diff options
author | Tom Rini <trini@ti.com> | 2014-11-14 16:39:32 -0500 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-11-14 16:39:32 -0500 |
commit | 2086e388d56cbb0e3737a6276f04f00f74bf6723 (patch) | |
tree | 280fe51e714f5124839d81e3e3a0a6967c9f81d3 | |
parent | 6393c43c18a1aadcdcdd8551826eef15f50353d5 (diff) | |
parent | 94b383e7d843efe2618535f01776921751dd756b (diff) | |
download | u-boot-imx-2086e388d56cbb0e3737a6276f04f00f74bf6723.zip u-boot-imx-2086e388d56cbb0e3737a6276f04f00f74bf6723.tar.gz u-boot-imx-2086e388d56cbb0e3737a6276f04f00f74bf6723.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
26 files changed, 411 insertions, 11 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index af75c63..9bd86d8 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -283,6 +283,7 @@ in_flash: bl cpu_init_f /* run 1st part of board init code (in Flash)*/ + li r3, 0 /* clear boot_flag for calling board_init_f */ bl board_init_f /* NOTREACHED - board_init_f() does not return */ diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 39b8e3e..1a30f1c 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -55,7 +55,7 @@ struct liodn_id_table liodn_tbl[] = { SET_SDHC_LIODN(1, 552), - SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(1, "fsl-usb2-dr", 553), SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 072387a..5ca9bf5 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -70,9 +70,9 @@ void setup_ifc(void) #endif /* Change flash's physical address */ - out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0); - out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0); - out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0); + ifc_out32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0); + ifc_out32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0); + ifc_out32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0); return ; } diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 3236f6a..8426b1a 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -430,7 +430,7 @@ void get_sys_info(sys_info_t *sys_info) #endif #if defined(CONFIG_FSL_IFC) - ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ifc_in32(&ifc_regs->ifc_ccr); ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; sys_info->freq_localbus = sys_info->freq_systembus / ccr; diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h index 4640e33..bed2a40 100644 --- a/arch/powerpc/include/asm/fsl_memac.h +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -159,6 +159,7 @@ struct memac { #define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ #define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ #define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN) +#define MEMAC_CMD_CFG_NO_LEN_CHK 0x20000 /* Payload length check disable */ /* HASHTABLE_CTRL - Hashtable control register */ #define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ @@ -243,6 +244,7 @@ struct memac_mdio_controller { #define MDIO_STAT_PRE (1 << 5) #define MDIO_STAT_ENC (1 << 6) #define MDIO_STAT_HOLD_15_CLK (7 << 2) +#define MDIO_STAT_NEG (1 << 23) #define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) #define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c index 7fe4ae7..9146f49 100644 --- a/board/freescale/bsc9131rdb/bsc9131rdb.c +++ b/board/freescale/bsc9131rdb/bsc9131rdb.c @@ -15,6 +15,9 @@ #include <fdt_support.h> #include <fsl_mdio.h> #include <tsec.h> +#include <jffs2/load_kernel.h> +#include <mtd_node.h> +#include <flash.h> #include <netdev.h> @@ -50,6 +53,11 @@ int checkboard(void) } #if defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_FDT_FIXUP_PARTITIONS +struct node_info nodes[] = { + { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, +}; +#endif void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; @@ -61,6 +69,9 @@ void ft_board_setup(void *blob, bd_t *bd) size = getenv_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); +#ifdef CONFIG_FDT_FIXUP_PARTITIONS + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); +#endif fdt_fixup_dr_usb(blob, bd); } diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 10580bc..c88838b 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -21,6 +21,9 @@ #include <hwconfig.h> #include <i2c.h> #include <fsl_ddr_sdram.h> +#include <jffs2/load_kernel.h> +#include <mtd_node.h> +#include <flash.h> #ifdef CONFIG_PCI #include <pci.h> @@ -354,6 +357,12 @@ void fdt_del_node_compat(void *blob, const char *compatible) } #if defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_FDT_FIXUP_PARTITIONS +struct node_info nodes[] = { + { "cfi-flash", MTD_DEV_TYPE_NOR, }, + { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, +}; +#endif void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; @@ -369,6 +378,9 @@ void ft_board_setup(void *blob, bd_t *bd) #endif fdt_fixup_memory(blob, (u64)base, (u64)size); +#ifdef CONFIG_FDT_FIXUP_PARTITIONS + fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); +#endif ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u32 porbmsr = in_be32(&gur->porbmsr); diff --git a/board/freescale/t104xrdb/t104x_pbi.cfg b/board/freescale/t104xrdb/t104x_pbi.cfg index 7b9e9b0..b83b9b7 100644 --- a/board/freescale/t104xrdb/t104x_pbi.cfg +++ b/board/freescale/t104xrdb/t104x_pbi.cfg @@ -1,4 +1,14 @@ #PBI commands +#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed +09250100 00000400 +09250108 00002000 +#Software Workaround for errata A-008007 to reset PVR register +09000010 0000000b +09000014 c0000000 +09000018 81d00017 +89020400 a1000000 +091380c0 000f0000 +89020400 00000000 #Initialize CPC1 09010000 00200400 09138000 00000000 diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile index f7f7fc0..3886e3d 100644 --- a/board/freescale/t4rdb/Makefile +++ b/board/freescale/t4rdb/Makefile @@ -5,6 +5,7 @@ # obj-$(CONFIG_T4240RDB) += t4240rdb.o +obj-y += cpld.o obj-y += ddr.o obj-y += eth.o obj-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c new file mode 100644 index 0000000..d5f3812 --- /dev/null +++ b/board/freescale/t4rdb/cpld.c @@ -0,0 +1,136 @@ +/** + * Copyright 2014 Freescale Semiconductor + * + * Author: Chunhe Lan <Chunhe.Lan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" + +u8 cpld_read(unsigned int reg) +{ + void *p = (void *)CONFIG_SYS_CPLD_BASE; + + return in_8(p + reg); +} + +void cpld_write(unsigned int reg, u8 value) +{ + void *p = (void *)CONFIG_SYS_CPLD_BASE; + + out_8(p + reg, value); +} + +/** + * Set the boot bank to the alternate bank + */ +void cpld_set_altbank(void) +{ + u8 val, curbank, altbank, override; + + val = CPLD_READ(vbank); + curbank = val & CPLD_BANK_SEL_MASK; + + switch (curbank) { + case CPLD_SELECT_BANK0: + altbank = CPLD_SELECT_BANK4; + CPLD_WRITE(vbank, altbank); + override = CPLD_READ(software_on); + CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); + CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET); + break; + case CPLD_SELECT_BANK4: + altbank = CPLD_SELECT_BANK0; + CPLD_WRITE(vbank, altbank); + override = CPLD_READ(software_on); + CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN); + CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET); + break; + default: + printf("CPLD Altbank Fail: Invalid value!\n"); + return; + } +} + +/** + * Set the boot bank to the default bank + */ +void cpld_set_defbank(void) +{ + u8 val; + + val = CPLD_DEFAULT_BANK; + + CPLD_WRITE(global_reset, val); +} + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + printf("chip_id1 = 0x%02x\n", CPLD_READ(chip_id1)); + printf("chip_id2 = 0x%02x\n", CPLD_READ(chip_id2)); + printf("sw_maj_ver = 0x%02x\n", CPLD_READ(sw_maj_ver)); + printf("sw_min_ver = 0x%02x\n", CPLD_READ(sw_min_ver)); + printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver)); + printf("software_on = 0x%02x\n", CPLD_READ(software_on)); + printf("cfg_rcw_src = 0x%02x\n", CPLD_READ(cfg_rcw_src)); + printf("res0 = 0x%02x\n", CPLD_READ(res0)); + printf("vbank = 0x%02x\n", CPLD_READ(vbank)); + printf("sw1_sysclk = 0x%02x\n", CPLD_READ(sw1_sysclk)); + printf("sw2_status = 0x%02x\n", CPLD_READ(sw2_status)); + printf("sw3_status = 0x%02x\n", CPLD_READ(sw3_status)); + printf("sw4_status = 0x%02x\n", CPLD_READ(sw4_status)); + printf("sys_reset = 0x%02x\n", CPLD_READ(sys_reset)); + printf("global_reset = 0x%02x\n", CPLD_READ(global_reset)); + printf("res1 = 0x%02x\n", CPLD_READ(res1)); + putc('\n'); +} +#endif + +#ifndef CONFIG_SPL_BUILD +int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (strcmp(argv[2], "altbank") == 0) + cpld_set_altbank(); + else + cpld_set_defbank(); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld, CONFIG_SYS_MAXARGS, 1, do_cpld, + "Reset the board or alternate bank", + "reset - reset to default bank\n" + "cpld reset altbank - reset to alternate bank\n" +#ifdef DEBUG + "cpld dump - display the CPLD registers\n" +#endif + ); +#endif diff --git a/board/freescale/t4rdb/cpld.h b/board/freescale/t4rdb/cpld.h new file mode 100644 index 0000000..0180082 --- /dev/null +++ b/board/freescale/t4rdb/cpld.h @@ -0,0 +1,49 @@ +/** + * Copyright 2014 Freescale Semiconductor + * + * Author: Chunhe Lan <Chunhe.Lan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +struct cpld_data { + u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */ + u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */ + u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */ + u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */ + u8 hw_ver; /* 0x04 - PCBA Version Register */ + u8 software_on; /* 0x05 - Override Physical Switch Enable Register */ + u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */ + u8 res0; /* 0x07 - not used */ + u8 vbank; /* 0x08 - Flash Bank Selection Control Register */ + u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */ + u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */ + u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */ + u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */ + u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/ + u8 global_reset;/* 0x0e - Reset System With Default Registers Value */ + u8 res1; /* 0x0f - not used */ +}; + +#define CPLD_BANK_SEL_MASK 0x07 +#define CPLD_BANK_SEL_EN 0x04 +#define CPLD_SYSTEM_RESET 0x01 +#define CPLD_SELECT_BANK0 0x00 +#define CPLD_SELECT_BANK4 0x04 +#define CPLD_DEFAULT_BANK 0x01 + +/* Pointer to the CPLD register set */ + +u8 cpld_read(unsigned int reg); +void cpld_write(unsigned int reg, u8 value); + +#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg)) +#define CPLD_WRITE(reg, value) \ + cpld_write(offsetof(struct cpld_data, reg), value) + diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c index 1f58768..39818fc 100644 --- a/board/freescale/t4rdb/law.c +++ b/board/freescale/t4rdb/law.c @@ -16,6 +16,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_QMAN_MEM_PHYS SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif +#ifdef CONFIG_SYS_CPLD_BASE_PHYS + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index afef7e9..2ff77b8 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -20,14 +20,26 @@ #include <fm_eth.h> #include "t4rdb.h" +#include "cpld.h" DECLARE_GLOBAL_DATA_PTR; int checkboard(void) { struct cpu_type *cpu = gd->arch.cpu; + u8 sw; printf("Board: %sRDB, ", cpu->name); + printf("Board rev: 0x%02x CPLD ver: 0x%02x%02x, ", + CPLD_READ(hw_ver), CPLD_READ(sw_maj_ver), CPLD_READ(sw_min_ver)); + + sw = CPLD_READ(vbank); + sw = sw & CPLD_BANK_SEL_MASK; + + if (sw <= 7) + printf("vBank: %d\n", sw); + else + printf("Unsupported Bank=%x\n", sw); puts("SERDES Reference Clocks:\n"); printf(" SERDES1=100MHz SERDES2=156.25MHz\n" diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c index 4b50bcd..474301e 100644 --- a/board/freescale/t4rdb/tlb.c +++ b/board/freescale/t4rdb/tlb.c @@ -106,6 +106,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif +#ifdef CONFIG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index 9499290..60e898c 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -37,7 +37,8 @@ static void memac_enable_mac(struct fsl_enet_mac *mac) { struct memac *regs = mac->base; - setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); + setbits_be32(®s->command_config, + MEMAC_CMD_CFG_RXTX_EN | MEMAC_CMD_CFG_NO_LEN_CHK); } static void memac_disable_mac(struct fsl_enet_mac *mac) @@ -93,11 +94,16 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode &= ~IF_MODE_MASK; if_mode |= (IF_MODE_GMII); break; + case PHY_INTERFACE_MODE_XGMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= IF_MODE_XGMII; + break; default: break; } - /* Enable automatic speed selection */ - if_mode |= IF_MODE_EN_AUTO; + /* Enable automatic speed selection for Non-XGMII */ + if (type != PHY_INTERFACE_MODE_XGMII) + if_mode |= IF_MODE_EN_AUTO; if (type == PHY_INTERFACE_MODE_RGMII) { if_mode &= ~IF_MODE_EN_AUTO; diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c index 5f910c2..a155d89 100644 --- a/drivers/net/fm/memac_phy.c +++ b/drivers/net/fm/memac_phy.c @@ -71,6 +71,8 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, u32 c45 = 1; if (dev_addr == MDIO_DEVAD_NONE) { + if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME)) + return 0xffff; c45 = 0; /* clause 22 */ dev_addr = regnum & 0x1f; clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); @@ -137,9 +139,12 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) * is zero, so MDIO clock is disabled. * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to * be properly initialized. + * NEG bit default should be '1' as per FMAN-v3 RM, but on platform + * like T2080QDS, this bit default is '0', which leads to MDIO failure + * on XAUI PHY, so set this bit definitely. */ setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat, - MDIO_STAT_CLKDIV(258)); + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); return mdio_register(bus); } diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index bc5af52..adb8146 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -400,6 +400,23 @@ extern unsigned long get_sdram_size(void); #endif /* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=ff800000.flash," +#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \ + "8m(kernel),512k(dtb),-(fs)" +/* + * Override partitions in device tree using info + * in "mtdparts" environment variable + */ +#ifdef CONFIG_CMD_MTDPARTS +#define CONFIG_FDT_FIXUP_PARTITIONS +#endif + +/* * Environment Configuration */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 989363c..2722a32 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -637,6 +637,27 @@ combinations. this should be removed later #endif /* + * Dynamic MTD Partition support with mtdparts + */ +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash," +#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \ + "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \ + "8m(kernel),512k(dtb),-(fs)" +#endif +/* + * Override partitions in device tree using info + * in "mtdparts" environment variable + */ +#ifdef CONFIG_CMD_MTDPARTS +#define CONFIG_FDT_FIXUP_PARTITIONS +#endif + +/* * Environment Configuration */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 54e2569..bd08090 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -616,6 +616,25 @@ #endif /* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#ifdef CONFIG_PHYS_64BIT +#define MTDIDS_DEFAULT "nor0=fe8000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \ + "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ + "512k(dtb),768k(u-boot)" +#else +#define MTDIDS_DEFAULT "nor0=e8000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \ + "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ + "512k(dtb),768k(u-boot)" +#endif + +/* * Environment */ #ifdef CONFIG_SPIFLASH diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 13f4bd3..e639e1d 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -514,6 +514,29 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +/* CPLD on IFC */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) + +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 + +/* CPLD Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + #if defined(CONFIG_RAMBOOT_PBL) #define CONFIG_SYS_RAMBOOT #endif diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index ae6b6dc..940000e 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -8,6 +8,9 @@ #ifndef __CONFIG_KM83XX_H #define __CONFIG_KM83XX_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* include common defines/options for all Keymile boards */ #include "keymile-common.h" #include "km-powerpc.h" diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index a0f9d29..864e5f1 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -11,7 +11,7 @@ #define CONFIG_PHYS_64BIT #define CONFIG_PPC_P2041 -#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#define CONFIG_SYS_TEXT_BASE 0xfff40000 #define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" @@ -21,6 +21,9 @@ #define CONFIG_NAND_ECC_BCH +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* common KM defines */ #include "keymile-common.h" @@ -235,7 +238,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Serial Port - controlled on board with jumper J8 diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index 029c348..69ba66a 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -29,6 +29,9 @@ #error ("Board unsupported") #endif +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_SYS_TEXT_BASE 0xFE000000 /* include common defines/options for all Keymile boards */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 9b58950..5f27c2a 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -80,6 +80,16 @@ #define __SW_BOOT_NAND 0x44 #define __SW_BOOT_PCIE 0x74 #define CONFIG_SYS_L2_SIZE (256 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ec000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \ + "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" #endif #if defined(CONFIG_P1021RDB) @@ -98,6 +108,24 @@ #define __SW_BOOT_NAND 0xec #define __SW_BOOT_PCIE 0x6c #define CONFIG_SYS_L2_SIZE (256 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#ifdef CONFIG_PHYS_64BIT +#define MTDIDS_DEFAULT "nor0=fef000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ + "256k(dtb),4608k(kernel),9728k(fs)," \ + "256k(qe-ucode-firmware),1280k(u-boot)" +#else +#define MTDIDS_DEFAULT "nor0=ef000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ + "256k(dtb),4608k(kernel),9728k(fs)," \ + "256k(qe-ucode-firmware),1280k(u-boot)" +#endif #endif #if defined(CONFIG_P1024RDB) @@ -145,6 +173,22 @@ #define __SW_BOOT_NAND 0xe8 #define __SW_BOOT_PCIE 0xa8 #define CONFIG_SYS_L2_SIZE (512 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#ifdef CONFIG_PHYS_64BIT +#define MTDIDS_DEFAULT "nor0=fef000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \ + "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" +#else +#define MTDIDS_DEFAULT "nor0=ef000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \ + "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" +#endif #endif #ifdef CONFIG_SDCARD diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 911203d..681bc92 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -389,6 +389,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_TWR-P1025 */ /* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ec000000.nor" +#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:256k(vsc7385-firmware)," \ + "256k(dtb),5632k(kernel),57856k(fs)," \ + "256k(qe-ucode-firmware),1280k(u-boot)" + +/* * Environment */ #ifdef CONFIG_SYS_RAMBOOT diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index f28f350..aee0d9e 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -13,6 +13,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Top level Makefile configuration choices */ |