mpc8260: remove muas3001 board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>

9 files changed, 1 insertions, 761 deletions

diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index cb81cdc..2b3c9c2 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -25,9 +25,6 @@ config TARGET_GW8260
 config TARGET_IPHASE4539
 	bool "Support IPHASE4539"
 
-config TARGET_MUAS3001
-	bool "Support muas3001"
-
 config TARGET_KM82XX
 	bool "Support km82xx"
 
@@ -40,6 +37,5 @@ source "board/ep82xxm/Kconfig"
 source "board/gw8260/Kconfig"
 source "board/iphase4539/Kconfig"
 source "board/keymile/km82xx/Kconfig"
-source "board/muas3001/Kconfig"
 
 endmenu
diff --git a/board/muas3001/Kconfig b/board/muas3001/Kconfig
deleted file mode 100644
index 94a00b3..0000000
--- a/board/muas3001/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MUAS3001
-
-config SYS_BOARD
-	default "muas3001"
-
-config SYS_CONFIG_NAME
-	default "muas3001"
-
-endif
diff --git a/board/muas3001/MAINTAINERS b/board/muas3001/MAINTAINERS
deleted file mode 100644
index cfb5983..0000000
--- a/board/muas3001/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MUAS3001 BOARD
-M:	Heiko Schocher <hs@denx.de>
-S:	Maintained
-F:	board/muas3001/
-F:	include/configs/muas3001.h
-F:	configs/muas3001_defconfig
-F:	configs/muas3001_dev_defconfig
diff --git a/board/muas3001/Makefile b/board/muas3001/Makefile
deleted file mode 100644
index ef04960..0000000
--- a/board/muas3001/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= muas3001.o
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
deleted file mode 100644
index e0c4dba..0000000
--- a/board/muas3001/muas3001.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { 0,          0,   0,   0,   0,   0 }, /* PA31            */
-	/* PA30 */ { 0,          0,   0,   0,   0,   0 }, /* PA30            */
-	/* PA29 */ { 1,          1,   1,   1,   0,   0 }, /* FCC1 TXER */
-	/* PA28 */ { 1,          1,   1,   1,   0,   0 }, /* FCC1 TXEN */
-	/* PA27 */ { 1,          1,   1,   0,   0,   0 }, /* FCC1 RXDV */
-	/* PA26 */ { 1,          1,   1,   0,   0,   0 }, /* FCC1 RXER */
-	/* PA25 */ { 1,          0,   0,   1,   0,   0 }, /* ETH_PWRDWN      */
-	/* PA24 */ { 1,          0,   0,   1,   0,   1 }, /* ETH_RESET       */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD3 */
-	/* PA20 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD2 */
-	/* PA19 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD1 */
-	/* PA18 */ { 1,          1,   0,   1,   0,   0 }, /* FCC1 TXD0 */
-	/* PA17 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD0 */
-	/* PA16 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD1 */
-	/* PA15 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD2 */
-	/* PA14 */ { 1,          1,   0,   0,   0,   0 }, /* FCC1 RXD3 */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 1,          0,   0,   1,   0,   0 }, /* ETH_SLEEP       */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 1,          0,   0,   1,   0,   0 }, /* MDIO            */
-	/* PA9  */ { 1,          0,   0,   1,   0,   0 }, /* MDC             */
-	/* PA8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { 0,          0,   0,   0,   0,   0 }, /* PB31            */
-	/* PB30 */ { 0,          0,   0,   0,   0,   0 }, /* PB30            */
-	/* PB29 */ { 0,          0,   0,   0,   0,   0 }, /* PB29            */
-	/* PB28 */ { 1,          1,   1,   1,   0,   0 }, /* SCC1 TxD        */
-	/* PB27 */ { 0,          0,   0,   0,   0,   0 }, /* PB27            */
-	/* PB26 */ { 0,          0,   0,   0,   0,   0 }, /* PB26            */
-	/* PB25 */ { 0,          0,   0,   0,   0,   0 }, /* PB25            */
-	/* PB24 */ { 0,          0,   0,   0,   0,   0 }, /* PB24            */
-	/* PB23 */ { 0,          0,   0,   0,   0,   0 }, /* PB23            */
-	/* PB22 */ { 0,          0,   0,   0,   0,   0 }, /* PB22            */
-	/* PB21 */ { 0,          0,   0,   0,   0,   0 }, /* PB21            */
-	/* PB20 */ { 0,          0,   0,   0,   0,   0 }, /* PB20            */
-	/* PB19 */ { 0,          0,   0,   0,   0,   0 }, /* PB19            */
-	/* PB18 */ { 0,          0,   0,   0,   0,   0 }, /* PB18            */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 1,          1,   0,   0,   0,   0 }, /* SCC2 RxD        */
-	/* PB14 */ { 1,          1,   0,   0,   0,   0 }, /* SCC3 RxD        */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 1,          1,   1,   1,   0,   0 }, /* SCC2 TxD        */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 1,          1,   1,   1,   0,   0 }, /* SCC3 TxD        */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 1,          1,   1,   1,   0,   0 }, /* Timer1 OUT      */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { 0,          0,   0,   0,   0,   0 }, /* PC22            */
-	/* PC21 */ { 1,          1,   0,   0,   0,   0 }, /* FCC RxCLK 11    */
-	/* PC20 */ { 1,          1,   0,   0,   0,   0 }, /* FCC TxCLK 12    */
-	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19            */
-	/* PC18 */ { 0,          0,   0,   0,   0,   0 }, /* PC18            */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 1,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 1,          0,   0,   1,   0,   0 }, /* TX OUTPUT SLEW1 */
-	/* PC11 */ { 1,          0,   0,   1,   0,   0 }, /* TX OUTPUT SLEW0 */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          0,   0,   1,   0,   1 }, /* SPA_TX_EN       */
-	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8             */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5             */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4             */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 1,          1,   0,   0,   0,   0 }, /* SCC1 RxD        */
-	/* PD30 */ { 0,          0,   0,   0,   0,   0 }, /* PD30            */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 1,          1,   0,   0,   0,   0 }, /* SCC4: RXD       */
-	/* PD21 */ { 1,          1,   0,   1,   0,   0 }, /* SCC4: TXD       */
-	/* PD20 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SCL         */
-#else
-	/* PD15 */ { 1,          0,   0,   0,   1,   1 }, /* PD15            */
-	/* PD14 */ { 1,          0,   0,   1,   1,   1 }, /* PD14            */
-#endif
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 TxD        */
-	/* PD8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 RxD        */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
-	sdmr_ptr = &memctl->memc_psdmr;
-	orx_ptr = &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size ((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	long psize;
-	long sizelittle, sizebig;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	/* 60x SDRAM setup:
-	 */
-	sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	if (sizelittle < sizebig) {
-		psize = sizebig;
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	}
-
-	icache_enable ();
-
-	return (psize);
-}
-
-int checkboard (void)
-{
-	puts ("Board: MUAS3001\n");
-
-	return 0;
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r (void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * update "memory" property in the blob
- */
-void ft_blob_update (void *blob, bd_t *bd)
-{
-	int ret, nodeoffset = 0;
-	ulong flash_data[4] = {0};
-	ulong	speed = 0;
-
-	/* update Flash addr, size */
-	flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
-	flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
-	nodeoffset = fdt_path_offset (blob, "/localbus");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
-					sizeof (flash_data));
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	} else {
-		/* memory node is required in dts */
-		printf ("ft_blob_update(): cannot find /localbus node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
-
-	/* baudrate */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
-	if (nodeoffset >= 0) {
-		speed = cpu_to_be32 (gd->baudrate);
-		ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
-					sizeof (unsigned long));
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
-			"property err:%s\n", fdt_strerror (ret));
-	} else {
-		/* baudrate is required in dts */
-		printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup (blob, bd);
-	ft_blob_update (blob, bd);
-
-	return 0;
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/configs/muas3001_defconfig b/configs/muas3001_defconfig
deleted file mode 100644
index e1056bd..0000000
--- a/configs/muas3001_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_MUAS3001=y
diff --git a/configs/muas3001_dev_defconfig b/configs/muas3001_dev_defconfig
deleted file mode 100644
index a62019c..0000000
--- a/configs/muas3001_dev_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="MUAS_DEV_BOARD"
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_MUAS3001=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f1c2f8b..7f76aae 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+muas3001         powerpc     mpc8260        -           -           Heiko Schocher <hs@denx.de>
 PM825            powerpc     mpc8260        -           -           Wolfgang Denk <wd@denx.de>
 PM826            powerpc     mpc8260        -           -           Wolfgang Denk <wd@denx.de>
 PM828            powerpc     mpc8260        -           -
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
deleted file mode 100644
index df2ecc1..0000000
--- a/include/configs/muas3001.h
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MUAS3001		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFF000000
-
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/* Do boardspecific init */
-#define CONFIG_BOARD_EARLY_INIT_R       1
-
-/* enable Watchdog */
-#define CONFIG_WATCHDOG		1
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
-#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
-#undef	CONFIG_CONS_NONE		/* It's not on external UART */
-#if defined(CONFIG_MUAS_DEV_BOARD)
-#define CONFIG_CONS_INDEX	2	/* SMC2 is used for console  */
-#else
-#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
-#endif
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
-#define	CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
-#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
-
-#define CONFIG_ETHER_INDEX	1
-#define CONFIG_ETHER_ON_FCC1
-#define CONFIG_HAS_ETH0
-#define FCC_ENET
-
-/*
- * - Rx-CLK is CLK11
- * - Tx-CLK is CLK12
- */
-# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
-# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-/*
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- */
-# define CONFIG_SYS_CPMFCR_RAMTYPE	(0)
-/* know on local Bus */
-/* define CONFIG_SYS_CPMFCR_RAMTYPE	(CPMFCR_DTB | CPMFCR_BDB) */
-/*
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#define CONFIG_MII			/* MII PHY management		*/
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-# define CONFIG_SYS_PHY_ADDR		1
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT	0		/* Port A */
-#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE	MDIO_DECLARE
-
-
-#define CONFIG_SYS_MDIO_PIN	0x00200000	/* PA10 */
-#define CONFIG_SYS_MDC_PIN	0x00400000	/* PA9  */
-
-#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY	udelay(1)
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN	66000000	/* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-
-/*
- * Default environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS						\
-	"netdev=eth0\0"								\
-	"u-boot_addr_r=100000\0"						\
-	"kernel_addr_r=200000\0"						\
-	"fdt_addr_r=400000\0"							\
-	"rootpath=/opt/eldk/ppc_6xx\0"						\
-	"u-boot=muas3001/u-boot.bin\0"						\
-	"bootfile=muas3001/uImage\0"						\
-	"fdt_file=muas3001/muas3001.dtb\0"					\
-	"ramdisk_file=uRamdisk\0"						\
-	"load=tftp ${u-boot_addr_r} ${u-boot}\0"				\
-	"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; "		\
-		"cp.b ${u-boot_addr_r} ff000000 ${filesize};"			\
-		"prot on ff000000 ff03ffff\0"					\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"				\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=${serverip}:${rootpath}\0"				\
-	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"			\
-	"addip=setenv bootargs ${bootargs} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:"			\
-		"${netmask}:${hostname}:${netdev}:off panic=1\0"		\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "				\
-		"tftp ${fdt_addr_r} ${fdt_file}; run nfsargs addip addcons;"	\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"			\
-	"net_self=tftp ${kernel_addr_r} ${bootfile}; "				\
-		"tftp ${fdt_addr_r} ${fdt_file}; "				\
-		"tftp ${ramdisk_addr} ${ramdisk_file}; "			\
-		"run ramargs addip; "						\
-		"bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"	\
-	"ramdisk_addr=ff210000\0"						\
-	"kernel_addr=ff050000\0"						\
-	"fdt_addr=ff200000\0"							\
-	"flash_self=run ramargs addip addcons;bootm ${kernel_addr}"		\
-	" ${ramdisk_addr} ${fdt_addr}\0"					\
-	"updateramdisk=era ${ramdisk_addr} +1f0000;tftpb ${kernel_addr_r}"	\
-	" ${ramdisk_file};"							\
-	"cp.b ${kernel_addr_r} ${ramdisk_addr} ${filesize}\0"			\
-	"updatekernel=era ${kernel_addr} +1b0000;tftpb ${kernel_addr_r}"	\
-	" ${bootfile};"								\
-	"cp.b ${kernel_addr_r} ${kernel_addr} ${filesize}\0"			\
-	"updatefdt=era ${fdt_addr} +10000;tftpb ${fdt_addr_r} ${fdt_file};"	\
-	"cp.b ${fdt_addr_r} ${fdt_addr} ${filesize}\0"				\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run net_nfs"
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFF000000
-#define CONFIG_SYS_FLASH_SIZE		32
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/*
- * I2C Bus
- */
-#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
-#define	CONFIG_DTT_LM75		1	/* ON Semi's LM75               */
-#define	CONFIG_DTT_SENSORS	{0}	/* Sensor addresses             */
-#define	CONFIG_SYS_DTT_MAX_TEMP	70
-#define	CONFIG_SYS_DTT_LOW_TEMP	-30
-#define	CONFIG_SYS_DTT_HYSTERESIS	3
-
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER		0x0E028200	/* BPS=11 CIP=1 ISB=010 BMS=1 */
-
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 	0
-#define CONFIG_SYS_HRCW_SLAVE2 	0
-#define CONFIG_SYS_HRCW_SLAVE3 	0
-#define CONFIG_SYS_HRCW_SLAVE4 	0
-#define CONFIG_SYS_HRCW_SLAVE5 	0
-#define CONFIG_SYS_HRCW_SLAVE6 	0
-#define CONFIG_SYS_HRCW_SLAVE7 	0
-
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SIUMCR		0x00200000
-#define CONFIG_SYS_BCR			0x004c0000
-#define CONFIG_SYS_SCCR		0x0
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control                             4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register                                     5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR         0
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control                     4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control                 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration                         13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR        0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus     Machine PortSz  Device
- * ---- ---     ------- ------  ------
- *  0   60x     GPCM    32 bit  FLASH
- *  1   60x     SDRAM   64 bit  SDRAM
- *  4   60x     GPCM    16 bit  I/O Ctrl
- *
- */
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
-			 BRx_PS_32			|\
-			 BRx_MS_GPCM_P			|\
-			 BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (0xff000020)
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
-
-#define CONFIG_SYS_MPTPR       0x2800
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS	0x00000110
-#define CONFIG_SYS_PSRT        0x13
-
-#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
-			 BRx_PS_64                      |\
-			 BRx_MS_SDRAM_P                 |\
-			 BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_LITTLE
-
-/* SDRAM initialization values
-*/
-#define CONFIG_SYS_OR1_LITTLE	((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A7		|\
-			 ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_LITTLE	0x004b36a3
-
-#define CONFIG_SYS_OR1_BIG	((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A4		|\
-			 ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_BIG		0x014f36a3
-
-/* IO on CS4 initialization values
-*/
-#define CONFIG_SYS_IO_BASE	0xc0000000
-#define CONFIG_SYS_IO_SIZE	1
-
-#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_IO_BASE & BRx_BA_MSK) |\
-			 BRx_PS_16 | BRx_MS_GPCM_L | BRx_V)
-
-#define CONFIG_SYS_OR4_PRELIM	(0xfff80020)
-
-#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#if defined(CONFIG_MUAS_DEV_BOARD)
-#define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"
-#else
-#define OF_STDOUT_PATH		"/soc/cpm/serial@11a80"
-#endif
-
-#endif /* __CONFIG_H */