diff options
author | Tobias Doerffel <tobias.doerffel@ed-chemnitz.de> | 2016-07-08 12:40:14 +0200 |
---|---|---|
committer | Hans de Goede <hdegoede@redhat.com> | 2016-07-15 08:34:34 +0200 |
commit | 26c0c15786039fb437925c08205702169462e343 (patch) | |
tree | 6a202f13dd2dee9a38ebec2b859044119722e977 | |
parent | 320e0570e67efbd093d7750655a758c66e9d5528 (diff) | |
download | u-boot-imx-26c0c15786039fb437925c08205702169462e343.zip u-boot-imx-26c0c15786039fb437925c08205702169462e343.tar.gz u-boot-imx-26c0c15786039fb437925c08205702169462e343.tar.bz2 |
sunxi: mmc: increase status register polling rate for data transfers
With a recent bunch of SD3.0 cards in our A20-based board we
experienced data transfer rates of about 250 KiB/s instead of 10 MiB/s
with previous cards from the same vendor (both 4 GB/class 10). By
increasing status register polling rate from 1 kHz to 1 MHz we were
able to reach the original transfer rates again. With the old cards
we now even reach about 16 MiB/s.
Signed-off-by: Tobias Doerffel <tobias.doerffel@ed-chemnitz.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-rw-r--r-- | drivers/mmc/sunxi_mmc.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index ce2dc4a..3be9a90 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -269,18 +269,18 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) unsigned i; unsigned *buff = (unsigned int *)(reading ? data->dest : data->src); unsigned byte_cnt = data->blocksize * data->blocks; - unsigned timeout_msecs = byte_cnt >> 8; - if (timeout_msecs < 2000) - timeout_msecs = 2000; + unsigned timeout_usecs = (byte_cnt >> 8) * 1000; + if (timeout_usecs < 2000000) + timeout_usecs = 2000000; /* Always read / write data through the CPU */ setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB); for (i = 0; i < (byte_cnt >> 2); i++) { while (readl(&mmchost->reg->status) & status_bit) { - if (!timeout_msecs--) + if (!timeout_usecs--) return -1; - udelay(1000); + udelay(1); } if (reading) |