PXA: Drop CRADLE board

The board is unmaintained and maintainer doesn't respond.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>

7 files changed, 1 insertions, 1000 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 7a5407c..7d6c97e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -905,7 +905,6 @@ Sughosh Ganu <urwithsughosh@gmail.com>
 Unknown / orphaned boards:
  	Board		CPU	Last known maintainer / Comment
 .........................................................................
-	cradle		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
 	lubbock		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
 
 	imx31_phycore_eet i.MX31  Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
diff --git a/board/cradle/Makefile b/board/cradle/Makefile
deleted file mode 100644
index bdc91d8..0000000
--- a/board/cradle/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= cradle.o flash.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
deleted file mode 100644
index 2bbf2d5..0000000
--- a/board/cradle/cradle.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/* local prototypes */
-void set_led (int led, int color);
-void error_code_halt (int code);
-int init_sio (int led, unsigned long base);
-inline void cradle_outb (unsigned short val, unsigned long base,
-			 unsigned long reg);
-inline unsigned char cradle_inb (unsigned long base, unsigned long reg);
-inline void sleep (int i);
-
-inline void
-/**********************************************************/
-sleep (int i)
-/**********************************************************/
-{
-	while (i--) {
-		udelay (1000000);
-	}
-}
-
-void
-/**********************************************************/
-error_code_halt (int code)
-/**********************************************************/
-{
-	while (1) {
-		led_code (code, RED);
-		sleep (1);
-		led_code (0, OFF);
-		sleep (1);
-	}
-}
-
-void
-/**********************************************************/
-led_code (int code, int color)
-/**********************************************************/
-{
-	int i;
-
-	code &= 0xf;		/* only 4 leds */
-
-	for (i = 0; i < 4; i++) {
-		if (code & (1 << i)) {
-			set_led (i, color);
-		} else {
-			set_led (i, OFF);
-		}
-	}
-}
-
-void
-/**********************************************************/
-set_led (int led, int color)
-/**********************************************************/
-{
-	int shift = led * 2;
-	unsigned long mask = 0x3 << shift;
-
-	writel(mask, GPCR2);	/* clear bits */
-	writel((color << shift), GPSR2);	/* set bits */
-	udelay (5000);
-}
-
-inline void
-/**********************************************************/
-cradle_outb (unsigned short val, unsigned long base, unsigned long reg)
-/**********************************************************/
-{
-	*(volatile unsigned short *) (base + (reg * 2)) = val;
-}
-
-inline unsigned char
-/**********************************************************/
-cradle_inb (unsigned long base, unsigned long reg)
-/**********************************************************/
-{
-	unsigned short val;
-
-	val = *(volatile unsigned short *) (base + (reg * 2));
-	return (val & 0xff);
-}
-
-int
-/**********************************************************/
-init_sio (int led, unsigned long base)
-/**********************************************************/
-{
-	unsigned char val;
-
-	set_led (led, YELLOW);
-	val = cradle_inb (base, CRADLE_SIO_INDEX);
-	val = cradle_inb (base, CRADLE_SIO_INDEX);
-	if (val != 0) {
-		set_led (led, RED);
-		return -1;
-	}
-
-	/* map SCC2 to COM1 */
-	cradle_outb (0x01, base, CRADLE_SIO_INDEX);
-	cradle_outb (0x00, base, CRADLE_SIO_DATA);
-
-	/* enable SCC2 extended regs */
-	cradle_outb (0x40, base, CRADLE_SIO_INDEX);
-	cradle_outb (0xa0, base, CRADLE_SIO_DATA);
-
-	/* enable SCC2 clock multiplier */
-	cradle_outb (0x51, base, CRADLE_SIO_INDEX);
-	cradle_outb (0x04, base, CRADLE_SIO_DATA);
-
-	/* enable SCC2 */
-	cradle_outb (0x00, base, CRADLE_SIO_INDEX);
-	cradle_outb (0x04, base, CRADLE_SIO_DATA);
-
-	/* map SCC2 DMA to channel 0 */
-	cradle_outb (0x4f, base, CRADLE_SIO_INDEX);
-	cradle_outb (0x09, base, CRADLE_SIO_DATA);
-
-	/* read ID from SIO to check operation */
-	cradle_outb (0xe4, base, 0x3f8 + 0x3);
-	val = cradle_inb (base, 0x3f8 + 0x0);
-	if ((val & 0xf0) != 0x20) {
-		set_led (led, RED);
-		/* disable SCC2 */
-		cradle_outb (0, base, CRADLE_SIO_INDEX);
-		cradle_outb (0, base, CRADLE_SIO_DATA);
-		return -1;
-	}
-	/* set back to bank 0 */
-	cradle_outb (0, base, 0x3f8 + 0x3);
-	set_led (led, GREEN);
-	return 0;
-}
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int
-/**********************************************************/
-board_late_init (void)
-/**********************************************************/
-{
-	return (0);
-}
-
-int
-/**********************************************************/
-board_init (void)
-/**********************************************************/
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	led_code (0xf, YELLOW);
-
-	/* arch number of HHP Cradle */
-	gd->bd->bi_arch_number = MACH_TYPE_HHP_CRADLE;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	/* Init SIOs to enable SCC2 */
-	udelay (100000);		/* delay makes it look neat */
-	init_sio (0, CRADLE_SIO1_PHYS);
-	udelay (100000);
-	init_sio (1, CRADLE_SIO2_PHYS);
-	udelay (100000);
-	init_sio (2, CRADLE_SIO3_PHYS);
-	udelay (100000);
-	set_led (3, GREEN);
-
-	return 1;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-	pxa_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/cradle/flash.c b/board/cradle/flash.c
deleted file mode 100644
index 1601782..0000000
--- a/board/cradle/flash.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x400000
-#define MAIN_SECT_SIZE  0x20000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(INTEL_MANUFACT & FLASH_VENDMASK) |
-			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		switch (i) {
-		case 0:
-			flashbase = PHYS_FLASH_1;
-			break;
-		case 1:
-			flashbase = PHYS_FLASH_2;
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] =
-				flashbase + j * MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-		       &flash_info[0]);
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i, j;
-
-	for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case (INTEL_MANUFACT & FLASH_VENDMASK):
-			printf ("Intel: ");
-			break;
-		default:
-			printf ("Unknown Vendor ");
-			break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
-			printf ("28F320J3A (32Mbit)\n");
-			break;
-		case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-			printf ("28F128J3 (128Mbit)\n");
-			break;
-		default:
-			printf ("Unknown Chip Type\n");
-			goto Done;
-			break;
-		}
-
-		printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-		printf ("  Sector Start Addresses:");
-		for (i = 0; i < info->sector_count; i++) {
-			if ((i % 5) == 0) {
-				printf ("\n   ");
-			}
-			printf (" %08lX%s", info->start[i],
-				info->protect[i] ? " (RO)" : "     ");
-		}
-		printf ("\n");
-		info++;
-	}
-
-Done:	;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	int rc = ERR_OK;
-	ulong start;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (INTEL_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_short *addr = (vu_short *) (info->start[sect]);
-
-			*addr = 0x20;	/* erase setup */
-			*addr = 0xD0;	/* erase confirm */
-
-			while ((*addr & 0x80) != 0x80) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_ERASE_TOUT) {
-					*addr = 0xB0;	/* suspend erase */
-					*addr = 0xFF;	/* reset to read mode */
-					rc = ERR_TIMOUT;
-					goto outahere;
-				}
-			}
-
-			/* clear status register command */
-			*addr = 0x50;
-			/* reset to read mode */
-			*addr = 0xFF;
-		}
-		printf ("ok.\n");
-	}
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-outahere:
-
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked (10000);
-
-	if (flag)
-		enable_interrupts ();
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
-	vu_short *addr = (vu_short *) dest, val;
-	int rc = ERR_OK;
-	int flag;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased
-	 */
-	if ((*addr & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts ();
-
-	/* clear status register command */
-	*addr = 0x50;
-
-	/* program set-up command */
-	*addr = 0x40;
-
-	/* latch address/data */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((val = *addr) & 0x80) != 0x80) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = ERR_TIMOUT;
-			/* suspend program command */
-			*addr = 0xB0;
-			goto outahere;
-		}
-	}
-
-	if (val & 0x1A) {	/* check for error */
-		printf ("\nFlash write error %02x at address %08lx\n",
-			(int) val, (unsigned long) dest);
-		if (val & (1 << 3)) {
-			printf ("Voltage range error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		if (val & (1 << 1)) {
-			printf ("Device protect error.\n");
-			rc = ERR_PROTECTED;
-			goto outahere;
-		}
-		if (val & (1 << 4)) {
-			printf ("Programming error.\n");
-			rc = ERR_PROG_ERROR;
-			goto outahere;
-		}
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	}
-
-outahere:
-	/* read array command */
-	*addr = 0xFF;
-
-	if (flag)
-		enable_interrupts ();
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	ushort data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-		for (; i < 2 && cnt > 0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		data = *((vu_short *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) {
-		return ERR_OK;
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i < 2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *) cp << 8);
-	}
-
-	return write_word (info, wp, data);
-}
diff --git a/boards.cfg b/boards.cfg
index 82c705d..f649ae9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -217,7 +217,6 @@ actux4                       arm         ixp
 dvlhost                      arm         ixp
 balloon3                     arm         pxa
 colibri_pxa270               arm         pxa
-cradle                       arm         pxa
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 732d92d..3e7f113 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+cradle  arm     pxa     4e24f8a   2011-25-11    Kyle Harris <kharris@nexus-tech.net>
 cerf250 arm     pxa     a3f1241   2011-25-11    Prakash Kumar <prakash@embedx.com>
 mpq101	powerpc	mpc85xx	-	  2011-10-23	Alex Dubov <oakad@yahoo.com>
 ixdpg425 arm	ixp	0ca8eb7	  2011-09-22	Stefan Roese <sr@denx.de>
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
deleted file mode 100644
index 25be616..0000000
--- a/include/configs/cradle.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250           1       /* This is an PXA250 CPU    */
-#define CONFIG_HHP_CRADLE       1       /* on an Cradle Board       */
-
-#undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-#define	CONFIG_SYS_TEXT_BASE		0x0
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x10000300
-#define CONFIG_SMC91111_EXT_PHY
-#define CONFIG_SMC_USE_32_BIT
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART          1       /* we use FFUART on LUBBOCK */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE         115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY        3
-#define CONFIG_BOOTARGS         "root=/dev/mtdblock2 console=ttyS0,115200"
-#define CONFIG_ETHADDR          08:00:3e:26:0a:5b
-#define CONFIG_NETMASK          255.255.0.0
-#define CONFIG_IPADDR           192.168.0.21
-#define CONFIG_SERVERIP         192.168.0.250
-#define CONFIG_BOOTCOMMAND      "bootm 40000"
-#define CONFIG_CMDLINE_TAG
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
-
-#define CONFIG_SYS_LOAD_ADDR           0xa2000000      /* default load address */
-
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS    1          /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1            0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE       0x01000000 /* 64 MB */
-
-#define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_DRAM_BASE           0xa0000000
-#define CONFIG_SYS_DRAM_SIZE           0x04000000
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1     /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      32    /* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR				0x00020000	/* absolute address for now   */
-#define CONFIG_ENV_SIZE				0x20000	   /* 8K ouch, this may later be */
-
-/******************************************************************************
- *
- * CPU specific defines
- *
- ******************************************************************************/
-
-/*
- * GPIO settings
- *
- * GPIO pin assignments
- * GPIO     Name        Dir Out AF
- * 0        NC
- * 1        NC
- * 2        SIRQ1       I
- * 3        SIRQ2       I
- * 4        SIRQ3       I
- * 5        DMAACK1     O   0
- * 6        DMAACK2     O   0
- * 7        DMAACK3     O   0
- * 8        TC1         O   0
- * 9        TC2         O   0
- * 10       TC3         O   0
- * 11       nDMAEN      O   1
- * 12       AENCTRL     O   0
- * 13       PLDTC       O   0
- * 14       ETHIRQ      I
- * 15       NC
- * 16       NC
- * 17       NC
- * 18       RDY         I
- * 19       DMASIO      I
- * 20       ETHIRQ      NC
- * 21       NC
- * 22       PGMEN       O   1    FIXME for debug only enable flash
- * 23       NC
- * 24       NC
- * 25       NC
- * 26       NC
- * 27       NC
- * 28       NC
- * 29       NC
- * 30       NC
- * 31       NC
- * 32       NC
- * 33       NC
- * 34       FFRXD       I       01
- * 35       FFCTS       I       01
- * 36       FFDCD       I       01
- * 37       FFDSR       I       01
- * 38       FFRI        I       01
- * 39       FFTXD       O   1   10
- * 40       FFDTR       O   0   10
- * 41       FFRTS       O   0   10
- * 42       RS232FOFF   O   0   00
- * 43       NC
- * 44       NC
- * 45       IRSL0       O   0
- * 46       IRRX0       I       01
- * 47       IRTX0       O   0   10
- * 48       NC
- * 49       nIOWE       O   0
- * 50       NC
- * 51       NC
- * 52       NC
- * 53       NC
- * 54       NC
- * 55       NC
- * 56       NC
- * 57       NC
- * 58       DKDIRQ      I
- * 59       NC
- * 60       NC
- * 61       NC
- * 62       NC
- * 63       NC
- * 64       COMLED      O   0
- * 65       COMLED      O   0
- * 66       COMLED      O   0
- * 67       COMLED      O   0
- * 68       COMLED      O   0
- * 69       COMLED      O   0
- * 70       COMLED      O   0
- * 71       COMLED      O   0
- * 72       NC
- * 73       NC
- * 74       NC
- * 75       NC
- * 76       NC
- * 77       NC
- * 78       CSIO        O   1
- * 79       NC
- * 80       CSETH       O   1
- *
- * NOTE: All NC's are defined to be outputs
- *
- */
-/* Pin direction control */
-/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */
-#define CONFIG_SYS_GPDR0_VAL       0xfff3bf02
-#define CONFIG_SYS_GPDR1_VAL       0xfbffbf83
-#define CONFIG_SYS_GPDR2_VAL       0x0001ffff
-/* Set and Clear registers */
-#define CONFIG_SYS_GPSR0_VAL       0x00400800
-#define CONFIG_SYS_GPSR1_VAL       0x00000480
-#define CONFIG_SYS_GPSR2_VAL       0x00014000
-#define CONFIG_SYS_GPCR0_VAL       0x00000000
-#define CONFIG_SYS_GPCR1_VAL       0x00000000
-#define CONFIG_SYS_GPCR2_VAL       0x00000000
-/* Edge detect registers (these are set by the kernel) */
-#define CONFIG_SYS_GRER0_VAL       0x00000000
-#define CONFIG_SYS_GRER1_VAL       0x00000000
-#define CONFIG_SYS_GRER2_VAL       0x00000000
-#define CONFIG_SYS_GFER0_VAL       0x00000000
-#define CONFIG_SYS_GFER1_VAL       0x00000000
-#define CONFIG_SYS_GFER2_VAL       0x00000000
-/* Alternate function registers */
-#define CONFIG_SYS_GAFR0_L_VAL     0x00000000
-#define CONFIG_SYS_GAFR0_U_VAL     0x00000010
-#define CONFIG_SYS_GAFR1_L_VAL     0x900a9550
-#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL     0x20000000
-#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
-
-/*
- * Clocks, power control and interrupts
- */
-#define CONFIG_SYS_PSSR_VAL        0x00000020
-#define CONFIG_SYS_CCCR        0x00000141  /* 100 MHz memory, 200 MHz CPU  */
-#define CONFIG_SYS_CKEN        0x00000060  /* FFUART and STUART enabled    */
-#define CONFIG_SYS_ICMR        0x00000000  /* No interrupts enabled        */
-
-/* FIXME
- *
- * RTC settings
- * Watchdog
- *
- */
-
-/*
- * Memory settings
- *
- * FIXME Can ethernet be burst read and/or write?? This is set for lubbock
- *       Verify timings on all
- */
-#define CONFIG_SYS_MSC0_VAL        0x000023FA  /* flash bank    (cs0)   */
-/*#define CONFIG_SYS_MSC1_VAL        0x00003549  / * SuperIO bank  (cs2)   */
-#define CONFIG_SYS_MSC1_VAL        0x0000354c  /* SuperIO bank  (cs2)   */
-#define CONFIG_SYS_MSC2_VAL        0x00001224  /* Ethernet bank (cs4)   */
-#ifdef REDBOOT_WAY
-#define CONFIG_SYS_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
-#define CONFIG_SYS_MDMRS_VAL       0x00000000
-#define CONFIG_SYS_MDREFR_VAL      0x00018018
-#else
-#define CONFIG_SYS_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
-#define CONFIG_SYS_MDMRS_VAL       0x00000000
-#define CONFIG_SYS_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in lowlevel_init.S */
-#endif
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
- * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
- */
-#define CONFIG_SYS_MECR_VAL          0x00000000
-#define CONFIG_SYS_MCMEM0_VAL        0x00010504
-#define CONFIG_SYS_MCMEM1_VAL        0x00010504
-#define CONFIG_SYS_MCATT0_VAL        0x00010504
-#define CONFIG_SYS_MCATT1_VAL        0x00010504
-#define CONFIG_SYS_MCIO0_VAL         0x00004715
-#define CONFIG_SYS_MCIO1_VAL         0x00004715
-
-/* Board specific defines */
-
-/* LED defines */
-#define YELLOW    0x03
-#define RED       0x02
-#define GREEN     0x01
-#define OFF       0x00
-#define LED_IRDA0 0
-#define LED_IRDA1 2
-#define LED_IRDA2 4
-#define LED_IRDA3 6
-
-/* SuperIO defines */
-#define CRADLE_SIO_INDEX      0x2e
-#define CRADLE_SIO_DATA       0x2f
-
-/* IO defines */
-#define CRADLE_CPLD_PHYS      0x08000000
-#define CRADLE_SIO1_PHYS      0x08100000
-#define CRADLE_SIO2_PHYS      0x08200000
-#define CRADLE_SIO3_PHYS      0x08300000
-#define CRADLE_ETH_PHYS       0x10000000
-
-#ifndef __ASSEMBLY__
-
-/* global prototypes */
-void led_code(int code, int color);
-
-#endif
-
-#endif  /* __CONFIG_H */