summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-05-19 07:14:38 +0200
committerStefan Roese <sr@denx.de>2008-05-19 07:14:38 +0200
commit16bedc661de0dae767b1377d8413373a3fbcfa79 (patch)
treedbb10a738a9edebf817995c0aab2269f9b98517a
parenta38dc3ea8614f8b0c41e432b445a9959b9711295 (diff)
downloadu-boot-imx-16bedc661de0dae767b1377d8413373a3fbcfa79.zip
u-boot-imx-16bedc661de0dae767b1377d8413373a3fbcfa79.tar.gz
u-boot-imx-16bedc661de0dae767b1377d8413373a3fbcfa79.tar.bz2
ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
When SATA is selected (via jumper J6) we need to disable the first PCIe node in the device tree, so that Linux doesn't initialize it. Otherwise the Linux SATA driver will fail to detect the devices. The same goes the other way around too. So if PCIe is selected we need to disable the SATA node in the device tree. This is because PCIe port 0 and SATA on 460EX share the same pins (multiplexed) and we have to configure in U-Boot which peripheral is enabled. Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--board/amcc/canyonlands/canyonlands.c31
1 files changed, 30 insertions, 1 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 9986e9a..0f66061 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -476,8 +476,37 @@ void ft_board_setup(void *blob, bd_t *bd)
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
- if (rc)
+ if (rc) {
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
+ }
+
+ if (gd->board_type == BOARD_CANYONLANDS_SATA) {
+ /*
+ * When SATA is selected we need to disable the first PCIe
+ * node in the device tree, so that Linux doesn't initialize
+ * it.
+ */
+ rc = fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
+ "disabled", sizeof("disabled"), 1);
+ if (rc) {
+ printf("Unable to update property status in PCIe node, err=%s\n",
+ fdt_strerror(rc));
+ }
+ }
+
+ if (gd->board_type == BOARD_CANYONLANDS_PCIE) {
+ /*
+ * When PCIe is selected we need to disable the SATA
+ * node in the device tree, so that Linux doesn't initialize
+ * it.
+ */
+ rc = fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
+ "disabled", sizeof("disabled"), 1);
+ if (rc) {
+ printf("Unable to update property status in PCIe node, err=%s\n",
+ fdt_strerror(rc));
+ }
+ }
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */