_8_BIT	|
 		      SDR0_CUST0_NDFC_ARE_MASK	|
 		      SDR0_CUST0_CHIPSELGAT_EN1 |
 		      SDR0_CUST0_CHIPSELGAT_EN2);
 #else
-		mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL   |
+		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL   |
 		      SDR0_CUST0_NDFC_ENABLE	|
 		      SDR0_CUST0_NDFC_BW_8_BIT	|
 		      SDR0_CUST0_NDFC_ARE_MASK	|
@@ -1991,16 +1991,16 @@ void configure_ppc440ep_pins(void)
 	else
 	{
 		/* Set Mux on EMAC */
-		mtsdr(sdr_cust0, SDR0_CUST0_MUX_EMAC_SEL);
+		mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_EMAC_SEL);
 	}
 
 	/* MII Selection */
 	if (ppc440ep_core_selection[MII_SEL] == CORE_SELECTED)
 	{
 		update_zii_ios(gpio_tab);
-		mfsdr(sdr_mfr, sdr0_mfr);
+		mfsdr(SDR0_MFR, sdr0_mfr);
 		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_MII;
-		mtsdr(sdr_mfr, sdr0_mfr);
+		mtsdr(SDR0_MFR, sdr0_mfr);
 
 		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_MII);
 	}
@@ -2009,9 +2009,9 @@ void configure_ppc440ep_pins(void)
 	if (ppc440ep_core_selection[RMII_SEL] == CORE_SELECTED)
 	{
 		update_zii_ios(gpio_tab);
-		mfsdr(sdr_mfr, sdr0_mfr);
+		mfsdr(SDR0_MFR, sdr0_mfr);
 		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
-		mtsdr(sdr_mfr, sdr0_mfr);
+		mtsdr(SDR0_MFR, sdr0_mfr);
 
 		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_RMII);
 	}
@@ -2020,9 +2020,9 @@ void configure_ppc440ep_pins(void)
 	if (ppc440ep_core_selection[SMII_SEL] == CORE_SELECTED)
 	{
 		update_zii_ios(gpio_tab);
-		mfsdr(sdr_mfr, sdr0_mfr);
+		mfsdr(SDR0_MFR, sdr0_mfr);
 		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_SMII;
-		mtsdr(sdr_mfr, sdr0_mfr);
+		mtsdr(SDR0_MFR, sdr0_mfr);
 
 		set_phy_configuration_through_fpga(ZMII_CONFIGURATION_IS_SMII);
 	}
@@ -2071,13 +2071,13 @@ void configure_ppc440ep_pins(void)
 	/* Packet Reject Function Enable */
 	if (ppc440ep_core_selection[PACKET_REJ_FUNC_EN] == CORE_SELECTED)
 	{
-		mfsdr(sdr_mfr, sdr0_mfr);
+		mfsdr(SDR0_MFR, sdr0_mfr);
 		sdr0_mfr = (sdr0_mfr & ~SDR0_MFR_PKT_REJ_MASK) | SDR0_MFR_PKT_REJ_EN;;
-		mtsdr(sdr_mfr, sdr0_mfr);
+		mtsdr(SDR0_MFR, sdr0_mfr);
 	}
 
 	/* Perform effective access to hardware */
-	mtsdr(sdr_pfc1, sdr0_pfc1);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
 	set_chip_gpio_configuration(GPIO0, gpio_tab);
 	set_chip_gpio_configuration(GPIO1, gpio_tab);
 
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index 001348a..7bf877d 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -94,7 +94,7 @@ unsigned long flash_init(void)
 		 * Boot Settings in IIC EEprom address 0xA8 or 0xA4
 		 * Read Serial Device Strap Register1 in PPC440EP
 		 */
-		mfsdr(sdr_sdstp1, val);
+		mfsdr(SDR0_SDSTP1, val);
 		boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
 		ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
 
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
index 74a2a1c..d0aebec 100644
--- a/board/amcc/bubinga/bubinga.c
+++ b/board/amcc/bubinga/bubinga.c
@@ -41,9 +41,9 @@ int board_early_init_f(void)
 	 * and enable the internal PCI arbiter if selected
 	 */
 	if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB)
-		mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+		mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
 	else
-		mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN);
+		mtdcr(CPC0_PCI, CPC0_PCI_HOST_CFG_EN);
 
 	return 0;
 }
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
index a10babb..baf89d5 100644
--- a/board/amcc/bubinga/flash.c
+++ b/board/amcc/bubinga/flash.c
@@ -106,25 +106,25 @@ unsigned long flash_init(void)
 		/* Re-do sizing to get full correct info */
 
 		if (size_b1) {
-			mtdcr(ebccfga, pb0cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb0cr);
+			mtdcr(EBC0_CFGADDR, PB0CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB0CR);
 			base_b1 = -size_b1;
 			pbcr = (pbcr & 0x0001ffff) | base_b1 |
 			    (((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr(ebccfgd, pbcr);
-			/*          printf("pb1cr = %x\n", pbcr); */
+			mtdcr(EBC0_CFGDATA, pbcr);
+			/*          printf("PB1CR = %x\n", pbcr); */
 		}
 
 		if (size_b0) {
-			mtdcr(ebccfga, pb1cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb1cr);
+			mtdcr(EBC0_CFGADDR, PB1CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB1CR);
 			base_b0 = base_b1 - size_b0;
 			pbcr = (pbcr & 0x0001ffff) | base_b0 |
 			    (((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr(ebccfgd, pbcr);
-			/*            printf("pb0cr = %x\n", pbcr); */
+			mtdcr(EBC0_CFGDATA, pbcr);
+			/*            printf("PB0CR = %x\n", pbcr); */
 		}
 
 		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 710a0af..3a03f30 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -475,9 +475,9 @@ int board_early_init_r (void)
 
 	/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
+	mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
 #else
-	mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
+	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
 #endif
 
 	/* Remove TLB entry of boot EBC mapping */
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index ad09e62..2439b03 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -41,30 +41,30 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	reg = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
 
-	mtebc(pb1ap, 0x02815480);	/* NVRAM/RTC */
-	mtebc(pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
-	mtebc(pb7ap, 0x01015280);	/* FPGA registers */
-	mtebc(pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
+	mtebc(PB1AP, 0x02815480);	/* NVRAM/RTC */
+	mtebc(PB1CR, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
+	mtebc(PB7AP, 0x01015280);	/* FPGA registers */
+	mtebc(PB7CR, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
 
 	/* read FPGA_REG0  and set the bus controller */
 	status = *fpga_base;
 	if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
-		mtebc(pb0ap, 0x9b015480);	/* FLASH/SRAM */
-		mtebc(pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
-		mtebc(pb2ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc(pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
+		mtebc(PB0AP, 0x9b015480);	/* FLASH/SRAM */
+		mtebc(PB0CR, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
+		mtebc(PB2AP, 0x9b015480);	/* 4MB FLASH */
+		mtebc(PB2CR, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
 	} else {
-		mtebc(pb0ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc(pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
+		mtebc(PB0AP, 0x9b015480);	/* 4MB FLASH */
+		mtebc(PB0CR, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
 
 		/* set CS2 if FLASH_ONBD_N == 0 */
 		if (!(status & FLASH_ONBD_N)) {
-			mtebc(pb2ap, 0x9b015480);	/* FLASH/SRAM */
-			mtebc(pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
+			mtebc(PB2AP, 0x9b015480);	/* FLASH/SRAM */
+			mtebc(PB2CR, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
 		}
 	}
 
@@ -186,7 +186,7 @@ int pci_pre_init(struct pci_controller *hose)
 	 * The ebony board is always configured as the host & requires the
 	 * PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	strap = mfdcr(cpc0_strp1);
+	strap = mfdcr(CPC0_STRP1);
 	if ((strap & 0x00100000) == 0) {
 		printf("PCI: CPC0_STRP1[PAE] not set.\n");
 		return 0;
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index e078ba4..1a45056 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -220,9 +220,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts*/
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts*/
 
-	mfsdr(sdr_mfr, mfr);
+	mfsdr(SDR0_MFR, mfr);
 	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(sdr_mfr, mfr);
+	mtsdr(SDR0_MFR, mfr);
 
 	mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
 
@@ -280,7 +280,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The katmai board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 7d02d90..71ad89f 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -42,12 +42,12 @@ int board_early_init_f(void)
 {
 	u32 mfr;
 
-	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
-	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
-	mtebc( pb1ap,  0x03800000 );
-	mtebc( pb1cr,  0xff018000 );	/* ebc0_b1cr, 1MB at 0xff000000 CS1 */
-	mtebc( pb2ap,  0x03800000 );
-	mtebc( pb2cr,  0xff838000 );	/* ebc0_b2cr, 2MB at 0xff800000 CS2 */
+	mtebc( PB0AP,  0x03800000 );	/* set chip selects */
+	mtebc( PB0CR,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
+	mtebc( PB1AP,  0x03800000 );
+	mtebc( PB1CR,  0xff018000 );	/* ebc0_b1cr, 1MB at 0xff000000 CS1 */
+	mtebc( PB2AP,  0x03800000 );
+	mtebc( PB2CR,  0xff838000 );	/* ebc0_b2cr, 2MB at 0xff800000 CS2 */
 
 	mtdcr( uic1sr, 0xffffffff );	/* Clear all interrupts */
 	mtdcr( uic1er, 0x00000000 );	/* disable all interrupts */
@@ -67,9 +67,9 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
-	mfsdr(sdr_mfr, mfr);
+	mfsdr(SDR0_MFR, mfr);
 	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(sdr_mfr, mfr);
+	mtsdr(SDR0_MFR, mfr);
 
 	return  0;
 }
@@ -147,7 +147,7 @@ int pci_pre_init( struct pci_controller *hose )
 	 *	The luan board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index fe45408..5e32e8a 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -54,7 +54,7 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------------*/
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
 	      EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
 	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
 	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
@@ -63,14 +63,14 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | FPGA. Initialize bank 7 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
+	mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
 	      EBC_BXAP_BCE_DISABLE|
 	      EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
 	      EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
 	      EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
 	      EBC_BXAP_BEM_WRITEONLY|
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)|
+	mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)|
 	      EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/* read FPGA base register FPGA_REG0 */
@@ -95,53 +95,53 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | 1 MB FLASH / 1 MB SRAM. Initialize bank 0 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)|
+	mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)|
 	      EBC_BXAP_BCE_DISABLE|
 	      EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
 	      EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
 	      EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
 	      EBC_BXAP_BEM_WRITEONLY|
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(cs0_base)|
+	mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(cs0_base)|
 	      cs0_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)|
+	mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)|
 	      EBC_BXAP_BCE_DISABLE|
 	      EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
 	      EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
 	      EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
 	      EBC_BXAP_BEM_WRITEONLY|
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000)|
+	mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000)|
 	      EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | 4 MB FLASH. Initialize bank 2 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb2ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)|
+	mtebc(PB2AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)|
 	      EBC_BXAP_BCE_DISABLE|
 	      EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
 	      EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
 	      EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
 	      EBC_BXAP_BEM_WRITEONLY|
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(cs2_base)|
+	mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(cs2_base)|
 	      cs2_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | FPGA. Initialize bank 7 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
+	mtebc(PB7AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
 	      EBC_BXAP_BCE_DISABLE|
 	      EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
 	      EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
 	      EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
 	      EBC_BXAP_BEM_WRITEONLY|
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)|
+	mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48300000)|
 	      EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/*--------------------------------------------------------------------
@@ -189,9 +189,9 @@ int board_early_init_f (void)
 	mtdcr (uic0pr, 0xfc000000); /* */
 	mtdcr (uic0tr, 0x00000000); /* */
 	mtdcr (uic0vr, 0x00000001); /* */
-	mfsdr (sdr_mfr, mfr);
+	mfsdr (SDR0_MFR, mfr);
 	mfr &= ~SDR0_MFR_ECS_MASK;
-/*	mtsdr(sdr_mfr, mfr); */
+/*	mtsdr(SDR0_MFR, mfr); */
 	fpga_init();
 
 	return 0;
@@ -297,7 +297,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The ocotea board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
@@ -379,8 +379,8 @@ void fpga_init(void)
 	unsigned long sdr0_cust0;
 	unsigned long pvr;
 
-	mfsdr (sdr_pfc0, sdr0_pfc0);
-	mfsdr (sdr_pfc1, sdr0_pfc1);
+	mfsdr (SDR0_PFC0, sdr0_pfc0);
+	mfsdr (SDR0_PFC1, sdr0_pfc1);
 	group = SDR0_PFC1_EPS_DECODE(sdr0_pfc1);
 	pvr = get_pvr ();
 
@@ -390,8 +390,8 @@ void fpga_init(void)
 		sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS;
 		out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
 		     FPGA_REG2_EXT_INTFACE_ENABLE);
-		mtsdr (sdr_pfc0, sdr0_pfc0);
-		mtsdr (sdr_pfc1, sdr0_pfc1);
+		mtsdr (SDR0_PFC0, sdr0_pfc0);
+		mtsdr (SDR0_PFC1, sdr0_pfc1);
 	} else {
 		sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_ENABLE;
 		switch (group)
@@ -403,8 +403,8 @@ void fpga_init(void)
 			out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
 			     FPGA_REG2_EXT_INTFACE_ENABLE);
 			sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS;
-			mtsdr (sdr_pfc0, sdr0_pfc0);
-			mtsdr (sdr_pfc1, sdr0_pfc1);
+			mtsdr (SDR0_PFC0, sdr0_pfc0);
+			mtsdr (SDR0_PFC1, sdr0_pfc1);
 			break;
 		case 3:
 		case 4:
@@ -412,8 +412,8 @@ void fpga_init(void)
 		case 6:
 			/* CPU trace B - Over EBMI */
 			sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_CPUTRACE;
-			mtsdr (sdr_pfc0, sdr0_pfc0);
-			mtsdr (sdr_pfc1, sdr0_pfc1);
+			mtsdr (SDR0_PFC0, sdr0_pfc0);
+			mtsdr (SDR0_PFC1, sdr0_pfc1);
 			out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
 			     FPGA_REG2_EXT_INTFACE_DISABLE);
 			break;
@@ -421,8 +421,8 @@ void fpga_init(void)
 	}
 
 	/* Initialize the ethernet specific functions in the fpga */
-	mfsdr(sdr_pfc1, sdr0_pfc1);
-	mfsdr(sdr_cust0, sdr0_cust0);
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	mfsdr(SDR0_CUST0, sdr0_cust0);
 	if ( (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) == 4) &&
 	    ((SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII) ||
 	     (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_TBI)))
diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c
index 37a0c31..49078eb 100644
--- a/board/amcc/redwood/redwood.c
+++ b/board/amcc/redwood/redwood.c
@@ -220,7 +220,7 @@ static void early_init_EBC(void)
 	 * default value :
 	 *      0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
 	 */
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
 	      EBC_CFG_PTD_ENABLE |
 	      EBC_CFG_RTC_16PERCLK |
 	      EBC_CFG_ATC_PREVIOUS |
@@ -237,8 +237,8 @@ static void early_init_EBC(void)
 	 * since some board registers values may be needed to determine the
 	 * boot type
 	 */
-	mtebc(pb1ap, EBC_BXAP_FPGA);
-	mtebc(pb1cr, EBC_BXCR_FPGA_CS3);
+	mtebc(PB1AP, EBC_BXAP_FPGA);
+	mtebc(PB1CR, EBC_BXCR_FPGA_CS3);
 
 }
 
@@ -399,12 +399,12 @@ static void early_reinit_EBC(int computed_boot_device)
 		break;
 	}
 
-	mtebc(pb0ap, ebc0_cs0_bxap_value);
-	mtebc(pb0cr, ebc0_cs0_bxcr_value);
-	mtebc(pb1ap, ebc0_cs1_bxap_value);
-	mtebc(pb1cr, ebc0_cs1_bxcr_value);
-	mtebc(pb2ap, ebc0_cs2_bxap_value);
-	mtebc(pb2cr, ebc0_cs2_bxcr_value);
+	mtebc(PB0AP, ebc0_cs0_bxap_value);
+	mtebc(PB0CR, ebc0_cs0_bxcr_value);
+	mtebc(PB1AP, ebc0_cs1_bxap_value);
+	mtebc(PB1CR, ebc0_cs1_bxcr_value);
+	mtebc(PB2AP, ebc0_cs2_bxap_value);
+	mtebc(PB2CR, ebc0_cs2_bxcr_value);
 }
 
 static void early_init_UIC(void)
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 246ad94..5913455 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -46,8 +46,8 @@ int board_early_init_f(void)
 	u32 sdr0_pfc1, sdr0_pfc2;
 	u32 reg;
 
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xb8400000);
 
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -107,8 +107,8 @@ int board_early_init_f(void)
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
 	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);
 
 	/* setup NAND FLASH */
 	mfsdr(SDR0_CUST0, sdr0_cust0);
@@ -144,19 +144,19 @@ int misc_init_r(void)
 	gd->bd->bi_flashoffset = 0;
 
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb3cr);
+	mtdcr(EBC0_CFGADDR, PB3CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	pbcr = mfdcr(ebccfgd);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb3cr);
+	mtdcr(EBC0_CFGADDR, PB3CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -309,8 +309,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 	return 0;
 }
@@ -370,35 +370,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 #ifdef CONFIG_PCI_PNP
 	hose->fixup_irq = sequoia_pci_fixup_irq;
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index d8806ac..4e5796e 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -48,14 +48,14 @@ int board_early_init_f(void)
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
 
-	mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
-	mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
+	mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
+	mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
 
 	/*
 	 * Configure CPC0_PCI to enable PerWE as output
 	 * and enable the internal PCI arbiter
 	 */
-	mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+	mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
 
 	return 0;
 }
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index 2a78a22..e4e441b 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -33,60 +33,60 @@ void show_reset_reg(void)
 
 	/* read clock regsiter */
 	printf("===== Display reset and initialize register Start =========\n");
-	mfcpr(clk_pllc,reg);
+	mfcpr(CPR0_PLLC,reg);
 	printf("cpr_pllc   = %#010lx\n",reg);
 
-	mfcpr(clk_plld,reg);
+	mfcpr(CPR0_PLLD,reg);
 	printf("cpr_plld   = %#010lx\n",reg);
 
-	mfcpr(clk_primad,reg);
+	mfcpr(CPR0_PRIMAD,reg);
 	printf("cpr_primad = %#010lx\n",reg);
 
-	mfcpr(clk_primbd,reg);
+	mfcpr(CPR0_PRIMBD,reg);
 	printf("cpr_primbd = %#010lx\n",reg);
 
-	mfcpr(clk_opbd,reg);
+	mfcpr(CPR0_OPBD,reg);
 	printf("cpr_opbd   = %#010lx\n",reg);
 
-	mfcpr(clk_perd,reg);
+	mfcpr(CPR0_PERD,reg);
 	printf("cpr_perd   = %#010lx\n",reg);
 
-	mfcpr(clk_mald,reg);
+	mfcpr(CPR0_MALD,reg);
 	printf("cpr_mald   = %#010lx\n",reg);
 
 	/* read sdr register */
-	mfsdr(sdr_ebc,reg);
-	printf("sdr_ebc    = %#010lx\n",reg);
+	mfsdr(SDR0_EBC,reg);
+	printf("SDR0_EBC    = %#010lx\n",reg);
 
-	mfsdr(sdr_cp440,reg);
-	printf("sdr_cp440  = %#010lx\n",reg);
+	mfsdr(SDR0_CP440,reg);
+	printf("SDR0_CP440  = %#010lx\n",reg);
 
-	mfsdr(sdr_xcr,reg);
-	printf("sdr_xcr    = %#010lx\n",reg);
+	mfsdr(SDR0_XCR,reg);
+	printf("SDR0_XCR    = %#010lx\n",reg);
 
-	mfsdr(sdr_xpllc,reg);
-	printf("sdr_xpllc  = %#010lx\n",reg);
+	mfsdr(SDR0_XPLLC,reg);
+	printf("SDR0_XPLLC  = %#010lx\n",reg);
 
-	mfsdr(sdr_xplld,reg);
-	printf("sdr_xplld  = %#010lx\n",reg);
+	mfsdr(SDR0_XPLLD,reg);
+	printf("SDR0_XPLLD  = %#010lx\n",reg);
 
-	mfsdr(sdr_pfc0,reg);
-	printf("sdr_pfc0   = %#010lx\n",reg);
+	mfsdr(SDR0_PFC0,reg);
+	printf("SDR0_PFC0   = %#010lx\n",reg);
 
-	mfsdr(sdr_pfc1,reg);
-	printf("sdr_pfc1   = %#010lx\n",reg);
+	mfsdr(SDR0_PFC1,reg);
+	printf("SDR0_PFC1   = %#010lx\n",reg);
 
-	mfsdr(sdr_cust0,reg);
-	printf("sdr_cust0  = %#010lx\n",reg);
+	mfsdr(SDR0_CUST0,reg);
+	printf("SDR0_CUST0  = %#010lx\n",reg);
 
-	mfsdr(sdr_cust1,reg);
-	printf("sdr_cust1  = %#010lx\n",reg);
+	mfsdr(SDR0_CUST1,reg);
+	printf("SDR0_CUST1  = %#010lx\n",reg);
 
-	mfsdr(sdr_uart0,reg);
-	printf("sdr_uart0  = %#010lx\n",reg);
+	mfsdr(SDR0_UART0,reg);
+	printf("SDR0_UART0  = %#010lx\n",reg);
 
-	mfsdr(sdr_uart1,reg);
-	printf("sdr_uart1  = %#010lx\n",reg);
+	mfsdr(SDR0_UART1,reg);
+	printf("SDR0_UART1  = %#010lx\n",reg);
 
 	printf("===== Display reset and initialize register End   =========\n");
 }
@@ -96,14 +96,14 @@ void show_xbridge_info(void)
 	unsigned long reg;
 
 	printf("PCI-X chip control registers\n");
-	mfsdr(sdr_xcr, reg);
-	printf("sdr_xcr    = %#010lx\n", reg);
+	mfsdr(SDR0_XCR, reg);
+	printf("SDR0_XCR    = %#010lx\n", reg);
 
-	mfsdr(sdr_xpllc, reg);
-	printf("sdr_xpllc  = %#010lx\n", reg);
+	mfsdr(SDR0_XPLLC, reg);
+	printf("SDR0_XPLLC  = %#010lx\n", reg);
 
-	mfsdr(sdr_xplld, reg);
-	printf("sdr_xplld  = %#010lx\n", reg);
+	mfsdr(SDR0_XPLLD, reg);
+	printf("SDR0_XPLLD  = %#010lx\n", reg);
 
 	printf("PCI-X Bridge Configure registers\n");
 	printf("PCIX0_VENDID            = %#06x\n", in16r(PCIX0_VENDID));
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index 53ce88c..086778a 100644
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -47,7 +47,7 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------------*/
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
 	      EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
 	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
 	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT |
@@ -56,66 +56,66 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------+
 	  | 64MB FLASH. Initialize bank 0 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) |
+	mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) |
 	      EBC_BXAP_BCE_DISABLE |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
 	      EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
 	      EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
 	      EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
+	mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | FPGA. Initialize bank 1 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) |
+	mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) |
 	      EBC_BXAP_BCE_DISABLE |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
 	      EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
 	      EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
 	      EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x41000000) |
+	mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x41000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | LCM. Initialize bank 2 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb2ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) |
+	mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) |
 	      EBC_BXAP_BCE_DISABLE |
 	      EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
 	      EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
 	      EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0x42000000) |
+	mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0x42000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | TMP. Initialize bank 3 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb3ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) |
+	mtebc(PB3AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) |
 	      EBC_BXAP_BCE_DISABLE |
 	      EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
 	      EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
 	      EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+	mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
 	      EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*-------------------------------------------------------------------------+
 	  | Connector 4~7. Initialize bank 3~ 7 with default values.
 	  +-------------------------------------------------------------------------*/
-	mtebc(pb4ap,0);
-	mtebc(pb4cr,0);
-	mtebc(pb5ap,0);
-	mtebc(pb5cr,0);
-	mtebc(pb6ap,0);
-	mtebc(pb6cr,0);
-	mtebc(pb7ap,0);
-	mtebc(pb7cr,0);
+	mtebc(PB4AP,0);
+	mtebc(PB4CR,0);
+	mtebc(PB5AP,0);
+	mtebc(PB5CR,0);
+	mtebc(PB6AP,0);
+	mtebc(PB6CR,0);
+	mtebc(PB7AP,0);
+	mtebc(PB7CR,0);
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -164,13 +164,13 @@ int board_early_init_f (void)
 	mtdcr (uic0vr, 0x00000001);	/* */
 
 	/* Enable two GPIO 10~11 and TraceA signal */
-	mfsdr(sdr_pfc0,reg);
+	mfsdr(SDR0_PFC0,reg);
 	reg |= 0x00300000;
-	mtsdr(sdr_pfc0,reg);
+	mtsdr(SDR0_PFC0,reg);
 
-	mfsdr(sdr_pfc1,reg);
+	mfsdr(SDR0_PFC1,reg);
 	reg |= 0x00100000;
-	mtsdr(sdr_pfc1,reg);
+	mtsdr(SDR0_PFC1,reg);
 
 	/* Set GPIO 10 and 11 as output */
 	GpioOdr	= (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718);
@@ -230,7 +230,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The ocotea board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
index d363564..3dc6aab 100644
--- a/board/amcc/walnut/flash.c
+++ b/board/amcc/walnut/flash.c
@@ -102,27 +102,27 @@ unsigned long flash_init(void)
 		/* Re-do sizing to get full correct info */
 
 		if (size_b1) {
-			mtdcr(ebccfga, pb0cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb0cr);
+			mtdcr(EBC0_CFGADDR, PB0CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB0CR);
 			base_b1 = -size_b1;
 			pbcr =
 			    (pbcr & 0x0001ffff) | base_b1 |
 			    (((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr(ebccfgd, pbcr);
-			/*          printf("pb1cr = %x\n", pbcr); */
+			mtdcr(EBC0_CFGDATA, pbcr);
+			/*          printf("PB1CR = %x\n", pbcr); */
 		}
 
 		if (size_b0) {
-			mtdcr(ebccfga, pb1cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb1cr);
+			mtdcr(EBC0_CFGADDR, PB1CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB1CR);
 			base_b0 = base_b1 - size_b0;
 			pbcr =
 			    (pbcr & 0x0001ffff) | base_b0 |
 			    (((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr(ebccfgd, pbcr);
-			/*            printf("pb0cr = %x\n", pbcr); */
+			mtdcr(EBC0_CFGDATA, pbcr);
+			/*            printf("PB0CR = %x\n", pbcr); */
 		}
 
 		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 3982896..2a654fa 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -40,9 +40,9 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	reg = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
 
 	/*--------------------------------------------------------------------
 	 * Setup the GPIO pins
@@ -101,10 +101,10 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup other serial configuration
 	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(SDR0_PFC0, 0x00003e00);	/* Pin function */
+	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins */
 
 	/*clear tmrclk divisor */
 	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00;
@@ -129,8 +129,8 @@ int misc_init_r (void)
 	int size_val = 0;
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	switch (gd->bd->bi_flashsize) {
 	case 1 << 20:
 		size_val = 0;
@@ -158,8 +158,8 @@ int misc_init_r (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -353,35 +353,35 @@ int pci_pre_init(struct pci_controller *hose)
 	  | Set priority for all PLB3 devices to 0.
 	  | Set PLB3 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*-------------------------------------------------------------------------+
 	  | Set priority for all PLB4 devices to 0.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*-------------------------------------------------------------------------+
 	  | Set Nebula PLB4 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
index eda49eb..33b97a5 100644
--- a/board/amcc/yucca/flash.c
+++ b/board/amcc/yucca/flash.c
@@ -981,7 +981,7 @@ unsigned long flash_init(void)
 		 * Boot Settings in IIC EEprom address 0xA8 or 0xA0
 		 * Read Serial Device Strap Register1 in PPC440SPe
 		 */
-		mfsdr(sdr_sdstp1, val);
+		mfsdr(SDR0_SDSTP1, val);
 		boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
 		ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
 
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 06c7d62..245004c 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -167,7 +167,7 @@ int board_early_init_f (void)
 	 |	0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
 	 |
 	 +-------------------------------------------------------------------*/
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
 			EBC_CFG_PTD_ENABLE |
 			EBC_CFG_RTC_16PERCLK |
 			EBC_CFG_ATC_PREVIOUS |
@@ -188,8 +188,8 @@ int board_early_init_f (void)
 	 | boot type
 	 |
 	 +-------------------------------------------------------------------*/
-	mtebc(pb1ap, EBC_BXAP_FPGA);
-	mtebc(pb1cr, EBC_BXCR_FPGA_CS1);
+	mtebc(PB1AP, EBC_BXAP_FPGA);
+	mtebc(PB1CR, EBC_BXCR_FPGA_CS1);
 
 	/*-------------------------------------------------------------------+
 	 |
@@ -334,10 +334,10 @@ int board_early_init_f (void)
 			break;
 	}
 
-	mtebc(pb0ap, ebc0_cs0_bxap_value);
-	mtebc(pb0cr, ebc0_cs0_bxcr_value);
-	mtebc(pb2ap, ebc0_cs2_bxap_value);
-	mtebc(pb2cr, ebc0_cs2_bxcr_value);
+	mtebc(PB0AP, ebc0_cs0_bxap_value);
+	mtebc(PB0CR, ebc0_cs0_bxcr_value);
+	mtebc(PB2AP, ebc0_cs2_bxap_value);
+	mtebc(PB2CR, ebc0_cs2_bxcr_value);
 
 	/*--------------------------------------------------------------------+
 	 | Interrupt controller setup for the AMCC 440SPe Evaluation board.
@@ -530,9 +530,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
 
-	mfsdr(sdr_mfr, mfr);
+	mfsdr(SDR0_MFR, mfr);
 	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
-	mtsdr(sdr_mfr, mfr);
+	mtsdr(SDR0_MFR, mfr);
 
 	fpga_init();
 
@@ -608,7 +608,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The yucca board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 8a06ecc..5d1c417 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -198,8 +198,8 @@ static void init_sdram (void)
  unsigned long tmp;
 
 	/* write SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, 0x00062001);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	mtdcr (SDRAM0_CFGDATA, 0x00062001);
 
 /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.	*/
 /* To set the appropriate timings, we need to know the SDRAM speed.	*/
@@ -212,26 +212,26 @@ static void init_sdram (void)
 	/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
 
 /* write SDRAM timing for 100MHz. */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, 0x0086400D);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	mtdcr (SDRAM0_CFGDATA, 0x0086400D);
 
 /* write SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, 0x05F00000);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	mtdcr (SDRAM0_CFGDATA, 0x05F00000);
 	udelay (200);
 
 /* sdram controller.*/
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, 0x90800000);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	mtdcr (SDRAM0_CFGDATA, 0x90800000);
 	udelay (200);
 
 /* initially, disable ECC on all banks */
 	udelay (200);
-	mtdcr (memcfga, mem_ecccf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	tmp &= 0xff0fffff;
-	mtdcr (memcfga, mem_ecccf);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 
 	return;
 }
@@ -282,18 +282,18 @@ int testdram (void)
 	}
 	printf ("Enable ECC..");
 
-	mtdcr (memcfga, mem_mcopt1);
-	tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000;
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000;
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 	udelay (600);
 	for (p = (unsigned long) 0; ((unsigned long) p < L1_MEMSIZE); *p++ = 0L)
 		;
 	udelay (400);
-	mtdcr (memcfga, mem_ecccf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	tmp |= 0x00800000;
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 	udelay (400);
 	printf ("enabled.\n");
 	return (0);
diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S
index d700ea7..e8dbb93 100644
--- a/board/cray/L1/init.S
+++ b/board/cray/L1/init.S
@@ -87,17 +87,17 @@ ext_bus_cntlr_init:
 	/* Peripheral Bank 0 (Flash) initialization */
 	/*---------------------------------------------------------------------- */
 		/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0x9B01
 	ori     r4,r4,0x5480
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0xFFC5           /* BAS=0xFFC,BS=0x4(4MB),BU=0x3(R/W), */
 	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	blr
 
@@ -125,16 +125,16 @@ ext_bus_cntlr_init:
 		/* all reserved bits=0 */
 	/*---------------------------------------------------------------------- */
 	/*---------------------------------------------------------------------- */
-	addi    r4,0,pb1ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0x0185		/* hiword */
 	ori     r4,r4,0x4380	/* loword */
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb1cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0xF001           /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W), */
 	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	blr
diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index 11596d2..cb24cd4 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -95,7 +95,7 @@ int board_early_init_f(void)
 	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
 	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
 
-	mtebc (epcr, 0xa8400000);   /* EBC always driven */
+	mtebc (EBC0_CFG, 0xa8400000);   /* EBC always driven */
 
 	return 0; /* success */
 }
@@ -135,29 +135,29 @@ phys_size_t initdram (int board_type)
 
 	tot_size = 0;
 
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
diff --git a/board/csb272/init.S b/board/csb272/init.S
index 1cfef37..15b26f8 100644
--- a/board/csb272/init.S
+++ b/board/csb272/init.S
@@ -38,17 +38,17 @@
 
 #define WDCR_EBC(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
+	mtdcr   EBC0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 #define WDCR_SDRAM(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   memcfga,r4;\
+	mtdcr   SDRAM0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 /******************************************************************************
  * Function:	ext_bus_cntlr_init
@@ -106,51 +106,51 @@ ext_bus_cntlr_init:
 	 * SETUP CPC0_CR0
 	 *******************************************************************/
 	LI32(r4, 0x007000c0)
-	mtdcr	cntrl0, r4
+	mtdcr	CPC0_CR0, r4
 
 	/********************************************************************
 	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
 	 *******************************************************************/
-	mfdcr	r4, cntrl1
+	mfdcr	r4, CPC0_CR1
 	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
+	mtdcr	CPC0_CR1, r4
 
 	/********************************************************************
 	 * Setup External Bus Controller (EBC).
 	 *******************************************************************/
-	WDCR_EBC(epcr, 0xd84c0000)
+	WDCR_EBC(EBC0_CFG, 0xd84c0000)
 	/********************************************************************
 	 * Memory Bank 0 (Intel 28F128J3 Flash) initialization
 	 *******************************************************************/
-	/*WDCR_EBC(pb0ap, 0x02869200)*/
-	WDCR_EBC(pb0ap, 0x07869200)
-	WDCR_EBC(pb0cr, 0xfe0bc000)
+	/*WDCR_EBC(PB1AP, 0x02869200)*/
+	WDCR_EBC(PB1AP, 0x07869200)
+	WDCR_EBC(PB0CR, 0xfe0bc000)
 	/********************************************************************
 	 * Memory Bank 1 (Holtek HT6542B PS/2) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb1ap, 0x1f869200)
-	WDCR_EBC(pb1cr, 0xf0818000)
+	WDCR_EBC(PB1AP, 0x1f869200)
+	WDCR_EBC(PB1CR, 0xf0818000)
 	/********************************************************************
 	 * Memory Bank 2 (Epson S1D13506) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb2ap, 0x05860300)
-	WDCR_EBC(pb2cr, 0xf045a000)
+	WDCR_EBC(PB2AP, 0x05860300)
+	WDCR_EBC(PB2CR, 0xf045a000)
 	/********************************************************************
 	 * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb3ap, 0x0387d200)
-	WDCR_EBC(pb3cr, 0xf021c000)
+	WDCR_EBC(PB3AP, 0x0387d200)
+	WDCR_EBC(PB3CR, 0xf021c000)
 	/********************************************************************
 	 * Memory Bank 4-7 (Unused) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb4ap, 0)
-	WDCR_EBC(pb4cr, 0)
-	WDCR_EBC(pb5ap, 0)
-	WDCR_EBC(pb5cr, 0)
-	WDCR_EBC(pb6ap, 0)
-	WDCR_EBC(pb6cr, 0)
-	WDCR_EBC(pb7ap, 0)
-	WDCR_EBC(pb7cr, 0)
+	WDCR_EBC(PB4AP, 0)
+	WDCR_EBC(PB4CR, 0)
+	WDCR_EBC(PB5AP, 0)
+	WDCR_EBC(PB5CR, 0)
+	WDCR_EBC(PB6AP, 0)
+	WDCR_EBC(PB6CR, 0)
+	WDCR_EBC(PB7AP, 0)
+	WDCR_EBC(PB7CR, 0)
 
 	/* We are all done */
 	mtlr	r0			/* Restore link register */
diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c
index 9dc130e..fa0fa19 100644
--- a/board/csb472/csb472.c
+++ b/board/csb472/csb472.c
@@ -63,7 +63,7 @@ int board_early_init_f(void)
 	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
 	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
 
-	mtebc (epcr, 0xa8400000);   /* EBC always driven */
+	mtebc (EBC0_CFG, 0xa8400000);   /* EBC always driven */
 
 	return 0; /* success */
 }
@@ -103,29 +103,29 @@ phys_size_t initdram (int board_type)
 
 	tot_size = 0;
 
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
diff --git a/board/csb472/init.S b/board/csb472/init.S
index 2cf8afc..105cb71 100644
--- a/board/csb472/init.S
+++ b/board/csb472/init.S
@@ -38,17 +38,17 @@
 
 #define WDCR_EBC(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
+	mtdcr   EBC0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 #define WDCR_SDRAM(reg,val) \
 	addi    r4,0,reg;\
-	mtdcr   memcfga,r4;\
+	mtdcr   SDRAM0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 /******************************************************************************
  * Function:	ext_bus_cntlr_init
@@ -106,47 +106,47 @@ ext_bus_cntlr_init:
 	 * SETUP CPC0_CR0
 	 *******************************************************************/
 	LI32(r4, 0x00c01030)
-	mtdcr	cntrl0, r4
+	mtdcr	CPC0_CR0, r4
 
 	/********************************************************************
 	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
 	 *******************************************************************/
-	mfdcr	r4, cntrl1
+	mfdcr	r4, CPC0_CR1
 	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
+	mtdcr	CPC0_CR1, r4
 
 	/********************************************************************
 	 * Setup External Bus Controller (EBC).
 	 *******************************************************************/
-	WDCR_EBC(epcr, 0xd84c0000)
+	WDCR_EBC(EBC0_CFG, 0xd84c0000)
 	/********************************************************************
 	 * Memory Bank 0 (Intel 28F640J3 Flash) initialization
 	 *******************************************************************/
-	/*WDCR_EBC(pb0ap, 0x03055200)*/
-	/*WDCR_EBC(pb0ap, 0x04055200)*/
-	WDCR_EBC(pb0ap, 0x08055200)
-	WDCR_EBC(pb0cr, 0xff87a000)
+	/*WDCR_EBC(PB1AP, 0x03055200)*/
+	/*WDCR_EBC(PB1AP, 0x04055200)*/
+	WDCR_EBC(PB1AP, 0x08055200)
+	WDCR_EBC(PB0CR, 0xff87a000)
 	/********************************************************************
 	 * Memory Bank 3 (Xilinx XC95144 CPLD) initialization
 	 *******************************************************************/
-	/*WDCR_EBC(pb3ap, 0x07869200)*/
-	WDCR_EBC(pb3ap, 0x04055200)
-	WDCR_EBC(pb3cr, 0xf081c000)
+	/*WDCR_EBC(PB3AP, 0x07869200)*/
+	WDCR_EBC(PB3AP, 0x04055200)
+	WDCR_EBC(PB3CR, 0xf081c000)
 	/********************************************************************
 	 * Memory Bank 1,2,4-7 (Unused) initialization
 	 *******************************************************************/
-	WDCR_EBC(pb1ap, 0)
-	WDCR_EBC(pb1cr, 0)
-	WDCR_EBC(pb2ap, 0)
-	WDCR_EBC(pb2cr, 0)
-	WDCR_EBC(pb4ap, 0)
-	WDCR_EBC(pb4cr, 0)
-	WDCR_EBC(pb5ap, 0)
-	WDCR_EBC(pb5cr, 0)
-	WDCR_EBC(pb6ap, 0)
-	WDCR_EBC(pb6cr, 0)
-	WDCR_EBC(pb7ap, 0)
-	WDCR_EBC(pb7cr, 0)
+	WDCR_EBC(PB1AP, 0)
+	WDCR_EBC(PB1CR, 0)
+	WDCR_EBC(PB2AP, 0)
+	WDCR_EBC(PB2CR, 0)
+	WDCR_EBC(PB4AP, 0)
+	WDCR_EBC(PB4CR, 0)
+	WDCR_EBC(PB5AP, 0)
+	WDCR_EBC(PB5CR, 0)
+	WDCR_EBC(PB6AP, 0)
+	WDCR_EBC(PB6CR, 0)
+	WDCR_EBC(PB7AP, 0)
+	WDCR_EBC(PB7CR, 0)
 
 	/* We are all done */
 	mtlr	r0			/* Restore link register */
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index a6aa655..56751e1 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -65,9 +65,9 @@ int board_early_init_f (void)
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
 #if 1 /* test-only */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 #else
-	mtebc (epcr, 0x28400000); /* ebc in high-z */
+	mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */
 #endif
 	return 0;
 }
@@ -101,7 +101,7 @@ int misc_init_r (void)
 	int status;
 	int index;
 	int i;
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index e5a0d3d..237c807 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -75,9 +75,9 @@ unsigned long flash_init (void)
 	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base = -size;
 	switch (size) {
 	case 1 << 20:
@@ -97,7 +97,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
 
 	/* Monitor protection ON by default */
diff --git a/board/eric/eric.c b/board/eric/eric.c
index 600b9d7..bc2a907 100644
--- a/board/eric/eric.c
+++ b/board/eric/eric.c
@@ -70,7 +70,7 @@ int board_early_init_f (void)
 	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
 	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
 
-	mtdcr (cntrl0, 0x00002000);	/* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
+	mtdcr (CPC0_CR0, 0x00002000);	/* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
 
 	out32 (PPC405GP_GPIO0_OR, 0x60000000);	/*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
 	out32 (PPC405GP_GPIO0_TCR, 0x7E400000);
diff --git a/board/eric/flash.c b/board/eric/flash.c
index 7e57513..fded412 100644
--- a/board/eric/flash.c
+++ b/board/eric/flash.c
@@ -105,24 +105,24 @@ unsigned long flash_init (void)
 
 	    if (size_b1)
 	      {
-		mtdcr(ebccfga, pb0cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb0cr);
+		mtdcr(EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr(EBC0_CFGDATA);
+		mtdcr(EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
+		mtdcr(EBC0_CFGDATA, pbcr);
+		/*          printf("PB1CR = %x\n", pbcr); */
 	      }
 
 	    if (size_b0)
 	      {
-		mtdcr(ebccfga, pb1cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb1cr);
+		mtdcr(EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr(EBC0_CFGDATA);
+		mtdcr(EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
+		mtdcr(EBC0_CFGDATA, pbcr);
+		/*            printf("PB0CR = %x\n", pbcr); */
 	      }
 
 	    size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
diff --git a/board/eric/init.S b/board/eric/init.S
index 4820dd0..16ab11e 100644
--- a/board/eric/init.S
+++ b/board/eric/init.S
@@ -76,129 +76,129 @@ ext_bus_cntlr_init:
 	/* Memory Bank 0 (Flash) initialization (from openbios) */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS0_AP@h
 	ori     r4,r4,CS0_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS0_CR@h
 	ori     r4,r4,CS0_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 1 (NVRAM/RTC) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb1ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS1_AP@h
 	ori     r4,r4,CS1_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb1cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS1_CR@h
 	ori     r4,r4,CS1_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 2 (A/D converter) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb2ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB2AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS2_AP@h
 	ori     r4,r4,CS2_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb2cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB2CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS2_CR@h
 	ori     r4,r4,CS2_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 3 (Ethernet PHY Reset) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb3ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB3AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS3_AP@h
 	ori     r4,r4,CS3_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb3cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB3CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS3_CR@h
 	ori     r4,r4,CS3_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb4ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB4AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS4_AP@h
 	ori     r4,r4,CS4_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb4cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB4CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS4_CR@h
 	ori     r4,r4,CS4_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb5ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB5AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS5_AP@h
 	ori     r4,r4,CS5_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb5cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB5CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS5_CR@h
 	ori     r4,r4,CS5_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 6 (CPU LED0) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb6ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB6AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS6_AP@h
 	ori     r4,r4,CS6_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb6cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB6CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS6_CR@h
 	ori     r4,r4,CS5_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	/*----------------------------------------------------------------------- */
 	/* Memory Bank 7 (CPU LED1) initialization */
 	/*----------------------------------------------------------------------- */
 
-	addi    r4,0,pb7ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB7AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS7_AP@h
 	ori     r4,r4,CS7_AP@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb7cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB7CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,CS7_CR@h
 	ori     r4,r4,CS7_CR@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 /*	addis   r4,r0,FPGA_BRDC@h */
 /*	ori     r4,r4,FPGA_BRDC@l */
@@ -229,40 +229,40 @@ sdram_init:
 	/*------------------------------------------------------------------- */
 
 	addi    r4,0,mem_mb0cf
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,MB0CF@h
 	ori     r4,r4,MB0CF@l
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*------------------------------------------------------------------- */
 	/* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
 	/*------------------------------------------------------------------- */
 
 	addi    r4,0,mem_mb1cf
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,MB1CF@h
 	ori     r4,r4,MB1CF@l
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*------------------------------------------------------------------- */
 	/* Set MB2CF for bank 2. off */
 	/*------------------------------------------------------------------- */
 
 	addi    r4,0,mem_mb2cf
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,MB2CF@h
 	ori     r4,r4,MB2CF@l
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*------------------------------------------------------------------- */
 	/* Set MB3CF for bank 3. off */
 	/*------------------------------------------------------------------- */
 
 	addi    r4,0,mem_mb3cf
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,MB3CF@h
 	ori     r4,r4,MB3CF@l
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*------------------------------------------------------------------- */
 	/* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
@@ -276,7 +276,7 @@ sdram_init:
 	/* maybe 133Mhz. */
 	/*------------------------------------------------------------------- */
 
-	mfdcr   r5,strap                 /* determine FBK divider */
+	mfdcr   r5,CPC0_PSR               /* determine FBK divider */
 					  /* via STRAP reg to calc PLB speed. */
 					  /* SDRAM speed is the same as the PLB */
 					  /* speed. */
@@ -306,15 +306,15 @@ sdram_init:
 	/* Set SDTR1 */
 	/*------------------------------------------------------------------- */
 	addi    r4,0,mem_sdtr1
-	mtdcr   memcfga,r4
-	mtdcr   memcfgd,r6
+	mtdcr   SDRAM0_CFGADDR,r4
+	mtdcr   SDRAM0_CFGDATA,r6
 
 	/*------------------------------------------------------------------- */
 	/* Set RTR */
 	/*------------------------------------------------------------------- */
 	addi    r4,0,mem_rtr
-	mtdcr   memcfga,r4
-	mtdcr   memcfgd,r7
+	mtdcr   SDRAM0_CFGADDR,r4
+	mtdcr   SDRAM0_CFGDATA,r7
 
 	/*------------------------------------------------------------------- */
 	/* Delay to ensure 200usec have elapsed since reset. Assume worst */
@@ -333,10 +333,10 @@ sdram_init:
 	/* read/prefetch. */
 	/*------------------------------------------------------------------- */
 	addi    r4,0,mem_mcopt1
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,0x8080             /* set DC_EN=1 */
 	ori     r4,r4,0x0000
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*------------------------------------------------------------------- */
 	/* Delay to ensure 10msec have elapsed since reset. This is */
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index 5a02155..46622a2 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -92,7 +92,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
 
 int board_revision(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
@@ -100,8 +100,8 @@ int board_revision(void)
 	 */
 
 	/* Setup GPIO pins (CS2/GPIO11, CS3/GPIO12 and CS4/GPIO13 as GPIO) */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03800000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03800000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x001c0000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x001c0000);
 
@@ -113,7 +113,7 @@ int board_revision(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x001c0000:
@@ -166,7 +166,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * New boards have a single 32MB flash connected to CS0
@@ -174,12 +174,12 @@ int board_early_init_f (void)
 	 */
 	if (board_revision() >= 8) {
 		/* disable CS1 */
-		mtebc(pb1ap, 0);
-		mtebc(pb1cr, 0);
+		mtebc(PB1AP, 0);
+		mtebc(PB1CR, 0);
 
 		/* resize CS0 to 32MB */
-		mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP_HWREV8);
-		mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR_HWREV8);
+		mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP_HWREV8);
+		mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR_HWREV8);
 	}
 
 	return 0;
@@ -209,7 +209,7 @@ int misc_init_r(void)
 	int status;
 	int index;
 	int i;
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	char *str;
 	uchar *logo_addr;
 	ulong logo_size;
@@ -219,8 +219,8 @@ int misc_init_r(void)
 	/*
 	 * Setup GPIO pins (CS6+CS7 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
@@ -265,7 +265,7 @@ int misc_init_r(void)
 	}
 
 	/* restore gpio/cs settings */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	puts("FPGA:  ");
 
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/ar405/flash.c
+++ b/board/esd/ar405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 074fe08..8da08fa 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -77,7 +77,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/ash405/flash.c b/board/esd/ash405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/ash405/flash.c
+++ b/board/esd/ash405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
index 2fe6b7b..418d3e2 100644
--- a/board/esd/canbt/canbt.c
+++ b/board/esd/canbt/canbt.c
@@ -52,16 +52,16 @@ const unsigned char fpgadata[] = {
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	int index, len, i;
 	int status;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff;
-	cntrl0Reg |= 0x0070f000;
-	mtdcr (cntrl0, cntrl0Reg);
+	CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff;
+	CPC0_CR0Reg |= 0x0070f000;
+	mtdcr (CPC0_CR0, CPC0_CR0Reg);
 
 #ifdef FPGA_DEBUG
 	/* set up serial port with default baudrate */
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/canbt/flash.c
+++ b/board/esd/canbt/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 01b1223..7a92401 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -56,7 +56,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/cms700/flash.c
+++ b/board/esd/cms700/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index cd57ed4..00c7024 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -31,13 +31,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * Setup GPIO pins
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg |
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg |
 	      ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED |
 		CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
@@ -72,7 +72,7 @@ int board_early_init_f (void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -81,8 +81,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return (0);
 }
diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/cpci2dp/flash.c
+++ b/board/esd/cpci2dp/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index a677c62..4c9ed2f 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -214,7 +214,7 @@ int ctermm2(void)
 
 int cpci405_host(void)
 {
-	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
 		return -1;		/* yes, board is cpci405 host */
 	else
 		return 0;		/* no, board is cpci405 adapter */
@@ -222,14 +222,14 @@ int cpci405_host(void)
 
 int cpci405_version(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
 	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
 	udelay(1000); /* wait some time before reading input */
@@ -238,7 +238,7 @@ int cpci405_version(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x00180000:
@@ -261,7 +261,7 @@ int cpci405_version(void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -283,8 +283,8 @@ int misc_init_r (void)
 		/*
 		 * Setup GPIO pins (CS6+CS7 as GPIO)
 		 */
-		cntrl0Reg = mfdcr(cntrl0);
-		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+		CPC0_CR0Reg = mfdcr(CPC0_CR0);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 		if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
@@ -330,7 +330,7 @@ int misc_init_r (void)
 		}
 
 		/* restore gpio/cs settings */
-		mtdcr(cntrl0, cntrl0Reg);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 		puts("FPGA:  ");
 
@@ -400,8 +400,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return 0;
 }
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index d535924..4fcf174 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -91,13 +91,13 @@ unsigned long flash_init (void)
 			size_b1 = 1 << 20;
 		}
 		base_b1 = -size_b1;
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (calc_size(size_b1) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b1=%x base_b1=%x pb1cr = %x\n",
+		printf("size_b1=%x base_b1=%x PB1CR = %x\n",
 		       size_b1, base_b1, pbcr); /* test-only */
 #endif
 	}
@@ -108,13 +108,13 @@ unsigned long flash_init (void)
 			size_b0 = 1 << 20;
 		}
 		base_b0 = base_b1 - size_b0;
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (calc_size(size_b0) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b0=%x base_b0=%x pb0cr = %x\n",
+		printf("size_b0=%x base_b0=%x PB0CR = %x\n",
 		       size_b0, base_b0, pbcr); /* test-only */
 #endif
 	}
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
index 56c822e..224dde4 100644
--- a/board/esd/cpciiser4/flash.c
+++ b/board/esd/cpciiser4/flash.c
@@ -64,13 +64,13 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	mtdcr(ebccfgd, pbcr);
-	/*          printf("pb1cr = %x\n", pbcr); */
+	mtdcr(EBC0_CFGDATA, pbcr);
+	/*          printf("PB1CR = %x\n", pbcr); */
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index e52d37b..fc0d091 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -54,7 +54,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO13 (CS4) pin
diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 8e9ac28..28a50c7 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -135,7 +135,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 100 us
 	 */
-	mtebc (epcr, 0xb8400000);
+	mtebc (EBC0_CFG, 0xb8400000);
 
 	return 0;
 }
@@ -143,13 +143,13 @@ int board_early_init_f (void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * Setup UART1 handshaking: use CTS instead of DSR
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return (0);
 }
diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c
index 240aa09..c62c6a9 100644
--- a/board/esd/du405/flash.c
+++ b/board/esd/du405/flash.c
@@ -67,25 +67,25 @@ unsigned long flash_init (void)
 	/* Re-do sizing to get full correct info */
 
 	if (size_b1) {
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		pbcr = (pbcr & 0x0001ffff) | base_b1 |
 				(((size_b1 / 1024 / 1024) - 1) << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*          printf("PB1CR = %x\n", pbcr); */
 	}
 
 	if (size_b0) {
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		pbcr = (pbcr & 0x0001ffff) | base_b0 |
 				(((size_b0 / 1024 / 1024) - 1) << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*            printf("PB0CR = %x\n", pbcr); */
 	}
 
 	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 0ec519b..376de98 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -45,8 +45,8 @@ int board_early_init_f(void)
 	u32 sdr0_pfc1, sdr0_pfc2;
 	u32 reg;
 
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xb8400000);
 
 	/*
 	 * Setup the GPIO pins
@@ -145,8 +145,8 @@ int board_early_init_f(void)
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
 	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);
 
 	/* setup NAND FLASH */
 	mfsdr(SDR0_CUST0, sdr0_cust0);
@@ -176,12 +176,12 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -265,8 +265,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 	/*
 	 * release IO-RST#
@@ -380,35 +380,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
diff --git a/board/esd/hh405/flash.c b/board/esd/hh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/hh405/flash.c
+++ b/board/esd/hh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 5ae4c75..b72b716 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -374,7 +374,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 03e5ad7..acb23da 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -97,7 +97,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
index e763a89..eda7c57 100644
--- a/board/esd/ocrtc/flash.c
+++ b/board/esd/ocrtc/flash.c
@@ -68,9 +68,9 @@ unsigned long flash_init (void)
 	/* Re-do sizing to get full correct info */
 
 	if (size_b1) {
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		switch (size_b1) {
 		case 1 << 20:
@@ -90,14 +90,14 @@ unsigned long flash_init (void)
 			break;
 		}
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*          printf("PB1CR = %x\n", pbcr); */
 	}
 
 	if (size_b0) {
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		switch (size_b1) {
 		case 1 << 20:
@@ -117,8 +117,8 @@ unsigned long flash_init (void)
 			break;
 		}
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-		mtdcr (ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
+		mtdcr (EBC0_CFGDATA, pbcr);
+		/*            printf("PB0CR = %x\n", pbcr); */
 	}
 
 	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
index 35bfa95..709bcdd 100644
--- a/board/esd/ocrtc/ocrtc.c
+++ b/board/esd/ocrtc/ocrtc.c
@@ -57,7 +57,7 @@ int board_early_init_f (void)
 	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
 	 * transfers, set device-paced timeout to 256 cycles
 	 */
-	mtebc (epcr, 0x20400000);
+	mtebc (EBC0_CFG, 0x20400000);
 
 	return 0;
 }
diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c
index 9058483..67a7bb5 100644
--- a/board/esd/pci405/flash.c
+++ b/board/esd/pci405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 56184ca..04bc569 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -67,7 +67,7 @@ const unsigned char fpgadata[] =
 
 int board_revision(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
@@ -77,8 +77,8 @@ int board_revision(void)
 	/*
 	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
 	udelay(1000);                   /* wait some time before reading input */
@@ -87,7 +87,7 @@ int board_revision(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x00100200:
@@ -133,7 +133,7 @@ unsigned long fpga_init_state(void)
 
 int board_early_init_f (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
@@ -166,18 +166,18 @@ int board_early_init_f (void)
 	/*
 	 * Setup GPIO pins (IRQ4/GPIO21 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00008000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00008000);
 
 	/*
 	 * Setup GPIO pins (CS6+CS7 as GPIO)
 	 */
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 25 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
@@ -282,11 +282,11 @@ int misc_init_r (void)
 #define PCI0_BRDGOPT1 0x4a
 	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
 
-#define plb0_acr      0x87
+#define PLB0_ACR      0x87
 	/*
 	 * Enable fairness and high bus utilization
 	 */
-	mtdcr(plb0_acr, 0x98000000);
+	mtdcr(PLB0_ACR, 0x98000000);
 
 	free(dst);
 	return (0);
@@ -313,14 +313,14 @@ int checkboard (void)
 	printf(" (Rev 1.%ld", gd->board_type);
 
 	if (gd->board_type >= 2) {
-		unsigned long cntrl0Reg;
+		unsigned long CPC0_CR0Reg;
 		unsigned long value;
 
 		/*
 		 * Setup GPIO pins (Trace/GPIO1 to GPIO)
 		 */
-		cntrl0Reg = mfdcr(cntrl0);
-		mtdcr(cntrl0, cntrl0Reg & ~0x08000000);
+		CPC0_CR0Reg = mfdcr(CPC0_CR0);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg & ~0x08000000);
 		out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
 		out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
 		udelay(1000);                   /* wait some time before reading input */
diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index e41545a..a3c1cec 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -90,7 +90,7 @@ int board_early_init_f(void)
 	 * EBC Configuration Register: set ready timeout to
 	 * 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000); /* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index 192a642..5ff87e7 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -60,12 +60,12 @@ int board_early_init_f (void)
 	 * EBC Configuration Register:
 	 * set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000);
+	mtebc (EBC0_CFG, 0xa8400000);
 
 	/*
 	 * Setup GPIO pins
 	 */
-	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT |
+	mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT |
 					CONFIG_SYS_FPGA_DONE |
 					CONFIG_SYS_XEREADY |
 					CONFIG_SYS_NONMONARCH |
@@ -73,7 +73,7 @@ int board_early_init_f (void)
 
 	if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
 		/* rev 1.2 boards */
-		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE |
+		mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE |
 						CONFIG_SYS_SELF_RST) << 5));
 	}
 
diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c
index f68e1b5..419311a 100644
--- a/board/esd/pmc405de/pmc405de.c
+++ b/board/esd/pmc405de/pmc405de.c
@@ -127,7 +127,7 @@ int board_early_init_f(void)
 	 * - set ready timeout to 512 ebc-clks -> ca. 15 us
 	 * - EBC lines are always driven
 	 */
-	mtebc(epcr, 0xa8400000);
+	mtebc(EBC0_CFG, 0xa8400000);
 
 	return 0;
 }
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index f22a1c2..119cbf2 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -64,7 +64,7 @@ struct serial_device *default_serial_console(void)
 	 * Use default console on P4 when strapping jumper
 	 * is installed (bootstrap option != 'H').
 	 */
-	mfsdr(SDR_PINSTP, val);
+	mfsdr(SDR0_PINSTP, val);
 	if (((val & 0xf0000000) >> 29) != 7)
 		return &serial1_device;
 
@@ -100,8 +100,8 @@ int board_early_init_f(void)
 	u32 reg;
 
 	/* general EBC configuration (disable EBC timeouts) */
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xf8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xf8400000);
 
 	/*
 	 * Setup the GPIO pins
@@ -134,13 +134,13 @@ int board_early_init_f(void)
 	out_be32((void *)GPIO1_ISR3H, 0x00000000);
 
 	/* patch PLB:PCI divider for 66MHz PCI */
-	mfcpr(clk_spcid, reg);
+	mfcpr(CPR0_SPCID, reg);
 	if (pci_is_66mhz() && (reg != 0x02000000)) {
-		mtcpr(clk_spcid, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
+		mtcpr(CPR0_SPCID, 0x02000000); /* 133MHZ : 2 for 66MHz PCI */
 
-		mfcpr(clk_icfg, reg);
+		mfcpr(CPR0_ICFG, reg);
 		reg |= CPR0_ICFG_RLI_MASK;
-		mtcpr(clk_icfg, reg);
+		mtcpr(CPR0_ICFG, reg);
 
 		mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */
 	}
@@ -240,19 +240,19 @@ int misc_init_r(void)
 	gd->bd->bi_flashoffset = 0;
 
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb2cr);
+	mtdcr(EBC0_CFGADDR, PB2CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	pbcr = mfdcr(ebccfgd);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtdcr(ebccfga, pb2cr);
+	mtdcr(EBC0_CFGADDR, PB2CR);
 #else
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 #endif
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -424,8 +424,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 #ifdef CONFIG_FPGA
 	pmc440_init_fpga();
@@ -507,35 +507,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 #ifdef CONFIG_PCI_PNP
 	hose->fixup_irq = pmc440_pci_fixup_irq;
diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 9127550..7477f56 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -99,7 +99,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/vom405/flash.c
+++ b/board/esd/vom405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
index a481aca..de9c7b9 100644
--- a/board/esd/vom405/vom405.c
+++ b/board/esd/vom405/vom405.c
@@ -56,7 +56,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
diff --git a/board/esd/wuh405/flash.c b/board/esd/wuh405/flash.c
index 274ada9..a53122b 100644
--- a/board/esd/wuh405/flash.c
+++ b/board/esd/wuh405/flash.c
@@ -65,9 +65,9 @@ unsigned long flash_init (void)
 	flash_get_offsets (-size_b0, &flash_info[0]);
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGADDR, PB0CR);
 	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
@@ -87,7 +87,7 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c
index e330fff..e86f1d0 100644
--- a/board/esd/wuh405/wuh405.c
+++ b/board/esd/wuh405/wuh405.c
@@ -75,7 +75,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
diff --git a/board/exbitgen/exbitgen.c b/board/exbitgen/exbitgen.c
index dc07d3d..0f84127 100644
--- a/board/exbitgen/exbitgen.c
+++ b/board/exbitgen/exbitgen.c
@@ -94,29 +94,29 @@ phys_size_t initdram (int board_type)
 
 	tot_size = 0;
 
-	mtdcr (memcfga, mem_mb0cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb1cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb2cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
 	}
 
-	mtdcr (memcfga, mem_mb3cf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 	if (tmp & 0x00000001) {
 		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
 		tot_size += bank_size;
diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S
index cb54874..c2dae56 100644
--- a/board/exbitgen/init.S
+++ b/board/exbitgen/init.S
@@ -109,10 +109,10 @@
 
 
 #define WDCR_EBC(reg,val) addi    r4,0,reg;\
-	mtdcr   ebccfga,r4;\
+	mtdcr   EBC0_CFGADDR,r4;\
 	addis   r4,0,val@h;\
 	ori     r4,r4,val@l;\
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 /*---------------------------------------------------------------------
  * Function:     ext_bus_cntlr_init
@@ -164,22 +164,22 @@ ext_bus_cntlr_init:
 	 * Memory Bank 0 (Boot Flash) initialization
 	 *---------------------------------------------------------------
 	 */
-	WDCR_EBC(pb0ap, FLASH_32bit_AP)
-	WDCR_EBC(pb0cr, 0xffe38000)
-/*pnc	WDCR_EBC(pb0cr, FLASH_32bit_CR) */
+	WDCR_EBC(PB1AP, FLASH_32bit_AP)
+	WDCR_EBC(PB0CR, 0xffe38000)
+/*pnc	WDCR_EBC(PB0CR, FLASH_32bit_CR) */
 
 	/*---------------------------------------------------------------
 	 * Memory Bank 5 (CPLD) initialization
 	 *---------------------------------------------------------------
 	 */
-	WDCR_EBC(pb5ap, 0x01010040)
-/*jsa recommendation:		WDCR_EBC(pb5ap, 0x00010040) */
-	WDCR_EBC(pb5cr, 0x10038000)
+	WDCR_EBC(PB5AP, 0x01010040)
+/*jsa recommendation:		WDCR_EBC(PB5AP, 0x00010040) */
+	WDCR_EBC(PB5CR, 0x10038000)
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 6 (not used) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb6cr, 0x00000000)
+	WDCR_EBC(PB6CR, 0x00000000)
 
 	/* Read HW ID to determine whether old H2 board or new generic CPU board */
 	addis	r3, 0,  HW_ID_ADDR@h
@@ -196,24 +196,24 @@ setup_genieboard:
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 1 (Application Flash) initialization for generic CPU board */
 	/*--------------------------------------------------------------- */
-/*	WDCR_EBC(pb1ap, 0x7b015480)	/###* T.B.M. */
-/*	WDCR_EBC(pb1ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb1ap, 0x9b015480)	/* hlb-20020207: burst 8 bit 6 cycles  */
+/*	WDCR_EBC(PB1AP, 0x7b015480)	/###* T.B.M. */
+/*	WDCR_EBC(PB1AP, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(PB1AP, 0x9b015480)	/* hlb-20020207: burst 8 bit 6 cycles  */
 
-/*	WDCR_EBC(pb1cr, 0x20098000)	/###* 16 MB */
-	WDCR_EBC(pb1cr, 0x200B8000)	/* 32 MB */
+/*	WDCR_EBC(PB1CR, 0x20098000)	/###* 16 MB */
+	WDCR_EBC(PB1CR, 0x200B8000)	/* 32 MB */
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb4ap, 0x01010000)	/*  */
-	WDCR_EBC(pb4cr, 0x1021c000)	/*  */
+	WDCR_EBC(PB4AP, 0x01010000)	/*  */
+	WDCR_EBC(PB4CR, 0x1021c000)	/*  */
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 7 (Heathrow chip on Reference board) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb7ap, 0x200ffe80)	/* No Ready, many wait states (let reflections die out) */
-	WDCR_EBC(pb7cr, 0X4001A000)
+	WDCR_EBC(PB7AP, 0x200ffe80)	/* No Ready, many wait states (let reflections die out) */
+	WDCR_EBC(PB7CR, 0X4001A000)
 
 	bl	setup_continue
 
@@ -222,36 +222,36 @@ setup_h2evalboard:
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 1 (Application Flash) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb1ap, 0x7b015480)	/* T.B.M. */
-/*3010	WDCR_EBC(pb1ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb1cr, 0x20058000)
+	WDCR_EBC(PB1AP, 0x7b015480)	/* T.B.M. */
+/*3010	WDCR_EBC(PB1AP, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(PB1CR, 0x20058000)
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 2 (Application Flash) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb2ap, 0x7b015480)	/* T.B.M. */
-/*3010	WDCR_EBC(pb2ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb2cr, 0x20458000)
+	WDCR_EBC(PB2AP, 0x7b015480)	/* T.B.M. */
+/*3010	WDCR_EBC(PB2AP, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(PB2CR, 0x20458000)
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 3 (Application Flash) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb3ap, 0x7b015480)	/* T.B.M. */
-/*3010	WDCR_EBC(pb3ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb3cr, 0x20858000)
+	WDCR_EBC(PB3AP, 0x7b015480)	/* T.B.M. */
+/*3010	WDCR_EBC(PB3AP, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(PB3CR, 0x20858000)
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 4 (Application Flash) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb4ap, 0x7b015480)	/* T.B.M. */
-/*3010	WDCR_EBC(pb4ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb4cr, 0x20C58000)
+	WDCR_EBC(PB4AP, 0x7b015480)	/* T.B.M. */
+/*3010	WDCR_EBC(PB4AP, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(PB4CR, 0x20C58000)
 
 	/*--------------------------------------------------------------- */
 	/* Memory Bank 7 (Heathrow chip) initialization */
 	/*--------------------------------------------------------------- */
-	WDCR_EBC(pb7ap, 0x02000280)	/* No Ready, 4 wait states */
-	WDCR_EBC(pb7cr, 0X4001A000)
+	WDCR_EBC(PB7AP, 0x02000280)	/* No Ready, 4 wait states */
+	WDCR_EBC(PB7CR, 0X4001A000)
 
 setup_continue:
 
@@ -294,7 +294,7 @@ sdram_init:
 	/* Read  PLL feedback divider and calculate clock period of local bus in */
 	/* granularity of 10 ps. Save clock period in r30 */
 	/*-------------------------------------------------------------- */
-	mfdcr	r4, pllmd
+	mfdcr	r4, CPC0_PLLMR
 	addi	r9, 0, 25
 	srw	r4, r4, r9
 	andi.	r4, r4, 0x07
@@ -383,8 +383,8 @@ sdram_init:
 	/* Set SDTR1  */
 	/*----------------------------------------------------------- */
 	addi    r5,0,mem_sdtr1
-	mtdcr   memcfga,r5
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGADDR,r5
+	mtdcr   SDRAM0_CFGDATA,r4
 
 	/*----------------------------------------------------------- */
 	/* */
@@ -414,8 +414,8 @@ sdram_init:
 	/* Set SDRAM bank 0 register and adjust r6 for next bank */
 	/*------------------------------------------------------ */
 	addi    r7,0,mem_mb0cf
-	mtdcr   memcfga,r7
-	mtdcr   memcfgd,r6
+	mtdcr   SDRAM0_CFGADDR,r7
+	mtdcr   SDRAM0_CFGDATA,r6
 
 	add	r6, r6, r15	/* add bank size to base address for next bank */
 
@@ -425,16 +425,16 @@ sdram_init:
 	bne	b1skip
 
 	addi    r7,0,mem_mb1cf
-	mtdcr   memcfga,r7
-	mtdcr   memcfgd,r6
+	mtdcr   SDRAM0_CFGADDR,r7
+	mtdcr   SDRAM0_CFGDATA,r6
 
 	add	r6, r6, r15	/* add bank size to base address for next bank */
 
 	/* Set SDRAM bank 2 register and adjust r6 for next bank */
 	/*------------------------------------------------------ */
 b1skip:	addi    r7,0,mem_mb2cf
-	mtdcr   memcfga,r7
-	mtdcr   memcfgd,r6
+	mtdcr   SDRAM0_CFGADDR,r7
+	mtdcr   SDRAM0_CFGDATA,r6
 
 	add	r6, r6, r15	/* add bank size to base address for next bank */
 
@@ -444,8 +444,8 @@ b1skip:	addi    r7,0,mem_mb2cf
 	bne	b3skip
 
 	addi    r7,0,mem_mb3cf
-	mtdcr   memcfga,r7
-	mtdcr   memcfgd,r6
+	mtdcr   SDRAM0_CFGADDR,r7
+	mtdcr   SDRAM0_CFGDATA,r6
 b3skip:
 
 	/*----------------------------------------------------------- */
@@ -457,8 +457,8 @@ b3skip:
 	bl	rtr_2
 rtr_1:	addis	r7, 0, 0x03F8
 rtr_2:	addi    r4,0,mem_rtr
-	mtdcr   memcfga,r4
-	mtdcr   memcfgd,r7
+	mtdcr   SDRAM0_CFGADDR,r4
+	mtdcr   SDRAM0_CFGDATA,r7
 
 	/*----------------------------------------------------------- */
 	/* Delay to ensure 200usec have elapsed since reset. Assume worst */
@@ -477,10 +477,10 @@ rtr_2:	addi    r4,0,mem_rtr
 	/* read/prefetch. */
 	/*----------------------------------------------------------- */
 	addi    r4,0,mem_mcopt1
-	mtdcr   memcfga,r4
+	mtdcr   SDRAM0_CFGADDR,r4
 	addis   r4,0,0x80C0             /* set DC_EN=1 */
 	ori     r4,r4,0x0000
-	mtdcr   memcfgd,r4
+	mtdcr   SDRAM0_CFGDATA,r4
 
 
 	/*----------------------------------------------------------- */
@@ -980,9 +980,9 @@ fc07:
 
 /* For CPLD */
 /* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */
-/*	WDCR_EBC(pb5ap, 0x01010040) */
-/*jsa recommendation:		WDCR_EBC(pb5ap, 0x00010040) */
-/*	WDCR_EBC(pb5cr, 0X10018000) */
+/*	WDCR_EBC(PB5AP, 0x01010040) */
+/*jsa recommendation:		WDCR_EBC(PB5AP, 0x00010040) */
+/*	WDCR_EBC(PB5CR, 0X10018000) */
 /* Access parms */
 /*   100   3      8          0    0    0 */
 /* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */
@@ -1003,9 +1003,9 @@ fc07:
 /* Usage:	read/write */
 /* Width:	32 bit */
 
-/* Walnut fpga pb7ap */
+/* Walnut fpga PB7AP */
 /* 0      1      8         1         5         2         8            0 */
 /* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */
-/* Walnut fpga pb7cr */
+/* Walnut fpga PB7CR */
 /* 0xF0318000 */
 /*  */
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index f6f4719..ae258e1 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -58,7 +58,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 #endif
 
 	return 0;
@@ -114,7 +114,7 @@ int checkboard (void)
 
 long int init_sdram_static_settings(void)
 {
-#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+#define mtsdram0(reg, data)  mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data)
 	/* disable memcontroller so updates work */
 	mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL );
 	mtsdram0( mem_rtr   , MEM_RTR_INIT_VAL   );
@@ -154,15 +154,15 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	ulong ap, cr;
 
 	printf("\nEBC registers for PPC405GP:\n");
-	mfebc(pb0ap, ap); mfebc(pb0cr, cr);
+	mfebc(PB0AP, ap); mfebc(PB0CR, cr);
 	printf("0: AP=%08lx CP=%08lx\n", ap, cr);
-	mfebc(pb1ap, ap); mfebc(pb1cr, cr);
+	mfebc(PB1AP, ap); mfebc(PB1CR, cr);
 	printf("1: AP=%08lx CP=%08lx\n", ap, cr);
-	mfebc(pb2ap, ap); mfebc(pb2cr, cr);
+	mfebc(PB2AP, ap); mfebc(PB2CR, cr);
 	printf("2: AP=%08lx CP=%08lx\n", ap, cr);
-	mfebc(pb3ap, ap); mfebc(pb3cr, cr);
+	mfebc(PB3AP, ap); mfebc(PB3CR, cr);
 	printf("3: AP=%08lx CP=%08lx\n", ap, cr);
-	mfebc(pb4ap, ap); mfebc(pb4cr, cr);
+	mfebc(PB4AP, ap); mfebc(PB4CR, cr);
 	printf("4: AP=%08lx CP=%08lx\n", ap, cr);
 	printf("\n");
 
diff --git a/board/gdsys/compactcenter/compactcenter.c b/board/gdsys/compactcenter/compactcenter.c
index f448ef9..8a5ea30 100644
--- a/board/gdsys/compactcenter/compactcenter.c
+++ b/board/gdsys/compactcenter/compactcenter.c
@@ -215,7 +215,7 @@ int board_early_init_r(void)
 		EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
 
 	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
-	mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L
+	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
 		| bxcr_bw
 		| EBC_BXCR_BU_RW
 		| EBC_BXCR_BW_16BIT);
diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c
index 4ec1cdb..5246bc8 100644
--- a/board/gdsys/dlvision/dlvision.c
+++ b/board/gdsys/dlvision/dlvision.c
@@ -48,7 +48,7 @@ int board_early_init_f(void)
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
 	 * -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000);	/* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
 
 	/*
 	 * setup io-latches
diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c
index a661057..27c159b 100644
--- a/board/gdsys/gdppc440etx/gdppc440etx.c
+++ b/board/gdsys/gdppc440etx/gdppc440etx.c
@@ -42,8 +42,8 @@ int board_early_init_f(void)
 	/*
 	 * Setup the external bus controller/chip selects
 	 */
-	mfebc(xbcfg, reg);
-	mtebc(xbcfg, reg | 0x04000000);		/* Set ATC */
+	mfebc(EBC0_CFG, reg);
+	mtebc(EBC0_CFG, reg | 0x04000000);		/* Set ATC */
 
 	/*
 	 * Setup the GPIO pins
@@ -102,10 +102,10 @@ int board_early_init_f(void)
 	/*
 	 * Setup other serial configuration
 	 */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(SDR0_PFC0, 0x00003e00);	/* Pin function */
+	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins */
 
 	return 0;
 }
@@ -117,7 +117,7 @@ int misc_init_r(void)
 	uint sz;
 
 	/* Re-do sizing to get full correct info */
-	mfebc(pb0cr, pbcr);
+	mfebc(PB0CR, pbcr);
 
 	if (gd->bd->bi_flashsize > 0x08000000)
 		panic("Max. flash banksize is 128 MB!\n");
@@ -127,7 +127,7 @@ int misc_init_r(void)
 		sz <<= 1;
 
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtebc(pb0cr, pbcr);
+	mtebc(PB0CR, pbcr);
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -178,35 +178,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	/* enable 66 MHz ext. Clock */
 	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000);
diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c
index 817ce17..628ce3d 100644
--- a/board/gdsys/neo/neo.c
+++ b/board/gdsys/neo/neo.c
@@ -43,7 +43,7 @@ int board_early_init_f(void)
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
 	 * -> ca. 15 us
 	 */
-	mtebc(epcr, 0xa8400000);	/* ebc always driven */
+	mtebc(EBC0_CFG, 0xa8400000);	/* ebc always driven */
 
 	return 0;
 }
diff --git a/board/jse/init.S b/board/jse/init.S
index 7b932b2..92f43f4 100644
--- a/board/jse/init.S
+++ b/board/jse/init.S
@@ -52,8 +52,6 @@
 #include <asm/cache.h>
 #include <asm/mmu.h>
 
-#define cpc0_cr0 0xB1
-
 	.globl	ext_bus_cntlr_init
 ext_bus_cntlr_init:
 	mflr    r4                      /* save link register */
@@ -84,16 +82,16 @@ ext_bus_cntlr_init:
 	/* Memory Bank 0 (Flash) initialization */
 	/*----------------------------------------------------------------- */
 
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0x9B01
 	ori     r4,r4,0x5480
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,0xFFF1           /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
 	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 	blr
diff --git a/board/jse/jse.c b/board/jse/jse.c
index 6a6b9dd..6dc9a01 100644
--- a/board/jse/jse.c
+++ b/board/jse/jse.c
@@ -62,12 +62,12 @@ int board_early_init_f (void)
 
 	/* EBC0_B1AP: BME=1, TWT=2, CSN=0, OEN=1,
 	   WBN=0, WBF=1, TH=0,  RE=0,  SOR=0, BEM=0, PEN=0 */
-	mtdcr (ebccfga, pb1ap);
-	mtdcr (ebccfgd, 0x01011000);
+	mtdcr (EBC0_CFGADDR, PB1AP);
+	mtdcr (EBC0_CFGDATA, 0x01011000);
 
 	/* EBC0_B1CR: BAS=x, BS=0(1MB), BU=3(R/W), BW=0(8bits) */
-	mtdcr (ebccfga, pb1cr);
-	mtdcr (ebccfgd, CONFIG_SYS_SYSTEMACE_BASE | 0x00018000);
+	mtdcr (EBC0_CFGADDR, PB1CR);
+	mtdcr (EBC0_CFGDATA, CONFIG_SYS_SYSTEMACE_BASE | 0x00018000);
 
 	/* Enable the /PerWE output as /PerWE, instead of /PCIINT. */
 	/* CPC0_CR1 |= PCIPW */
diff --git a/board/jse/sdram.c b/board/jse/sdram.c
index a1f526d..bb6f85e 100644
--- a/board/jse/sdram.c
+++ b/board/jse/sdram.c
@@ -35,60 +35,60 @@ phys_size_t initdram (int board_type)
 	/* Configure the SDRAMS */
 
 	/* disable memory controller */
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, 0x00000000);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	mtdcr (SDRAM0_CFGDATA, 0x00000000);
 
 	udelay (500);
 
 	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
-	mtdcr (memcfga, mem_besra);
-	mtdcr (memcfgd, 0xffffffff);
+	mtdcr (SDRAM0_CFGADDR, mem_besra);
+	mtdcr (SDRAM0_CFGDATA, 0xffffffff);
 
 	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
-	mtdcr (memcfga, mem_besrb);
-	mtdcr (memcfgd, 0xffffffff);
+	mtdcr (SDRAM0_CFGADDR, mem_besrb);
+	mtdcr (SDRAM0_CFGDATA, 0xffffffff);
 
 	/* Clear SDRAM0_ECCCFG (disable ECC) */
-	mtdcr (memcfga, mem_ecccf);
-	mtdcr (memcfgd, 0x00000000);
+	mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+	mtdcr (SDRAM0_CFGDATA, 0x00000000);
 
 	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
-	mtdcr (memcfga, mem_eccerr);
-	mtdcr (memcfgd, 0xffffffff);
+	mtdcr (SDRAM0_CFGADDR, mem_eccerr);
+	mtdcr (SDRAM0_CFGDATA, 0xffffffff);
 
 	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, 0x010a4016);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	mtdcr (SDRAM0_CFGDATA, 0x010a4016);
 
 	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, 0x00084001);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	mtdcr (SDRAM0_CFGDATA, 0x00084001);
 
 	/* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */
-	mtdcr (memcfga, mem_mb1cf);
-	mtdcr (memcfgd, 0x04084001);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	mtdcr (SDRAM0_CFGDATA, 0x04084001);
 
 	/* Memory Bank 2 Config ==  BE=0 */
-	mtdcr (memcfga, mem_mb2cf);
-	mtdcr (memcfgd, 0x00000000);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	mtdcr (SDRAM0_CFGDATA, 0x00000000);
 
 	/* Memory Bank 3 Config ==  BE=0 */
-	mtdcr (memcfga, mem_mb3cf);
-	mtdcr (memcfgd, 0x00000000);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	mtdcr (SDRAM0_CFGDATA, 0x00000000);
 
 	/* refresh timer = 0x400  */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, 0x04000000);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	mtdcr (SDRAM0_CFGDATA, 0x04000000);
 
 	/* Power management idle timer set to the default. */
-	mtdcr (memcfga, mem_pmit);
-	mtdcr (memcfgd, 0x07c00000);
+	mtdcr (SDRAM0_CFGADDR, mem_pmit);
+	mtdcr (SDRAM0_CFGDATA, 0x07c00000);
 
 	udelay (500);
 
 	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, 0x80e00000);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	mtdcr (SDRAM0_CFGDATA, 0x80e00000);
 
 	return SDRAM_LEN;
 }
@@ -108,28 +108,28 @@ int testdram (void)
 #ifdef DEBUG
 	printf ("SDRAM Controller Registers --\n");
 
-	mtdcr (memcfga, mem_mcopt1);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_CFG   : 0x%08x\n", val);
 
-	mtdcr (memcfga, 0x24);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, 0x24);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_STATUS: 0x%08x\n", val);
 
-	mtdcr (memcfga, mem_mb0cf);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_B0CR  : 0x%08x\n", val);
 
-	mtdcr (memcfga, mem_mb1cf);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_B1CR  : 0x%08x\n", val);
 
-	mtdcr (memcfga, mem_sdtr1);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_TR    : 0x%08x\n", val);
 
-	mtdcr (memcfga, mem_rtr);
-	val = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	val = mfdcr (SDRAM0_CFGDATA);
 	printf ("    SDRAM0_RTR   : 0x%08x\n", val);
 #endif
 
@@ -137,8 +137,8 @@ int testdram (void)
 	   bit. Really, there should already have been plenty of time,
 	   given it was started long ago. But, best to check. */
 	for (idx = 0; idx < 1000000; idx += 1) {
-		mtdcr (memcfga, 0x24);
-		val = mfdcr (memcfgd);
+		mtdcr (SDRAM0_CFGADDR, 0x24);
+		val = mfdcr (SDRAM0_CFGDATA);
 		if (val & 0x80000000)
 			break;
 	}
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 8328ba3..3d4d149 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -81,8 +81,8 @@ int board_early_init_f(void)
 	korat_buzzer(0);
 #endif
 
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xb8400000);
 
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -157,8 +157,8 @@ int board_early_init_f(void)
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 
 	/* PCI arbiter enabled */
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);
 
 	return 0;
 }
@@ -359,12 +359,12 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size;
 	gd->bd->bi_flashoffset = 0;
 
-	mtdcr(ebccfga, pb1cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB1CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(flash1_size) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb1cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB1CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -378,12 +378,12 @@ int misc_init_r(void)
 	gd->bd->bi_flashoffset =
 		CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR;
 
-	mtdcr(ebccfga, pb1cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB1CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb1cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB1CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* Monitor protection ON by default */
 #if defined(CONFIG_KORAT_PERMANENT)
@@ -552,8 +552,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 	set_serial_number();
 	set_mac_addresses();
@@ -620,35 +620,35 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 #if defined(CONFIG_PCI_PNP)
 	hose->fixup_irq = korat_pci_fixup_irq;
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 9b76e76..a9c2a6f 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -38,8 +38,8 @@ int board_early_init_f(void)
 	u32 reg;
 
 	/* PLB Write pipelining disabled. Denali Core workaround */
-	mtdcr(plb0_acr, 0xDE000000);
-	mtdcr(plb1_acr, 0xDE000000);
+	mtdcr(PLB0_ACR, 0xDE000000);
+	mtdcr(PLB1_ACR, 0xDE000000);
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -90,9 +90,9 @@ int board_early_init_f(void)
 
 	/* PCI arbiter disabled */
 	/* PCI Host Configuration disbaled */
-	mfsdr(sdr_pci0, reg);
+	mfsdr(SDR0_PCI0, reg);
 	reg = 0;
-	mtsdr(sdr_pci0, 0x00000000 | reg);
+	mtsdr(SDR0_PCI0, 0x00000000 | reg);
 
 	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
 
@@ -157,7 +157,7 @@ int misc_init_r(void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	mfebc(pb0cr, pbcr);
+	mfebc(PB0CR, pbcr);
 	switch (gd->bd->bi_flashsize) {
 	case 1 << 20:
 		size_val = 0;
@@ -185,7 +185,7 @@ int misc_init_r(void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtebc(pb0cr, pbcr);
+	mtebc(PB0CR, pbcr);
 
 	/*
 	 * Re-check to get correct base address
@@ -249,8 +249,8 @@ int misc_init_r(void)
 	 * This fix will make the MAL burst disabling patch for the Linux
 	 * EMAC driver obsolete.
 	 */
-	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
-	mtdcr(plb4_acr, reg);
+	reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP;
+	mtdcr(PLB4_ACR, reg);
 
 	/*
 	 * Init matrix keyboard
@@ -296,35 +296,35 @@ int pci_pre_init(struct pci_controller *hose)
 	  | Set priority for all PLB3 devices to 0.
 	  | Set PLB3 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*-------------------------------------------------------------------------+
 	  | Set priority for all PLB4 devices to 0.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*-------------------------------------------------------------------------+
 	  | Set Nebula PLB4 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 355608c..682f0e7 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -97,7 +97,7 @@ int get_boot_mode(void)
 {
 	unsigned long pbcr;
 	int res = 0;
-	pbcr = mfdcr (strap);
+	pbcr = mfdcr (CPC0_PSR);
 	if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
 		/* boot via MPS or MPS mapping */
 		res = BOOT_MPS;
@@ -123,29 +123,29 @@ void setup_cs_reloc(void)
 	/* first findout on which cs the flash is */
 	if(mode & BOOT_MPS) {
 		/* map flash high on CS1 and MPS on CS0 */
-		mtdcr (ebccfga, pb0ap);
-		mtdcr (ebccfgd, MPS_AP);
-		mtdcr (ebccfga, pb0cr);
-		mtdcr (ebccfgd, MPS_CR);
+		mtdcr (EBC0_CFGADDR, PB0AP);
+		mtdcr (EBC0_CFGDATA, MPS_AP);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		mtdcr (EBC0_CFGDATA, MPS_CR);
 		/* we use the default values (max values) for the flash
 		 * because its real size is not yet known */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, FLASH_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, FLASH_CR_B);
+		mtdcr (EBC0_CFGADDR, PB1AP);
+		mtdcr (EBC0_CFGDATA, FLASH_AP);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		mtdcr (EBC0_CFGDATA, FLASH_CR_B);
 	}
 	else {
 		/* map flash high on CS0 and MPS on CS1 */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, MPS_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, MPS_CR);
+		mtdcr (EBC0_CFGADDR, PB1AP);
+		mtdcr (EBC0_CFGDATA, MPS_AP);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		mtdcr (EBC0_CFGDATA, MPS_CR);
 		/* we use the default values (max values) for the flash
 		 * because its real size is not yet known */
-		mtdcr (ebccfga, pb0ap);
-		mtdcr (ebccfgd, FLASH_AP);
-		mtdcr (ebccfga, pb0cr);
-		mtdcr (ebccfgd, FLASH_CR_B);
+		mtdcr (EBC0_CFGADDR, PB0AP);
+		mtdcr (EBC0_CFGDATA, FLASH_AP);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		mtdcr (EBC0_CFGDATA, FLASH_CR_B);
 	}
 }
 
@@ -217,34 +217,34 @@ unsigned long flash_init (void)
 	}
 	if(mode & BOOT_MPS) {
 		/* flash is on CS1 */
-		mtdcr(ebccfga, pb1cr);
-		flashcr = mfdcr (ebccfgd);
+		mtdcr(EBC0_CFGADDR, PB1CR);
+		flashcr = mfdcr (EBC0_CFGDATA);
 		/* we map the flash high in every case */
 		flashcr&=0x0001FFFF; /* mask out address bits */
 		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
 		flashcr|= (i << 17); /* size addr */
-		mtdcr(ebccfga, pb1cr);
-		mtdcr(ebccfgd, flashcr);
+		mtdcr(EBC0_CFGADDR, PB1CR);
+		mtdcr(EBC0_CFGDATA, flashcr);
 	}
 	else {
 		/* flash is on CS0 */
-		mtdcr(ebccfga, pb0cr);
-		flashcr = mfdcr (ebccfgd);
+		mtdcr(EBC0_CFGADDR, PB0CR);
+		flashcr = mfdcr (EBC0_CFGDATA);
 		/* we map the flash high in every case */
 		flashcr&=0x0001FFFF; /* mask out address bits */
 		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
 		flashcr|= (i << 17); /* size addr */
-		mtdcr(ebccfga, pb0cr);
-		mtdcr(ebccfgd, flashcr);
+		mtdcr(EBC0_CFGADDR, PB0CR);
+		mtdcr(EBC0_CFGDATA, flashcr);
 	}
 #if 0
 	/* enable this (PIP405/MIP405 only) if you want to test if
 	   the relocation has be done ok.
 	   This will disable both Chipselects */
-	mtdcr (ebccfga, pb0cr);
-	mtdcr (ebccfgd, 0L);
-	mtdcr (ebccfga, pb1cr);
-	mtdcr (ebccfgd, 0L);
+	mtdcr (EBC0_CFGADDR, PB0CR);
+	mtdcr (EBC0_CFGDATA, 0L);
+	mtdcr (EBC0_CFGADDR, PB1CR);
+	mtdcr (EBC0_CFGDATA, 0L);
 	printf("CS0 & CS1 switched off for test\n");
 #endif
 	/* patch version_string */
diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S
index 19d9220..f3d94c3 100644
--- a/board/mpl/mip405/init.S
+++ b/board/mpl/mip405/init.S
@@ -55,7 +55,7 @@
   .globl ext_bus_cntlr_init
 ext_bus_cntlr_init:
   mflr   r4                      /* save link register */
-  mfdcr  r3,strap                /* get strapping reg */
+  mfdcr  r3,CPC0_PSR                /* get strapping reg */
   andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
   bnelr                          /* jump back if PCI boot */
 
@@ -84,9 +84,9 @@ ext_bus_cntlr_init:
 	/*-----------------------------------------------------------------------
 	 * decide boot up mode
 	 *----------------------------------------------------------------------- */
-	addi		r4,0,pb0cr
-	mtdcr		ebccfga,r4
-	mfdcr		r4,ebccfgd
+	addi		r4,0,PB0CR
+	mtdcr		EBC0_CFGADDR,r4
+	mfdcr		r4,EBC0_CFGDATA
 
 	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
 	beq		0f				/* jump if 8 bit bus width */
@@ -96,18 +96,18 @@ ext_bus_cntlr_init:
    * Memory Bank 0 (16 Bit Flash) initialization
    *---------------------------------------------------------------------- */
 
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,(FLASH_AP_B)@h
 	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
 	addis   r4,0,(FLASH_CR_B)@h
 	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 	b				1f
 
 0:
@@ -117,66 +117,66 @@ ext_bus_cntlr_init:
 	* Memory Bank 0 Multi Purpose Socket initialization
 	*----------------------------------------------------------------------- */
 	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,(MPS_AP_B)@h
 	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
 	addis   r4,0,(MPS_CR_B)@h
 	ori     r4,r4,(MPS_CR_B)@l
 
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 
 1:
   /*-----------------------------------------------------------------------
    * Memory Bank 2-3-4-5-6 (not used) initialization
    *-----------------------------------------------------------------------*/
-  addi    r4,0,pb1cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB1CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb2cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB2CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb3cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB3CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb4cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB4CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb5cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB5CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb6cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB6CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb7cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB7CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
   nop				/* pass2 DCR errata #8 */
   blr
 
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 1738f54..d8279e8 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -256,16 +256,16 @@ int init_sdram (void)
 	gd->baudrate = 9600;
 	serial_init ();
 	/* set up the pld */
-	mtdcr (ebccfga, pb7ap);
-	mtdcr (ebccfgd, PLD_AP);
-	mtdcr (ebccfga, pb7cr);
-	mtdcr (ebccfgd, PLD_CR);
+	mtdcr (EBC0_CFGADDR, PB7AP);
+	mtdcr (EBC0_CFGDATA, PLD_AP);
+	mtdcr (EBC0_CFGADDR, PB7CR);
+	mtdcr (EBC0_CFGDATA, PLD_CR);
 	/* THIS IS OBSOLETE */
 	/* set up the board rev reg*/
-	mtdcr (ebccfga, pb5ap);
-	mtdcr (ebccfgd, BOARD_AP);
-	mtdcr (ebccfga, pb5cr);
-	mtdcr (ebccfgd, BOARD_CR);
+	mtdcr (EBC0_CFGADDR, PB5AP);
+	mtdcr (EBC0_CFGDATA, BOARD_AP);
+	mtdcr (EBC0_CFGADDR, PB5CR);
+	mtdcr (EBC0_CFGDATA, BOARD_CR);
 #ifdef SDRAM_DEBUG
 	/* get all informations from PLD */
 	serial_puts ("\nPLD Part  0x");
@@ -289,30 +289,30 @@ int init_sdram (void)
 		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
 #endif
 	/* set-up the chipselect machine */
-	mtdcr (ebccfga, pb0cr);		/* get cs0 config reg */
-	tmp = mfdcr (ebccfgd);
+	mtdcr (EBC0_CFGADDR, PB0CR);		/* get cs0 config reg */
+	tmp = mfdcr (EBC0_CFGDATA);
 	if ((tmp & 0x00002000) == 0) {
 		/* MPS Boot, set up the flash */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, FLASH_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, FLASH_CR);
+		mtdcr (EBC0_CFGADDR, PB1AP);
+		mtdcr (EBC0_CFGDATA, FLASH_AP);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		mtdcr (EBC0_CFGDATA, FLASH_CR);
 	} else {
 		/* Flash boot, set up the MPS */
-		mtdcr (ebccfga, pb1ap);
-		mtdcr (ebccfgd, MPS_AP);
-		mtdcr (ebccfga, pb1cr);
-		mtdcr (ebccfgd, MPS_CR);
+		mtdcr (EBC0_CFGADDR, PB1AP);
+		mtdcr (EBC0_CFGDATA, MPS_AP);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		mtdcr (EBC0_CFGDATA, MPS_CR);
 	}
 	/* set up UART0 (CS2) and UART1 (CS3) */
-	mtdcr (ebccfga, pb2ap);
-	mtdcr (ebccfgd, UART0_AP);
-	mtdcr (ebccfga, pb2cr);
-	mtdcr (ebccfgd, UART0_CR);
-	mtdcr (ebccfga, pb3ap);
-	mtdcr (ebccfgd, UART1_AP);
-	mtdcr (ebccfga, pb3cr);
-	mtdcr (ebccfgd, UART1_CR);
+	mtdcr (EBC0_CFGADDR, PB2AP);
+	mtdcr (EBC0_CFGDATA, UART0_AP);
+	mtdcr (EBC0_CFGADDR, PB2CR);
+	mtdcr (EBC0_CFGDATA, UART0_CR);
+	mtdcr (EBC0_CFGADDR, PB3AP);
+	mtdcr (EBC0_CFGDATA, UART1_AP);
+	mtdcr (EBC0_CFGADDR, PB3CR);
+	mtdcr (EBC0_CFGDATA, UART1_CR);
 	bc = in8 (PLD_BOARD_CFG_REG);
 #ifdef SDRAM_DEBUG
 	serial_puts ("\nstart SDRAM Setup\n");
@@ -348,8 +348,8 @@ int init_sdram (void)
 	/* trc_clocks is sum of trp_clocks + tras_clocks */
 	trc_clocks = trp_clocks + tras_clocks;
 	/* get SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	sdram_tim = mfdcr (memcfgd) & ~0x018FC01F;
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	sdram_tim = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
 	/* insert CASL value */
 	sdram_tim |= ((unsigned long) (cal_val)) << 23;
 	/* insert PTA value */
@@ -369,8 +369,8 @@ int init_sdram (void)
 	/* insert SZ value; */
 	tmp |= ((unsigned long) sdram_table[i].sz << 17);
 	/* get SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	sdram_bank = mfdcr (memcfgd) & ~0xFFCEE001;
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	sdram_bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
 	sdram_bank |= (baseaddr | tmp | 0x01);
 
 #ifdef SDRAM_DEBUG
@@ -380,8 +380,8 @@ int init_sdram (void)
 #endif
 
 	/* write SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, sdram_tim);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	mtdcr (SDRAM0_CFGDATA, sdram_tim);
 
 #ifdef SDRAM_DEBUG
 	serial_puts ("mb0cf: ");
@@ -390,23 +390,23 @@ int init_sdram (void)
 #endif
 
 	/* write SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, sdram_bank);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	mtdcr (SDRAM0_CFGDATA, sdram_bank);
 
 	if (get_bus_freq (tmp) > 110000000) {	/* > 110MHz */
 		/* get SDRAM refresh interval register */
-		mtdcr (memcfga, mem_rtr);
-		tmp = mfdcr (memcfgd) & ~0x3FF80000;
+		mtdcr (SDRAM0_CFGADDR, mem_rtr);
+		tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
 		tmp |= 0x07F00000;
 	} else {
 		/* get SDRAM refresh interval register */
-		mtdcr (memcfga, mem_rtr);
-		tmp = mfdcr (memcfgd) & ~0x3FF80000;
+		mtdcr (SDRAM0_CFGADDR, mem_rtr);
+		tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
 		tmp |= 0x05F00000;
 	}
 	/* write SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 	/* enable ECC if used */
 #if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI)
 	if (sdram_table[i].ecc) {
@@ -415,19 +415,19 @@ int init_sdram (void)
 #ifdef SDRAM_DEBUG
 		serial_puts ("disable ECC.. ");
 #endif
-		mtdcr (memcfga, mem_ecccf);
-		tmp = mfdcr (memcfgd);
+		mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+		tmp = mfdcr (SDRAM0_CFGDATA);
 		tmp &= 0xff0fffff;		/* disable all banks */
-		mtdcr (memcfga, mem_ecccf);
+		mtdcr (SDRAM0_CFGADDR, mem_ecccf);
 		/* set up SDRAM Controller with ECC enabled */
 #ifdef SDRAM_DEBUG
 		serial_puts ("setup SDRAM Controller.. ");
 #endif
-		mtdcr (memcfgd, tmp);
-		mtdcr (memcfga, mem_mcopt1);
-		tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x90800000;
-		mtdcr (memcfga, mem_mcopt1);
-		mtdcr (memcfgd, tmp);
+		mtdcr (SDRAM0_CFGDATA, tmp);
+		mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+		tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000;
+		mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+		mtdcr (SDRAM0_CFGDATA, tmp);
 		udelay (600);
 #ifdef SDRAM_DEBUG
 		serial_puts ("fill the memory..\n");
@@ -447,19 +447,19 @@ int init_sdram (void)
 		serial_puts ("enable ECC\n");
 #endif
 		udelay (400);
-		mtdcr (memcfga, mem_ecccf);
-		tmp = mfdcr (memcfgd);
+		mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+		tmp = mfdcr (SDRAM0_CFGDATA);
 		tmp |= 0x00800000;		/* enable bank 0 */
-		mtdcr (memcfgd, tmp);
+		mtdcr (SDRAM0_CFGDATA, tmp);
 		udelay (400);
 	} else
 #endif
 	{
 		/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-		mtdcr (memcfga, mem_mcopt1);
-		tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80C00000;
-		mtdcr (memcfga, mem_mcopt1);
-		mtdcr (memcfgd, tmp);
+		mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+		tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80C00000;
+		mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+		mtdcr (SDRAM0_CFGDATA, tmp);
 		udelay (400);
 	}
 	serial_puts ("\n");
@@ -631,14 +631,14 @@ phys_size_t initdram (int board_type)
 	ds = 0;
 	/* since the DRAM controller is allready set up, calculate the size with the
 	   bank registers    */
-	mtdcr (memcfga, mem_mb0cf);
-	bank_reg[0] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb1cf);
-	bank_reg[1] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb2cf);
-	bank_reg[2] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb3cf);
-	bank_reg[3] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
 	TotalSize = 0;
 	for (i = 0; i < 4; i++) {
 		if ((bank_reg[i] & 0x1) == 0x1) {
@@ -648,8 +648,8 @@ phys_size_t initdram (int board_type)
 		} else
 			ds = 1;
 	}
-	mtdcr (memcfga, mem_ecccf);
-	tmp = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+	tmp = mfdcr (SDRAM0_CFGDATA);
 
 	if (!tmp)
 		printf ("No ");
@@ -687,7 +687,7 @@ int misc_init_r (void)
 	rtc_get (&tm);
 	start=get_timer(0);
 	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(strap) & PSR_ROM_LOC)
+	if (mfdcr(CPC0_PSR) & PSR_ROM_LOC)
 	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
 
 	return (0);
diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S
index 61f37d7..18e8b09 100644
--- a/board/mpl/pip405/init.S
+++ b/board/mpl/pip405/init.S
@@ -54,7 +54,7 @@
   .globl ext_bus_cntlr_init
  ext_bus_cntlr_init:
   mflr   r4                      /* save link register */
-  mfdcr  r3,strap                /* get strapping reg */
+  mfdcr  r3,CPC0_PSR                /* get strapping reg */
   andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
   bnelr                          /* jump back if PCI boot */
 
@@ -83,9 +83,9 @@
 	/*-----------------------------------------------------------------------
 	 * decide boot up mode
 	 *----------------------------------------------------------------------- */
-	addi		r4,0,pb0cr
-	mtdcr		ebccfga,r4
-	mfdcr		r4,ebccfgd
+	addi		r4,0,PB0CR
+	mtdcr		EBC0_CFGADDR,r4
+	mfdcr		r4,EBC0_CFGDATA
 
 	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
 	beq		0f				/* jump if 8 bit bus width */
@@ -95,18 +95,18 @@
    * Memory Bank 0 (16 Bit Flash) initialization
    *---------------------------------------------------------------------- */
 
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,(FLASH_AP_B)@h
 	ori     r4,r4,(FLASH_AP_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
 	addis   r4,0,(FLASH_CR_B)@h
 	ori     r4,r4,(FLASH_CR_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 	b				1f
 
 0:
@@ -115,65 +115,65 @@
 	* Memory Bank 0 Multi Purpose Socket initialization
 	*----------------------------------------------------------------------- */
 	/* 0x7F8FFE80 slowest boot */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB1AP
+	mtdcr   EBC0_CFGADDR,r4
 	addis   r4,0,(MPS_AP_B)@h
 	ori     r4,r4,(MPS_AP_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
+	addi    r4,0,PB0CR
+	mtdcr   EBC0_CFGADDR,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
 	addis   r4,0,(MPS_CR_B)@h
 	ori     r4,r4,(MPS_CR_B)@l
-	mtdcr   ebccfgd,r4
+	mtdcr   EBC0_CFGDATA,r4
 
 
 1:
   /*-----------------------------------------------------------------------
    * Memory Bank 2-3-4-5-6 (not used) initialization
    *-----------------------------------------------------------------------*/
-  addi    r4,0,pb1cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB1CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb2cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB2CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb3cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB3CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb4cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB4CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb5cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB5CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb6cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB6CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
 
-  addi    r4,0,pb7cr
-  mtdcr   ebccfga,r4
+  addi    r4,0,PB7CR
+  mtdcr   EBC0_CFGADDR,r4
   addis   r4,0,0x0000
   ori     r4,r4,0x0000
-  mtdcr   ebccfgd,r4
+  mtdcr   EBC0_CFGDATA,r4
   nop				/* pass2 DCR errata #8 */
   blr
 
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 677437d..e00d1d0 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -193,10 +193,10 @@ int board_early_init_f (void)
 	unsigned char cal_index, cal_val, spd_version, spd_chksum;
 	unsigned char buf[8];
 	/* set up the config port */
-	mtdcr (ebccfga, pb7ap);
-	mtdcr (ebccfgd, CONFIG_PORT_AP);
-	mtdcr (ebccfga, pb7cr);
-	mtdcr (ebccfgd, CONFIG_PORT_CR);
+	mtdcr (EBC0_CFGADDR, PB7AP);
+	mtdcr (EBC0_CFGDATA, CONFIG_PORT_AP);
+	mtdcr (EBC0_CFGADDR, PB7CR);
+	mtdcr (EBC0_CFGDATA, CONFIG_PORT_CR);
 
 	memclk = get_bus_freq (tmemclk);
 	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
@@ -361,8 +361,8 @@ int board_early_init_f (void)
 		SDRAM_err ("unsupported SDRAM");
 
 	/* get SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	tmp = mfdcr (memcfgd) & ~0x018FC01F;
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	tmp = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
 	/* insert CASL value */
 /*  tmp |= ((unsigned long)cal_val) << 23; */
 	tmp |= ((unsigned long) cal_val) << 23;
@@ -385,8 +385,8 @@ int board_early_init_f (void)
 #endif
 
 	/* write SDRAM timing register */
-	mtdcr (memcfga, mem_sdtr1);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 	baseaddr = CONFIG_SYS_SDRAM_BASE;
 	bank_size = (((unsigned long) density) << 22) / 2;
 	/* insert AM value */
@@ -418,8 +418,8 @@ int board_early_init_f (void)
 		SDRAM_err ("unsupported SDRAM");
 	}	/* endswitch */
 	/* get SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
 	bank |= (baseaddr | tmp | 0x01);
 #ifdef SDRAM_DEBUG
 	serial_puts ("bank0: baseaddr: ");
@@ -434,12 +434,12 @@ int board_early_init_f (void)
 	sdram_size += bank_size;
 
 	/* write SDRAM bank 0 register */
-	mtdcr (memcfga, mem_mb0cf);
-	mtdcr (memcfgd, bank);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	mtdcr (SDRAM0_CFGDATA, bank);
 
 	/* get SDRAM bank 1 register */
-	mtdcr (memcfga, mem_mb1cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
 	sdram_size = 0;
 
 #ifdef SDRAM_DEBUG
@@ -459,12 +459,12 @@ int board_early_init_f (void)
 	serial_puts ("\n");
 #endif
 	/* write SDRAM bank 1 register */
-	mtdcr (memcfga, mem_mb1cf);
-	mtdcr (memcfgd, bank);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	mtdcr (SDRAM0_CFGDATA, bank);
 
 	/* get SDRAM bank 2 register */
-	mtdcr (memcfga, mem_mb2cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
 
 	bank |= (baseaddr | tmp | 0x01);
 
@@ -482,12 +482,12 @@ int board_early_init_f (void)
 	sdram_size += bank_size;
 
 	/* write SDRAM bank 2 register */
-	mtdcr (memcfga, mem_mb2cf);
-	mtdcr (memcfgd, bank);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	mtdcr (SDRAM0_CFGDATA, bank);
 
 	/* get SDRAM bank 3 register */
-	mtdcr (memcfga, mem_mb3cf);
-	bank = mfdcr (memcfgd) & ~0xFFCEE001;
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
 
 #ifdef SDRAM_DEBUG
 	serial_puts ("bank3: baseaddr: ");
@@ -509,13 +509,13 @@ int board_early_init_f (void)
 #endif
 
 	/* write SDRAM bank 3 register */
-	mtdcr (memcfga, mem_mb3cf);
-	mtdcr (memcfgd, bank);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	mtdcr (SDRAM0_CFGDATA, bank);
 
 
 	/* get SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	tmp = mfdcr (memcfgd) & ~0x3FF80000;
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
 
 	if (tmemclk < NSto10PS (16))
 		tmp |= 0x05F00000;
@@ -523,14 +523,14 @@ int board_early_init_f (void)
 		tmp |= 0x03F80000;
 
 	/* write SDRAM refresh interval register */
-	mtdcr (memcfga, mem_rtr);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 
 	/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
-	mtdcr (memcfga, mem_mcopt1);
-	tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000;
-	mtdcr (memcfga, mem_mcopt1);
-	mtdcr (memcfgd, tmp);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80E00000;
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	mtdcr (SDRAM0_CFGDATA, tmp);
 
 
    /*-------------------------------------------------------------------------+
@@ -619,14 +619,14 @@ phys_size_t initdram (int board_type)
 	/* since the DRAM controller is allready set up,
 	 * calculate the size with the bank registers
 	 */
-	mtdcr (memcfga, mem_mb0cf);
-	bank_reg[0] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb1cf);
-	bank_reg[1] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb2cf);
-	bank_reg[2] = mfdcr (memcfgd);
-	mtdcr (memcfga, mem_mb3cf);
-	bank_reg[3] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
 	TotalSize = 0;
 	for (i = 0; i < 4; i++) {
 		if ((bank_reg[i] & 0x1) == 0x1) {
@@ -668,7 +668,7 @@ int misc_init_r (void)
 	gd->bd->bi_flashoffset=0;
 
 	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
-	if (mfdcr(strap) & PSR_ROM_LOC)
+	if (mfdcr(CPC0_PSR) & PSR_ROM_LOC)
 	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
 
 	return (0);
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index aa8a097..40bec8e 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -92,7 +92,7 @@ int checkboard (void)
 	u16 index      = boardVersReg & 0x0f;
 
 	/* Cannot be done in board_early_init */
-	mtdcr(cntrl0,  CPC0_CR0_VALUE);
+	mtdcr(CPC0_CR0,  CPC0_CR0_VALUE);
 
 	/* Force /RTS to active. The board it not wired quite
 	 *  correctly to use cts/rtc flow control, so just force the
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index 5eb33d3..836c034 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -94,8 +94,8 @@ int board_early_init_f(void)
 	}
 	mtsdr(SDR0_CP440, 0x0EAAEA02);  /* [Nto1] = 1*/
 #endif
-	mtdcr(ebccfga, xbcfg);
-	mtdcr(ebccfgd, 0xb8400000);
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	mtdcr(EBC0_CFGDATA, 0xb8400000);
 
 	/*
 	 * Setup the GPIO pins
@@ -152,8 +152,8 @@ int board_early_init_f(void)
 	mtdcr(uic2tr, 0x00000000);	/* per ref-board manual */
 	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
-	mtsdr(sdr_pfc0, 0x00003E00);	/* Pin function:  */
-	mtsdr(sdr_pfc1, 0x00848000);	/* Pin function: UART0 has 4 pins */
+	mtsdr(SDR0_PFC0, 0x00003E00);	/* Pin function:  */
+	mtsdr(SDR0_PFC1, 0x00848000);	/* Pin function: UART0 has 4 pins */
 
 	/* setup BOOT FLASH */
 	mtsdr(SDR0_CUST0, 0xC0082350);
@@ -324,7 +324,7 @@ int board_with_pci(void)
 {
 	u32 reg;
 
-	mfsdr(sdr_pci0, reg);
+	mfsdr(SDR0_PCI0, reg);
 	return (reg & SDR0_XCR_PAE_MASK);
 }
 
@@ -350,28 +350,28 @@ int pci_pre_init(struct pci_controller *hose)
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000); /* Sequoia */
 
 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);  /* Sequoia */
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);  /* Sequoia */
 
 	/*
 	 * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM.
 	 * Workaround: Disable write pipelining to DDR SDRAM by setting
 	 * PLB0_ACR[WRP] = 0.
 	 */
-	mtdcr(plb0_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
+	mtdcr(PLB0_ACR, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
 	/* Segment1 */
-	mtdcr(plb1_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
+	mtdcr(PLB1_ACR, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
 	return board_with_pci();
 }
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 5c2ec35..0546cd7 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -89,11 +89,11 @@ static int wait_for_dlllock(void)
 	/* -----------------------------------------------------------+
 	 * Wait for the DCC master delay line to finish calibration
 	 * ----------------------------------------------------------*/
-	mtdcr(memcfga, DDR0_17);
+	mtdcr(SDRAM0_CFGADDR, DDR0_17);
 	val = DDR0_17_DLLLOCKREG_UNLOCKED;
 
 	while (wait != 0xffff) {
-		val = mfdcr(memcfgd);
+		val = mfdcr(SDRAM0_CFGDATA);
 		if ((val & DDR0_17_DLLLOCKREG_MASK) ==
 		    DDR0_17_DLLLOCKREG_LOCKED)
 			/* dlllockreg bit on */
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
index 67c1b0b..9054282 100644
--- a/board/netstal/mcu25/mcu25.c
+++ b/board/netstal/mcu25/mcu25.c
@@ -71,8 +71,8 @@ int board_early_init_f (void)
 	mtdcr(uictr, 0x00000000); /* set int trigger levels */
 	mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
 
-	mtdcr(cntrl1, CPC0_CR1_VALUE);
-	mtdcr(ecr, 0x60606000);
+	mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
+	mtdcr(CPC0_ECR, 0x60606000);
 	mtdcr(CPC0_EIRR, 0x7C000000);
 	out32(GPIO0_OR,		CONFIG_SYS_GPIO0_OR );
 	out32(GPIO0_TCR,	CONFIG_SYS_GPIO0_TCR);
@@ -103,7 +103,7 @@ int checkboard (void)
 	u16 index      = boardVersReg & 0xf0;
 
 	/* Cannot be done in board_early_init */
-	mtdcr(cntrl0,  CPC0_CR0_VALUE);
+	mtdcr(CPC0_CR0,  CPC0_CR0_VALUE);
 
 	/* Force /RTS to active. The board it not wired quite
 	 * correctly to use cts/rtc flow control, so just force the
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 47d6391..f966d02 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -143,9 +143,9 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	reg = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
 
 	/*--------------------------------------------------------------------
 	 * GPIO's are alreay setup in cpu/ppc4xx/cpu_init.c
@@ -174,10 +174,10 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup other serial configuration
 	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00000000);	/* Pin function: enable GPIO49-63 */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins, select IRQ5 */
+	mfsdr(SDR0_PCI0, reg);
+	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(SDR0_PFC0, 0x00000000);	/* Pin function: enable GPIO49-63 */
+	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins, select IRQ5 */
 
 	return 0;
 }
@@ -444,8 +444,8 @@ int misc_init_r (void)
 	load_ethaddr();
 
 	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	pbcr = mfdcr(EBC0_CFGDATA);
 	switch (gd->bd->bi_flashsize) {
 	case 1 << 20:
 		size_val = 0;
@@ -473,8 +473,8 @@ int misc_init_r (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
+	mtdcr(EBC0_CFGADDR, PB0CR);
+	mtdcr(EBC0_CFGDATA, pbcr);
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -571,35 +571,35 @@ int pci_pre_init(struct pci_controller *hose)
 	  | Set priority for all PLB3 devices to 0.
 	  | Set PLB3 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
+	mfsdr(SD0_AMP1, addr);
+	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB3_ACR);
+	mtdcr(PLB3_ACR, addr | 0x80000000);
 
 	/*-------------------------------------------------------------------------+
 	  | Set priority for all PLB4 devices to 0.
 	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
+	mfsdr(SD0_AMP0, addr);
+	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(PLB4_ACR, addr);
 
 	/*-------------------------------------------------------------------------+
 	  | Set Nebula PLB4 arbiter to fair mode.
 	  +-------------------------------------------------------------------------*/
 	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
+	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+	mtdcr(PLB0_ACR, addr);
 
 	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
+	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+	mtdcr(PLB1_ACR, addr);
 
 	return 1;
 }
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index dc34319..be79b42 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -39,7 +39,7 @@ int board_early_init_f (void)
 	/*-------------------------------------------------------------------------
 	 * Initialize EBC CONFIG
 	 *-------------------------------------------------------------------------*/
-	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
 	      EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
 	      EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
 	      EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
@@ -96,7 +96,7 @@ int board_early_init_f (void)
 	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
 
 	/* Setup GPIO/IRQ multiplexing */
-	mtsdr(sdr_pfc0, 0x01a33e00);
+	mtsdr(SDR0_PFC0, 0x01a33e00);
 
 	return 0;
 }
@@ -165,7 +165,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The ocotea board is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index 1a0486f..18054e4 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -85,14 +85,14 @@ int board_early_init_f(void)
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(EBC0_CFGADDR, EBC0_CFG);
+	reg = mfdcr(EBC0_CFGDATA);
+	mtdcr(EBC0_CFGDATA, reg | 0x04000000);	/* Set ATC */
 
 	/*--------------------------------------------------------------------
 	 * Setup pin multiplexing (GPIO/IRQ...)
 	 *-------------------------------------------------------------------*/
-	mtdcr(cpc0_gpio, 0x03F01F80);
+	mtdcr(CPC0_GPIO, 0x03F01F80);
 
 	out32(GPIO0_ODR, 0x00000000);	/* no open drain pins      */
 	out32(GPIO0_TCR, CONFIG_SYS_GPIO_RDY | CONFIG_SYS_EREADY_IO | CONFIG_SYS_LED_RED | CONFIG_SYS_LED_GREEN);
@@ -153,12 +153,12 @@ int misc_init_r (void)
 	 * Check if only one FLASH bank is available
 	 */
 	if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
-		mtebc(pb1cr, 0);			/* disable cs */
-		mtebc(pb1ap, 0);
-		mtebc(pb2cr, 0);			/* disable cs */
-		mtebc(pb2ap, 0);
-		mtebc(pb3cr, 0);			/* disable cs */
-		mtebc(pb3ap, 0);
+		mtebc(PB1CR, 0);			/* disable cs */
+		mtebc(PB1AP, 0);
+		mtebc(PB2CR, 0);			/* disable cs */
+		mtebc(PB2AP, 0);
+		mtebc(PB3CR, 0);			/* disable cs */
+		mtebc(PB3AP, 0);
 	}
 
 	return 0;
@@ -185,7 +185,7 @@ int pci_pre_init(struct pci_controller *hose)
 	 *	The P3P440 board is always configured as the host & requires the
 	 *	PCI arbiter to be disabled because it's an PMC module.
 	 *--------------------------------------------------------------------------*/
-	strap = mfdcr(cpc0_strp1);
+	strap = mfdcr(CPC0_STRP1);
 	if (strap & 0x00100000) {
 		printf("PCI: CPC0_STRP1[PAE] set.\n");
 		return 0;
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index b8160c8..d8b0564 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -322,7 +322,7 @@ int pci_pre_init(struct pci_controller * hose )
 	 *	The metrobox is always configured as the host & requires the
 	 *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
 		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 		return 0;
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index 92f5247..b80c206 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -67,7 +67,7 @@ int board_early_init_f (void)
 	ppc440_gpio_regs_t *gpio_regs;
 
 	/* Enable GPIO interrupts */
-	mtsdr(sdr_pfc0, 0x00103E00);
+	mtsdr(SDR0_PFC0, 0x00103E00);
 
 	/* Setup access for LEDs, and system topology info */
 	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
@@ -80,7 +80,7 @@ int board_early_init_f (void)
 	/*--------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------*/
-	mtebc(xbcfg,
+	mtebc(EBC0_CFG,
 	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
 	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
 	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
@@ -90,7 +90,7 @@ int board_early_init_f (void)
 	/*--------------------------------------------------------------------+
 	  | 1/2 MB FLASH. Initialize bank 0 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb0ap,
+	mtebc(PB0AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -98,12 +98,12 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
+	mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 	/*--------------------------------------------------------------------+
 	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb1ap,
+	mtebc(PB1AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -111,13 +111,13 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+	mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 
 	/*--------------------------------------------------------------------+
 	  | Compact Flash, uses 2 Chip Selects (2 & 6)
 	  +-------------------------------------------------------------------*/
-	mtebc(pb2ap,
+	mtebc(PB2AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -125,40 +125,40 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+	mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
 
 	/*--------------------------------------------------------------------+
 	  | KaRef Scan FPGA. Initialize bank 3 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb5ap,
+	mtebc(PB5AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+	mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
 	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
 	  | Initialize bank 4 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb4ap,
+	mtebc(PB4AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+	mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) |
 	      EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
 	  | OFEM FPGA  Initialize bank 5 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb3ap,
+	mtebc(PB3AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
@@ -166,14 +166,14 @@ int board_early_init_f (void)
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
 
-	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48400000) |
+	mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 
 	/*--------------------------------------------------------------------+
 	  | Compact Flash, uses 2 Chip Selects (2 & 6)
 	  +-------------------------------------------------------------------*/
-	mtebc(pb6ap,
+	mtebc(PB6AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -181,20 +181,20 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+	mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
 
 	/*--------------------------------------------------------------------+
 	  | BME-32. Initialize bank 7 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb7ap,
+	mtebc(PB7AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+	mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index 27d7f74..ad3f9bc 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -57,7 +57,7 @@ int board_early_init_f (void)
 	ppc440_gpio_regs_t *gpio_regs;
 
 	/* Enable GPIO interrupts */
-	mtsdr(sdr_pfc0, 0x00103E00);
+	mtsdr(SDR0_PFC0, 0x00103E00);
 
 	/* Setup access for LEDs, and system topology info */
 	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
@@ -70,7 +70,7 @@ int board_early_init_f (void)
 	/*--------------------------------------------------------------------+
 	  | Initialize EBC CONFIG
 	  +-------------------------------------------------------------------*/
-	mtebc(xbcfg,
+	mtebc(EBC0_CFG,
 	      EBC_CFG_LE_UNLOCK	   | EBC_CFG_PTD_ENABLE |
 	      EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
 	      EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
@@ -80,7 +80,7 @@ int board_early_init_f (void)
 	/*--------------------------------------------------------------------+
 	  | 1/2 MB FLASH. Initialize bank 0 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb0ap,
+	mtebc(PB0AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -88,12 +88,12 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
+	mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 	/*--------------------------------------------------------------------+
 	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb1ap,
+	mtebc(PB1AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -101,13 +101,13 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+	mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 
 	/*--------------------------------------------------------------------+
 	  | Compact Flash, uses 2 Chip Selects (2 & 6)
 	  +-------------------------------------------------------------------*/
-	mtebc(pb2ap,
+	mtebc(PB2AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -115,20 +115,20 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
+	mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
 
 	/*--------------------------------------------------------------------+
 	  | OPTO & OFEM FPGA. Initialize bank 3 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb3ap,
+	mtebc(PB3AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
+	mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48200000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
@@ -136,34 +136,34 @@ int board_early_init_f (void)
 	  | MAC A & B for Kamino.  OFEM FPGA decodes the addresses
 	  | Initialize bank 4 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb4ap,
+	mtebc(PB4AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
+	mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
 	  | Metrobox MAC B  Initialize bank 5 with default values.
 	  | KA REF FPGA	 Initialize bank 5 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb5ap,
+	mtebc(PB5AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) |
+	mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48700000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
 	  | Compact Flash, uses 2 Chip Selects (2 & 6)
 	  +-------------------------------------------------------------------*/
-	mtebc(pb6ap,
+	mtebc(PB6AP,
 	      EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
 	      EBC_BXAP_BCE_DISABLE  | EBC_BXAP_CSN_ENCODE(1) |
 	      EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
@@ -171,20 +171,20 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
+	mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
 
 	/*--------------------------------------------------------------------+
 	  | BME-32. Initialize bank 7 with default values.
 	  +-------------------------------------------------------------------*/
-	mtebc(pb7ap,
+	mtebc(PB7AP,
 	      EBC_BXAP_RE_ENABLED    | EBC_BXAP_SOR_NONDELAYED |
 	      EBC_BXAP_BME_DISABLED  | EBC_BXAP_TWT_ENCODE(3) |
 	      EBC_BXAP_TH_ENCODE(1)  | EBC_BXAP_WBF_ENCODE(0) |
 	      EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
 	      EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
 
-	mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
+	mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
 
 	/*--------------------------------------------------------------------+
diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c
index 7818cd7..66842ea 100644
--- a/board/sbc405/sbc405.c
+++ b/board/sbc405/sbc405.c
@@ -52,7 +52,7 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000);
+	mtebc (EBC0_CFG, 0xa8400000);
 
 	return 0;
 }
diff --git a/board/sc3/init.S b/board/sc3/init.S
index f97a5ea..6052c66 100644
--- a/board/sc3/init.S
+++ b/board/sc3/init.S
@@ -58,7 +58,7 @@ ext_bus_cntlr_init:
  * We need the current boot up configuration to set correct
  * timings into internal flash and external flash
  */
-		mfdcr r24,strap			/* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx
+		mfdcr r24,CPC0_PSR		/* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx
 						   0 0 -> 8 bit external ROM
 						   0 1 -> 16 bit internal ROM */
 		addi r4,0,2
@@ -113,8 +113,8 @@ ext_bus_cntlr_init:
  * We only have to change the timing. Mapping is ok by boot-strapping
  *----------------------------------------------------------------------- */
 
-		li r4,pb0ap				/* PB0AP=Peripheral Bank 0 Access Parameters */
-		mtdcr ebccfga,r4
+		li r4,PB1AP				/* PB0AP=Peripheral Bank 0 Access Parameters */
+		mtdcr EBC0_CFGADDR,r4
 
 		mr r4,r26				/* assume internal fast flash is boot flash */
 		cmpwi r24,0x2000			/* assumption true? ... */
@@ -122,27 +122,27 @@ ext_bus_cntlr_init:
 		mr r4,r25				/* ...no, use the slow variant */
 		mr r25,r26				/* use this for the other flash */
 1:
-		mtdcr ebccfgd,r4			/* change timing now */
+		mtdcr EBC0_CFGDATA,r4			/* change timing now */
 
-		li r4,pb0cr				/* PB0CR=Peripheral Bank 0 Control Register */
-		mtdcr ebccfga,r4
-		mfdcr r4,ebccfgd
+		li r4,PB0CR				/* PB0CR=Peripheral Bank 0 Control Register */
+		mtdcr EBC0_CFGADDR,r4
+		mfdcr r4,EBC0_CFGDATA
 		lis r3,0x0001
 		ori r3,r3,0x8000			/* allow reads and writes */
 		or r4,r4,r3
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 /*-----------------------------------------------------------------------
  * Memory Bank 3 (Second-Flash) initialization
  * 0xF0000000...0xF01FFFFF -> 2MB
  *----------------------------------------------------------------------- */
 
-		li r4,pb3ap				/* Peripheral Bank 1 Access Parameter */
-		mtdcr ebccfga,r4
-		mtdcr ebccfgd,r2			/* change timing */
+		li r4,PB3AP				/* Peripheral Bank 1 Access Parameter */
+		mtdcr EBC0_CFGADDR,r4
+		mtdcr EBC0_CFGDATA,r2			/* change timing */
 
-		li r4,pb3cr				/* Peripheral Bank 1 Configuration Registers */
-		mtdcr ebccfga,r4
+		li r4,PB3CR				/* Peripheral Bank 1 Configuration Registers */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0xF003
 		ori r4,r4,0x8000
@@ -151,7 +151,7 @@ ext_bus_cntlr_init:
  */
 		xori r24,r24,0x2000			/* invert current bus width */
 		or r4,r4,r24
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 /*-----------------------------------------------------------------------
  * Memory Bank 1 (NAND-Flash) initialization
@@ -169,28 +169,28 @@ ext_bus_cntlr_init:
  * ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold)
  *----------------------------------------------------------------------- */
 
-		li r4,pb1ap				/* Peripheral Bank 1 Access Parameter */
-		mtdcr ebccfga,r4
+		li r4,PB1AP				/* Peripheral Bank 1 Access Parameter */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0x0000
 		ori r4,r4,0x0200
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
-		li r4,pb1cr				/* Peripheral Bank 1 Configuration Registers */
-		mtdcr ebccfga,r4
+		li r4,PB1CR				/* Peripheral Bank 1 Configuration Registers */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0x77D1
 		ori r4,r4,0x8000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 
 /* USB init (without acceleration) */
 #ifndef CONFIG_ISP1161_PRESENT
-		li r4,pb4ap				/* PB4AP=Peripheral Bank 4 Access Parameters */
-		mtdcr ebccfga,r4
+		li r4,PB4AP				/* PB4AP=Peripheral Bank 4 Access Parameters */
+		mtdcr EBC0_CFGADDR,r4
 		lis r4,0x0180
 		ori r4,r4,0x5940
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 #endif
 
 /*-----------------------------------------------------------------------
@@ -204,8 +204,8 @@ ext_bus_cntlr_init:
  A7/A24=0 -> memory cycle
  A7/ /A24=1 -> I/O cycle
 */
-		li r4,pb2ap				/* PB2AP=Peripheral Bank 2 Access Parameters */
-		mtdcr ebccfga,r4
+		li r4,PB2AP				/* PB2AP=Peripheral Bank 2 Access Parameters */
+		mtdcr EBC0_CFGADDR,r4
 /*
  We emulate an ISA access
 
@@ -226,58 +226,58 @@ ext_bus_cntlr_init:
 		lis r4,0x0100
 		ori r4,r4,0x0340
 #endif
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 #ifdef IDE_USES_ISA_EMULATION
-		li r25,pb5ap				/* PB5AP=Peripheral Bank 5 Access Parameters */
-		mtdcr ebccfga,r25
-		mtdcr ebccfgd,r4
+		li r25,PB5AP				/* PB5AP=Peripheral Bank 5 Access Parameters */
+		mtdcr EBC0_CFGADDR,r25
+		mtdcr EBC0_CFGDATA,r4
 #endif
 
-		li r25,pb6ap				/* PB6AP=Peripheral Bank 6 Access Parameters */
-		mtdcr ebccfga,r25
-		mtdcr ebccfgd,r4
-		li r25,pb7ap				/* PB7AP=Peripheral Bank 7 Access Parameters */
-		mtdcr ebccfga,r25
-		mtdcr ebccfgd,r4
+		li r25,PB6AP				/* PB6AP=Peripheral Bank 6 Access Parameters */
+		mtdcr EBC0_CFGADDR,r25
+		mtdcr EBC0_CFGDATA,r4
+		li r25,PB7AP				/* PB7AP=Peripheral Bank 7 Access Parameters */
+		mtdcr EBC0_CFGADDR,r25
+		mtdcr EBC0_CFGDATA,r4
 
-		li r25,pb2cr				/* PB2CR=Peripheral Bank 2 Configuration Register */
-		mtdcr ebccfga,r25
+		li r25,PB2CR				/* PB2CR=Peripheral Bank 2 Configuration Register */
+		mtdcr EBC0_CFGADDR,r25
 
 		lis r4,0x780B
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 /*
  * the other areas are only 1MiB in size
  */
 		lis r4,0x7401
 		ori r4,r4,0xA000
 
-		li r25,pb6cr				/* PB6CR=Peripheral Bank 6 Configuration Register */
-		mtdcr ebccfga,r25
+		li r25,PB6CR				/* PB6CR=Peripheral Bank 6 Configuration Register */
+		mtdcr EBC0_CFGADDR,r25
 		lis r4,0x7401
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
-		li r25,pb7cr				/* PB7CR=Peripheral Bank 7 Configuration Register */
-		mtdcr ebccfga,r25
+		li r25,PB7CR				/* PB7CR=Peripheral Bank 7 Configuration Register */
+		mtdcr EBC0_CFGADDR,r25
 		lis r4,0x7411
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 #ifndef CONFIG_ISP1161_PRESENT
-		li r25,pb4cr				/* PB4CR=Peripheral Bank 4 Configuration Register */
-		mtdcr ebccfga,r25
+		li r25,PB4CR				/* PB4CR=Peripheral Bank 4 Configuration Register */
+		mtdcr EBC0_CFGADDR,r25
 		lis r4,0x7421
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 #endif
 #ifdef IDE_USES_ISA_EMULATION
-		li r25,pb5cr				/* PB5CR=Peripheral Bank 5 Configuration Register */
-		mtdcr ebccfga,r25
+		li r25,PB5CR				/* PB5CR=Peripheral Bank 5 Configuration Register */
+		mtdcr EBC0_CFGADDR,r25
 		lis r4,0x0000
 		ori r4,r4,0x0000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 #endif
 
 /*-----------------------------------------------------------------------
@@ -315,19 +315,19 @@ ext_bus_cntlr_init:
 
 #ifdef CONFIG_ISP1161_PRESENT
 
-		li r4,pb4ap				/* PB4AP=Peripheral Bank 4 Access Parameters */
-		mtdcr ebccfga,r4
+		li r4,PB4AP				/* PB4AP=Peripheral Bank 4 Access Parameters */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0x030D
 		ori r4,r4,0x5E80
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
-		li r4,pb4cr				/* PB2CR=Peripheral Bank 4 Configuration Register */
-		mtdcr ebccfga,r4
+		li r4,PB4CR				/* PB2CR=Peripheral Bank 4 Configuration Register */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0x77C1
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
 #endif
 
@@ -352,28 +352,28 @@ ext_bus_cntlr_init:
  *
  *----------------------------------------------------------------------- */
 
-		li r4,pb5ap
-		mtdcr ebccfga,r4
+		li r4,PB5AP
+		mtdcr EBC0_CFGADDR,r4
 		lis r4,0x040C
 		ori r4,r4,0x0200
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 
-		li r4,pb5cr			/* PB2CR=Peripheral Bank 2 Configuration Register */
-		mtdcr ebccfga,r4
+		li r4,PB5CR			/* PB2CR=Peripheral Bank 2 Configuration Register */
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0x7A01
 		ori r4,r4,0xA000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 #endif
 /*
  * External Peripheral Control Register
  */
-		li r4,epcr
-		mtdcr ebccfga,r4
+		li r4,EBC0_CFG
+		mtdcr EBC0_CFGADDR,r4
 
 		lis r4,0xB84E
 		ori r4,r4,0xF000
-		mtdcr ebccfgd,r4
+		mtdcr EBC0_CFGDATA,r4
 /*
  * drive POST code
  */
diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c
index 6c82fe7..5ae7b12 100644
--- a/board/sc3/sc3.c
+++ b/board/sc3/sc3.c
@@ -199,14 +199,14 @@ int board_start_ide(void)
 static int sc3_cameron_init (void)
 {
 	/* Set up the Memory Controller for the CAMERON version */
-	mtebc (pb4ap, 0x01805940);
-	mtebc (pb4cr, 0x7401a000);
-	mtebc (pb5ap, 0x01805940);
-	mtebc (pb5cr, 0x7401a000);
-	mtebc (pb6ap, 0x0);
-	mtebc (pb6cr, 0x0);
-	mtebc (pb7ap, 0x0);
-	mtebc (pb7cr, 0x0);
+	mtebc (PB4AP, 0x01805940);
+	mtebc (PB4CR, 0x7401a000);
+	mtebc (PB5AP, 0x01805940);
+	mtebc (PB5CR, 0x7401a000);
+	mtebc (PB6AP, 0x0);
+	mtebc (PB6CR, 0x0);
+	mtebc (PB7AP, 0x0);
+	mtebc (PB7CR, 0x0);
 	return 0;
 }
 
@@ -312,18 +312,18 @@ int board_early_init_f (void)
 	mtdcr (uicsr, 0xFFFFFFFF);    /* clear all ints */
 
 	/* setup other implementation specific details */
-	mtdcr (ecr, 0x60606000);
+	mtdcr (CPC0_ECR, 0x60606000);
 
-	mtdcr (cntrl1, 0x000042C0);
+	mtdcr (CPC0_CR1, 0x000042C0);
 
 	if (IS_CAMERON) {
-		mtdcr (cntrl0, 0x01380000);
+		mtdcr (CPC0_CR0, 0x01380000);
 		/* Setup the GPIOs */
 		writel (0x08008000, 0xEF600700);	/* Output states */
 		writel (0x00000000, 0xEF600718);	/* Open Drain control */
 		writel (0x68098000, 0xEF600704);	/* Output control */
 	} else {
-		mtdcr (cntrl0,0x00080000);
+		mtdcr (CPC0_CR0,0x00080000);
 		/* Setup the GPIOs */
 		writel (0x08000000, 0xEF600700);	/* Output states */
 		writel (0x14000000, 0xEF600718);	/* Open Drain control */
@@ -331,13 +331,13 @@ int board_early_init_f (void)
 	}
 
 	/* Code decompression disabled */
-	mtdcr (kiar, kconf);
-	mtdcr (kidr, 0x2B);
+	mtdcr (KIAR, KCONF);
+	mtdcr (KIDR, 0x2B);
 
 	/* CPC0_ER: enable sleep mode of (currently) unused components */
 	/* CPC0_FR: force unused components into sleep mode */
-	mtdcr (cpmer, 0x3F800000);
-	mtdcr (cpmfr, 0x14000000);
+	mtdcr (CPMER, 0x3F800000);
+	mtdcr (CPMFR, 0x14000000);
 
 	/* set PLB priority */
 	mtdcr (0x87, 0x08000000);
@@ -472,19 +472,19 @@ static void printCSConfig(int reg,unsigned long ap,unsigned long cr)
 
 #ifdef SC3_DEBUGOUT
 
-static unsigned int ap[] = {pb0ap, pb1ap, pb2ap, pb3ap, pb4ap,
-				pb5ap, pb6ap, pb7ap};
-static unsigned int cr[] = {pb0cr, pb1cr, pb2cr, pb3cr, pb4cr,
-				pb5cr, pb6cr, pb7cr};
+static unsigned int ap[] = {PB0AP, PB1AP, PB2AP, PB3AP, PB4AP,
+				PB5AP, PB6AP, PB7AP};
+static unsigned int cr[] = {PB0CR, PB1CR, PB2CR, PB3CR, PB4CR,
+				PB5CR, PB6CR, PB7CR};
 
 static int show_reg (int nr)
 {
 	unsigned long ul1, ul2;
 
-	mtdcr (ebccfga, ap[nr]);
-	ul1 = mfdcr (ebccfgd);
-	mtdcr (ebccfga, cr[nr]);
-	ul2 = mfdcr(ebccfgd);
+	mtdcr (EBC0_CFGADDR, ap[nr]);
+	ul1 = mfdcr (EBC0_CFGDATA);
+	mtdcr (EBC0_CFGADDR, cr[nr]);
+	ul2 = mfdcr(EBC0_CFGDATA);
 	printCSConfig(nr, ul1, ul2);
 	return 0;
 }
@@ -500,8 +500,8 @@ int checkboard (void)
 		show_reg (i);
 	}
 
-	mtdcr (ebccfga, epcr);
-	ul1 = mfdcr (ebccfgd);
+	mtdcr (EBC0_CFGADDR, EBC0_CFG);
+	ul1 = mfdcr (EBC0_CFGDATA);
 
 	puts ("\nGeneral configuration:\n");
 
@@ -591,21 +591,21 @@ phys_size_t initdram (int board_type)
 
 	puts("\nSDRAM configuration:\n");
 
-	mtdcr (memcfga, mem_mcopt1);
-	ul1 = mfdcr(memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+	ul1 = mfdcr(SDRAM0_CFGDATA);
 
 	if (!(ul1 & 0x80000000)) {
 		puts(" Controller disabled\n");
 		return 0;
 	}
 	for (i = 0; i < 4; i++) {
-		mtdcr (memcfga, mbcf[i]);
-		ul1 = mfdcr (memcfgd);
+		mtdcr (SDRAM0_CFGADDR, mbcf[i]);
+		ul1 = mfdcr (SDRAM0_CFGDATA);
 		mems += printSDRAMConfig (i, ul1);
 	}
 
-	mtdcr (memcfga, mem_sdtr1);
-	ul1 = mfdcr(memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+	ul1 = mfdcr(SDRAM0_CFGDATA);
 
 	printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1);
 	printf (" -Precharge %lu (PTA) \n", ((ul1 & 0xC0000) >> 18) + 1);
@@ -614,15 +614,15 @@ phys_size_t initdram (int board_type)
 	printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4);
 	printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1));
 	puts ("Misc:\n");
-	mtdcr (memcfga, mem_rtr);
-	ul1 = mfdcr(memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_rtr);
+	ul1 = mfdcr(SDRAM0_CFGDATA);
 	printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7);
 
-	mtdcr(memcfga,mem_pmit);
-	ul2=mfdcr(memcfgd);
+	mtdcr(SDRAM0_CFGADDR,mem_pmit);
+	ul2=mfdcr(SDRAM0_CFGDATA);
 
-	mtdcr(memcfga,mem_mcopt1);
-	ul1=mfdcr(memcfgd);
+	mtdcr(SDRAM0_CFGADDR,mem_mcopt1);
+	ul1=mfdcr(SDRAM0_CFGDATA);
 
 	if (ul1 & 0x20000000)
 		printf(" -Power Down after: %luns\n",
@@ -658,8 +658,8 @@ phys_size_t initdram (int board_type)
 	else
 		puts(" -Memory lines only at write cycles active outputs\n");
 
-	mtdcr (memcfga, mem_status);
-	ul1 = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_status);
+	ul1 = mfdcr (SDRAM0_CFGDATA);
 	if (ul1 & 0x80000000)
 		puts(" -SDRAM Controller ready\n");
 	else
@@ -670,20 +670,20 @@ phys_size_t initdram (int board_type)
 
 	return (mems * 1024 * 1024);
 #else
-	mtdcr (memcfga, mem_mb0cf);
-	ul1 = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+	ul1 = mfdcr (SDRAM0_CFGDATA);
 	mems = printSDRAMConfig (0, ul1);
 
-	mtdcr (memcfga, mem_mb1cf);
-	ul1 = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+	ul1 = mfdcr (SDRAM0_CFGDATA);
 	mems += printSDRAMConfig (1, ul1);
 
-	mtdcr (memcfga, mem_mb2cf);
-	ul1 = mfdcr(memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+	ul1 = mfdcr(SDRAM0_CFGDATA);
 	mems += printSDRAMConfig (2, ul1);
 
-	mtdcr (memcfga, mem_mb3cf);
-	ul1 = mfdcr(memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+	ul1 = mfdcr(SDRAM0_CFGDATA);
 	mems += printSDRAMConfig (3, ul1);
 
 	return (mems * 1024 * 1024);
diff --git a/board/snmc/qs850/flash.c b/board/snmc/qs850/flash.c
index 9e276a1..a26a679 100644
--- a/board/snmc/qs850/flash.c
+++ b/board/snmc/qs850/flash.c
@@ -104,21 +104,21 @@ unsigned long flash_init (void)
 
 	/* Re-do sizing to get full correct info */
 	if (size_b1) {
-		mtdcr(ebccfga, pb0cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb0cr);
+		mtdcr(EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr(EBC0_CFGDATA);
+		mtdcr(EBC0_CFGADDR, PB0CR);
 		base_b1 = -size_b1;
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
+		mtdcr(EBC0_CFGDATA, pbcr);
 	}
 
 	if (size_b0) {
-		mtdcr(ebccfga, pb1cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb1cr);
+		mtdcr(EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr(EBC0_CFGDATA);
+		mtdcr(EBC0_CFGADDR, PB1CR);
 		base_b0 = base_b1 - size_b0;
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
+		mtdcr(EBC0_CFGDATA, pbcr);
 	}
 
 	size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c
index 2cb8dcb..48c2258 100644
--- a/board/snmc/qs860t/flash.c
+++ b/board/snmc/qs860t/flash.c
@@ -102,21 +102,21 @@ unsigned long flash_init (void)
 
 		/* Re-do sizing to get full correct info */
 		if (size_b1) {
-			mtdcr(ebccfga, pb0cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb0cr);
+			mtdcr(EBC0_CFGADDR, PB0CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB0CR);
 			base_b1 = -size_b1;
 			pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-			mtdcr(ebccfgd, pbcr);
+			mtdcr(EBC0_CFGDATA, pbcr);
 		}
 
 		if (size_b0) {
-			mtdcr(ebccfga, pb1cr);
-			pbcr = mfdcr(ebccfgd);
-			mtdcr(ebccfga, pb1cr);
+			mtdcr(EBC0_CFGADDR, PB1CR);
+			pbcr = mfdcr(EBC0_CFGDATA);
+			mtdcr(EBC0_CFGADDR, PB1CR);
 			base_b0 = base_b1 - size_b0;
 			pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-			mtdcr(ebccfgd, pbcr);
+			mtdcr(EBC0_CFGDATA, pbcr);
 		}
 
 		size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
diff --git a/board/tb0229/flash.c b/board/tb0229/flash.c
index 933d5ec..1554642 100644
--- a/board/tb0229/flash.c
+++ b/board/tb0229/flash.c
@@ -108,25 +108,25 @@ unsigned long flash_init (void)
 		/* Re-do sizing to get full correct info */
 
 		if (size_b1) {
-			mtdcr (ebccfga, pb0cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb0cr);
+			mtdcr (EBC0_CFGADDR, PB0CR);
+			pbcr = mfdcr (EBC0_CFGDATA);
+			mtdcr (EBC0_CFGADDR, PB0CR);
 			base_b1 = -size_b1;
 			pbcr = (pbcr & 0x0001ffff) | base_b1 |
 				(((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*          printf("pb1cr = %x\n", pbcr); */
+			mtdcr (EBC0_CFGDATA, pbcr);
+			/*          printf("PB1CR = %x\n", pbcr); */
 		}
 
 		if (size_b0) {
-			mtdcr (ebccfga, pb1cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb1cr);
+			mtdcr (EBC0_CFGADDR, PB1CR);
+			pbcr = mfdcr (EBC0_CFGDATA);
+			mtdcr (EBC0_CFGADDR, PB1CR);
 			base_b0 = base_b1 - size_b0;
 			pbcr = (pbcr & 0x0001ffff) | base_b0 |
 				(((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*            printf("pb0cr = %x\n", pbcr); */
+			mtdcr (EBC0_CFGDATA, pbcr);
+			/*            printf("PB0CR = %x\n", pbcr); */
 		}
 
 		size_b0 =
diff --git a/board/w7o/init.S b/board/w7o/init.S
index 902c631..090b07a 100644
--- a/board/w7o/init.S
+++ b/board/w7o/init.S
@@ -87,48 +87,48 @@ ext_bus_cntlr_init:
 	/********************************************************************
 	 * Setup External Bus Controller (EBC).
 	 *******************************************************************/
-	addi	r3, 0, epcr
-	mtdcr	ebccfga, r3
+	addi	r3, 0, EBC0_CFG
+	mtdcr	EBC0_CFGADDR, r3
 	addis	r4, 0, 0xb040		/* Device base timeout = 1024 cycles */
 	ori	r4, r4, 0x0		/* Drive CS with external master */
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
 	/********************************************************************
 	 * Change PCIINT signal to PerWE
 	 *******************************************************************/
-	mfdcr	r4, cntrl1
+	mfdcr	r4, CPC0_CR1
 	ori	r4, r4, 0x4000
-	mtdcr	cntrl1, r4
+	mtdcr	CPC0_CR1, r4
 
 	/********************************************************************
 	 * Memory Bank 0 (Flash Bank 0) initialization
 	 *******************************************************************/
-	addi	r3, 0, pb0ap
-	mtdcr	ebccfga, r3
+	addi	r3, 0, PB1AP
+	mtdcr	EBC0_CFGADDR, r3
 	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h
 	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
-	addi	r3, 0, pb0cr
-	mtdcr	ebccfga, r3
+	addi	r3, 0, PB0CR
+	mtdcr	EBC0_CFGADDR, r3
 	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h
 	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
 	/********************************************************************
 	 * Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs.
 	 *******************************************************************/
-	addi	r3, 0, pb7ap
-	mtdcr	ebccfga, r3
+	addi	r3, 0, PB7AP
+	mtdcr	EBC0_CFGADDR, r3
 	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h
 	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
-	addi	r3, 0, pb7cr
-	mtdcr	ebccfga, r3
+	addi	r3, 0, PB7CR
+	mtdcr	EBC0_CFGADDR, r3
 	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h
 	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
 	/* We are all done */
 	mtlr	r0			/* Restore link register */
@@ -183,35 +183,35 @@ sdram_init:
 	 * values to be changed.
 	 */
 	addi    r3, 0, mem_mcopt1
-	mtdcr   memcfga, r3
+	mtdcr   SDRAM0_CFGADDR, r3
 	addis   r4, 0, 0x0
 	ori     r4, r4, 0x0
-	mtdcr   memcfgd, r4
+	mtdcr   SDRAM0_CFGDATA, r4
 
 	/*
 	 * Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
 	 * All other banks are disabled.
 	 */
 	addi	r3, 0, mem_mb0cf
-	mtdcr	memcfga, r3
+	mtdcr	SDRAM0_CFGADDR, r3
 	addis	r4, 0, 0x0000		/* BA=0x0, SZ=4MB */
 	ori	r4, r4, 0x8001		/* Mode is 5, 11x8x2or4, BE=Enabled */
-	mtdcr	memcfgd, r4
+	mtdcr	SDRAM0_CFGDATA, r4
 
 	/* Clear MB1CR,MB2CR,MB3CR to turn other banks off */
 	addi	r4, 0, 0		/* Zero the data reg */
 
 	addi	r3, r3, 4		/* Point to MB1CF reg */
-	mtdcr	memcfga, r3		/* Set the address */
-	mtdcr	memcfgd, r4		/* Zero the reg */
+	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
+	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
 
 	addi	r3, r3, 4		/* Point to MB2CF reg */
-	mtdcr	memcfga, r3		/* Set the address */
-	mtdcr	memcfgd, r4		/* Zero the reg */
+	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
+	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
 
 	addi	r3, r3, 4		/* Point to MB3CF reg */
-	mtdcr	memcfga, r3		/* Set the address */
-	mtdcr	memcfgd, r4		/* Zero the reg */
+	mtdcr	SDRAM0_CFGADDR, r3		/* Set the address */
+	mtdcr	SDRAM0_CFGDATA, r4		/* Zero the reg */
 
 	/********************************************************************
 	 * Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.
@@ -223,18 +223,18 @@ sdram_init:
 	 * Set up SDTR1
 	 */
 	addi    r3, 0, mem_sdtr1
-	mtdcr   memcfga, r3
+	mtdcr   SDRAM0_CFGADDR, r3
 	addis   r4, 0, 0x0086		/* SDTR1 value for 100Mhz */
 	ori     r4, r4, 0x400D
-	mtdcr   memcfgd, r4
+	mtdcr   SDRAM0_CFGDATA, r4
 
 	/*
 	 * Set RTR
 	 */
 	addi    r3, 0, mem_rtr
-	mtdcr   memcfga, r3
+	mtdcr   SDRAM0_CFGADDR, r3
 	addis   r4, 0, 0x05F0		/* RTR refresh val = 15.625ms@100Mhz */
-	mtdcr   memcfgd, r4
+	mtdcr   SDRAM0_CFGDATA, r4
 
 	/********************************************************************
 	 * Delay to ensure 200usec have elapsed since reset. Assume worst
@@ -251,10 +251,10 @@ sdram_init:
 	 * Set memory controller options reg, MCOPT1.
 	 *******************************************************************/
 	addi    r3, 0, mem_mcopt1
-	mtdcr   memcfga, r3
+	mtdcr   SDRAM0_CFGADDR, r3
 	addis   r4, 0, 0x80E0		/* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
 	ori     r4, r4, 0x0000		/* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
-	mtdcr   memcfgd, r4		/* EMDULR=1 */
+	mtdcr   SDRAM0_CFGDATA, r4		/* EMDULR=1 */
 
 ..sdri_done:
 	/* restore and return */
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
index 22cdfcd..6479bee 100644
--- a/board/w7o/w7o.c
+++ b/board/w7o/w7o.c
@@ -170,17 +170,17 @@ unsigned long get_dram_size (void)
 	int size = 0;
 
 	/* Get bank Size registers */
-	mtdcr (memcfga, mem_mb0cf);	/* get bank 0 config reg */
-	regs[0] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb0cf);	/* get bank 0 config reg */
+	regs[0] = mfdcr (SDRAM0_CFGDATA);
 
-	mtdcr (memcfga, mem_mb1cf);	/* get bank 1 config reg */
-	regs[1] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb1cf);	/* get bank 1 config reg */
+	regs[1] = mfdcr (SDRAM0_CFGDATA);
 
-	mtdcr (memcfga, mem_mb2cf);	/* get bank 2 config reg */
-	regs[2] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb2cf);	/* get bank 2 config reg */
+	regs[2] = mfdcr (SDRAM0_CFGDATA);
 
-	mtdcr (memcfga, mem_mb3cf);	/* get bank 3 config reg */
-	regs[3] = mfdcr (memcfgd);
+	mtdcr (SDRAM0_CFGADDR, mem_mb3cf);	/* get bank 3 config reg */
+	regs[3] = mfdcr (SDRAM0_CFGDATA);
 
 	/* compute the size, add each bank if enabled */
 	for (i = 0; i < 4; i++) {
diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c
index 4529b7e..58041fc 100644
--- a/board/xes/xpedite1000/xpedite1000.c
+++ b/board/xes/xpedite1000/xpedite1000.c
@@ -42,8 +42,8 @@ int board_early_init_f(void)
 	 * 23 = #LED_STATUS1
 	 * 24 = #LED_STATUS2
 	 */
-	mfsdr(sdr_pfc0, sdrreg);
-	mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
+	mfsdr(SDR0_PFC0, sdrreg);
+	mtsdr(SDR0_PFC0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
 	out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
 	LED0_OFF();
 	LED1_OFF();
@@ -51,14 +51,14 @@ int board_early_init_f(void)
 	LED3_OFF();
 
 	/* Setup the external bus controller/chip selects */
-	mtebc(pb0ap, 0x04055200);	/* 16MB Strata FLASH */
-	mtebc(pb0cr, 0xff098000);	/* BAS=0xff0 16MB R/W 8-bit */
-	mtebc(pb1ap, 0x04055200);	/* 512KB Socketed AMD FLASH */
-	mtebc(pb1cr, 0xfe018000);	/* BAS=0xfe0 1MB R/W 8-bit */
-	mtebc(pb6ap, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
-	mtebc(pb6cr, 0xf00da000);	/* BAS=0xf00 64MB R/W i6-bit */
-	mtebc(pb7ap, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
-	mtebc(pb7cr, 0xf40da000);	/* BAS=0xf40 64MB R/W 16-bit */
+	mtebc(PB0AP, 0x04055200);	/* 16MB Strata FLASH */
+	mtebc(PB0CR, 0xff098000);	/* BAS=0xff0 16MB R/W 8-bit */
+	mtebc(PB1AP, 0x04055200);	/* 512KB Socketed AMD FLASH */
+	mtebc(PB1CR, 0xfe018000);	/* BAS=0xfe0 1MB R/W 8-bit */
+	mtebc(PB6AP, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
+	mtebc(PB6CR, 0xf00da000);	/* BAS=0xf00 64MB R/W i6-bit */
+	mtebc(PB7AP, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
+	mtebc(PB7CR, 0xf40da000);	/* BAS=0xf40 64MB R/W 16-bit */
 
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -151,15 +151,15 @@ int pci_pre_init(struct pci_controller * hose)
 	unsigned long strap;
 
 	/* See if we're supposed to setup the pci */
-	mfsdr(sdr_sdstp1, strap);
+	mfsdr(SDR0_SDSTP1, strap);
 	if ((strap & 0x00010000) == 0)
 		return 0;
 
 #if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
 	/* Setup System Device Register PCIX0_XCR */
-	mfsdr(sdr_xcr, strap);
+	mfsdr(SDR0_XCR, strap);
 	strap &= 0x0f000000;
-	mtsdr(sdr_xcr, strap);
+	mtsdr(SDR0_XCR, strap);
 #endif
 
 	return 1;
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 9bc390f..fc9dfa0 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -61,7 +61,7 @@ int board_early_init_f(void)
 	/*
 	 * Configure CPC0_PCI to enable PerWE as output
 	 */
-	mtdcr(cpc0_pci, CPC0_PCI_SPE);
+	mtdcr(CPC0_PCI, CPC0_PCI_SPE);
 
 	return 0;
 }
@@ -107,7 +107,7 @@ int misc_init_r(void)
 	/* Re-do sizing to get full correct info */
 
 	/* adjust flash start and offset */
-	mfebc(pb0cr, pbcr);
+	mfebc(PB0CR, pbcr);
 	switch (gd->bd->bi_flashsize) {
 	case 1 << 20:
 		size_val = 0;
@@ -135,7 +135,7 @@ int misc_init_r(void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtebc(pb0cr, pbcr);
+	mtebc(PB0CR, pbcr);
 
 	/*
 	 * Re-check to get correct base address
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index abb9941..3ed1509 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -108,72 +108,72 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\nMemory (SDRAM) Configuration\n"
 	    "besra    besrsa   besrb    besrsb   bear     mcopt1   rtr      pmit\n");
 
-	mtdcr(memcfga,mem_besra);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_besrsa);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_besrb);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_besrsb);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_bear);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mcopt1);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_rtr);		printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_pmit);	printf ("%08x ", mfdcr(memcfgd));
+	mtdcr(SDRAM0_CFGADDR,mem_besra);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_besrsa);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_besrb);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_besrsb);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_bear);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mcopt1);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_rtr);		printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_pmit);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
 
 	puts ("\n"
 	    "mb0cf    mb1cf    mb2cf    mb3cf    sdtr1    ecccf    eccerr\n");
-	mtdcr(memcfga,mem_mb0cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mb1cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mb2cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mb3cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_sdtr1);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_ecccf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_eccerr);	printf ("%08x ", mfdcr(memcfgd));
+	mtdcr(SDRAM0_CFGADDR,mem_mb0cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mb1cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mb2cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mb3cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_sdtr1);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_ecccf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_eccerr);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
 
 	printf ("\n\n"
 	    "DMA Channels\n"
-	    "dmasr    dmasgc   dmaadr\n"
+	    "DMASR    DMASGC   DMAADR\n"
 	    "%08x %08x %08x\n"
 	    "dmacr_0  dmact_0  dmada_0  dmasa_0  dmasb_0\n"
 	    "%08x %08x %08x %08x %08x\n"
 	    "dmacr_1  dmact_1  dmada_1  dmasa_1  dmasb_1\n"
 	    "%08x %08x %08x %08x %08x\n",
-	mfdcr(dmasr),  mfdcr(dmasgc),mfdcr(dmaadr),
-	mfdcr(dmacr0), mfdcr(dmact0),mfdcr(dmada0), mfdcr(dmasa0), mfdcr(dmasb0),
-	mfdcr(dmacr1), mfdcr(dmact1),mfdcr(dmada1), mfdcr(dmasa1), mfdcr(dmasb1));
+	mfdcr(DMASR),  mfdcr(DMASGC),mfdcr(DMAADR),
+	mfdcr(DMACR0), mfdcr(DMACT0),mfdcr(DMADA0), mfdcr(DMASA0), mfdcr(DMASB0),
+	mfdcr(DMACR1), mfdcr(DMACT1),mfdcr(DMADA1), mfdcr(DMASA1), mfdcr(DMASB1));
 
 	printf (
 	    "dmacr_2  dmact_2  dmada_2  dmasa_2  dmasb_2\n"	"%08x %08x %08x %08x %08x\n"
 	    "dmacr_3  dmact_3  dmada_3  dmasa_3  dmasb_3\n"	"%08x %08x %08x %08x %08x\n",
-	mfdcr(dmacr2), mfdcr(dmact2),mfdcr(dmada2), mfdcr(dmasa2), mfdcr(dmasb2),
-	mfdcr(dmacr3), mfdcr(dmact3),mfdcr(dmada3), mfdcr(dmasa3), mfdcr(dmasb3) );
+	mfdcr(DMACR2), mfdcr(DMACT2),mfdcr(DMADA2), mfdcr(DMASA2), mfdcr(DMASB2),
+	mfdcr(DMACR3), mfdcr(DMACT3),mfdcr(DMADA3), mfdcr(DMASA3), mfdcr(DMASB3) );
 
 	puts ("\n"
 	    "External Bus\n"
-	    "pbear    pbesr0   pbesr1   epcr\n");
-	mtdcr(ebccfga,pbear);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pbesr0);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pbesr1);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,epcr);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PBEAR    PBESR0   PBESR1   EBC0_CFG\n");
+	mtdcr(EBC0_CFGADDR,PBEAR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PBESR0);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PBESR1);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,EBC0_CFG);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n"
-	    "pb0cr    pb0ap    pb1cr    pb1ap    pb2cr    pb2ap    pb3cr    pb3ap\n");
-	mtdcr(ebccfga,pb0cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb0ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb1cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb1ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb2cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb2ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb3cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb3ap);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PB0CR    PB0AP    PB1CR    PB1AP    PB2CR    PB2AP    PB3CR    PB3AP\n");
+	mtdcr(EBC0_CFGADDR,PB0CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB0AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB1CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB1AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB2CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB2AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB3CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB3AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n"
-	    "pb4cr    pb4ap    pb5cr    bp5ap    pb6cr    pb6ap    pb7cr    pb7ap\n");
-	mtdcr(ebccfga,pb4cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb4ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb5cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb5ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb6cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb6ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb7cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb7ap);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PB4CR    PB4AP    PB5CR    bp5ap    PB6CR    PB6AP    PB7CR    PB7AP\n");
+	mtdcr(EBC0_CFGADDR,PB4CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB4AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB5CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB5AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB6CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB6AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB7CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB7AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n\n");
 
@@ -195,51 +195,51 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\nMemory (SDRAM) Configuration\n"
 	    "mcopt1   rtr      pmit     mb0cf    mb1cf    sdtr1\n");
 
-	mtdcr(memcfga,mem_mcopt1);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_rtr);		printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_pmit);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mb0cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_mb1cf);	printf ("%08x ", mfdcr(memcfgd));
-	mtdcr(memcfga,mem_sdtr1);	printf ("%08x ", mfdcr(memcfgd));
+	mtdcr(SDRAM0_CFGADDR,mem_mcopt1);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_rtr);		printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_pmit);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mb0cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_mb1cf);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+	mtdcr(SDRAM0_CFGADDR,mem_sdtr1);	printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
 
 	printf ("\n\n"
 	    "DMA Channels\n"
-	    "dmasr    dmasgc   dmaadr\n"			"%08x %08x %08x\n"
+	    "DMASR    DMASGC   DMAADR\n"			"%08x %08x %08x\n"
 	    "dmacr_0  dmact_0  dmada_0  dmasa_0  dmasb_0\n"	"%08x %08x %08x %08x %08x\n"
 	    "dmacr_1  dmact_1  dmada_1  dmasa_1  dmasb_1\n"	"%08x %08x %08x %08x %08x\n",
-	mfdcr(dmasr),  mfdcr(dmasgc),mfdcr(dmaadr),
-	mfdcr(dmacr0), mfdcr(dmact0),mfdcr(dmada0), mfdcr(dmasa0), mfdcr(dmasb0),
-	mfdcr(dmacr1), mfdcr(dmact1),mfdcr(dmada1), mfdcr(dmasa1), mfdcr(dmasb1));
+	mfdcr(DMASR),  mfdcr(DMASGC),mfdcr(DMAADR),
+	mfdcr(DMACR0), mfdcr(DMACT0),mfdcr(DMADA0), mfdcr(DMASA0), mfdcr(DMASB0),
+	mfdcr(DMACR1), mfdcr(DMACT1),mfdcr(DMADA1), mfdcr(DMASA1), mfdcr(DMASB1));
 
 	printf (
 	    "dmacr_2  dmact_2  dmada_2  dmasa_2  dmasb_2\n"	"%08x %08x %08x %08x %08x\n"
 	    "dmacr_3  dmact_3  dmada_3  dmasa_3  dmasb_3\n"	"%08x %08x %08x %08x %08x\n",
-	mfdcr(dmacr2), mfdcr(dmact2),mfdcr(dmada2), mfdcr(dmasa2), mfdcr(dmasb2),
-	mfdcr(dmacr3), mfdcr(dmact3),mfdcr(dmada3), mfdcr(dmasa3), mfdcr(dmasb3) );
+	mfdcr(DMACR2), mfdcr(DMACT2),mfdcr(DMADA2), mfdcr(DMASA2), mfdcr(DMASB2),
+	mfdcr(DMACR3), mfdcr(DMACT3),mfdcr(DMADA3), mfdcr(DMASA3), mfdcr(DMASB3) );
 
 	puts ("\n"
 	    "External Bus\n"
-	    "pbear    pbesr0   pbesr1   epcr\n");
-	mtdcr(ebccfga,pbear);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pbesr0);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pbesr1);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,epcr);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PBEAR    PBESR0   PBESR1   EBC0_CFG\n");
+	mtdcr(EBC0_CFGADDR,PBEAR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PBESR0);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PBESR1);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,EBC0_CFG);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n"
-	    "pb0cr    pb0ap    pb1cr    pb1ap    pb2cr    pb2ap    pb3cr    pb3ap\n");
-	mtdcr(ebccfga,pb0cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb0ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb1cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb1ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb2cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb2ap);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb3cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb3ap);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PB0CR    PB0AP    PB1CR    PB1AP    PB2CR    PB2AP    PB3CR    PB3AP\n");
+	mtdcr(EBC0_CFGADDR,PB0CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB0AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB1CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB1AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB2CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB2AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB3CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB3AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n"
-	    "pb4cr    pb4ap\n");
-	mtdcr(ebccfga,pb4cr);	printf ("%08x ", mfdcr(ebccfgd));
-	mtdcr(ebccfga,pb4ap);	printf ("%08x ", mfdcr(ebccfgd));
+	    "PB4CR    PB4AP\n");
+	mtdcr(EBC0_CFGADDR,PB4CR);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
+	mtdcr(EBC0_CFGADDR,PB4AP);	printf ("%08x ", mfdcr(EBC0_CFGDATA));
 
 	puts ("\n\n");
 #elif defined(CONFIG_5xx)
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
index 75bd70d..83fa709 100644
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -422,7 +422,7 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 * program all the registers.
 	 * -------------------------------------------------------------------*/
 
-#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+#define mtsdram0(reg, data)  mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data)
 	/* disable memcontroller so updates work */
 	mtsdram0( mem_mcopt1, 0 );
 
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index f26fcda..c93f23a 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -192,8 +192,8 @@ long int spd_sdram(void) {
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
-	mtsdr(sdr_srst, SDR0_SRST_DMC);
-	mtsdr(sdr_srst, 0x00000000);
+	mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+	mtsdr(SDR0_SRST, 0x00000000);
 #endif
 
 	/*
@@ -848,11 +848,11 @@ static int short_mem_test(void)
 		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
 
 	for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
-		mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
-		if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+		mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bxcr_num << 2));
+		if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
 			/* Bank is enabled */
 			membase = (unsigned long*)
-				(mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+				(mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
 
 			/*
 			 * Run the short memory test
@@ -1086,8 +1086,8 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 	 * Set the BxCR regs.  First, wipe out the bank config registers.
 	 */
 	for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
-		mtdcr(memcfga, mem_b0cr + (bx_cr_num << 2));
-		mtdcr(memcfgd, 0x00000000);
+		mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bx_cr_num << 2));
+		mtdcr(SDRAM0_CFGDATA, 0x00000000);
 		bank_parms[bx_cr_num].bank_size_bytes = 0;
 	}
 
@@ -1232,12 +1232,12 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 	/* Set the SDRAM0_BxCR regs thanks to sort tables */
 	for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
 		if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
-			mtdcr(memcfga, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
-			temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
+			mtdcr(SDRAM0_CFGADDR, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
+			temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
 						  SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
 			temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
 				bank_parms[sorted_bank_num[bx_cr_num]].cr;
-			mtdcr(memcfgd, temp);
+			mtdcr(SDRAM0_CFGDATA, temp);
 			bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
 			debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
 		}
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 184cef5..e97f32c 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -100,7 +100,7 @@ int __pci_pre_init(struct pci_controller *hose)
 	 * The arbiter is enabled in this place because of
 	 * compatibility reasons.
 	 */
-	mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN);
+	mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
 #endif /* CONFIG_405EP */
 
 	return 1;
@@ -118,10 +118,10 @@ ushort pmc405_pci_subsys_deviceid(void);
 int __is_pci_host(struct pci_controller *hose)
 {
 #if defined(CONFIG_405GP)
-	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
 		return 1;
 #elif defined (CONFIG_405EP)
-	if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+	if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
 		return 1;
 #endif
 	return 0;
@@ -491,7 +491,7 @@ int pci_440_init (struct pci_controller *hose)
 #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	unsigned long strap;
 
-	mfsdr(sdr_sdstp1,strap);
+	mfsdr(SDR0_SDSTP1,strap);
 	if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
 		printf("PCI: SDR0_STRP1[PISE] not set.\n");
 		printf("PCI: Configuration aborted.\n");
@@ -500,7 +500,7 @@ int pci_440_init (struct pci_controller *hose)
 #elif defined(CONFIG_440GP)
 	unsigned long strap;
 
-	strap = mfdcr(cpc0_strp1);
+	strap = mfdcr(CPC0_STRP1);
 	if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
 		printf("PCI: CPC0_STRP1[PISE] not set.\n");
 		printf("PCI: Configuration aborted.\n");
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
index 0780624..8de6542 100644
--- a/cpu/ppc4xx/4xx_uart.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -90,7 +90,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CR0_EXTCLK_ENA  0x00600000
 #define CR0_UDIV_POS    16
 #define UDIV_SUBTRACT	1
-#define UART0_SDR	cntrl0
+#define UART0_SDR	CPC0_CR0
 #define MFREG(a, d)	d = mfdcr(a)
 #define MTREG(a, d)	mtdcr(a, d)
 #else /* #if defined(CONFIG_440GP) */
@@ -99,18 +99,18 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CR0_EXTCLK_ENA  0x00800000
 #define CR0_UDIV_POS    0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_SDR	sdr_uart2
+#define UART2_SDR	SDR0_UART2
 #endif
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART3_SDR	sdr_uart3
+#define UART3_SDR	SDR0_UART3
 #endif
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
@@ -130,8 +130,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CR0_EXTCLK_ENA	0x00800000
 #define CR0_UDIV_POS	0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #else /* CONFIG_405GP || CONFIG_405CR */
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
@@ -282,7 +282,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 	u32 reg;
 
 	/* check the pll feedback source */
-	mfcpr(cprpllc, cpr_pllc);
+	mfcpr(CPR0_PLLC, cpr_pllc);
 
 	get_sys_info(&sysinfo);
 
@@ -312,10 +312,10 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 	}
 
 	*pudiv = udiv;
-	mfcpr(cprperd0, reg);
+	mfcpr(CPC0_PERD0, reg);
 	reg &= ~0x0000ffff;
 	reg |= ((udiv - 0) << 8) | (udiv - 0);
-	mtcpr(cprperd0, reg);
+	mtcpr(CPC0_PERD0, reg);
 	*pbdiv = div / udiv;
 }
 #endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
@@ -412,7 +412,7 @@ int serial_init_dev (unsigned long base)
 	clk = tmp = reg = 0;
 #else
 #ifdef CONFIG_405EP
-	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+	reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
 	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
@@ -420,9 +420,9 @@ int serial_init_dev (unsigned long base)
 		udiv = UDIV_MAX;
 	reg |= (udiv) << UCR0_UDIV_POS;	        /* set the UART divisor */
 	reg |= (udiv) << UCR1_UDIV_POS;	        /* set the UART divisor */
-	mtdcr (cpc0_ucr, reg);
+	mtdcr (CPC0_UCR, reg);
 #else /* CONFIG_405EP */
-	reg = mfdcr(cntrl0) & ~CR0_MASK;
+	reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
 #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 	udiv = 1;
@@ -439,7 +439,7 @@ int serial_init_dev (unsigned long base)
 #endif
 #endif
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
-	mtdcr (cntrl0, reg);
+	mtdcr (CPC0_CR0, reg);
 #endif /* CONFIG_405EP */
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index e9861ab..2287904 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -64,7 +64,7 @@ int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
 static int pci_async_enabled(void)
 {
 #if defined(CONFIG_405GP)
-	return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
+	return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
 #endif
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
@@ -72,7 +72,7 @@ static int pci_async_enabled(void)
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
 	unsigned long val;
 
-	mfsdr(sdr_sdstp1, val);
+	mfsdr(SDR0_SDSTP1, val);
 	return (val & SDR0_SDSTP1_PAME_MASK);
 #endif
 }
@@ -84,21 +84,21 @@ static int pci_async_enabled(void)
 static int pci_arbiter_enabled(void)
 {
 #if defined(CONFIG_405GP)
-	return (mfdcr(strap) & PSR_PCI_ARBIT_EN);
+	return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
 #endif
 
 #if defined(CONFIG_405EP)
-	return (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN);
+	return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
 #endif
 
 #if defined(CONFIG_440GP)
-	return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
+	return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
 #endif
 
 #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	unsigned long val;
 
-	mfsdr(sdr_xcr, val);
+	mfsdr(SDR0_XCR, val);
 	return (val & 0x80000000);
 #endif
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
@@ -106,7 +106,7 @@ static int pci_arbiter_enabled(void)
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
 	unsigned long val;
 
-	mfsdr(sdr_pci0, val);
+	mfsdr(SDR0_PCI0, val);
 	return (val & 0x80000000);
 #endif
 }
@@ -118,11 +118,11 @@ static int pci_arbiter_enabled(void)
 static int i2c_bootrom_enabled(void)
 {
 #if defined(CONFIG_405EP)
-	return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
+	return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
 #else
 	unsigned long val;
 
-	mfsdr(sdr_sdcs, val);
+	mfsdr(SDR0_SDCS0, val);
 	return (val & SDR0_SDCS_SDD);
 #endif
 }
@@ -256,7 +256,7 @@ static int bootstrap_option(void)
 {
 	unsigned long val;
 
-	mfsdr(SDR_PINSTP, val);
+	mfsdr(SDR0_PINSTP, val);
 	return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
 }
 #endif /* SDR0_PINSTP_SHIFT */
@@ -265,13 +265,13 @@ static int bootstrap_option(void)
 #if defined(CONFIG_440)
 static int do_chip_reset (unsigned long sys0, unsigned long sys1)
 {
-	/* Changes to cpc0_sys0 and cpc0_sys1 require chip
+	/* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
 	 * reset.
 	 */
-	mtdcr (cntrl0, mfdcr (cntrl0) | 0x80000000);	/* Set SWE */
-	mtdcr (cpc0_sys0, sys0);
-	mtdcr (cpc0_sys1, sys1);
-	mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000);	/* Clr SWE */
+	mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000);	/* Set SWE */
+	mtdcr (CPC0_SYS0, sys0);
+	mtdcr (CPC0_SYS1, sys1);
+	mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000);	/* Clr SWE */
 	mtspr (SPRN_DBCR0, 0x20000000);	/* Reset the chip */
 
 	return 1;
@@ -410,13 +410,13 @@ int checkcpu (void)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
 		/* See errata 1.12: CHIP_4 */
-		if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) ||
-		    (mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){
+		if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
+		    (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
 			puts (  "\n\t CPC0_SYSx DCRs corrupted. "
 				"Resetting chip ...\n");
 			udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
-			do_chip_reset ( mfdcr(cpc0_strp0),
-					mfdcr(cpc0_strp1) );
+			do_chip_reset ( mfdcr(CPC0_STRP0),
+					mfdcr(CPC0_STRP1) );
 		}
 		break;
 
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 65092fb..bd06b9b 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -58,17 +58,17 @@ void reconfigure_pll(u32 new_cpu_freq)
 		target_perdv0 = 4;
 		target_spcid0 = 4;
 
-		mfcpr(clk_primbd, reg);
+		mfcpr(CPR0_PRIMBD, reg);
 		temp = (reg & PRBDV_MASK) >> 24;
 		prbdv0 = temp ? temp : 8;
 		if (prbdv0 != target_prbdv0) {
 			reg &= ~PRBDV_MASK;
 			reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
-			mtcpr(clk_primbd, reg);
+			mtcpr(CPR0_PRIMBD, reg);
 			reset_needed = 1;
 		}
 
-		mfcpr(clk_plld, reg);
+		mfcpr(CPR0_PLLD, reg);
 
 		temp = (reg & PLLD_FWDVA_MASK) >> 16;
 		fwdva = temp ? temp : 16;
@@ -89,35 +89,35 @@ void reconfigure_pll(u32 new_cpu_freq)
 				((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
 				((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
 				(target_lfbdv == 64 ? 0 : target_lfbdv);
-			mtcpr(clk_plld, reg);
+			mtcpr(CPR0_PLLD, reg);
 			reset_needed = 1;
 		}
 
-		mfcpr(clk_perd, reg);
+		mfcpr(CPR0_PERD, reg);
 		perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
 		if (perdv0 != target_perdv0) {
 			reg &= ~CPR0_PERD_PERDV0_MASK;
 			reg |= (target_perdv0 << 24);
-			mtcpr(clk_perd, reg);
+			mtcpr(CPR0_PERD, reg);
 			reset_needed = 1;
 		}
 
-		mfcpr(clk_spcid, reg);
+		mfcpr(CPR0_SPCID, reg);
 		temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
 		spcid0 = temp ? temp : 4;
 		if (spcid0 != target_spcid0) {
 			reg &= ~CPR0_SPCID_SPCIDV0_MASK;
 			reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
-			mtcpr(clk_spcid, reg);
+			mtcpr(CPR0_SPCID, reg);
 			reset_needed = 1;
 		}
 
 		/* Set reload inhibit so configuration will persist across
 		 * processor resets */
-		mfcpr(clk_icfg, reg);
+		mfcpr(CPR0_ICFG, reg);
 		reg &= ~CPR0_ICFG_RLI_MASK;
 		reg |= 1 << 31;
-		mtcpr(clk_icfg, reg);
+		mtcpr(CPR0_ICFG, reg);
 	}
 
 	/* Reset processor if configuration changed */
@@ -173,7 +173,7 @@ cpu_init_f (void)
 	/*
 	 * Set EMAC noise filter bits
 	 */
-	mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+	mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
 #endif /* CONFIG_405EP */
 
 #if defined(CONFIG_SYS_4xx_GPIO_TABLE)
@@ -204,43 +204,43 @@ cpu_init_f (void)
 	asm volatile("2:	bdnz	2b"		::: "ctr", "cr0");
 #endif
 
-	mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
-	mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
+	mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
+	mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
-	mtebc(pb1ap, CONFIG_SYS_EBC_PB1AP);
-	mtebc(pb1cr, CONFIG_SYS_EBC_PB1CR);
+	mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
+	mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
-	mtebc(pb2ap, CONFIG_SYS_EBC_PB2AP);
-	mtebc(pb2cr, CONFIG_SYS_EBC_PB2CR);
+	mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
+	mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
-	mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);
-	mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
+	mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
+	mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
-	mtebc(pb4ap, CONFIG_SYS_EBC_PB4AP);
-	mtebc(pb4cr, CONFIG_SYS_EBC_PB4CR);
+	mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
+	mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
-	mtebc(pb5ap, CONFIG_SYS_EBC_PB5AP);
-	mtebc(pb5cr, CONFIG_SYS_EBC_PB5CR);
+	mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
+	mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
-	mtebc(pb6ap, CONFIG_SYS_EBC_PB6AP);
-	mtebc(pb6cr, CONFIG_SYS_EBC_PB6CR);
+	mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
+	mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
 #endif
 
 #if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
-	mtebc(pb7ap, CONFIG_SYS_EBC_PB7AP);
-	mtebc(pb7cr, CONFIG_SYS_EBC_PB7CR);
+	mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
+	mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
 #endif
 
 #if defined (CONFIG_SYS_EBC_CFG)
@@ -276,9 +276,9 @@ cpu_init_f (void)
 	 *       Compatibility mode and Ethernet Clock select are not
 	 *       correct in the manual
 	 */
-	mfsdr(sdr_mfr, val);
+	mfsdr(SDR0_MFR, val);
 	val &= ~0x10000000;
-	mtsdr(sdr_mfr,val);
+	mtsdr(SDR0_MFR,val);
 #endif /* CONFIG_440GX */
 
 #if defined(CONFIG_460EX)
@@ -304,10 +304,10 @@ cpu_init_f (void)
 	/*
 	 * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
 	 */
-	mtdcr(plb0_acr, (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) |
-	      plb0_acr_rdp_4deep);
-	mtdcr(plb1_acr, (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) |
-	      plb1_acr_rdp_4deep);
+	mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
+	      PLB0_ACR_RDP_4DEEP);
+	mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
+	      PLB1_ACR_RDP_4DEEP);
 #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
 }
 
@@ -324,7 +324,7 @@ int cpu_init_r (void)
 	 * for compatibility to existing PPC405GP designs.
 	 */
 	if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
-		mtdcr(ecr, 0x60606000);
+		mtdcr(CPC0_ECR, 0x60606000);
 	}
 #endif  /* defined(CONFIG_405GP) */
 
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index ba5c120..496e028 100644
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -51,8 +51,8 @@ void __ft_board_setup(void *blob, bd_t *bd)
 	 * peripheral banks into the OPB/PLB address space
 	 */
 	for (i = 0; i < EBC_NUM_BANKS; i++) {
-		mtdcr(ebccfga, EBC_BXCR(i));
-		bxcr = mfdcr(ebccfgd);
+		mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
+		bxcr = mfdcr(EBC0_CFGDATA);
 
 		if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
 			*p++ = i;
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 4365df9..5a3336e 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -375,8 +375,8 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
-	mtsdr(sdr_srst, SDR0_SRST_DMC);
-	mtsdr(sdr_srst, 0x00000000);
+	mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+	mtsdr(SDR0_SRST, 0x00000000);
 #endif
 
 	for (i=0; i<N_MB0CF; i++) {
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index c0a5824..1f75137 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -50,12 +50,12 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 	/*
 	 * Read PLL Mode register
 	 */
-	pllmr = mfdcr (pllmd);
+	pllmr = mfdcr (CPC0_PLLMR);
 
 	/*
 	 * Read Pin Strapping register
 	 */
-	psr = mfdcr (strap);
+	psr = mfdcr (CPC0_PSR);
 
 	/*
 	 * Determine FWD_DIV.
@@ -280,8 +280,8 @@ void get_sys_info (sys_info_t * sysInfo)
 	unsigned long plbedv0;
 
 	/* Extract configured divisors */
-	mfsdr(sdr_sdstp0, strp0);
-	mfsdr(sdr_sdstp1, strp1);
+	mfsdr(SDR0_SDSTP0, strp0);
+	mfsdr(SDR0_SDSTP1, strp1);
 
 	temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
 	sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
@@ -342,7 +342,7 @@ void get_sys_info (sys_info_t *sysInfo)
 	*/
 
 	/* Decode CPR0_PLLD0 for divisors */
-	mfcpr(clk_plld, reg);
+	mfcpr(CPR0_PLLD, reg);
 	temp = (reg & PLLD_FWDVA_MASK) >> 16;
 	sysInfo->pllFwdDivA = temp ? temp : 16;
 	temp = (reg & PLLD_FWDVB_MASK) >> 8;
@@ -351,28 +351,28 @@ void get_sys_info (sys_info_t *sysInfo)
 	sysInfo->pllFbkDiv = temp ? temp : 32;
 	lfdiv = reg & PLLD_LFBDV_MASK;
 
-	mfcpr(clk_opbd, reg);
+	mfcpr(CPR0_OPBD, reg);
 	temp = (reg & OPBDDV_MASK) >> 24;
 	sysInfo->pllOpbDiv = temp ? temp : 4;
 
-	mfcpr(clk_perd, reg);
+	mfcpr(CPR0_PERD, reg);
 	temp = (reg & PERDV_MASK) >> 24;
 	sysInfo->pllExtBusDiv = temp ? temp : 8;
 
-	mfcpr(clk_primbd, reg);
+	mfcpr(CPR0_PRIMBD, reg);
 	temp = (reg & PRBDV_MASK) >> 24;
 	prbdv0 = temp ? temp : 8;
 
-	mfcpr(clk_spcid, reg);
+	mfcpr(CPR0_SPCID, reg);
 	temp = (reg & SPCID_MASK) >> 24;
 	sysInfo->pllPciDiv = temp ? temp : 4;
 
 	/* Calculate 'M' based on feedback source */
-	mfsdr(sdr_sdstp0, reg);
+	mfsdr(SDR0_SDSTP0, reg);
 	temp = (reg & PLLSYS0_SEL_MASK) >> 27;
 	if (temp == 0) { /* PLL output */
 		/* Figure which pll to use */
-		mfcpr(clk_pllc, reg);
+		mfcpr(CPR0_PLLC, reg);
 		temp = (reg & PLLC_SRC_MASK) >> 29;
 		if (!temp) /* PLLOUTA */
 			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
@@ -426,7 +426,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	unsigned long m;
 
 	/* Extract configured divisors */
-	strp0 = mfdcr( cpc0_strp0 );
+	strp0 = mfdcr( CPC0_STRP0 );
 	sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
 	sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
 	temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
@@ -484,8 +484,8 @@ void get_sys_info (sys_info_t * sysInfo)
 #endif
 
 	/* Extract configured divisors */
-	mfsdr( sdr_sdstp0,strp0 );
-	mfsdr( sdr_sdstp1,strp1 );
+	mfsdr( SDR0_SDSTP0,strp0 );
+	mfsdr( SDR0_SDSTP1,strp1 );
 
 	temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
 	sysInfo->pllFwdDivA = temp ? temp : 16 ;
@@ -531,7 +531,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	/* Determine PCI Clock Period */
 	pci_clock_per = determine_pci_clock_per();
 	sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
-	mfsdr(sdr_ddr0, sdr_ddrpll);
+	mfsdr(SDR0_DDR0, sdr_ddrpll);
 	sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
 #endif
 
@@ -794,8 +794,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 	/*
 	 * Read PLL Mode registers
 	 */
-	pllmr0 = mfdcr (cpc0_pllmr0);
-	pllmr1 = mfdcr (cpc0_pllmr1);
+	pllmr0 = mfdcr (CPC0_PLLMR0);
+	pllmr1 = mfdcr (CPC0_PLLMR1);
 
 	/*
 	 * Determine forward divider A
@@ -918,8 +918,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 	/*
 	 * Read PLL Mode registers
 	 */
-	mfcpr(cprplld, cpr_plld);
-	mfcpr(cprpllc, cpr_pllc);
+	mfcpr(CPR0_PLLD, cpr_plld);
+	mfcpr(CPR0_PLLC, cpr_pllc);
 
 	/*
 	 * Determine forward divider A
@@ -943,7 +943,7 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 	/*
 	 * Read CPR_PRIMAD register
 	 */
-	mfcpr(cprprimad, cpr_primad);
+	mfcpr(CPC0_PRIMAD, cpr_primad);
 
 	/*
 	 * Determine PLB_DIV.
@@ -1074,7 +1074,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	};
 	unsigned char sel, cpudv0, plb2xDiv;
 
-	mfcpr(cpr0_plld, tmp);
+	mfcpr(CPR0_PLLD, tmp);
 
 	/*
 	 * Determine forward divider A
@@ -1094,29 +1094,29 @@ void get_sys_info (sys_info_t * sysInfo)
 	/*
 	 * Determine PERDV0
 	 */
-	mfcpr(cpr0_perd, tmp);
+	mfcpr(CPR0_PERD, tmp);
 	tmp = (tmp >> 24) & 0x03;
 	sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
 
 	/*
 	 * Determine OPBDV0
 	 */
-	mfcpr(cpr0_opbd, tmp);
+	mfcpr(CPR0_OPBD, tmp);
 	tmp = (tmp >> 24) & 0x03;
 	sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
 
 	/* Determine PLB2XDV0 */
-	mfcpr(cpr0_plbd, tmp);
+	mfcpr(CPR0_PLBD, tmp);
 	tmp = (tmp >> 16) & 0x07;
 	plb2xDiv = (tmp == 0) ? 8 : tmp;
 
 	/* Determine CPUDV0 */
-	mfcpr(cpr0_cpud, tmp);
+	mfcpr(CPR0_CPUD, tmp);
 	tmp = (tmp >> 24) & 0x07;
 	cpudv0 = (tmp == 0) ? 8 : tmp;
 
 	/* Determine SEL(5:7) in CPR0_PLLC */
-	mfcpr(cpr0_pllc, tmp);
+	mfcpr(CPR0_PLLC, tmp);
 	sel = (tmp >> 24) & 0x07;
 
 	/*
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index f967d84..287a912 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -83,64 +83,64 @@
 
 #ifdef CONFIG_SYS_INIT_DCACHE_CS
 # if (CONFIG_SYS_INIT_DCACHE_CS == 0)
-#  define PBxAP pb0ap
-#  define PBxCR pb0cr
+#  define PBxAP PB1AP
+#  define PBxCR PB0CR
 #  if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 1)
-#  define PBxAP pb1ap
-#  define PBxCR pb1cr
+#  define PBxAP PB1AP
+#  define PBxCR PB1CR
 #  if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 2)
-#  define PBxAP pb2ap
-#  define PBxCR pb2cr
+#  define PBxAP PB2AP
+#  define PBxCR PB2CR
 #  if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 3)
-#  define PBxAP pb3ap
-#  define PBxCR pb3cr
+#  define PBxAP PB3AP
+#  define PBxCR PB3CR
 #  if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 4)
-#  define PBxAP pb4ap
-#  define PBxCR pb4cr
+#  define PBxAP PB4AP
+#  define PBxCR PB4CR
 #  if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 5)
-#  define PBxAP pb5ap
-#  define PBxCR pb5cr
+#  define PBxAP PB5AP
+#  define PBxCR PB5CR
 #  if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 6)
-#  define PBxAP pb6ap
-#  define PBxCR pb6cr
+#  define PBxAP PB6AP
+#  define PBxCR PB6CR
 #  if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
 #  endif
 # endif
 # if (CONFIG_SYS_INIT_DCACHE_CS == 7)
-#  define PBxAP pb7ap
-#  define PBxCR pb7cr
+#  define PBxAP PB7AP
+#  define PBxCR PB7CR
 #  if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
 #   define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
 #   define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
@@ -998,7 +998,7 @@ _start:
 	/*----------------------------------------------------------------------- */
 	addis	r3,r0, 0xFFFF		/* Clear all existing DMA status */
 	ori	r3,r3, 0xFFFF
-	mtdcr	dmasr, r3
+	mtdcr	DMASR, r3
 
 	bl	ppc405ep_init		/* do ppc405ep specific init */
 #endif /* CONFIG_405EP */
@@ -1015,21 +1015,21 @@ _start:
 	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
 	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
-	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
+	mtdcr	OCM0_PLBCR1,r3		/* Set PLB Access */
 	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
-	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
+	mtdcr	OCM0_PLBCR2,r3		/* Set PLB Access */
 	isync
 
 	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
 	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
-	mtdcr	ocmdscr1, r3		/* Set Data Side */
-	mtdcr	ocmiscr1, r3		/* Set Instruction Side */
+	mtdcr	OCM0_DSRC1, r3		/* Set Data Side */
+	mtdcr	OCM0_ISRC1, r3		/* Set Instruction Side */
 	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
-	mtdcr	ocmdscr2, r3		/* Set Data Side */
-	mtdcr	ocmiscr2, r3		/* Set Instruction Side */
+	mtdcr	OCM0_DSRC2, r3		/* Set Data Side */
+	mtdcr	OCM0_ISRC2, r3		/* Set Instruction Side */
 	addis	r3,0,0x0800		/* OCM Data Parity Disable - 1 Wait State */
-	mtdcr	ocmdsisdpc,r3
+	mtdcr	OCM0_DISDPC,r3
 
 	isync
 #else /* CONFIG_405EZ */
@@ -1039,19 +1039,19 @@ _start:
 	/* Setup OCM */
 	lis	r0, 0x7FFF
 	ori	r0, r0, 0xFFFF
-	mfdcr	r3, ocmiscntl		/* get instr-side IRAM config */
-	mfdcr	r4, ocmdscntl		/* get data-side IRAM config */
+	mfdcr	r3, OCM0_ISCNTL		/* get instr-side IRAM config */
+	mfdcr	r4, OCM0_DSCNTL		/* get data-side IRAM config */
 	and	r3, r3, r0		/* disable data-side IRAM */
 	and	r4, r4, r0		/* disable data-side IRAM */
-	mtdcr	ocmiscntl, r3		/* set instr-side IRAM config */
-	mtdcr	ocmdscntl, r4		/* set data-side IRAM config */
+	mtdcr	OCM0_ISCNTL, r3		/* set instr-side IRAM config */
+	mtdcr	OCM0_DSCNTL, r4		/* set data-side IRAM config */
 	isync
 
 	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
-	mtdcr	ocmdsarc, r3
+	mtdcr	OCM0_DSARC, r3
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
-	mtdcr	ocmdscntl, r4
+	mtdcr	OCM0_DSCNTL, r4
 	isync
 #endif /* CONFIG_405EZ */
 #endif
@@ -1061,16 +1061,16 @@ _start:
 	/*----------------------------------------------------------------------- */
 #ifdef CONFIG_SYS_INIT_DCACHE_CS
 	li	r4, PBxAP
-	mtdcr	ebccfga, r4
+	mtdcr	EBC0_CFGADDR, r4
 	lis	r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
 	ori	r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
 	addi	r4, 0, PBxCR
-	mtdcr	ebccfga, r4
+	mtdcr	EBC0_CFGADDR, r4
 	lis	r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
 	ori	r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
-	mtdcr	ebccfgd, r4
+	mtdcr	EBC0_CFGDATA, r4
 
 	/*
 	 * Enable the data cache for the 128MB storage access control region
@@ -1428,16 +1428,16 @@ relocate_code:
 
 	/* Restore the EBC parameters */
 	li	r3, PBxAP
-	mtdcr	ebccfga, r3
+	mtdcr	EBC0_CFGADDR, r3
 	lis	r3, PBxAP_VAL@h
 	ori	r3, r3, PBxAP_VAL@l
-	mtdcr	ebccfgd, r3
+	mtdcr	EBC0_CFGDATA, r3
 
 	li	r3, PBxCR
-	mtdcr	ebccfga, r3
+	mtdcr	EBC0_CFGADDR, r3
 	lis	r3, PBxCR_VAL@h
 	ori	r3, r3, PBxCR_VAL@l
-	mtdcr	ebccfgd, r3
+	mtdcr	EBC0_CFGDATA, r3
 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
 	/* Restore registers */
@@ -1860,38 +1860,38 @@ ppc405ep_init:
 	ori	r4,r4,CONFIG_SYS_GPIO0_TCR@l
 	stw	r4,0(r3)
 
-	li	r3,pb1ap		/* program EBC bank 1 for RTC access */
-	mtdcr	ebccfga,r3
+	li	r3,PB1AP		/* program EBC bank 1 for RTC access */
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB1AP@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB1AP@l
-	mtdcr	ebccfgd,r3
-	li	r3,pb1cr
-	mtdcr	ebccfga,r3
+	mtdcr	EBC0_CFGDATA,r3
+	li	r3,PB1CR
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB1CR@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB1CR@l
-	mtdcr	ebccfgd,r3
+	mtdcr	EBC0_CFGDATA,r3
 
-	li	r3,pb1ap		/* program EBC bank 1 for RTC access */
-	mtdcr	ebccfga,r3
+	li	r3,PB1AP		/* program EBC bank 1 for RTC access */
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB1AP@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB1AP@l
-	mtdcr	ebccfgd,r3
-	li	r3,pb1cr
-	mtdcr	ebccfga,r3
+	mtdcr	EBC0_CFGDATA,r3
+	li	r3,PB1CR
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB1CR@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB1CR@l
-	mtdcr	ebccfgd,r3
+	mtdcr	EBC0_CFGDATA,r3
 
-	li	r3,pb4ap		/* program EBC bank 4 for FPGA access */
-	mtdcr	ebccfga,r3
+	li	r3,PB4AP		/* program EBC bank 4 for FPGA access */
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB4AP@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB4AP@l
-	mtdcr	ebccfgd,r3
-	li	r3,pb4cr
-	mtdcr	ebccfga,r3
+	mtdcr	EBC0_CFGDATA,r3
+	li	r3,PB4CR
+	mtdcr	EBC0_CFGADDR,r3
 	lis	r3,CONFIG_SYS_EBC_PB4CR@h
 	ori	r3,r3,CONFIG_SYS_EBC_PB4CR@l
-	mtdcr	ebccfgd,r3
+	mtdcr	EBC0_CFGDATA,r3
 #endif
 
 	/*
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index faf7f08..5bb4f3c 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -206,14 +206,14 @@ void usb_dev_init()
 #ifdef USB_2_0_DEVICE
 	printf("USB 2.0 Device init\n");
 	/*select 2.0 device */
-	mtsdr(sdr_usb0, 0x0);	/* 2.0 */
+	mtsdr(SDR0_USB0, 0x0);	/* 2.0 */
 
 	/*usb dev init */
 	*(unsigned char *)USB2D0_POWER_8 = 0xa1;	/* 2.0 */
 #else
 	printf("USB 1.1 Device init\n");
 	/*select 1.1 device */
-	mtsdr(sdr_usb0, 0x2);	/* 1.1 */
+	mtsdr(SDR0_USB0, 0x2);	/* 1.1 */
 
 	/*usb dev init */
 	*(unsigned char *)USB2D0_POWER_8 = 0xc0;	/* 1.1 */
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 0891936..0dd6789 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -207,8 +207,8 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	mtebc(EBC0_CFG, 0xb8400000);
 
-	mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
-	mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
+	mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
+	mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
 #endif
 
 	chip++;
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 329eef0..afd1084 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -319,9 +319,9 @@ static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p)
     defined(CONFIG_405EX)
 	u32 val;
 
-	mfsdr(sdr_mfr, val);
+	mfsdr(SDR0_MFR, val);
 	val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
-	mtsdr(sdr_mfr, val);
+	mtsdr(SDR0_MFR, val);
 #elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
 	u32 val;
 
@@ -338,9 +338,9 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p)
     defined(CONFIG_405EX)
 	u32 val;
 
-	mfsdr(sdr_mfr, val);
+	mfsdr(SDR0_MFR, val);
 	val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
-	mtsdr(sdr_mfr, val);
+	mtsdr(SDR0_MFR, val);
 #elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
 	u32 val;
 
@@ -364,14 +364,14 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcarr, (MAL_CR_MMSR >> (hw_p->devnum * 2)));
+	mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> (hw_p->devnum * 2)));
 #else
-	mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum));
+	mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> hw_p->devnum));
 #endif
-	mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum));
+	mtdcr (MAL0_RXCARR, (MAL_CR_MMSR >> hw_p->devnum));
 
 	/* wait for reset */
-	while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
+	while (mfdcr (MAL0_RXCASR) & (MAL_CR_MMSR >> hw_p->devnum)) {
 		udelay (1000);	/* Delay 1 MS so as not to hammer the register */
 		val--;
 		if (val == 0)
@@ -408,7 +408,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	unsigned long zmiifer;
 	unsigned long rmiifer;
 
-	mfsdr(sdr_pfc1, pfc1);
+	mfsdr(SDR0_PFC1, pfc1);
 	pfc1 = SDR0_PFC1_EPS_DECODE(pfc1);
 
 	zmiifer = 0;
@@ -498,7 +498,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	unsigned long zmiifer=0x0;
 	unsigned long pfc1;
 
-	mfsdr(sdr_pfc1, pfc1);
+	mfsdr(SDR0_PFC1, pfc1);
 	pfc1 &= SDR0_PFC1_SELECT_MASK;
 
 	switch (pfc1) {
@@ -1240,13 +1240,13 @@ get_speed:
     !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
     !defined(CONFIG_460EX) && !defined(CONFIG_460GT)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mfsdr(sdr_mfr, reg);
+	mfsdr(SDR0_MFR, reg);
 	if (speed == 100) {
 		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
 	} else {
 		reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
 	}
-	mtsdr(sdr_mfr, reg);
+	mtsdr(SDR0_MFR, reg);
 #endif
 
 	/* Set ZMII/RGMII speed according to the phy link speed */
@@ -1302,13 +1302,13 @@ get_speed:
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
     defined(CONFIG_405EX)
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
 	       MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
 #else
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
 	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
 	if (get_pvr() == PVR_440GP_RB) {
-		mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
+		mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
 	}
 #endif
 
@@ -1398,86 +1398,86 @@ get_speed:
 	case 1:
 		/* setup MAL tx & rx channel pointers */
 #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
-		mtdcr (maltxctp2r, hw_p->tx_phys);
+		mtdcr (MAL0_TXCTP2R, hw_p->tx_phys);
 #else
-		mtdcr (maltxctp1r, hw_p->tx_phys);
+		mtdcr (MAL0_TXCTP1R, hw_p->tx_phys);
 #endif
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
 
 #if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-		mtdcr (malrxctp8r, hw_p->rx_phys);
+		mtdcr (MAL0_RXCTP8R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS8, ENET_MAX_MTU_ALIGNED / 16);
 #else
-		mtdcr (malrxctp1r, hw_p->rx_phys);
+		mtdcr (MAL0_RXCTP1R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS1, ENET_MAX_MTU_ALIGNED / 16);
 #endif
 		break;
 #if defined (CONFIG_440GX)
 	case 2:
 		/* setup MAL tx & rx channel pointers */
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
-		mtdcr (maltxctp2r, hw_p->tx_phys);
-		mtdcr (malrxctp2r, hw_p->rx_phys);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
+		mtdcr (MAL0_TXCTP2R, hw_p->tx_phys);
+		mtdcr (MAL0_RXCTP2R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS2, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 	case 3:
 		/* setup MAL tx & rx channel pointers */
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (maltxctp3r, hw_p->tx_phys);
-		mtdcr (malrxbattr, 0x0);
-		mtdcr (malrxctp3r, hw_p->rx_phys);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_TXCTP3R, hw_p->tx_phys);
+		mtdcr (MAL0_RXBADDR, 0x0);
+		mtdcr (MAL0_RXCTP3R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS3, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 #endif /* CONFIG_440GX */
 #if defined (CONFIG_460GT)
 	case 2:
 		/* setup MAL tx & rx channel pointers */
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
-		mtdcr (maltxctp2r, hw_p->tx_phys);
-		mtdcr (malrxctp16r, hw_p->rx_phys);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
+		mtdcr (MAL0_TXCTP2R, hw_p->tx_phys);
+		mtdcr (MAL0_RXCTP16R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS16, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 	case 3:
 		/* setup MAL tx & rx channel pointers */
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
-		mtdcr (maltxctp3r, hw_p->tx_phys);
-		mtdcr (malrxctp24r, hw_p->rx_phys);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
+		mtdcr (MAL0_TXCTP3R, hw_p->tx_phys);
+		mtdcr (MAL0_RXCTP24R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS24, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 #endif /* CONFIG_460GT */
 	case 0:
 	default:
 		/* setup MAL tx & rx channel pointers */
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
-		mtdcr (maltxctp0r, hw_p->tx_phys);
-		mtdcr (malrxctp0r, hw_p->rx_phys);
+		mtdcr (MAL0_TXCTP0R, hw_p->tx_phys);
+		mtdcr (MAL0_RXCTP0R, hw_p->rx_phys);
 		/* set RX buffer size */
-		mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);
+		mtdcr (MAL0_RCBS0, ENET_MAX_MTU_ALIGNED / 16);
 		break;
 	}
 
 	/* Enable MAL transmit and receive channels */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
 #else
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> hw_p->devnum));
 #endif
-	mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+	mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum));
 
 	/* set transmit enable & receive enable */
 	out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
@@ -1493,9 +1493,9 @@ get_speed:
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 		unsigned long pfc1;
 
-		mfsdr (sdr_pfc1, pfc1);
+		mfsdr (SDR0_PFC1, pfc1);
 		pfc1 |= SDR0_PFC1_EM_1000;
-		mtsdr (sdr_pfc1, pfc1);
+		mtsdr (SDR0_PFC1, pfc1);
 #endif
 		mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST;
 	} else if (speed == _100BASET)
@@ -1665,7 +1665,7 @@ int enetInt (struct eth_device *dev)
 		/* look at MAL and EMAC error interrupts */
 		if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) {
 			/* we have a MAL error interrupt */
-			mal_isr = mfdcr(malesr);
+			mal_isr = mfdcr(MAL0_ESR);
 			mal_err(dev, mal_isr, uic_mal_err,
 				 MAL_UIC_DEF, MAL_UIC_ERR);
 
@@ -1691,8 +1691,8 @@ int enetInt (struct eth_device *dev)
 		/* handle MAX TX EOB interrupt from a tx */
 		if (uic_mal & UIC_MAL_TXEOB) {
 			/* clear MAL interrupt status bits */
-			mal_eob = mfdcr(maltxeobisr);
-			mtdcr(maltxeobisr, mal_eob);
+			mal_eob = mfdcr(MAL0_TXEOBISR);
+			mtdcr(MAL0_TXEOBISR, mal_eob);
 			mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB);
 
 			/* indicate that we serviced an interrupt */
@@ -1703,7 +1703,7 @@ int enetInt (struct eth_device *dev)
 		/* handle MAL RX EOB interupt from a receive */
 		/* check for EOB on valid channels	     */
 		if (uic_mal & UIC_MAL_RXEOB) {
-			mal_eob = mfdcr(malrxeobisr);
+			mal_eob = mfdcr(MAL0_RXEOBISR);
 			if (mal_eob &
 			    (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) {
 				/* push packet to upper layer */
@@ -1731,11 +1731,11 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
 {
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
-	mtdcr (malesr, isr);	/* clear interrupt */
+	mtdcr (MAL0_ESR, isr);	/* clear interrupt */
 
 	/* clear DE interrupt */
-	mtdcr (maltxdeir, 0xC0000000);
-	mtdcr (malrxdeir, 0x80000000);
+	mtdcr (MAL0_TXDEIR, 0xC0000000);
+	mtdcr (MAL0_RXDEIR, 0x80000000);
 
 #ifdef INFO_4XX_ENET
 	printf ("\nMAL error occured.... ISR = %lx UIC = = %lx	MAL_DEF = %lx  MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
@@ -1769,10 +1769,10 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
 	int i;
 	int loop_count = 0;
 
-	rx_eob_isr = mfdcr (malrxeobisr);
+	rx_eob_isr = mfdcr (MAL0_RXEOBISR);
 	if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) {
 		/* clear EOB */
-		mtdcr (malrxeobisr, rx_eob_isr);
+		mtdcr (MAL0_RXEOBISR, rx_eob_isr);
 
 		/* EMAC RX done */
 		while (1) {	/* do all */
@@ -1912,10 +1912,10 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 #if defined(CONFIG_440GX)
 	unsigned long pfc1;
 
-	mfsdr (sdr_pfc1, pfc1);
+	mfsdr (SDR0_PFC1, pfc1);
 	pfc1 &= ~(0x01e00000);
 	pfc1 |= 0x01200000;
-	mtsdr (sdr_pfc1, pfc1);
+	mtsdr (SDR0_PFC1, pfc1);
 #endif
 
 	/* first clear all mac-addresses */
@@ -2036,10 +2036,10 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 				MAL_IER_DE | MAL_IER_NE | MAL_IER_TE |
 				MAL_IER_OPBE | MAL_IER_PLBE;
 #endif
-			mtdcr (malesr, 0xffffffff);	/* clear pending interrupts */
-			mtdcr (maltxdeir, 0xffffffff);	/* clear pending interrupts */
-			mtdcr (malrxdeir, 0xffffffff);	/* clear pending interrupts */
-			mtdcr (malier, mal_ier);
+			mtdcr (MAL0_ESR, 0xffffffff);	/* clear pending interrupts */
+			mtdcr (MAL0_TXDEIR, 0xffffffff);	/* clear pending interrupts */
+			mtdcr (MAL0_RXDEIR, 0xffffffff);	/* clear pending interrupts */
+			mtdcr (MAL0_IER, mal_ier);
 
 			/* install MAL interrupt handler */
 			irq_install_handler (VECNUM_MAL_SERR,
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 553845d..40e4735 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -207,9 +207,9 @@
 #define CONFIG_SYS_EBC_PB5CR   0xFD21A000
 
 /* bank 6 is unused */
-/* pb6ap = 0 */
+/* PB6AP = 0 */
 #define CONFIG_SYS_EBC_PB6AP   0x00000000
-/* pb6cr = 0 */
+/* PB6CR = 0 */
 #define CONFIG_SYS_EBC_PB6CR   0x00000000
 
 /* bank 7 is LED register */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 73d6d24..a62f1b4 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -214,9 +214,9 @@
 #define CONFIG_SYS_EBC_PB5CR   0xFD87A000
 
 /* bank 6 is unused */
-/* pb6ap = 0 */
+/* PB6AP = 0 */
 #define CONFIG_SYS_EBC_PB6AP   0x00000000
-/* pb6cr = 0 */
+/* PB6CR = 0 */
 #define CONFIG_SYS_EBC_PB6CR   0x00000000
 
 /* bank 7 is LED register */
diff --git a/include/ppc405.h b/include/ppc405.h
index 55649e4..5e56897 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -42,54 +42,39 @@
  * DMA
  ******************************************************************************/
 #define DMA_DCR_BASE 0x100
-#define dmacr0	(DMA_DCR_BASE+0x00)  /* DMA channel control register 0	     */
-#define dmact0	(DMA_DCR_BASE+0x01)  /* DMA count register 0		     */
-#define dmada0	(DMA_DCR_BASE+0x02)  /* DMA destination address register 0   */
-#define dmasa0	(DMA_DCR_BASE+0x03)  /* DMA source address register 0	     */
-#define dmasb0	(DMA_DCR_BASE+0x04)  /* DMA scatter/gather descriptor addr 0 */
-#define dmacr1	(DMA_DCR_BASE+0x08)  /* DMA channel control register 1	     */
-#define dmact1	(DMA_DCR_BASE+0x09)  /* DMA count register 1		     */
-#define dmada1	(DMA_DCR_BASE+0x0a)  /* DMA destination address register 1   */
-#define dmasa1	(DMA_DCR_BASE+0x0b)  /* DMA source address register 1	     */
-#define dmasb1	(DMA_DCR_BASE+0x0c)  /* DMA scatter/gather descriptor addr 1 */
-#define dmacr2	(DMA_DCR_BASE+0x10)  /* DMA channel control register 2	     */
-#define dmact2	(DMA_DCR_BASE+0x11)  /* DMA count register 2		     */
-#define dmada2	(DMA_DCR_BASE+0x12)  /* DMA destination address register 2   */
-#define dmasa2	(DMA_DCR_BASE+0x13)  /* DMA source address register 2	     */
-#define dmasb2	(DMA_DCR_BASE+0x14)  /* DMA scatter/gather descriptor addr 2 */
-#define dmacr3	(DMA_DCR_BASE+0x18)  /* DMA channel control register 3	     */
-#define dmact3	(DMA_DCR_BASE+0x19)  /* DMA count register 3		     */
-#define dmada3	(DMA_DCR_BASE+0x1a)  /* DMA destination address register 3   */
-#define dmasa3	(DMA_DCR_BASE+0x1b)  /* DMA source address register 3	     */
-#define dmasb3	(DMA_DCR_BASE+0x1c)  /* DMA scatter/gather descriptor addr 3 */
-#define dmasr	(DMA_DCR_BASE+0x20)  /* DMA status register		     */
-#define dmasgc	(DMA_DCR_BASE+0x23)  /* DMA scatter/gather command register  */
-#define dmaadr	(DMA_DCR_BASE+0x24)  /* DMA address decode register	     */
+#define DMACR0	(DMA_DCR_BASE+0x00)  /* DMA channel control register 0	     */
+#define DMACT0	(DMA_DCR_BASE+0x01)  /* DMA count register 0		     */
+#define DMADA0	(DMA_DCR_BASE+0x02)  /* DMA destination address register 0   */
+#define DMASA0	(DMA_DCR_BASE+0x03)  /* DMA source address register 0	     */
+#define DMASB0	(DMA_DCR_BASE+0x04)  /* DMA scatter/gather descriptor addr 0 */
+#define DMACR1	(DMA_DCR_BASE+0x08)  /* DMA channel control register 1	     */
+#define DMACT1	(DMA_DCR_BASE+0x09)  /* DMA count register 1		     */
+#define DMADA1	(DMA_DCR_BASE+0x0a)  /* DMA destination address register 1   */
+#define DMASA1	(DMA_DCR_BASE+0x0b)  /* DMA source address register 1	     */
+#define DMASB1	(DMA_DCR_BASE+0x0c)  /* DMA scatter/gather descriptor addr 1 */
+#define DMACR2	(DMA_DCR_BASE+0x10)  /* DMA channel control register 2	     */
+#define DMACT2	(DMA_DCR_BASE+0x11)  /* DMA count register 2		     */
+#define DMADA2	(DMA_DCR_BASE+0x12)  /* DMA destination address register 2   */
+#define DMASA2	(DMA_DCR_BASE+0x13)  /* DMA source address register 2	     */
+#define DMASB2	(DMA_DCR_BASE+0x14)  /* DMA scatter/gather descriptor addr 2 */
+#define DMACR3	(DMA_DCR_BASE+0x18)  /* DMA channel control register 3	     */
+#define DMACT3	(DMA_DCR_BASE+0x19)  /* DMA count register 3		     */
+#define DMADA3	(DMA_DCR_BASE+0x1a)  /* DMA destination address register 3   */
+#define DMASA3	(DMA_DCR_BASE+0x1b)  /* DMA source address register 3	     */
+#define DMASB3	(DMA_DCR_BASE+0x1c)  /* DMA scatter/gather descriptor addr 3 */
+#define DMASR	(DMA_DCR_BASE+0x20)  /* DMA status register		     */
+#define DMASGC	(DMA_DCR_BASE+0x23)  /* DMA scatter/gather command register  */
+#define DMAADR	(DMA_DCR_BASE+0x24)  /* DMA address decode register	     */
 
 #ifndef CONFIG_405EP
 /******************************************************************************
  * Decompression Controller
  ******************************************************************************/
 #define DECOMP_DCR_BASE 0x14
-#define kiar  (DECOMP_DCR_BASE+0x0)  /* Decompression controller addr reg    */
-#define kidr  (DECOMP_DCR_BASE+0x1)  /* Decompression controller data reg    */
-  /* values for kiar register - indirect addressing of these regs */
-  #define kitor0      0x00    /* index table origin register 0	      */
-  #define kitor1      0x01    /* index table origin register 1	      */
-  #define kitor2      0x02    /* index table origin register 2	      */
-  #define kitor3      0x03    /* index table origin register 3	      */
-  #define kaddr0      0x04    /* address decode definition regsiter 0 */
-  #define kaddr1      0x05    /* address decode definition regsiter 1 */
-  #define kconf       0x40    /* decompression core config register   */
-  #define kid	      0x41    /* decompression core ID	   register   */
-  #define kver	      0x42    /* decompression core version # reg     */
-  #define kpear       0x50    /* bus error addr reg (PLB addr)	      */
-  #define kbear       0x51    /* bus error addr reg (DCP to EBIU addr)*/
-  #define kesr0       0x52    /* bus error status reg 0  (R/clear)    */
-  #define kesr0s      0x53    /* bus error status reg 0  (set)	      */
-  /* There are 0x400 of the following registers, from krom0 to krom3ff*/
-  /* Only the first one is given here.				      */
-  #define krom0      0x400    /* SRAM/ROM read/write		      */
+#define KIAR  (DECOMP_DCR_BASE+0x0)  /* Decompression controller addr reg    */
+#define KIDR  (DECOMP_DCR_BASE+0x1)  /* Decompression controller data reg    */
+/* values for kiar register - indirect addressing of these regs */
+#define KCONF       0x40    /* decompression core config register   */
 #endif
 
 /******************************************************************************
@@ -100,38 +85,37 @@
 #else
 #define POWERMAN_DCR_BASE 0xb8
 #endif
-#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status	     */
-#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable	     */
-#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force		     */
+#define CPMSR (POWERMAN_DCR_BASE+0x0) /* Power management status	     */
+#define CPMER (POWERMAN_DCR_BASE+0x1) /* Power management enable	     */
+#define CPMFR (POWERMAN_DCR_BASE+0x2) /* Power management force		     */
 
 /******************************************************************************
  * Extrnal Bus Controller
  ******************************************************************************/
-  /* values for ebccfga register - indirect addressing of these regs */
-  #define pb0cr       0x00    /* periph bank 0 config reg	     */
-  #define pb1cr       0x01    /* periph bank 1 config reg	     */
-  #define pb2cr       0x02    /* periph bank 2 config reg	     */
-  #define pb3cr       0x03    /* periph bank 3 config reg	     */
-  #define pb4cr       0x04    /* periph bank 4 config reg	     */
+  /* values for EBC0_CFGADDR register - indirect addressing of these regs */
+  #define PB0CR       0x00    /* periph bank 0 config reg	     */
+  #define PB1CR       0x01    /* periph bank 1 config reg	     */
+  #define PB2CR       0x02    /* periph bank 2 config reg	     */
+  #define PB3CR       0x03    /* periph bank 3 config reg	     */
+  #define PB4CR       0x04    /* periph bank 4 config reg	     */
 #ifndef CONFIG_405EP
-  #define pb5cr       0x05    /* periph bank 5 config reg	     */
-  #define pb6cr       0x06    /* periph bank 6 config reg	     */
-  #define pb7cr       0x07    /* periph bank 7 config reg	     */
+  #define PB5CR       0x05    /* periph bank 5 config reg	     */
+  #define PB6CR       0x06    /* periph bank 6 config reg	     */
+  #define PB7CR       0x07    /* periph bank 7 config reg	     */
 #endif
-  #define pb0ap       0x10    /* periph bank 0 access parameters     */
-  #define pb1ap       0x11    /* periph bank 1 access parameters     */
-  #define pb2ap       0x12    /* periph bank 2 access parameters     */
-  #define pb3ap       0x13    /* periph bank 3 access parameters     */
-  #define pb4ap       0x14    /* periph bank 4 access parameters     */
+  #define PB0AP       0x10    /* periph bank 0 access parameters     */
+  #define PB1AP       0x11    /* periph bank 1 access parameters     */
+  #define PB2AP       0x12    /* periph bank 2 access parameters     */
+  #define PB3AP       0x13    /* periph bank 3 access parameters     */
+  #define PB4AP       0x14    /* periph bank 4 access parameters     */
 #ifndef CONFIG_405EP
-  #define pb5ap       0x15    /* periph bank 5 access parameters     */
-  #define pb6ap       0x16    /* periph bank 6 access parameters     */
-  #define pb7ap       0x17    /* periph bank 7 access parameters     */
+  #define PB5AP       0x15    /* periph bank 5 access parameters     */
+  #define PB6AP       0x16    /* periph bank 6 access parameters     */
+  #define PB7AP       0x17    /* periph bank 7 access parameters     */
 #endif
-  #define pbear       0x20    /* periph bus error addr reg	     */
-  #define pbesr0      0x21    /* periph bus error status reg 0	     */
-  #define pbesr1      0x22    /* periph bus error status reg 1	     */
-  #define epcr	      0x23    /* external periph control reg	     */
+  #define PBEAR       0x20    /* periph bus error addr reg	     */
+  #define PBESR0      0x21    /* periph bus error status reg 0	     */
+  #define PBESR1      0x22    /* periph bus error status reg 1	     */
 #define EBC0_CFG	0x23	/* external bus configuration reg	*/
 
 #ifdef CONFIG_405EP
@@ -139,12 +123,12 @@
  * Control
  ******************************************************************************/
 #define CNTRL_DCR_BASE 0x0f0
-#define cpc0_pllmr0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0		   */
-#define cpc0_boot     (CNTRL_DCR_BASE+0x1)  /* Clock status register		   */
-#define cpc0_epctl    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register	   */
-#define cpc0_pllmr1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1		   */
-#define cpc0_ucr      (CNTRL_DCR_BASE+0x5)  /* UART control register		   */
-#define cpc0_pci      (CNTRL_DCR_BASE+0x9)  /* PCI control register		   */
+#define CPC0_PLLMR0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0		   */
+#define CPC0_BOOT     (CNTRL_DCR_BASE+0x1)  /* Clock status register		   */
+#define CPC0_EPCTL    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register	   */
+#define CPC0_PLLMR1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1		   */
+#define CPC0_UCR      (CNTRL_DCR_BASE+0x5)  /* UART control register		   */
+#define CPC0_PCI      (CNTRL_DCR_BASE+0x9)  /* PCI control register		   */
 
 #define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register	   */
 #define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register   */
@@ -401,10 +385,10 @@
 #define VCO_MIN     500
 #define VCO_MAX     1000
 #elif defined(CONFIG_405EZ)
-#define sdrnand0	0x4000
-#define sdrultra0	0x4040
-#define sdrultra1	0x4050
-#define sdricintstat	0x4510
+#define SDR0_NAND0	0x4000
+#define SDR0_ULTRA0	0x4040
+#define SDR0_ULTRA1	0x4050
+#define SDR0_ICINTSTAT	0x4510
 
 #define SDR_NAND0_NDEN		0x80000000
 #define SDR_NAND0_NDBTEN	0x40000000
@@ -429,21 +413,19 @@
 #define SDR_ICTX0_STAT	0x40000000
 #define SDR_ICTX1_STAT	0x20000000
 
-#define SDR_PINSTP	0x40
+#define SDR0_PINSTP	0x40
 
 /******************************************************************************
  * Control
  ******************************************************************************/
 /* CPR Registers */
-#define cprclkupd	0x020		/* CPR_CLKUPD */
-#define cprpllc		0x040		/* CPR_PLLC */
-#define cprplld		0x060		/* CPR_PLLD */
-#define cprprimad	0x080		/* CPR_PRIMAD */
-#define cprperd0	0x0e0		/* CPR_PERD0 */
-#define cprperd1	0x0e1		/* CPR_PERD1 */
-#define cprperc0	0x180		/* CPR_PERC0 */
-#define cprmisc0	0x181		/* CPR_MISC0 */
-#define cprmisc1	0x182		/* CPR_MISC1 */
+#define CPR0_CLKUP	0x020		/* CPR_CLKUPD */
+#define CPR0_PLLC		0x040		/* CPR_PLLC */
+#define CPR0_PLLD		0x060		/* CPR_PLLD */
+#define CPC0_PRIMAD	0x080		/* CPR_PRIMAD */
+#define CPC0_PERD0	0x0e0		/* CPR_PERD0 */
+#define CPC0_PERD1	0x0e1		/* CPR_PERD1 */
+#define CPC0_PERC0	0x180		/* CPR_PERC0 */
 
 #define CPR_CLKUPD_ENPLLCH_EN  0x40000000     /* Enable CPR PLL Changes */
 #define CPR_CLKUPD_ENDVCH_EN   0x20000000     /* Enable CPR Sys. Div. Changes */
@@ -470,21 +452,14 @@
  * Control
  ******************************************************************************/
 #define CNTRL_DCR_BASE 0x0b0
-#define pllmd	(CNTRL_DCR_BASE+0x0)  /* PLL mode  register		     */
-#define cntrl0	(CNTRL_DCR_BASE+0x1)  /* Control 0 register		     */
-#define cntrl1	(CNTRL_DCR_BASE+0x2)  /* Control 1 register		     */
-#define reset	(CNTRL_DCR_BASE+0x3)  /* reset register			     */
-#define strap	(CNTRL_DCR_BASE+0x4)  /* strap register			     */
-
-#define CPC0_CR0  (CNTRL_DCR_BASE+0x1)	/* chip control register 0	     */
-#define CPC0_CR1  (CNTRL_DCR_BASE+0x2)	/* chip control register 1	     */
-#define CPC0_PSR  (CNTRL_DCR_BASE+0x4)	/* chip pin strapping register	     */
+#define CPC0_PLLMR	(CNTRL_DCR_BASE + 0x0)	/* PLL mode  register */
+#define CPC0_CR0	(CNTRL_DCR_BASE + 0x1)	/* chip control register 0 */
+#define CPC0_CR1	(CNTRL_DCR_BASE + 0x2)	/* chip control register 1 */
+#define CPC0_PSR	(CNTRL_DCR_BASE + 0x4)	/* chip pin strapping reg */
 
 /* CPC0_ECR/CPC0_EIRR: PPC405GPr only */
-#define CPC0_EIRR (CNTRL_DCR_BASE+0x6)	/* external interrupt routing register */
-#define CPC0_ECR  (0xaa)		/* edge conditioner register */
-
-#define ecr	(0xaa)		      /* edge conditioner register (405gpr)  */
+#define CPC0_EIRR	(CNTRL_DCR_BASE + 0x6)	/* ext interrupt routing reg */
+#define CPC0_ECR	0xaa			/* edge conditioner register */
 
 /* Bit definitions */
 #define PLLMR_FWD_DIV_MASK	0xE0000000     /* Forward Divisor */
@@ -557,140 +532,38 @@
  ******************************************************************************/
 #if defined(CONFIG_405EZ)
 #define	MAL_DCR_BASE	0x380
-#define	malmcr		(MAL_DCR_BASE+0x00)	/* MAL Config reg	      */
-#define	malesr		(MAL_DCR_BASE+0x01)	/* Err Status reg (Read/Clear)*/
-#define	malier		(MAL_DCR_BASE+0x02)	/* Interrupt enable reg	      */
-#define	maldbr		(MAL_DCR_BASE+0x03)	/* Mal Debug reg (Read only)  */
-#define	maltxcasr	(MAL_DCR_BASE+0x04)	/* TX Channel active reg (set)*/
-#define	maltxcarr	(MAL_DCR_BASE+0x05)	/* TX Channel active reg (Reset)     */
-#define	maltxeobisr	(MAL_DCR_BASE+0x06)	/* TX End of buffer int status reg   */
-#define	maltxdeir	(MAL_DCR_BASE+0x07)	/* TX Descr. Error Int reg    */
-/*				      0x08-0x0F	   Reserved		      */
-#define	malrxcasr	(MAL_DCR_BASE+0x10)	/* RX Channel active reg (set)*/
-#define	malrxcarr	(MAL_DCR_BASE+0x11)	/* RX Channel active reg (Reset)     */
-#define	malrxeobisr	(MAL_DCR_BASE+0x12)	/* RX End of buffer int status reg   */
-#define	malrxdeir	(MAL_DCR_BASE+0x13)	/* RX Descr. Error Int reg  */
-/*				      0x14-0x1F	   Reserved		    */
-#define	maltxctp0r	(MAL_DCR_BASE+0x20)  /* TX 0 Channel table ptr reg  */
-#define	maltxctp1r	(MAL_DCR_BASE+0x21)  /* TX 1 Channel table ptr reg  */
-#define	maltxctp2r	(MAL_DCR_BASE+0x22)  /* TX 2 Channel table ptr reg  */
-#define	maltxctp3r	(MAL_DCR_BASE+0x23)  /* TX 3 Channel table ptr reg  */
-#define	maltxctp4r	(MAL_DCR_BASE+0x24)  /* TX 4 Channel table ptr reg  */
-#define	maltxctp5r	(MAL_DCR_BASE+0x25)  /* TX 5 Channel table ptr reg  */
-#define	maltxctp6r	(MAL_DCR_BASE+0x26)  /* TX 6 Channel table ptr reg  */
-#define	maltxctp7r	(MAL_DCR_BASE+0x27)  /* TX 7 Channel table ptr reg  */
-#define	maltxctp8r	(MAL_DCR_BASE+0x28)  /* TX 8 Channel table ptr reg  */
-#define	maltxctp9r	(MAL_DCR_BASE+0x29)  /* TX 9 Channel table ptr reg  */
-#define	maltxctp10r	(MAL_DCR_BASE+0x2A)  /* TX 10 Channel table ptr reg */
-#define	maltxctp11r	(MAL_DCR_BASE+0x2B)  /* TX 11 Channel table ptr reg */
-#define	maltxctp12r	(MAL_DCR_BASE+0x2C)  /* TX 12 Channel table ptr reg */
-#define	maltxctp13r	(MAL_DCR_BASE+0x2D)  /* TX 13 Channel table ptr reg */
-#define	maltxctp14r	(MAL_DCR_BASE+0x2E)  /* TX 14 Channel table ptr reg */
-#define	maltxctp15r	(MAL_DCR_BASE+0x2F)  /* TX 15 Channel table ptr reg */
-#define	maltxctp16r	(MAL_DCR_BASE+0x30)  /* TX 16 Channel table ptr reg */
-#define	maltxctp17r	(MAL_DCR_BASE+0x31)  /* TX 17 Channel table ptr reg */
-#define	maltxctp18r	(MAL_DCR_BASE+0x32)  /* TX 18 Channel table ptr reg */
-#define	maltxctp19r	(MAL_DCR_BASE+0x33)  /* TX 19 Channel table ptr reg */
-#define	maltxctp20r	(MAL_DCR_BASE+0x34)  /* TX 20 Channel table ptr reg */
-#define	maltxctp21r	(MAL_DCR_BASE+0x35)  /* TX 21 Channel table ptr reg */
-#define	maltxctp22r	(MAL_DCR_BASE+0x36)  /* TX 22 Channel table ptr reg */
-#define	maltxctp23r	(MAL_DCR_BASE+0x37)  /* TX 23 Channel table ptr reg */
-#define	maltxctp24r	(MAL_DCR_BASE+0x38)  /* TX 24 Channel table ptr reg */
-#define	maltxctp25r	(MAL_DCR_BASE+0x39)  /* TX 25 Channel table ptr reg */
-#define	maltxctp26r	(MAL_DCR_BASE+0x3A)  /* TX 26 Channel table ptr reg */
-#define	maltxctp27r	(MAL_DCR_BASE+0x3B)  /* TX 27 Channel table ptr reg */
-#define	maltxctp28r	(MAL_DCR_BASE+0x3C)  /* TX 28 Channel table ptr reg */
-#define	maltxctp29r	(MAL_DCR_BASE+0x3D)  /* TX 29 Channel table ptr reg */
-#define	maltxctp30r	(MAL_DCR_BASE+0x3E)  /* TX 30 Channel table ptr reg */
-#define	maltxctp31r	(MAL_DCR_BASE+0x3F)  /* TX 31 Channel table ptr reg */
-#define	malrxctp0r	(MAL_DCR_BASE+0x40)  /* RX 0 Channel table ptr reg  */
-#define	malrxctp1r	(MAL_DCR_BASE+0x41)  /* RX 1 Channel table ptr reg  */
-#define	malrxctp2r	(MAL_DCR_BASE+0x42)  /* RX 2 Channel table ptr reg  */
-#define	malrxctp3r	(MAL_DCR_BASE+0x43)  /* RX 3 Channel table ptr reg  */
-#define	malrxctp4r	(MAL_DCR_BASE+0x44)  /* RX 4 Channel table ptr reg  */
-#define	malrxctp5r	(MAL_DCR_BASE+0x45)  /* RX 5 Channel table ptr reg  */
-#define	malrxctp6r	(MAL_DCR_BASE+0x46)  /* RX 6 Channel table ptr reg  */
-#define	malrxctp7r	(MAL_DCR_BASE+0x47)  /* RX 7 Channel table ptr reg  */
-#define	malrxctp8r	(MAL_DCR_BASE+0x48)  /* RX 8 Channel table ptr reg  */
-#define	malrxctp9r	(MAL_DCR_BASE+0x49)  /* RX 9 Channel table ptr reg  */
-#define	malrxctp10r	(MAL_DCR_BASE+0x4A)  /* RX 10 Channel table ptr reg */
-#define	malrxctp11r	(MAL_DCR_BASE+0x4B)  /* RX 11 Channel table ptr reg */
-#define	malrxctp12r	(MAL_DCR_BASE+0x4C)  /* RX 12 Channel table ptr reg */
-#define	malrxctp13r	(MAL_DCR_BASE+0x4D)  /* RX 13 Channel table ptr reg */
-#define	malrxctp14r	(MAL_DCR_BASE+0x4E)  /* RX 14 Channel table ptr reg */
-#define	malrxctp15r	(MAL_DCR_BASE+0x4F)  /* RX 15 Channel table ptr reg */
-#define	malrxctp16r	(MAL_DCR_BASE+0x50)  /* RX 16 Channel table ptr reg */
-#define	malrxctp17r	(MAL_DCR_BASE+0x51)  /* RX 17 Channel table ptr reg */
-#define	malrxctp18r	(MAL_DCR_BASE+0x52)  /* RX 18 Channel table ptr reg */
-#define	malrxctp19r	(MAL_DCR_BASE+0x53)  /* RX 19 Channel table ptr reg */
-#define	malrxctp20r	(MAL_DCR_BASE+0x54)  /* RX 20 Channel table ptr reg */
-#define	malrxctp21r	(MAL_DCR_BASE+0x55)  /* RX 21 Channel table ptr reg */
-#define	malrxctp22r	(MAL_DCR_BASE+0x56)  /* RX 22 Channel table ptr reg */
-#define	malrxctp23r	(MAL_DCR_BASE+0x57)  /* RX 23 Channel table ptr reg */
-#define	malrxctp24r	(MAL_DCR_BASE+0x58)  /* RX 24 Channel table ptr reg */
-#define	malrxctp25r	(MAL_DCR_BASE+0x59)  /* RX 25 Channel table ptr reg */
-#define	malrxctp26r	(MAL_DCR_BASE+0x5A)  /* RX 26 Channel table ptr reg */
-#define	malrxctp27r	(MAL_DCR_BASE+0x5B)  /* RX 27 Channel table ptr reg */
-#define	malrxctp28r	(MAL_DCR_BASE+0x5C)  /* RX 28 Channel table ptr reg */
-#define	malrxctp29r	(MAL_DCR_BASE+0x5D)  /* RX 29 Channel table ptr reg */
-#define	malrxctp30r	(MAL_DCR_BASE+0x5E)  /* RX 30 Channel table ptr reg */
-#define	malrxctp31r	(MAL_DCR_BASE+0x5F)  /* RX 31 Channel table ptr reg */
-#define	malrcbs0	(MAL_DCR_BASE+0x60)  /* RX 0 Channel buffer size reg */
-#define	malrcbs1	(MAL_DCR_BASE+0x61)  /* RX 1 Channel buffer size reg */
-#define	malrcbs2	(MAL_DCR_BASE+0x62)  /* RX 2 Channel buffer size reg */
-#define	malrcbs3	(MAL_DCR_BASE+0x63)  /* RX 3 Channel buffer size reg */
-#define	malrcbs4	(MAL_DCR_BASE+0x64)  /* RX 4 Channel buffer size reg */
-#define	malrcbs5	(MAL_DCR_BASE+0x65)  /* RX 5 Channel buffer size reg */
-#define	malrcbs6	(MAL_DCR_BASE+0x66)  /* RX 6 Channel buffer size reg */
-#define	malrcbs7	(MAL_DCR_BASE+0x67)  /* RX 7 Channel buffer size reg */
-#define	malrcbs8	(MAL_DCR_BASE+0x68)  /* RX 8 Channel buffer size reg */
-#define	malrcbs9	(MAL_DCR_BASE+0x69)  /* RX 9 Channel buffer size reg */
-#define	malrcbs10	(MAL_DCR_BASE+0x6A)  /* RX 10 Channel buffer size reg */
-#define	malrcbs11	(MAL_DCR_BASE+0x6B)  /* RX 11 Channel buffer size reg */
-#define	malrcbs12	(MAL_DCR_BASE+0x6C)  /* RX 12 Channel buffer size reg */
-#define	malrcbs13	(MAL_DCR_BASE+0x6D)  /* RX 13 Channel buffer size reg */
-#define	malrcbs14	(MAL_DCR_BASE+0x6E)  /* RX 14 Channel buffer size reg */
-#define	malrcbs15	(MAL_DCR_BASE+0x6F)  /* RX 15 Channel buffer size reg */
-#define	malrcbs16	(MAL_DCR_BASE+0x70)  /* RX 16 Channel buffer size reg */
-#define	malrcbs17	(MAL_DCR_BASE+0x71)  /* RX 17 Channel buffer size reg */
-#define	malrcbs18	(MAL_DCR_BASE+0x72)  /* RX 18 Channel buffer size reg */
-#define	malrcbs19	(MAL_DCR_BASE+0x73)  /* RX 19 Channel buffer size reg */
-#define	malrcbs20	(MAL_DCR_BASE+0x74)  /* RX 20 Channel buffer size reg */
-#define	malrcbs21	(MAL_DCR_BASE+0x75)  /* RX 21 Channel buffer size reg */
-#define	malrcbs22	(MAL_DCR_BASE+0x76)  /* RX 22 Channel buffer size reg */
-#define	malrcbs23	(MAL_DCR_BASE+0x77)  /* RX 23 Channel buffer size reg */
-#define	malrcbs24	(MAL_DCR_BASE+0x78)  /* RX 24 Channel buffer size reg */
-#define	malrcbs25	(MAL_DCR_BASE+0x79)  /* RX 25 Channel buffer size reg */
-#define	malrcbs26	(MAL_DCR_BASE+0x7A)  /* RX 26 Channel buffer size reg */
-#define	malrcbs27	(MAL_DCR_BASE+0x7B)  /* RX 27 Channel buffer size reg */
-#define	malrcbs28	(MAL_DCR_BASE+0x7C)  /* RX 28 Channel buffer size reg */
-#define	malrcbs29	(MAL_DCR_BASE+0x7D)  /* RX 29 Channel buffer size reg */
-#define	malrcbs30	(MAL_DCR_BASE+0x7E)  /* RX 30 Channel buffer size reg */
-#define	malrcbs31	(MAL_DCR_BASE+0x7F)  /* RX 31 Channel buffer size reg */
-
-#else /* !defined(CONFIG_405EZ) */
-
-#define MAL_DCR_BASE 0x180
-#define malmcr	(MAL_DCR_BASE+0x00)  /* MAL Config reg			     */
-#define malesr	(MAL_DCR_BASE+0x01)  /* Error Status reg (Read/Clear)	     */
-#define malier	(MAL_DCR_BASE+0x02)  /* Interrupt enable reg		     */
-#define maldbr	(MAL_DCR_BASE+0x03)  /* Mal Debug reg (Read only)	     */
-#define maltxcasr  (MAL_DCR_BASE+0x04)	/* TX Channel active reg (set)	     */
-#define maltxcarr  (MAL_DCR_BASE+0x05)	/* TX Channel active reg (Reset)     */
-#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg   */
-#define maltxdeir  (MAL_DCR_BASE+0x07)	/* TX Descr. Error Int reg	     */
-#define malrxcasr  (MAL_DCR_BASE+0x10)	/* RX Channel active reg (set)	     */
-#define malrxcarr  (MAL_DCR_BASE+0x11)	/* RX Channel active reg (Reset)     */
-#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg   */
-#define malrxdeir  (MAL_DCR_BASE+0x13)	/* RX Descr. Error Int reg	     */
-#define maltxctp0r (MAL_DCR_BASE+0x20)	/* TX 0 Channel table pointer reg    */
-#define maltxctp1r (MAL_DCR_BASE+0x21)	/* TX 1 Channel table pointer reg    */
-#define maltxctp2r (MAL_DCR_BASE+0x22)	/* TX 2 Channel table pointer reg    */
-#define malrxctp0r (MAL_DCR_BASE+0x40)	/* RX 0 Channel table pointer reg    */
-#define malrxctp1r (MAL_DCR_BASE+0x41)	/* RX 1 Channel table pointer reg    */
-#define malrcbs0   (MAL_DCR_BASE+0x60)	/* RX 0 Channel buffer size reg      */
-#define malrcbs1   (MAL_DCR_BASE+0x61)	/* RX 1 Channel buffer size reg      */
-#endif /* defined(CONFIG_405EZ) */
+#else
+#define MAL_DCR_BASE	0x180
+#endif
+#define	MAL0_CFG	(MAL_DCR_BASE + 0x00)	/* MAL Config reg */
+#define	MAL0_ESR	(MAL_DCR_BASE + 0x01)	/* Err Status (Read/Clear)*/
+#define	MAL0_IER	(MAL_DCR_BASE + 0x02)	/* Interrupt enable */
+#define	MAL0_TXCASR	(MAL_DCR_BASE + 0x04)	/* TX Channel active (set)*/
+#define	MAL0_TXCARR	(MAL_DCR_BASE + 0x05)	/* TX Channel active (reset)*/
+#define	MAL0_TXEOBISR	(MAL_DCR_BASE + 0x06)	/* TX End of buffer int status*/
+#define	MAL0_TXDEIR	(MAL_DCR_BASE + 0x07)	/* TX Descr. Error Int reg */
+#define	MAL0_RXCASR	(MAL_DCR_BASE + 0x10)	/* RX Channel active (set) */
+#define	MAL0_RXCARR	(MAL_DCR_BASE + 0x11)	/* RX Channel active (reset) */
+#define	MAL0_RXEOBISR	(MAL_DCR_BASE + 0x12)	/* RX End of buffer int status*/
+#define	MAL0_RXDEIR	(MAL_DCR_BASE + 0x13)	/* RX Descr. Error Int reg */
+#define	MAL0_TXCTP0R	(MAL_DCR_BASE + 0x20)	/* TX 0 Channel table ptr */
+#define	MAL0_TXCTP1R	(MAL_DCR_BASE + 0x21)	/* TX 1 Channel table ptr */
+#define	MAL0_TXCTP2R	(MAL_DCR_BASE + 0x22)	/* TX 2 Channel table ptr */
+#define	MAL0_TXCTP3R	(MAL_DCR_BASE + 0x23)	/* TX 3 Channel table ptr */
+#define	MAL0_RXCTP0R	(MAL_DCR_BASE + 0x40)	/* RX 0 Channel table ptr */
+#define	MAL0_RXCTP1R	(MAL_DCR_BASE + 0x41)	/* RX 1 Channel table ptr */
+#define	MAL0_RXCTP2R	(MAL_DCR_BASE + 0x42)	/* RX 2 Channel table ptr */
+#define	MAL0_RXCTP3R	(MAL_DCR_BASE + 0x43)	/* RX 3 Channel table ptr */
+#define	MAL0_RXCTP8R	(MAL_DCR_BASE + 0x48)	/* RX 8 Channel table ptr */
+#define	MAL0_RXCTP16R	(MAL_DCR_BASE + 0x50)	/* RX 16 Channel table ptr */
+#define	MAL0_RXCTP24R	(MAL_DCR_BASE + 0x58)	/* RX 24 Channel table ptr */
+#define	MAL0_RCBS0	(MAL_DCR_BASE + 0x60)	/* RX 0 Channel buffer size */
+#define	MAL0_RCBS1	(MAL_DCR_BASE + 0x61)	/* RX 1 Channel buffer size */
+#define	MAL0_RCBS2	(MAL_DCR_BASE + 0x62)	/* RX 2 Channel buffer size */
+#define	MAL0_RCBS3	(MAL_DCR_BASE + 0x63)	/* RX 3 Channel buffer size */
+#define	MAL0_RCBS8	(MAL_DCR_BASE + 0x68)	/* RX 8 Channel buffer size */
+#define	MAL0_RCBS16	(MAL_DCR_BASE + 0x70)	/* RX 16 Channel buffer size */
+#define	MAL0_RCBS24	(MAL_DCR_BASE + 0x78)	/* RX 24 Channel buffer size */
 
 /*-----------------------------------------------------------------------------
 | IIC Register Offsets
@@ -730,27 +603,19 @@
  ******************************************************************************/
 #if defined(CONFIG_405EZ)
 #define OCM_DCR_BASE 0x020
-#define ocmplb3cr1	(OCM_DCR_BASE+0x00)  /* OCM PLB3 Bank 1 Config Reg    */
-#define ocmplb3cr2	(OCM_DCR_BASE+0x01)  /* OCM PLB3 Bank 2 Config Reg    */
-#define ocmplb3bear	(OCM_DCR_BASE+0x02)  /* OCM PLB3 Bus Error Add Reg    */
-#define ocmplb3besr0	(OCM_DCR_BASE+0x03)  /* OCM PLB3 Bus Error Stat Reg 0 */
-#define ocmplb3besr1	(OCM_DCR_BASE+0x04)  /* OCM PLB3 Bus Error Stat Reg 1 */
-#define ocmcid		(OCM_DCR_BASE+0x05)  /* OCM Core ID		      */
-#define ocmrevid	(OCM_DCR_BASE+0x06)  /* OCM Revision ID		      */
-#define ocmplb3dpc	(OCM_DCR_BASE+0x07)  /* OCM PLB3 Data Parity Check    */
-#define ocmdscr1	(OCM_DCR_BASE+0x08)  /* OCM D-side Bank 1 Config Reg  */
-#define ocmdscr2	(OCM_DCR_BASE+0x09)  /* OCM D-side Bank 2 Config Reg  */
-#define ocmiscr1	(OCM_DCR_BASE+0x0A)  /* OCM I-side Bank 1 Config Reg  */
-#define ocmiscr2	(OCM_DCR_BASE+0x0B)  /* OCM I-side Bank 2 Config Reg  */
-#define ocmdsisdpc	(OCM_DCR_BASE+0x0C)  /* OCM D-side/I-side Data Par Chk*/
-#define ocmdsisbear	(OCM_DCR_BASE+0x0D)  /* OCM D-side/I-side Bus Err Addr*/
-#define ocmdsisbesr	(OCM_DCR_BASE+0x0E)  /* OCM D-side/I-side Bus Err Stat*/
+#define OCM0_PLBCR1	(OCM_DCR_BASE + 0x00)	/* OCM PLB3 Bank 1 Config */
+#define OCM0_PLBCR2	(OCM_DCR_BASE + 0x01)	/* OCM PLB3 Bank 2 Config */
+#define OCM0_PLBBEAR	(OCM_DCR_BASE + 0x02)	/* OCM PLB3 Bus Error Add */
+#define OCM0_DSRC1	(OCM_DCR_BASE + 0x08)	/* OCM D-side Bank 1 Config */
+#define OCM0_DSRC2	(OCM_DCR_BASE + 0x09)	/* OCM D-side Bank 2 Config */
+#define OCM0_ISRC1	(OCM_DCR_BASE + 0x0A)	/* OCM I-side Bank 1Config */
+#define OCM0_ISRC2	(OCM_DCR_BASE + 0x0B)	/* OCM I-side Bank 2 Config */
+#define OCM0_DISDPC	(OCM_DCR_BASE + 0x0C)	/* OCM D-/I-side Data Par Chk*/
 #else
 #define OCM_DCR_BASE 0x018
-#define ocmisarc   (OCM_DCR_BASE+0x00)	/* OCM I-side address compare reg    */
-#define ocmiscntl  (OCM_DCR_BASE+0x01)	/* OCM I-side control reg	     */
-#define ocmdsarc   (OCM_DCR_BASE+0x02)	/* OCM D-side address compare reg    */
-#define ocmdscntl  (OCM_DCR_BASE+0x03)	/* OCM D-side control reg	     */
+#define OCM0_ISCNTL	(OCM_DCR_BASE+0x01)	/* OCM I-side control reg */
+#define OCM0_DSARC	(OCM_DCR_BASE+0x02)	/* OCM D-side address compare */
+#define OCM0_DSCNTL	(OCM_DCR_BASE+0x03)	/* OCM D-side control */
 #endif /* CONFIG_405EZ */
 
 /******************************************************************************
@@ -876,9 +741,9 @@
 #define SDR0_SRST_AHB		PPC_REG_VAL(30, 1)
 #define SDR0_SRST_NDFC		PPC_REG_VAL(31, 1)
 
-#define sdr_uart0	0x0120	/* UART0 Config */
-#define sdr_uart1	0x0121	/* UART1 Config */
-#define sdr_mfr		0x4300	/* SDR0_MFR reg */
+#define SDR0_UART0		0x0120	/* UART0 Config */
+#define SDR0_UART1		0x0121	/* UART1 Config */
+#define SDR0_MFR		0x4300	/* SDR0_MFR reg */
 
 /* Defines for CPC0_EPRCSR register */
 #define CPC0_EPRCSR_E0NFE	   0x80000000
@@ -890,18 +755,16 @@
 #define CPC0_EPRCSR_E1PCI	   0x00000002
 #define CPC0_EPRCSR_E0PCI	   0x00000001
 
-#define cpr0_clkupd	0x020
-#define cpr0_pllc	0x040
-#define cpr0_plld	0x060
-#define cpr0_cpud	0x080
-#define cpr0_plbd	0x0a0
-#define cpr0_opbd	0x0c0
-#define cpr0_perd	0x0e0
-#define cpr0_ahbd	0x100
-#define cpr0_icfg	0x140
-
-#define SDR_PINSTP	0x0040
-#define sdr_sdcs	0x0060
+#define CPR0_CLKUPD	0x020
+#define CPR0_PLLC	0x040
+#define CPR0_PLLD	0x060
+#define CPR0_CPUD	0x080
+#define CPR0_PLBD	0x0a0
+#define CPR0_OPBD	0x0c0
+#define CPR0_PERD	0x0e0
+
+#define SDR0_PINSTP	0x0040
+#define SDR0_SDCS0	0x0060
 
 #define SDR0_SDCS_SDD			(0x80000000 >> 31)
 
diff --git a/include/ppc440.h b/include/ppc440.h
index 7f34fda..378a9de 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -58,64 +58,55 @@
  | Clocking Controller
  +----------------------------------------------------------------------------*/
 /* values for clkcfga register - indirect addressing of these regs */
-#define clk_clkukpd	0x0020
-#define clk_pllc	0x0040
-#define clk_plld	0x0060
-#define clk_primad	0x0080
-#define clk_primbd	0x00a0
-#define clk_opbd	0x00c0
-#define clk_perd	0x00e0
-#define clk_mald	0x0100
-#define clk_spcid	0x0120
-#define clk_icfg	0x0140
+#define CPR0_PLLC	0x0040
+#define CPR0_PLLD	0x0060
+#define CPR0_PRIMAD	0x0080
+#define CPR0_PRIMBD	0x00a0
+#define CPR0_OPBD	0x00c0
+#define CPR0_PERD	0x00e0
+#define CPR0_MALD	0x0100
+#define CPR0_SPCID	0x0120
+#define CPR0_ICFG	0x0140
 
 /* 440gx sdr register definations */
-#define sdr_sdstp0	0x0020	    /* */
-#define sdr_sdstp1	0x0021	    /* */
-#define SDR_PINSTP	0x0040
-#define sdr_sdcs	0x0060
-#define sdr_ecid0	0x0080
-#define sdr_ecid1	0x0081
-#define sdr_ecid2	0x0082
-#define sdr_jtag	0x00c0
+#define SDR0_SDSTP0	0x0020	    /* */
+#define SDR0_SDSTP1	0x0021	    /* */
+#define SDR0_PINSTP	0x0040
+#define SDR0_SDCS0	0x0060
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_DDRCFG	0x00e0
 #endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
-#define sdr_ebc		0x0100
-#define sdr_uart0	0x0120	/* UART0 Config */
-#define sdr_uart1	0x0121	/* UART1 Config */
-#define sdr_uart2	0x0122	/* UART2 Config */
-#define sdr_uart3	0x0123	/* UART3 Config */
-#define sdr_cp440	0x0180
-#define sdr_xcr		0x01c0
-#define sdr_xpllc	0x01c1
-#define sdr_xplld	0x01c2
-#define sdr_srst	0x0200
-#define sdr_slpipe	0x0220
-#define sdr_amp0        0x0240  /* Override PLB4 prioritiy for up to 8 masters */
-#define sdr_amp1        0x0241  /* Override PLB3 prioritiy for up to 8 masters */
-#define sdr_mirq0	0x0260
-#define sdr_mirq1	0x0261
-#define sdr_maltbl	0x0280
-#define sdr_malrbl	0x02a0
-#define sdr_maltbs	0x02c0
-#define sdr_malrbs	0x02e0
-#define sdr_pci0	0x0300
-#define sdr_usb0	0x0320
-#define sdr_cust0	0x4000
-#define sdr_cust1	0x4002
-#define sdr_pfc0	0x4100	/* Pin Function 0 */
-#define sdr_pfc1	0x4101	/* Pin Function 1 */
-#define sdr_plbtr	0x4200
-#define sdr_mfr		0x4300	/* SDR0_MFR reg */
+#define SDR0_EBC	0x0100
+#define SDR0_UART0	0x0120	/* UART0 Config */
+#define SDR0_UART1	0x0121	/* UART1 Config */
+#define SDR0_UART2	0x0122	/* UART2 Config */
+#define SDR0_UART3	0x0123	/* UART3 Config */
+#define SDR0_CP440	0x0180
+#define SDR0_XCR	0x01c0
+#define SDR0_XPLLC	0x01c1
+#define SDR0_XPLLD	0x01c2
+#define SDR0_SRST	0x0200
+#define SD0_AMP0        0x0240  /* Override PLB4 prioritiy for up to 8 masters */
+#define SD0_AMP1        0x0241  /* Override PLB3 prioritiy for up to 8 masters */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_PCI0	0x01c0
+#else
+#define SDR0_PCI0	0x0300
+#endif
+#define SDR0_USB0	0x0320
+#define SDR0_CUST0	0x4000
+#define SDR0_CUST1	0x4002
+#define SDR0_PFC0	0x4100	/* Pin Function 0 */
+#define SDR0_PFC1	0x4101	/* Pin Function 1 */
+#define SDR0_MFR	0x4300	/* SDR0_MFR reg */
 
 #ifdef CONFIG_440GX
-#define sdr_amp		0x0240
-#define sdr_xpllc	0x01c1
-#define sdr_xplld	0x01c2
-#define sdr_xcr		0x01c0
-#define sdr_sdstp2	0x4001
-#define sdr_sdstp3	0x4003
+#define SD0_AMP		0x0240
+#define SDR0_XPLLC	0x01c1
+#define SDR0_XPLLD	0x01c2
+#define SDR0_XCR	0x01c0
+#define SDR0_SDSTP2	0x4001
+#define SDR0_SDSTP3	0x4003
 #endif	/* CONFIG_440GX */
 
 /*----------------------------------------------------------------------------+
@@ -143,101 +134,66 @@
 #define MMUCR_STID_MASK		0x000000FF
 
 #ifdef CONFIG_440SPE
-#undef sdr_sdstp2
-#define sdr_sdstp2	0x0022
-#undef sdr_sdstp3
-#define sdr_sdstp3	0x0023
-#define sdr_ddr0	0x00E1
-#define sdr_uart2	0x0122
-#define sdr_xcr0	0x01c0
-/* #define sdr_xcr1	0x01c3	only one PCIX - SG */
-/* #define sdr_xcr2	0x01c6	only one PCIX - SG */
-#define sdr_xpllc0	0x01c1
-#define sdr_xplld0	0x01c2
-#define sdr_xpllc1	0x01c4	/*notRCW  - SG */
-#define sdr_xplld1	0x01c5	/*notRCW  - SG */
-#define sdr_xpllc2	0x01c7	/*notRCW  - SG */
-#define sdr_xplld2	0x01c8	/*notRCW  - SG */
-#define sdr_amp0	0x0240
-#define sdr_amp1	0x0241
-#define sdr_cust2	0x4004
-#define sdr_cust3	0x4006
-#define sdr_sdstp4	0x4001
-#define sdr_sdstp5	0x4003
-#define sdr_sdstp6	0x4005
-#define sdr_sdstp7	0x4007
+#undef SDR0_SDSTP2
+#define SDR0_SDSTP2	0x0022
+#undef SDR0_SDSTP3
+#define SDR0_SDSTP3	0x0023
+#define SDR0_DDR0	0x00E1
+#define SDR0_UART2	0x0122
+#define SDR0_XCR0	0x01c0
+#define SDR0_XCR1	0x01c3
+#define SDR0_XCR2	0x01c6
+#define SDR0_XPLLC0	0x01c1
+#define SDR0_XPLLD0	0x01c2
+#define SDR0_XPLLC1	0x01c4	/*notRCW  - SG */
+#define SDR0_XPLLD1	0x01c5	/*notRCW  - SG */
+#define SDR0_XPLLC2	0x01c7	/*notRCW  - SG */
+#define SDR0_XPLLD2	0x01c8	/*notRCW  - SG */
+#define SD0_AMP0	0x0240
+#define SD0_AMP1	0x0241
+#define SDR0_CUST2	0x4004
+#define SDR0_CUST3	0x4006
+#define SDR0_SDSTP4	0x4001
+#define SDR0_SDSTP5	0x4003
+#define SDR0_SDSTP6	0x4005
+#define SDR0_SDSTP7	0x4007
 
 #endif /* CONFIG_440SPE */
 
 /*-----------------------------------------------------------------------------
  | External Bus Controller
  +----------------------------------------------------------------------------*/
-/* values for ebccfga register - indirect addressing of these regs */
-#define pb0cr		0x00	/* periph bank 0 config reg		*/
-#define pb1cr		0x01	/* periph bank 1 config reg		*/
-#define pb2cr		0x02	/* periph bank 2 config reg		*/
-#define pb3cr		0x03	/* periph bank 3 config reg		*/
-#define pb4cr		0x04	/* periph bank 4 config reg		*/
-#define pb5cr		0x05	/* periph bank 5 config reg		*/
-#define pb6cr		0x06	/* periph bank 6 config reg		*/
-#define pb7cr		0x07	/* periph bank 7 config reg		*/
-#define pb0ap		0x10	/* periph bank 0 access parameters	*/
-#define pb1ap		0x11	/* periph bank 1 access parameters	*/
-#define pb2ap		0x12	/* periph bank 2 access parameters	*/
-#define pb3ap		0x13	/* periph bank 3 access parameters	*/
-#define pb4ap		0x14	/* periph bank 4 access parameters	*/
-#define pb5ap		0x15	/* periph bank 5 access parameters	*/
-#define pb6ap		0x16	/* periph bank 6 access parameters	*/
-#define pb7ap		0x17	/* periph bank 7 access parameters	*/
-#define pbear		0x20	/* periph bus error addr reg		*/
-#define pbesr		0x21	/* periph bus error status reg		*/
-#define xbcfg		0x23	/* external bus configuration reg	*/
+/* values for EBC0_CFGADDR register - indirect addressing of these regs */
+#define PB0CR		0x00	/* periph bank 0 config reg		*/
+#define PB1CR		0x01	/* periph bank 1 config reg		*/
+#define PB2CR		0x02	/* periph bank 2 config reg		*/
+#define PB3CR		0x03	/* periph bank 3 config reg		*/
+#define PB4CR		0x04	/* periph bank 4 config reg		*/
+#define PB5CR		0x05	/* periph bank 5 config reg		*/
+#define PB6CR		0x06	/* periph bank 6 config reg		*/
+#define PB7CR		0x07	/* periph bank 7 config reg		*/
+#define PB0AP		0x10	/* periph bank 0 access parameters	*/
+#define PB1AP		0x11	/* periph bank 1 access parameters	*/
+#define PB2AP		0x12	/* periph bank 2 access parameters	*/
+#define PB3AP		0x13	/* periph bank 3 access parameters	*/
+#define PB4AP		0x14	/* periph bank 4 access parameters	*/
+#define PB5AP		0x15	/* periph bank 5 access parameters	*/
+#define PB6AP		0x16	/* periph bank 6 access parameters	*/
+#define PB7AP		0x17	/* periph bank 7 access parameters	*/
+#define PBEAR		0x20	/* periph bus error addr reg		*/
+#define PBESR		0x21	/* periph bus error status reg		*/
 #define EBC0_CFG	0x23	/* external bus configuration reg	*/
-#define xbcid		0x24	/* external bus core id reg		*/
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 
-/* PLB4 to PLB3 Bridge OUT */
-#define P4P3_DCR_BASE           0x020
-#define p4p3_esr0_read          (P4P3_DCR_BASE+0x0)
-#define p4p3_esr0_write         (P4P3_DCR_BASE+0x1)
-#define p4p3_eadr               (P4P3_DCR_BASE+0x2)
-#define p4p3_euadr              (P4P3_DCR_BASE+0x3)
-#define p4p3_esr1_read          (P4P3_DCR_BASE+0x4)
-#define p4p3_esr1_write         (P4P3_DCR_BASE+0x5)
-#define p4p3_confg              (P4P3_DCR_BASE+0x6)
-#define p4p3_pic                (P4P3_DCR_BASE+0x7)
-#define p4p3_peir               (P4P3_DCR_BASE+0x8)
-#define p4p3_rev                (P4P3_DCR_BASE+0xA)
-
-/* PLB3 to PLB4 Bridge IN */
-#define P3P4_DCR_BASE           0x030
-#define p3p4_esr0_read          (P3P4_DCR_BASE+0x0)
-#define p3p4_esr0_write         (P3P4_DCR_BASE+0x1)
-#define p3p4_eadr               (P3P4_DCR_BASE+0x2)
-#define p3p4_euadr              (P3P4_DCR_BASE+0x3)
-#define p3p4_esr1_read          (P3P4_DCR_BASE+0x4)
-#define p3p4_esr1_write         (P3P4_DCR_BASE+0x5)
-#define p3p4_confg              (P3P4_DCR_BASE+0x6)
-#define p3p4_pic                (P3P4_DCR_BASE+0x7)
-#define p3p4_peir               (P3P4_DCR_BASE+0x8)
-#define p3p4_rev                (P3P4_DCR_BASE+0xA)
-
 /* PLB3 Arbiter */
-#define PLB3_DCR_BASE           0x070
-#define plb3_revid              (PLB3_DCR_BASE+0x2)
-#define plb3_besr               (PLB3_DCR_BASE+0x3)
-#define plb3_bear               (PLB3_DCR_BASE+0x6)
-#define plb3_acr                (PLB3_DCR_BASE+0x7)
+#define PLB3_DCR_BASE		0x070
+#define PLB3_ACR		(PLB3_DCR_BASE + 0x7)
 
 /* PLB4 Arbiter - PowerPC440EP Pass1 */
-#define PLB4_DCR_BASE           0x080
-#define plb4_acr                (PLB4_DCR_BASE+0x1)
-#define plb4_revid              (PLB4_DCR_BASE+0x2)
-#define plb4_besr               (PLB4_DCR_BASE+0x4)
-#define plb4_bearl              (PLB4_DCR_BASE+0x6)
-#define plb4_bearh              (PLB4_DCR_BASE+0x7)
+#define PLB4_DCR_BASE		0x080
+#define PLB4_ACR		(PLB4_DCR_BASE + 0x1)
 
 #define PLB4_ACR_WRP		(0x80000000 >> 7)
 
@@ -578,24 +534,16 @@
 #define CNTRL_DCR_BASE 0x0b0
 #endif
 
-#define cpc0_er		(CNTRL_DCR_BASE+0x00)	/* CPM enable register		*/
-#define cpc0_fr		(CNTRL_DCR_BASE+0x01)	/* CPM force register		*/
-#define cpc0_sr		(CNTRL_DCR_BASE+0x02)	/* CPM status register		*/
-
-#define cpc0_sys0	(CNTRL_DCR_BASE+0x30)	/* System configuration reg 0	*/
-#define cpc0_sys1	(CNTRL_DCR_BASE+0x31)	/* System configuration reg 1	*/
-#define cpc0_cust0	(CNTRL_DCR_BASE+0x32)	/* Customer configuration reg 0 */
-#define cpc0_cust1	(CNTRL_DCR_BASE+0x33)	/* Customer configuration reg 1 */
+#define CPC0_SYS0	(CNTRL_DCR_BASE+0x30)	/* System configuration reg 0	*/
+#define CPC0_SYS1	(CNTRL_DCR_BASE+0x31)	/* System configuration reg 1	*/
 
-#define cpc0_strp0	(CNTRL_DCR_BASE+0x34)	/* Power-on config reg 0 (RO)	*/
-#define cpc0_strp1	(CNTRL_DCR_BASE+0x35)	/* Power-on config reg 1 (RO)	*/
-#define cpc0_strp2	(CNTRL_DCR_BASE+0x36)	/* Power-on config reg 2 (RO)	*/
-#define cpc0_strp3	(CNTRL_DCR_BASE+0x37)	/* Power-on config reg 3 (RO)	*/
+#define CPC0_STRP0	(CNTRL_DCR_BASE+0x34)	/* Power-on config reg 0 (RO)	*/
+#define CPC0_STRP1	(CNTRL_DCR_BASE+0x35)	/* Power-on config reg 1 (RO)	*/
 
-#define cpc0_gpio	(CNTRL_DCR_BASE+0x38)	/* GPIO config reg (440GP)	*/
+#define CPC0_GPIO	(CNTRL_DCR_BASE+0x38)	/* GPIO config reg (440GP)	*/
 
-#define cntrl0		(CNTRL_DCR_BASE+0x3b)	/* Control 0 register		*/
-#define cntrl1		(CNTRL_DCR_BASE+0x3a)	/* Control 1 register		*/
+#define CPC0_CR0		(CNTRL_DCR_BASE+0x3b)	/* Control 0 register		*/
+#define CPC0_CR1		(CNTRL_DCR_BASE+0x3a)	/* Control 1 register		*/
 
 /*-----------------------------------------------------------------------------
  | DMA
@@ -605,91 +553,59 @@
 #else
 #define DMA_DCR_BASE 0x100
 #endif
-#define dmacr0	(DMA_DCR_BASE+0x00)  /* DMA channel control register 0	     */
-#define dmact0	(DMA_DCR_BASE+0x01)  /* DMA count register 0		     */
-#define dmasah0 (DMA_DCR_BASE+0x02)  /* DMA source address high 0	     */
-#define dmasal0 (DMA_DCR_BASE+0x03)  /* DMA source address low 0	     */
-#define dmadah0 (DMA_DCR_BASE+0x04)  /* DMA destination address high 0	     */
-#define dmadal0 (DMA_DCR_BASE+0x05)  /* DMA destination address low 0	     */
-#define dmasgh0 (DMA_DCR_BASE+0x06)  /* DMA scatter/gather desc addr high 0  */
-#define dmasgl0 (DMA_DCR_BASE+0x07)  /* DMA scatter/gather desc addr low 0   */
-#define dmacr1	(DMA_DCR_BASE+0x08)  /* DMA channel control register 1	     */
-#define dmact1	(DMA_DCR_BASE+0x09)  /* DMA count register 1		     */
-#define dmasah1 (DMA_DCR_BASE+0x0a)  /* DMA source address high 1	     */
-#define dmasal1 (DMA_DCR_BASE+0x0b)  /* DMA source address low 1	     */
-#define dmadah1 (DMA_DCR_BASE+0x0c)  /* DMA destination address high 1	     */
-#define dmadal1 (DMA_DCR_BASE+0x0d)  /* DMA destination address low 1	     */
-#define dmasgh1 (DMA_DCR_BASE+0x0e)  /* DMA scatter/gather desc addr high 1  */
-#define dmasgl1 (DMA_DCR_BASE+0x0f)  /* DMA scatter/gather desc addr low 1   */
-#define dmacr2	(DMA_DCR_BASE+0x10)  /* DMA channel control register 2	     */
-#define dmact2	(DMA_DCR_BASE+0x11)  /* DMA count register 2		     */
-#define dmasah2 (DMA_DCR_BASE+0x12)  /* DMA source address high 2	     */
-#define dmasal2 (DMA_DCR_BASE+0x13)  /* DMA source address low 2	     */
-#define dmadah2 (DMA_DCR_BASE+0x14)  /* DMA destination address high 2	     */
-#define dmadal2 (DMA_DCR_BASE+0x15)  /* DMA destination address low 2	     */
-#define dmasgh2 (DMA_DCR_BASE+0x16)  /* DMA scatter/gather desc addr high 2  */
-#define dmasgl2 (DMA_DCR_BASE+0x17)  /* DMA scatter/gather desc addr low 2   */
-#define dmacr3	(DMA_DCR_BASE+0x18)  /* DMA channel control register 2	     */
-#define dmact3	(DMA_DCR_BASE+0x19)  /* DMA count register 2		     */
-#define dmasah3 (DMA_DCR_BASE+0x1a)  /* DMA source address high 2	     */
-#define dmasal3 (DMA_DCR_BASE+0x1b)  /* DMA source address low 2	     */
-#define dmadah3 (DMA_DCR_BASE+0x1c)  /* DMA destination address high 2	     */
-#define dmadal3 (DMA_DCR_BASE+0x1d)  /* DMA destination address low 2	     */
-#define dmasgh3 (DMA_DCR_BASE+0x1e)  /* DMA scatter/gather desc addr high 2  */
-#define dmasgl3 (DMA_DCR_BASE+0x1f)  /* DMA scatter/gather desc addr low 2   */
-#define dmasr	(DMA_DCR_BASE+0x20)  /* DMA status register		     */
-#define dmasgc	(DMA_DCR_BASE+0x23)  /* DMA scatter/gather command register  */
-#define dmaslp	(DMA_DCR_BASE+0x25)  /* DMA sleep mode register		     */
-#define dmapol	(DMA_DCR_BASE+0x26)  /* DMA polarity configuration register  */
+#define DMACR0	(DMA_DCR_BASE+0x00)  /* DMA channel control register 0	     */
+#define DMACT0	(DMA_DCR_BASE+0x01)  /* DMA count register 0		     */
+#define DMACR1	(DMA_DCR_BASE+0x08)  /* DMA channel control register 1	     */
+#define DMACT1	(DMA_DCR_BASE+0x09)  /* DMA count register 1		     */
+#define DMACR2	(DMA_DCR_BASE+0x10)  /* DMA channel control register 2	     */
+#define DMACT2	(DMA_DCR_BASE+0x11)  /* DMA count register 2		     */
+#define DMACR3	(DMA_DCR_BASE+0x18)  /* DMA channel control register 2	     */
+#define DMASR	(DMA_DCR_BASE+0x20)  /* DMA status register		     */
+#define DMASGC	(DMA_DCR_BASE+0x23)  /* DMA scatter/gather command register  */
 
 /*-----------------------------------------------------------------------------
  | Memory Access Layer
  +----------------------------------------------------------------------------*/
 #define MAL_DCR_BASE 0x180
-#define malmcr	    (MAL_DCR_BASE+0x00) /* MAL Config reg		    */
-#define malesr	    (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear)    */
-#define malier	    (MAL_DCR_BASE+0x02) /* Interrupt enable reg		    */
-#define maldbr	    (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only)	    */
-#define maltxcasr   (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)	    */
-#define maltxcarr   (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset)    */
-#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg  */
-#define maltxdeir   (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg	    */
-#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg		    */
-#define maltxbattr  (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg	    */
-#define malrxcasr   (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)	    */
-#define malrxcarr   (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset)    */
-#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg  */
-#define malrxdeir   (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg	    */
-#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg		    */
-#define malrxbattr  (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg	    */
-#define maltxctp0r  (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg   */
-#define maltxctp1r  (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg   */
-#define maltxctp2r  (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg   */
-#define maltxctp3r  (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg   */
-#define malrxctp0r  (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg   */
-#define malrxctp1r  (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg   */
-#define malrcbs0    (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg	    */
-#define malrcbs1    (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg	    */
+#define MAL0_CFG	(MAL_DCR_BASE + 0x00)	/* MAL Config reg	*/
+#define MAL0_ESR	(MAL_DCR_BASE + 0x01)	/* Error Status (Read/Clear) */
+#define MAL0_IER	(MAL_DCR_BASE + 0x02)	/* Interrupt enable */
+#define MAL0_TXCASR	(MAL_DCR_BASE + 0x04)	/* TX Channel active (set) */
+#define MAL0_TXCARR	(MAL_DCR_BASE + 0x05)	/* TX Channel active (reset) */
+#define MAL0_TXEOBISR	(MAL_DCR_BASE + 0x06)	/* TX End of buffer int status */
+#define MAL0_TXDEIR	(MAL_DCR_BASE + 0x07)	/* TX Descr. Error Int */
+#define MAL0_TXBADDR	(MAL_DCR_BASE + 0x09)	/* TX descriptor base addr*/
+#define MAL0_RXCASR	(MAL_DCR_BASE + 0x10)	/* RX Channel active (set) */
+#define MAL0_RXCARR	(MAL_DCR_BASE + 0x11)	/* RX Channel active (reset) */
+#define MAL0_RXEOBISR	(MAL_DCR_BASE + 0x12)	/* RX End of buffer int status */
+#define MAL0_RXDEIR	(MAL_DCR_BASE + 0x13)	/* RX Descr. Error Int */
+#define MAL0_RXBADDR	(MAL_DCR_BASE + 0x15)	/* RX descriptor base addr */
+#define MAL0_TXCTP0R	(MAL_DCR_BASE + 0x20)	/* TX 0 Channel table pointer */
+#define MAL0_TXCTP1R	(MAL_DCR_BASE + 0x21)	/* TX 1 Channel table pointer */
+#define MAL0_TXCTP2R	(MAL_DCR_BASE + 0x22)	/* TX 2 Channel table pointer */
+#define MAL0_TXCTP3R	(MAL_DCR_BASE + 0x23)	/* TX 3 Channel table pointer */
+#define MAL0_RXCTP0R	(MAL_DCR_BASE + 0x40)	/* RX 0 Channel table pointer */
+#define MAL0_RXCTP1R	(MAL_DCR_BASE + 0x41)	/* RX 1 Channel table pointer */
+#define MAL0_RCBS0	(MAL_DCR_BASE + 0x60)	/* RX 0 Channel buffer size */
+#define MAL0_RCBS1	(MAL_DCR_BASE + 0x61)	/* RX 1 Channel buffer size */
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define malrxctp2r  (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg   */
-#define malrxctp3r  (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg   */
-#define malrxctp8r  (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg   */
-#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg  */
-#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg  */
-#define malrcbs2    (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg	    */
-#define malrcbs3    (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg	    */
-#define malrcbs8    (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg	    */
-#define malrcbs16   (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg    */
-#define malrcbs24   (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg    */
+#define MAL0_RXCTP2R	(MAL_DCR_BASE + 0x42)	/* RX 2 Channel table pointer */
+#define MAL0_RXCTP3R	(MAL_DCR_BASE + 0x43)	/* RX 3 Channel table pointer */
+#define MAL0_RXCTP8R	(MAL_DCR_BASE + 0x48)	/* RX 8 Channel table pointer */
+#define MAL0_RXCTP16R	(MAL_DCR_BASE + 0x50)	/* RX 16 Channel table pointer*/
+#define MAL0_RXCTP24R	(MAL_DCR_BASE + 0x58)	/* RX 24 Channel table pointer*/
+#define MAL0_RCBS2	(MAL_DCR_BASE + 0x62)	/* RX 2 Channel buffer size */
+#define MAL0_RCBS3	(MAL_DCR_BASE + 0x63)	/* RX 3 Channel buffer size */
+#define MAL0_RCBS8	(MAL_DCR_BASE + 0x68)	/* RX 8 Channel buffer size */
+#define MAL0_RCBS16	(MAL_DCR_BASE + 0x70)	/* RX 16 Channel buffer size */
+#define MAL0_RCBS24	(MAL_DCR_BASE + 0x78)	/* RX 24 Channel buffer size */
 #endif /* CONFIG_440GX */
 
 /*-----------------------------------------------------------------------------+
 |  SDR0 Bit Settings
 +-----------------------------------------------------------------------------*/
 #if defined(CONFIG_440SP)
-#define SDR0_SRST			0x0200
-
 #define SDR0_DDR0			0x00E1
 #define SDR0_DDR0_DPLLRST		0x80000000
 #define SDR0_DDR0_DDRM_MASK		0x60000000
@@ -923,79 +839,6 @@
 #define SDR0_UART0			0x0120
 #define SDR0_UART1			0x0121
 #define SDR0_UART2			0x0122
-#define SDR0_UARTX_UXICS_MASK		0xF0000000
-#define SDR0_UARTX_UXICS_PLB		0x20000000
-#define SDR0_UARTX_UXEC_MASK		0x00800000
-#define SDR0_UARTX_UXEC_INT		0x00000000
-#define SDR0_UARTX_UXEC_EXT		0x00800000
-#define SDR0_UARTX_UXDIV_MASK		0x000000FF
-#define SDR0_UARTX_UXDIV_ENCODE(n)	((((unsigned long)(n))&0xFF)<<0)
-#define SDR0_UARTX_UXDIV_DECODE(n)	((((((unsigned long)(n))>>0)-1)&0xFF)+1)
-
-#define SDR0_CP440			0x0180
-#define SDR0_CP440_ERPN_MASK		0x30000000
-#define SDR0_CP440_ERPN_MASK_HI		0x3000
-#define SDR0_CP440_ERPN_MASK_LO		0x0000
-#define SDR0_CP440_ERPN_EBC		0x10000000
-#define SDR0_CP440_ERPN_EBC_HI		0x1000
-#define SDR0_CP440_ERPN_EBC_LO		0x0000
-#define SDR0_CP440_ERPN_PCI		0x20000000
-#define SDR0_CP440_ERPN_PCI_HI		0x2000
-#define SDR0_CP440_ERPN_PCI_LO		0x0000
-#define SDR0_CP440_ERPN_ENCODE(n)	((((unsigned long)(n))&0x03)<<28)
-#define SDR0_CP440_ERPN_DECODE(n)	((((unsigned long)(n))>>28)&0x03)
-#define SDR0_CP440_NTO1_MASK		0x00000002
-#define SDR0_CP440_NTO1_NTOP		0x00000000
-#define SDR0_CP440_NTO1_NTO1		0x00000002
-#define SDR0_CP440_NTO1_ENCODE(n)	((((unsigned long)(n))&0x01)<<1)
-#define SDR0_CP440_NTO1_DECODE(n)	((((unsigned long)(n))>>1)&0x01)
-
-#define SDR0_XCR0			0x01C0
-#define SDR0_XCR1			0x01C3
-#define SDR0_XCR2			0x01C6
-#define SDR0_XCRn_PAE_MASK		0x80000000
-#define SDR0_XCRn_PAE_DISABLE		0x00000000
-#define SDR0_XCRn_PAE_ENABLE		0x80000000
-#define SDR0_XCRn_PAE_ENCODE(n)		((((unsigned long)(n))&0x01)<<31)
-#define SDR0_XCRn_PAE_DECODE(n)		((((unsigned long)(n))>>31)&0x01)
-#define SDR0_XCRn_PHCE_MASK		0x40000000
-#define SDR0_XCRn_PHCE_DISABLE		0x00000000
-#define SDR0_XCRn_PHCE_ENABLE		0x40000000
-#define SDR0_XCRn_PHCE_ENCODE(n)	((((unsigned long)(n))&0x01)<<30)
-#define SDR0_XCRn_PHCE_DECODE(n)	((((unsigned long)(n))>>30)&0x01)
-#define SDR0_XCRn_PISE_MASK		0x20000000
-#define SDR0_XCRn_PISE_DISABLE		0x00000000
-#define SDR0_XCRn_PISE_ENABLE		0x20000000
-#define SDR0_XCRn_PISE_ENCODE(n)	((((unsigned long)(n))&0x01)<<29)
-#define SDR0_XCRn_PISE_DECODE(n)	((((unsigned long)(n))>>29)&0x01)
-#define SDR0_XCRn_PCWE_MASK		0x10000000
-#define SDR0_XCRn_PCWE_DISABLE		0x00000000
-#define SDR0_XCRn_PCWE_ENABLE		0x10000000
-#define SDR0_XCRn_PCWE_ENCODE(n)	((((unsigned long)(n))&0x01)<<28)
-#define SDR0_XCRn_PCWE_DECODE(n)	((((unsigned long)(n))>>28)&0x01)
-#define SDR0_XCRn_PPIM_MASK		0x0F000000
-#define SDR0_XCRn_PPIM_ENCODE(n)	((((unsigned long)(n))&0x0F)<<24)
-#define SDR0_XCRn_PPIM_DECODE(n)	((((unsigned long)(n))>>24)&0x0F)
-#define SDR0_XCRn_PR64E_MASK		0x00800000
-#define SDR0_XCRn_PR64E_DISABLE		0x00000000
-#define SDR0_XCRn_PR64E_ENABLE		0x00800000
-#define SDR0_XCRn_PR64E_ENCODE(n)	((((unsigned long)(n))&0x01)<<23)
-#define SDR0_XCRn_PR64E_DECODE(n)	((((unsigned long)(n))>>23)&0x01)
-#define SDR0_XCRn_PXFS_MASK		0x00600000
-#define SDR0_XCRn_PXFS_100_133		0x00000000
-#define SDR0_XCRn_PXFS_66_100		0x00200000
-#define SDR0_XCRn_PXFS_50_66		0x00400000
-#define SDR0_XCRn_PXFS_0_33		0x00600000
-#define SDR0_XCRn_PXFS_ENCODE(n)	((((unsigned long)(n))&0x03)<<21)
-#define SDR0_XCRn_PXFS_DECODE(n)	((((unsigned long)(n))>>21)&0x03)
-
-#define SDR0_XPLLC0			0x01C1
-#define SDR0_XPLLD0			0x01C2
-#define SDR0_XPLLC1			0x01C4
-#define SDR0_XPLLD1			0x01C5
-#define SDR0_XPLLC2			0x01C7
-#define SDR0_XPLLD2			0x01C8
-#define SDR0_SRST			0x0200
 #define SDR0_SLPIPE			0x0220
 
 #define SDR0_AMP0			0x0240
@@ -1544,8 +1387,7 @@
 
 #elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
 
-#define SDR0_SRST0		0x0200
-#define SDR0_SRST		SDR0_SRST0 /* for compatability reasons */
+#define SDR0_SRST0		SDR0_SRST  /* for compatability reasons */
 #define SDR0_SRST0_BGO		0x80000000 /* PLB to OPB bridge */
 #define SDR0_SRST0_PLB4		0x40000000 /* PLB4 arbiter */
 #define SDR0_SRST0_EBC		0x20000000 /* External bus controller */
@@ -1607,8 +1449,6 @@
 #define SDR0_SRST1_AHBICM	0x00000002 /* AHB inter-connect matrix */
 #define SDR0_SRST1_SATA		0x00000001 /* Serial ATA controller */
 
-#define SDR0_PCI0		0x1c0		/* PCI Configuration Register */
-
 #else
 
 #define SDR0_SRST_BGO			0x80000000
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index a9954aa..086f8fb 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -65,49 +65,37 @@
 
 #define PLB_ARBITER_BASE		0x80
 
-#define plb0_revid			(PLB_ARBITER_BASE + 0x00)
-#define plb0_acr			(PLB_ARBITER_BASE + 0x01)
-#define plb0_acr_ppm_mask		0xF0000000
-#define plb0_acr_ppm_fixed		0x00000000
-#define plb0_acr_ppm_fair		0xD0000000
-#define plb0_acr_hbu_mask		0x08000000
-#define plb0_acr_hbu_disabled		0x00000000
-#define plb0_acr_hbu_enabled		0x08000000
-#define plb0_acr_rdp_mask		0x06000000
-#define plb0_acr_rdp_disabled		0x00000000
-#define plb0_acr_rdp_2deep		0x02000000
-#define plb0_acr_rdp_3deep		0x04000000
-#define plb0_acr_rdp_4deep		0x06000000
-#define plb0_acr_wrp_mask		0x01000000
-#define plb0_acr_wrp_disabled		0x00000000
-#define plb0_acr_wrp_2deep		0x01000000
-
-#define plb0_besrl			(PLB_ARBITER_BASE + 0x02)
-#define plb0_besrh			(PLB_ARBITER_BASE + 0x03)
-#define plb0_bearl			(PLB_ARBITER_BASE + 0x04)
-#define plb0_bearh			(PLB_ARBITER_BASE + 0x05)
-#define plb0_ccr			(PLB_ARBITER_BASE + 0x08)
-
-#define plb1_acr			(PLB_ARBITER_BASE + 0x09)
-#define plb1_acr_ppm_mask		0xF0000000
-#define plb1_acr_ppm_fixed		0x00000000
-#define plb1_acr_ppm_fair		0xD0000000
-#define plb1_acr_hbu_mask		0x08000000
-#define plb1_acr_hbu_disabled		0x00000000
-#define plb1_acr_hbu_enabled		0x08000000
-#define plb1_acr_rdp_mask		0x06000000
-#define plb1_acr_rdp_disabled		0x00000000
-#define plb1_acr_rdp_2deep		0x02000000
-#define plb1_acr_rdp_3deep		0x04000000
-#define plb1_acr_rdp_4deep		0x06000000
-#define plb1_acr_wrp_mask		0x01000000
-#define plb1_acr_wrp_disabled		0x00000000
-#define plb1_acr_wrp_2deep		0x01000000
-
-#define plb1_besrl			(PLB_ARBITER_BASE + 0x0A)
-#define plb1_besrh			(PLB_ARBITER_BASE + 0x0B)
-#define plb1_bearl			(PLB_ARBITER_BASE + 0x0C)
-#define plb1_bearh			(PLB_ARBITER_BASE + 0x0D)
+#define PLB0_ACR			(PLB_ARBITER_BASE + 0x01)
+#define PLB0_ACR_PPM_MASK		0xF0000000
+#define PLB0_ACR_PPM_FIXED		0x00000000
+#define PLB0_ACR_PPM_FAIR		0xD0000000
+#define PLB0_ACR_HBU_MASK		0x08000000
+#define PLB0_ACR_HBU_DISABLED		0x00000000
+#define PLB0_ACR_HBU_ENABLED		0x08000000
+#define PLB0_ACR_RDP_MASK		0x06000000
+#define PLB0_ACR_RDP_DISABLED		0x00000000
+#define PLB0_ACR_RDP_2DEEP		0x02000000
+#define PLB0_ACR_RDP_3DEEP		0x04000000
+#define PLB0_ACR_RDP_4DEEP		0x06000000
+#define PLB0_ACR_WRP_MASK		0x01000000
+#define PLB0_ACR_WRP_DISABLED		0x00000000
+#define PLB0_ACR_WRP_2DEEP		0x01000000
+
+#define PLB1_ACR			(PLB_ARBITER_BASE + 0x09)
+#define PLB1_ACR_PPM_MASK		0xF0000000
+#define PLB1_ACR_PPM_FIXED		0x00000000
+#define PLB1_ACR_PPM_FAIR		0xD0000000
+#define PLB1_ACR_HBU_MASK		0x08000000
+#define PLB1_ACR_HBU_DISABLED		0x00000000
+#define PLB1_ACR_HBU_ENABLED		0x08000000
+#define PLB1_ACR_RDP_MASK		0x06000000
+#define PLB1_ACR_RDP_DISABLED		0x00000000
+#define PLB1_ACR_RDP_2DEEP		0x02000000
+#define PLB1_ACR_RDP_3DEEP		0x04000000
+#define PLB1_ACR_RDP_4DEEP		0x06000000
+#define PLB1_ACR_WRP_MASK		0x01000000
+#define PLB1_ACR_WRP_DISABLED		0x00000000
+#define PLB1_ACR_WRP_2DEEP		0x01000000
 
 #endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/
 
@@ -156,35 +144,35 @@
 						     line aligned data. */
 
 #define CPR0_DCR_BASE	0x0C
-#define cprcfga		(CPR0_DCR_BASE+0x0)
-#define cprcfgd		(CPR0_DCR_BASE+0x1)
+#define CPR0_CFGADDR	(CPR0_DCR_BASE + 0x0)
+#define CPR0_CFGDATA	(CPR0_DCR_BASE + 0x1)
 
 #define SDR_DCR_BASE	0x0E
-#define sdrcfga		(SDR_DCR_BASE+0x0)
-#define sdrcfgd		(SDR_DCR_BASE+0x1)
+#define SDR0_CFGADDR	(SDR_DCR_BASE + 0x0)
+#define SDR0_CFGDATA	(SDR_DCR_BASE + 0x1)
 
 #define SDRAM_DCR_BASE	0x10
-#define memcfga		(SDRAM_DCR_BASE+0x0)
-#define memcfgd		(SDRAM_DCR_BASE+0x1)
+#define SDRAM0_CFGADDR	(SDRAM_DCR_BASE + 0x0)
+#define SDRAM0_CFGDATA	(SDRAM_DCR_BASE + 0x1)
 
 #define EBC_DCR_BASE	0x12
-#define ebccfga		(EBC_DCR_BASE+0x0)
-#define ebccfgd		(EBC_DCR_BASE+0x1)
+#define EBC0_CFGADDR	(EBC_DCR_BASE + 0x0)
+#define EBC0_CFGDATA	(EBC_DCR_BASE + 0x1)
 
 /*
  * Macros for indirect DCR access
  */
-#define mtcpr(reg, d)	do { mtdcr(cprcfga,reg);mtdcr(cprcfgd,d); } while (0)
-#define mfcpr(reg, d)	do { mtdcr(cprcfga,reg);d = mfdcr(cprcfgd); } while (0)
+#define mtcpr(reg, d)	do { mtdcr(CPR0_CFGADDR,reg);mtdcr(CPR0_CFGDATA,d); } while (0)
+#define mfcpr(reg, d)	do { mtdcr(CPR0_CFGADDR,reg);d = mfdcr(CPR0_CFGDATA); } while (0)
 
-#define mtebc(reg, d)	do { mtdcr(ebccfga,reg);mtdcr(ebccfgd,d); } while (0)
-#define mfebc(reg, d)	do { mtdcr(ebccfga,reg);d = mfdcr(ebccfgd); } while (0)
+#define mtebc(reg, d)	do { mtdcr(EBC0_CFGADDR,reg);mtdcr(EBC0_CFGDATA,d); } while (0)
+#define mfebc(reg, d)	do { mtdcr(EBC0_CFGADDR,reg);d = mfdcr(EBC0_CFGDATA); } while (0)
 
-#define mtsdram(reg, d)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,d); } while (0)
-#define mfsdram(reg, d)	do { mtdcr(memcfga,reg);d = mfdcr(memcfgd); } while (0)
+#define mtsdram(reg, d)	do { mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,d); } while (0)
+#define mfsdram(reg, d)	do { mtdcr(SDRAM0_CFGADDR,reg);d = mfdcr(SDRAM0_CFGDATA); } while (0)
 
-#define mtsdr(reg, d)	do { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,d); } while (0)
-#define mfsdr(reg, d)	do { mtdcr(sdrcfga,reg);d = mfdcr(sdrcfgd); } while (0)
+#define mtsdr(reg, d)	do { mtdcr(SDR0_CFGADDR,reg);mtdcr(SDR0_CFGDATA,d); } while (0)
+#define mfsdr(reg, d)	do { mtdcr(SDR0_CFGADDR,reg);d = mfdcr(SDR0_CFGDATA); } while (0)
 
 #ifndef __ASSEMBLY__
 
diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c
index 54be256..df03afe 100644
--- a/nand_spl/board/amcc/bamboo/sdram.c
+++ b/nand_spl/board/amcc/bamboo/sdram.c
@@ -56,8 +56,8 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
-	mtsdr(sdr_srst, SDR0_SRST_DMC);
-	mtsdr(sdr_srst, 0x00000000);
+	mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+	mtsdr(SDR0_SRST, 0x00000000);
 
 	/*
 	 * Disable memory controller.
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index e40e19b..c3665da 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -109,9 +109,9 @@ static void ether_post_init (int devnum, int hw_addr)
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* provide clocks for EMAC internal loopback  */
-	mfsdr (sdr_mfr, mfr);
+	mfsdr (SDR0_MFR, mfr);
 	mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
-	mtsdr (sdr_mfr, mfr);
+	mtsdr (SDR0_MFR, mfr);
 	sync ();
 #endif
 	/* reset emac */
@@ -150,13 +150,13 @@ static void ether_post_init (int devnum, int hw_addr)
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
 	       MAL_CR_PLBLT_DEFAULT | 0x00330000);
 #else
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
 	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
 	if (get_pvr() == PVR_440GP_RB) {
-		mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
+		mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
 	}
 #endif
 	/* setup buffer descriptors */
@@ -174,39 +174,39 @@ static void ether_post_init (int devnum, int hw_addr)
 	case 1:
 		/* setup MAL tx & rx channel pointers */
 #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
-		mtdcr (maltxctp2r, &tx);
+		mtdcr (MAL0_TXCTP2R, &tx);
 #else
-		mtdcr (maltxctp1r, &tx);
+		mtdcr (MAL0_TXCTP1R, &tx);
 #endif
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
-		mtdcr (malrxctp1r, &rx);
+		mtdcr (MAL0_RXCTP1R, &rx);
 		/* set RX buffer size */
-		mtdcr (malrcbs1, PKTSIZE_ALIGN / 16);
+		mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16);
 		break;
 	case 0:
 	default:
 		/* setup MAL tx & rx channel pointers */
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
-		mtdcr (maltxctp0r, &tx);
-		mtdcr (malrxctp0r, &rx);
+		mtdcr (MAL0_TXCTP0R, &tx);
+		mtdcr (MAL0_RXCTP0R, &rx);
 		/* set RX buffer size */
-		mtdcr (malrcbs0, PKTSIZE_ALIGN / 16);
+		mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16);
 		break;
 	}
 
 	/* Enable MAL transmit and receive channels */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2)));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2)));
 #else
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum));
 #endif
-	mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
+	mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum));
 
 	/* set internal loopback mode */
 #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
@@ -257,14 +257,14 @@ static void ether_post_halt (int devnum, int hw_addr)
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2));
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2));
 #else
-	mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum);
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum);
 #endif
-	mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum);
+	mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum);
 
 	/* wait for reset */
-	while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) {
+	while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) {
 		if (i++ >= 1000)
 			break;
 		udelay (1000);
@@ -274,9 +274,9 @@ static void ether_post_halt (int devnum, int hw_addr)
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* remove clocks for EMAC internal loopback  */
-	mfsdr (sdr_mfr, mfr);
+	mfsdr (SDR0_MFR, mfr);
 	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
-	mtsdr (sdr_mfr, mfr);
+	mtsdr (SDR0_MFR, mfr);
 #endif
 }
 
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index 84a4d0a..be217fc 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -68,7 +68,7 @@
 #define CR0_EXTCLK_ENA  0x00600000
 #define CR0_UDIV_POS    16
 #define UDIV_SUBTRACT	1
-#define UART0_SDR	cntrl0
+#define UART0_SDR	CPC0_CR0
 #define MFREG(a, d)	d = mfdcr(a)
 #define MTREG(a, d)	mtdcr(a, d)
 #else /* #if defined(CONFIG_440GP) */
@@ -77,16 +77,16 @@
 #define CR0_EXTCLK_ENA  0x00800000
 #define CR0_UDIV_POS    0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_SDR	sdr_uart2
+#define UART2_SDR	SDR0_UART2
 #endif
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX)
-#define UART3_SDR	sdr_uart3
+#define UART3_SDR	SDR0_UART3
 #endif
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
@@ -106,8 +106,8 @@
 #define CR0_EXTCLK_ENA	0x00800000
 #define CR0_UDIV_POS	0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
 #else /* CONFIG_405GP || CONFIG_405CR */
@@ -276,7 +276,7 @@ static int uart_post_init (unsigned long dev_base)
 	clk = tmp = reg = 0;
 #else
 #ifdef CONFIG_405EP
-	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+	reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
 	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
@@ -284,9 +284,9 @@ static int uart_post_init (unsigned long dev_base)
 		udiv = UDIV_MAX;
 	reg |= (udiv) << UCR0_UDIV_POS;	        /* set the UART divisor */
 	reg |= (udiv) << UCR1_UDIV_POS;	        /* set the UART divisor */
-	mtdcr (cpc0_ucr, reg);
+	mtdcr (CPC0_UCR, reg);
 #else /* CONFIG_405EP */
-	reg = mfdcr(cntrl0) & ~CR0_MASK;
+	reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
 #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 	udiv = 1;
@@ -303,7 +303,7 @@ static int uart_post_init (unsigned long dev_base)
 #endif
 #endif
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
-	mtdcr (cntrl0, reg);
+	mtdcr (CPC0_CR0, reg);
 #endif /* CONFIG_405EP */
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;