Add ATSTK1000 and ATSTK1002 board support

Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.

ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:

http://www.atmel.com/dyn/products/tools.asp?family_id=682

The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
AT32AP7000 chip.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

9 files changed, 606 insertions, 1 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index d7ef203..cff3957 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -561,6 +561,10 @@ Zachary P. Landau <zachary.landau@labxtechnologies.com>
 #	Board			CPU					#
 #########################################################################
 
+Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+	ATSTK1000		AT32AP7000
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
diff --git a/MAKEALL b/MAKEALL
index 4409f2b..879a17f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -302,6 +302,12 @@ LIST_coldfire="	\
 	r5200		M5271EVB					\
 "
 
+#########################################################################
+## AVR32 Systems
+#########################################################################
+
+LIST_avr32="atstk1002"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -334,7 +340,8 @@ do
 	mips|mips_el| \
 	nios|nios2| \
 	x86|I486| \
-	coldfire)
+	coldfire| \
+	avr32)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
diff --git a/README b/README
index 69af79a..f83d774 100644
--- a/README
+++ b/README
@@ -330,6 +330,15 @@ The following options need to be configured:
 		CONFIG_PCI5441 CONFIG_PK1C20
 		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
 
+		AVR32 based boards:
+		-------------------
+
+		CONFIG_ATSTK1000
+
+- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
+		Define exactly one of
+		CONFIG_ATSTK1002
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
diff --git a/board/atstk1000/Makefile b/board/atstk1000/Makefile
new file mode 100644
index 0000000..22ac02a
--- /dev/null
+++ b/board/atstk1000/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o flash.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atstk1000/atstk1000.c b/board/atstk1000/atstk1000.c
new file mode 100644
index 0000000..4d737d2
--- /dev/null
+++ b/board/atstk1000/atstk1000.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_info sdram = {
+	.phys_addr	= CFG_SDRAM_BASE,
+	.row_bits	= 11,
+	.col_bits	= 8,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+};
+
+void board_init_memories(void)
+{
+	gd->sdram_size = sdram_init(&sdram);
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x10;
+	gd->bd->bi_phy_id[1] = 0x11;
+}
diff --git a/board/atstk1000/config.mk b/board/atstk1000/config.mk
new file mode 100644
index 0000000..a72c80e
--- /dev/null
+++ b/board/atstk1000/config.mk
@@ -0,0 +1,4 @@
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections
+TEXT_BASE		= 0x00000000
+LDSCRIPT		= $(obj)board/atstk1000/u-boot.lds
diff --git a/board/atstk1000/flash.c b/board/atstk1000/flash.c
new file mode 100644
index 0000000..3aebf66
--- /dev/null
+++ b/board/atstk1000/flash.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_ATSTK1000_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+{
+	unsigned long flags;
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+
+	writew(0xaa, flash + 0x555);
+	writew(0x55, flash + 0xaaa);
+	writew(0x90, flash + 0x555);
+	info->flash_id = readl(flash);
+	writew(0xff, flash);
+
+	readw(flash);
+
+	if (flags)
+		enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long addr;
+	unsigned int i;
+
+	gd->bd->bi_flashstart = CFG_FLASH_BASE;
+	gd->bd->bi_flashsize = CFG_FLASH_SIZE;
+	gd->bd->bi_flashoffset = __edata_lma - _text;
+
+	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].sector_count = 135;
+
+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+		flash_info[0].start[i] = addr;
+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+		flash_info[0].start[i] = addr;
+
+	return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+	       info->flash_id >> 16, info->flash_id & 0xffff);
+	printf("Size: %ld MB in %d sectors\n",
+	       info->size >> 10, info->sector_count);
+}
+
+int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	unsigned long flags;
+	unsigned long start_time;
+	uint16_t *fb, *sb;
+	unsigned int i;
+	int ret;
+	uint16_t status;
+
+	if ((s_first < 0) || (s_first > s_last)
+	    || (s_last >= info->sector_count)) {
+		puts("Error: first and/or last sector out of range\n");
+		return ERR_INVAL;
+	}
+
+	for (i = s_first; i < s_last; i++)
+		if (info->protect[i]) {
+			printf("Error: sector %d is protected\n", i);
+			return ERR_PROTECTED;
+		}
+
+	fb = (uint16_t *)uncached(info->start[0]);
+
+	dcache_flush_unlocked();
+
+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+		printf("Erasing sector %3d...", i);
+
+		sb = (uint16_t *)uncached(info->start[i]);
+
+		flags = disable_interrupts();
+
+		start_time = get_timer(0);
+
+		/* Unlock sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x70, sb);
+
+		/* Erase sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x80, fb + 0x555);
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x30, sb);
+
+		/* Wait for completion */
+		ret = ERR_OK;
+		do {
+			/* TODO: Timeout */
+			status = readw(sb);
+		} while ((status != 0xffff) && !(status & 0x28));
+
+		writew(0xf0, fb);
+
+		/*
+		 * Make sure the command actually makes it to the bus
+		 * before we re-enable interrupts.
+		 */
+		readw(fb);
+
+		if (flags)
+			enable_interrupts();
+
+		if (status != 0xffff) {
+			printf("Flash erase error at address 0x%p: 0x%02x\n",
+			       sb, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (ctrlc())
+		printf("User interrupt!\n");
+
+	return ERR_OK;
+}
+
+int __flashprog write_buff(flash_info_t *info, uchar *src,
+			   ulong addr, ulong count)
+{
+	unsigned long flags;
+	uint16_t *base, *p, *s, *end;
+	uint16_t word, status;
+	int ret = ERR_OK;
+
+	if (addr < info->start[0]
+	    || (addr + count) > (info->start[0] + info->size)
+	    || (addr + count) < addr) {
+		puts("Error: invalid address range\n");
+		return ERR_INVAL;
+	}
+
+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+		puts("Error: misaligned source, destination or count\n");
+		return ERR_ALIGN;
+	}
+
+	base = (uint16_t *)uncached(info->start[0]);
+	end = (uint16_t *)uncached(addr + count);
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+	sync_write_buffer();
+
+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+	     p < end && !ctrlc(); p++, s++) {
+		word = *s;
+
+		writew(0xaa, base + 0x555);
+		writew(0x55, base + 0xaaa);
+		writew(0xa0, base + 0x555);
+		writew(word, p);
+
+		sync_write_buffer();
+
+		/* Wait for completion */
+		do {
+			/* TODO: Timeout */
+			status = readw(p);
+		} while ((status != word) && !(status & 0x28));
+
+		writew(0xf0, base);
+		readw(base);
+
+		if (status != word) {
+			printf("Flash write error at address 0x%p: 0x%02x\n",
+			       p, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (flags)
+		enable_interrupts();
+
+	return ret;
+}
+
+#endif /* CONFIG_ATSTK1000_EXT_FLASH */
diff --git a/board/atstk1000/u-boot.lds.S b/board/atstk1000/u-boot.lds.S
new file mode 100644
index 0000000..d46b82c
--- /dev/null
+++ b/board/atstk1000/u-boot.lds.S
@@ -0,0 +1,79 @@
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = CFG_FLASH_BASE;
+	_text = .;
+	.text : {
+		*(.text)
+		*(.text.*)
+	}
+
+	. = ALIGN(CFG_ICACHE_LINESZ);
+	__flashprog_start = .;
+	.flashprog : {
+		*(.flashprog)
+	}
+	. = ALIGN(CFG_ICACHE_LINESZ);
+	__flashprog_end = .;
+
+	. = ALIGN(8);
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
+	_etext = .;
+
+	__data_lma = ALIGN(8);
+	. = CFG_INTRAM_BASE;
+	_data = .;
+	.data : AT(__data_lma) {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	__u_boot_cmd_lma = __data_lma + (__u_boot_cmd_start - _data);
+	.u_boot_cmd : AT(__u_boot_cmd_lma) {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(8);
+	_edata = .;
+	__edata_lma = __u_boot_cmd_lma + (_edata - __u_boot_cmd_start);
+
+	.bss : AT(__edata_lma) {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
+}
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
new file mode 100644
index 0000000..458ebab
--- /dev/null
+++ b/include/configs/atstk1002.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_ATSTK1002		1
+#define CONFIG_ATSTK1000		1
+
+#define CONFIG_ATSTK1000_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
+ * frequency and the peripherals to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CFG_USART1			1
+
+#define CFG_CONSOLE_UART_DEV		DEVICE_USART1
+
+/* User serviceable stuff */
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyUS0 root=/dev/mtdblock1 fbmem=600k"
+
+#define CONFIG_COMMANDS			(CFG_CMD_BDI			\
+					 | CFG_CMD_LOADS		\
+					 | CFG_CMD_LOADB		\
+					 /* | CFG_CMD_IMI */		\
+					 /* | CFG_CMD_CACHE */		\
+					 | CFG_CMD_FLASH		\
+					 | CFG_CMD_MEMORY		\
+					 /* | CFG_CMD_NET */		\
+					 | CFG_CMD_ENV			\
+					 /* | CFG_CMD_IRQ */		\
+					 | CFG_CMD_BOOTD		\
+					 | CFG_CMD_CONSOLE		\
+					 /* | CFG_CMD_EEPROM */		\
+					 | CFG_CMD_ASKENV		\
+					 | CFG_CMD_RUN			\
+					 | CFG_CMD_ECHO			\
+					 /* | CFG_CMD_I2C */		\
+					 | CFG_CMD_REGINFO		\
+					 /* | CFG_CMD_DATE */		\
+					 /* | CFG_CMD_DHCP */		\
+					 /* | CFG_CMD_AUTOSCRIPT */	\
+					 /* | CFG_CMD_MII */		\
+					 | CFG_CMD_MISC			\
+					 /* | CFG_CMD_SDRAM */		\
+					 /* | CFG_CMD_DIAG */		\
+					 /* | CFG_CMD_HWFLOW */		\
+					 /* | CFG_CMD_SAVES */		\
+					 /* | CFG_CMD_SPI */		\
+					 /* | CFG_CMD_PING */		\
+					 /* | CFG_CMD_MMC */		\
+					 /* | CFG_CMD_FAT */		\
+					 /* | CFG_CMD_IMLS */		\
+					 /* | CFG_CMD_ITEST */		\
+					 /* | CFG_CMD_EXT2 */		\
+		)
+
+#include <cmd_confdefs.h>
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+#define CFG_MALLOC_END							\
+	({								\
+		DECLARE_GLOBAL_DATA_PTR;				\
+		CFG_SDRAM_BASE + gd->sdram_size;			\
+	})
+#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
+
+#define CFG_DMA_ALLOC_LEN		(16384)
+#define CFG_DMA_ALLOC_END		(CFG_MALLOC_START)
+#define CFG_DMA_ALLOC_START		(CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+/* Allow 2MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Uboot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			8
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START						\
+	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+#define CFG_MEMTEST_END							\
+	({								\
+		DECLARE_GLOBAL_DATA_PTR;				\
+		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
+	})
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */