Merge branch 'master' of git://git.denx.de/u-boot-sunxi

185 files changed, 16692 insertions, 1270 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 00be305..eeeaca4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -632,6 +632,11 @@ config TARGET_SOCFPGA_CYCLONE5
 
 config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
+	select DM
+	select DM_GPIO
+	select OF_CONTROL
+	select OF_SEPARATE
+	select SPL_DISABLE_OF_CONTROL
 
 config TARGET_SNOWBALL
 	bool "Support snowball"
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 4bb12ad..6a0299f 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -13,7 +13,7 @@ obj-y	+= clock.o
 obj-y	+= cpu_info.o
 obj-y	+= dram_helpers.o
 obj-y	+= pinmux.o
-obj-y	+= usbc.o
+obj-y	+= usb_phy.o
 obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
@@ -27,6 +27,10 @@ obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
 obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
 obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
 
+obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
+
 ifndef CONFIG_SPL_BUILD
 ifdef CONFIG_ARMV7_PSCI
 obj-y	+= psci.o
@@ -38,6 +42,7 @@ obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
 obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
 obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
 obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
-obj-$(CONFIG_MACH_SUN8I)	+= dram_sun8i.o
+obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
+obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
 obj-y	+= fel_utils.o
 endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index c1b4cf5..6718ae2 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -12,8 +12,6 @@
 
 #include <common.h>
 #include <i2c.h>
-#include <netdev.h>
-#include <miiphy.h>
 #include <serial.h>
 #ifdef CONFIG_SPL_BUILD
 #include <spl.h>
@@ -89,13 +87,14 @@ void spl_board_load_image(void)
 
 void s_init(void)
 {
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
 	/* Magic (undocmented) value taken from boot0, without this DRAM
 	 * access gets messed up (seems cache related) */
 	setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
 #endif
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \
-		defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
+#if defined CONFIG_MACH_SUN6I || \
+    defined CONFIG_MACH_SUN7I || \
+    defined CONFIG_MACH_SUN8I
 	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
 	asm volatile(
 		"mrc p15, 0, r0, c1, c0, 1\n"
@@ -172,7 +171,7 @@ void board_init_f(ulong dummy)
 
 void reset_cpu(ulong addr)
 {
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#ifdef CONFIG_SUNXI_GEN_SUN4I
 	static const struct sunxi_wdog *wdog =
 		 &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
 
@@ -184,7 +183,8 @@ void reset_cpu(ulong addr)
 		/* sun5i sometimes gets stuck without this */
 		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
 	}
-#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	static const struct sunxi_wdog *wdog =
 		 ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
 
@@ -217,14 +217,6 @@ int cpu_eth_init(bd_t *bis)
 	mdelay(200);
 #endif
 
-#ifdef CONFIG_SUNXI_EMAC
-	rc = sunxi_emac_initialize(bis);
-	if (rc < 0) {
-		printf("sunxi: failed to initialize emac\n");
-		return rc;
-	}
-#endif
-
 #ifdef CONFIG_SUNXI_GMAC
 	rc = sunxi_gmac_initialize(bis);
 	if (rc < 0) {
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index e2a7867..3bfa122 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -170,6 +170,24 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
 	udelay(5500);
 }
 
+#ifdef CONFIG_MACH_SUN8I_A33
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (sigma_delta_enable)
+		writel(CCM_PLL11_PATTERN, &ccm->pll5_pattern_cfg);
+
+	writel(CCM_PLL11_CTRL_EN | CCM_PLL11_CTRL_UPD |
+	       (sigma_delta_enable ? CCM_PLL11_CTRL_SIGMA_DELTA_EN : 0) |
+	       CCM_PLL11_CTRL_N(clk / 24000000), &ccm->pll11_cfg);
+
+	while (readl(&ccm->pll11_cfg) & CCM_PLL11_CTRL_UPD)
+		;
+}
+#endif
+
 unsigned int clock_get_pll6(void)
 {
 	struct sunxi_ccm_reg *const ccm =
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index b6cb9de..30ec4ac 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -64,8 +64,10 @@ int print_cpuinfo(void)
 	}
 #elif defined CONFIG_MACH_SUN7I
 	puts("CPU:   Allwinner A20 (SUN7I)\n");
-#elif defined CONFIG_MACH_SUN8I
+#elif defined CONFIG_MACH_SUN8I_A23
 	puts("CPU:   Allwinner A23 (SUN8I)\n");
+#elif defined CONFIG_MACH_SUN8I_A33
+	puts("CPU:   Allwinner A33 (SUN8I)\n");
 #else
 #warning Please update cpu_info.c with correct CPU information
 	puts("CPU:   SUNXI Family\n");
@@ -76,7 +78,7 @@ int print_cpuinfo(void)
 
 int sunxi_get_sid(unsigned int *sid)
 {
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
 #ifdef CONFIG_AXP221_POWER
 	return axp221_get_sid(sid);
 #else
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c
index 3d7964d..3d7964d 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun8i.c
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a23.c
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c
new file mode 100644
index 0000000..d03f00d
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a33.c
@@ -0,0 +1,363 @@
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015      Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+/* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 4
+#define DRAM_SIGMA_DELTA_ENABLE 1
+#define DRAM_ODT_EN 0
+
+struct dram_para {
+	u8 cs1;
+	u8 seq;
+	u8 bank;
+	u8 rank;
+	u8 rows;
+	u8 bus_width;
+	u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+	       MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 |
+	       (para->seq ? MCTL_CR_SEQUENCE : 0) |
+	       ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+	       MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+	       MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+	       &mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+	u8 orig_rank = para->rank;
+	int rows, columns;
+
+	/* Row detect */
+	para->page_size = 512;
+	para->seq = 1;
+	para->rows = 16;
+	para->rank = 1;
+	mctl_set_cr(para);
+	for (rows = 11 ; rows < 16 ; rows++) {
+		if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+			break;
+	}
+
+	/* Column (page size) detect */
+	para->rows = 11;
+	para->page_size = 8192;
+	mctl_set_cr(para);
+	for (columns = 9 ; columns < 13 ; columns++) {
+		if (mctl_mem_matches(1 << columns))
+			break;
+	}
+
+	para->seq = 0;
+	para->rank = orig_rank;
+	para->rows = rows;
+	para->page_size = 1 << columns;
+	mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+	const unsigned int ctrl_freq =
+		CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+	return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	u32 reg_val;
+
+	u8 tccd		= 2;
+	u8 tfaw		= ns_to_t(50);
+	u8 trrd		= max(ns_to_t(10), 4);
+	u8 trcd		= ns_to_t(15);
+	u8 trc		= ns_to_t(53);
+	u8 txp		= max(ns_to_t(8), 3);
+	u8 twtr		= max(ns_to_t(8), 4);
+	u8 trtp		= max(ns_to_t(8), 4);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= ns_to_t(15);
+	u8 tras		= ns_to_t(38);
+
+	u16 trefi	= ns_to_t(7800) / 32;
+	u16 trfc	= ns_to_t(350);
+
+	/* Fixed timing parameters */
+	u8 tmrw		= 0;
+	u8 tmrd		= 4;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 4;
+	u8 trasmax	= 24;
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 4; /* CWL 8 */
+	u8 t_rdata_en	= 4;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (500 * CONFIG_DRAM_CLK) + 1;		/* 500us */
+	u32 tdinit1	= (360 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 360ns */
+	u32 tdinit2	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 2 + twr;	/* WL + BL / 2 + tWR */
+	u8 twr2rd	= tcwl + 2 + twtr; 	/* WL + BL / 2 + tWTR */
+	u8 trd2wr	= tcl + 2 + 1 - tcwl; 	/* RL + BL / 2 + 2 - WL */
+
+	/* Set work mode register */
+	mctl_set_cr(para);
+	/* Set mode register */
+	writel(MCTL_MR0, &mctl_ctl->mr0);
+	writel(MCTL_MR1, &mctl_ctl->mr1);
+	writel(MCTL_MR2, &mctl_ctl->mr2);
+	writel(MCTL_MR3, &mctl_ctl->mr3);
+	/* Set dram timing */
+	reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+	writel(reg_val, &mctl_ctl->dramtmg0);
+	reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+	writel(reg_val, &mctl_ctl->dramtmg1);
+	reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+	writel(reg_val, &mctl_ctl->dramtmg2);
+	reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+	writel(reg_val, &mctl_ctl->dramtmg3);
+	reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+	writel(reg_val, &mctl_ctl->dramtmg4);
+	reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+	writel(reg_val, &mctl_ctl->dramtmg5);
+	/* Set two rank timing and exit self-refresh timing */
+	reg_val = readl(&mctl_ctl->dramtmg8);
+	reg_val &= ~(0xff << 8);
+	reg_val &= ~(0xff << 0);
+	reg_val |= (0x33 << 8);
+	reg_val |= (0x8 << 0);
+	writel(reg_val, &mctl_ctl->dramtmg8);
+	/* Set phy interface time */
+	reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+			| (wr_latency << 0);
+	/* PHY interface write latency and read latency configure */
+	writel(reg_val, &mctl_ctl->pitmg0);
+	/* Set phy time  PTR0-2 use default */
+	writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+	writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+	/* Set refresh timing */
+	reg_val = (trefi << 16) | (trfc << 0);
+	writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	writel(val, &mctl_ctl->pir);
+	mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	if (para->rank == 2)
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+	else
+		clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	mctl_data_train_cfg(para);
+	mctl_set_pir(0x1f3);
+
+	return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+		(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+		(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	u32 low_data_lines_status;  /* Training status of datalines 0 - 7 */
+	u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+
+	auto_set_timing_para(para);
+
+	/* Disable dram VTC */
+	clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0);
+
+	/* Set ODT */
+	if ((CONFIG_DRAM_CLK > 400) && DRAM_ODT_EN) {
+		setbits_le32(DXnGCR0(0), 0x3 << 9);
+		setbits_le32(DXnGCR0(1), 0x3 << 9);
+	} else {
+		clrbits_le32(DXnGCR0(0), 0x3 << 9);
+		clrbits_le32(DXnGCR0(1), 0x3 << 9);
+	}
+
+	/* set PLL configuration */
+	if (CONFIG_DRAM_CLK >= 480)
+		setbits_le32(&mctl_ctl->pllgcr, 0x1 << 18);
+	else
+		setbits_le32(&mctl_ctl->pllgcr, 0x3 << 18);
+
+	/* Auto detect dram config, set 2 rank and 16bit bus-width */
+	para->cs1 = 0;
+	para->rank = 2;
+	para->bus_width = 16;
+	mctl_set_cr(para);
+
+	/* Open DQS gating */
+	clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+	clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+	mctl_data_train_cfg(para);
+
+	/* ZQ calibration */
+	writel(CONFIG_DRAM_ZQ & 0xff, &mctl_ctl->zqcr1);
+	/* CA calibration */
+	mctl_set_pir(0x00000003);
+	/* More ZQ calibration */
+	writel(readl(&mctl_ctl->zqsr0) | 0x10000000, &mctl_ctl->zqcr2);
+	writel((CONFIG_DRAM_ZQ >> 8) & 0xff, &mctl_ctl->zqcr1);
+
+	/* DQS gate training */
+	if (mctl_train_dram(para) != 0) {
+		low_data_lines_status  = (readl(DXnGSR0(0)) >> 24) & 0x03;
+		high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+		if (low_data_lines_status == 0x3)
+			return -EIO;
+
+		/* DRAM has only one rank */
+		para->rank = 1;
+		mctl_set_cr(para);
+
+		if (low_data_lines_status == high_data_lines_status)
+			goto done; /* 16 bit bus, 1 rank */
+
+		if (!(low_data_lines_status & high_data_lines_status)) {
+			/* Retry 16 bit bus-width with CS1 set */
+			para->cs1 = 1;
+			mctl_set_cr(para);
+			if (mctl_train_dram(para) == 0)
+				goto done;
+		}
+
+		/* Try 8 bit bus-width */
+		writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+		para->cs1 = 0;
+		para->bus_width = 8;
+		mctl_set_cr(para);
+		if (mctl_train_dram(para) != 0)
+			return -EIO;
+	}
+done:
+	/* Check the dramc status */
+	mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+	/* Close DQS gating */
+	setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+	/* Enable master access */
+	writel(0xffffffff, &mctl_com->maer);
+
+	return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+	struct sunxi_ccm_reg * const ccm =
+			(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	clrsetbits_le32(&ccm->dram_pll_cfg, CCM_DRAMPLL_CFG_SRC_MASK,
+			CCM_DRAMPLL_CFG_SRC_PLL11);
+
+	clock_set_pll11(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL,
+			DRAM_SIGMA_DELTA_ENABLE);
+
+	clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+			CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+			CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+	mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+	setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+	setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+
+	/* Set dram master access priority */
+	writel(0x0, &mctl_com->mapr);
+	writel(0x0f802f01, &mctl_ctl->sched);
+	writel(0x0000400f, &mctl_ctl->clken);	/* normal */
+
+	udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	struct dram_para para = {
+		.cs1 = 0,
+		.bank = 1,
+		.rank = 1,
+		.rows = 15,
+		.bus_width = 16,
+		.page_size = 2048,
+	};
+
+	mctl_sys_init(&para);
+
+	if (mctl_channel_init(&para) != 0)
+		return 0;
+
+	auto_detect_dram_size(&para);
+
+	/* Enable master software clk */
+	writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+	/* Set DRAM ODT MAP */
+	if (para.rank == 2)
+		writel(0x00000303, &mctl_ctl->odtmap);
+	else
+		writel(0x00000201, &mctl_ctl->odtmap);
+
+	return para.page_size * (para.bus_width / 8) *
+		(1 << (para.bank + para.rank + para.rows));
+}
diff --git a/arch/arm/cpu/armv7/sunxi/pmic_bus.c b/arch/arm/cpu/armv7/sunxi/pmic_bus.c
new file mode 100644
index 0000000..9e05127
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/pmic_bus.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers
+ *
+ * The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
+ * axp223 uses the rsb bus, these functions abstract this.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/rsb.h>
+#include <i2c.h>
+#include <asm/arch/pmic_bus.h>
+
+#define AXP152_I2C_ADDR			0x30
+
+#define AXP209_I2C_ADDR			0x34
+
+#define AXP221_CHIP_ADDR		0x68
+#define AXP221_CTRL_ADDR		0x3e
+#define AXP221_INIT_DATA		0x3e
+
+#define AXP223_DEVICE_ADDR		0x3a3
+#define AXP223_RUNTIME_ADDR		0x2d
+
+int pmic_bus_init(void)
+{
+	/* This cannot be 0 because it is used in SPL before BSS is ready */
+	static int needs_init = 1;
+	__maybe_unused int ret;
+
+	if (!needs_init)
+		return 0;
+
+#ifdef CONFIG_AXP221_POWER
+# ifdef CONFIG_MACH_SUN6I
+	p2wi_init();
+	ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+				       AXP221_INIT_DATA);
+# else
+	ret = rsb_init();
+	if (ret)
+		return ret;
+
+	ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
+# endif
+	if (ret)
+		return ret;
+#endif
+
+	needs_init = 0;
+	return 0;
+}
+
+int pmic_bus_read(u8 reg, u8 *data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP221_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_read(reg, data);
+# else
+	return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_write(u8 reg, u8 data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP221_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_write(reg, data);
+# else
+	return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_setbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	val |= bits;
+	return pmic_bus_write(reg, val);
+}
+
+int pmic_bus_clrbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	val &= ~bits;
+	return pmic_bus_write(reg, val);
+}
diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S
index e0a524e..07b2d76 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.S
+++ b/arch/arm/cpu/armv7/sunxi/psci.S
@@ -254,7 +254,6 @@ _sunxi_cpu_entry:
 	isb
 
 	bl	_nonsec_init
-	bl	psci_arch_init
 
 	adr	r0, _target_pc
 	ldr	r0, [r0]
diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
new file mode 100644
index 0000000..410669e
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -0,0 +1,304 @@
+/*
+ * Sunxi usb-phy code
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <errno.h>
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
+
+#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
+#ifdef CONFIG_MACH_SUN8I_A33
+#define SUNXI_USB_CSR			0x410
+#else
+#define SUNXI_USB_CSR			0x404
+#endif
+#define SUNXI_USB_PASSBY_EN		1
+
+#define SUNXI_EHCI_AHB_ICHR8_EN		(1 << 10)
+#define SUNXI_EHCI_AHB_INCR4_BURST_EN	(1 << 9)
+#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN	(1 << 8)
+#define SUNXI_EHCI_ULPI_BYPASS_EN	(1 << 0)
+
+static struct sunxi_usb_phy {
+	int usb_rst_mask;
+	int gpio_vbus;
+	int gpio_vbus_det;
+	int id;
+	int init_count;
+	int power_on_count;
+} sunxi_usb_phy[] = {
+	{
+		.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
+		.id = 0,
+	},
+	{
+		.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
+		.id = 1,
+	},
+#if CONFIG_SUNXI_USB_PHYS >= 3
+	{
+		.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
+		.id = 2,
+	}
+#endif
+};
+
+static int get_vbus_gpio(int index)
+{
+	switch (index) {
+	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
+	case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+	case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
+	}
+	return -EINVAL;
+}
+
+static int get_vbus_detect_gpio(int index)
+{
+	switch (index) {
+	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+	}
+	return -EINVAL;
+}
+
+static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
+			  int data, int len)
+{
+	int j = 0, usbc_bit = 0;
+	void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
+
+#ifdef CONFIG_MACH_SUN8I_A33
+	/* CSR needs to be explicitly initialized to 0 on A33 */
+	writel(0, dest);
+#endif
+
+	usbc_bit = 1 << (phy->id * 2);
+	for (j = 0; j < len; j++) {
+		/* set the bit address to be written */
+		clrbits_le32(dest, 0xff << 8);
+		setbits_le32(dest, (addr + j) << 8);
+
+		clrbits_le32(dest, usbc_bit);
+		/* set data bit */
+		if (data & 0x1)
+			setbits_le32(dest, 1 << 7);
+		else
+			clrbits_le32(dest, 1 << 7);
+
+		setbits_le32(dest, usbc_bit);
+
+		clrbits_le32(dest, usbc_bit);
+
+		data >>= 1;
+	}
+}
+
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+	/* The following comments are machine
+	 * translated from Chinese, you have been warned!
+	 */
+
+	/* Regulation 45 ohms */
+	if (phy->id == 0)
+		usb_phy_write(phy, 0x0c, 0x01, 1);
+
+	/* adjust PHY's magnitude and rate */
+	usb_phy_write(phy, 0x20, 0x14, 5);
+
+	/* threshold adjustment disconnect */
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
+	usb_phy_write(phy, 0x2a, 3, 2);
+#else
+	usb_phy_write(phy, 0x2a, 2, 2);
+#endif
+
+	return;
+}
+
+static void sunxi_usb_phy_passby(int index, int enable)
+{
+	unsigned long bits = 0;
+	void *addr;
+
+	if (index == 1)
+		addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+	else
+		addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+
+	bits = SUNXI_EHCI_AHB_ICHR8_EN |
+		SUNXI_EHCI_AHB_INCR4_BURST_EN |
+		SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
+		SUNXI_EHCI_ULPI_BYPASS_EN;
+
+	if (enable)
+		setbits_le32(addr, bits);
+	else
+		clrbits_le32(addr, bits);
+
+	return;
+}
+
+void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+	usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
+}
+
+void sunxi_usb_phy_init(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	phy->init_count++;
+	if (phy->init_count != 1)
+		return;
+
+	setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+
+	sunxi_usb_phy_config(phy);
+
+	if (phy->id != 0)
+		sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
+}
+
+void sunxi_usb_phy_exit(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	phy->init_count--;
+	if (phy->init_count != 0)
+		return;
+
+	if (phy->id != 0)
+		sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
+
+	clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+}
+
+void sunxi_usb_phy_power_on(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+	phy->power_on_count++;
+	if (phy->power_on_count != 1)
+		return;
+
+	if (phy->gpio_vbus >= 0)
+		gpio_set_value(phy->gpio_vbus, 1);
+}
+
+void sunxi_usb_phy_power_off(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+	phy->power_on_count--;
+	if (phy->power_on_count != 0)
+		return;
+
+	if (phy->gpio_vbus >= 0)
+		gpio_set_value(phy->gpio_vbus, 0);
+}
+
+int sunxi_usb_phy_vbus_detect(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+	int err, retries = 3;
+
+	if (phy->gpio_vbus_det < 0) {
+		eprintf("Error: invalid vbus detection pin\n");
+		return phy->gpio_vbus_det;
+	}
+
+	err = gpio_get_value(phy->gpio_vbus_det);
+	/*
+	 * Vbus may have been provided by the board and just been turned of
+	 * some milliseconds ago on reset, what we're measuring then is a
+	 * residual charge on Vbus, sleep a bit and try again.
+	 */
+	while (err > 0 && retries--) {
+		mdelay(100);
+		err = gpio_get_value(phy->gpio_vbus_det);
+	}
+
+	return err;
+}
+
+int sunxi_usb_phy_probe(void)
+{
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_usb_phy *phy;
+	int i, ret = 0;
+
+	for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
+		phy = &sunxi_usb_phy[i];
+
+		phy->gpio_vbus = get_vbus_gpio(i);
+		if (phy->gpio_vbus >= 0) {
+			ret = gpio_request(phy->gpio_vbus, "usb_vbus");
+			if (ret)
+				return ret;
+			ret = gpio_direction_output(phy->gpio_vbus, 0);
+			if (ret)
+				return ret;
+		}
+
+		phy->gpio_vbus_det = get_vbus_detect_gpio(i);
+		if (phy->gpio_vbus_det >= 0) {
+			ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
+			if (ret)
+				return ret;
+			ret = gpio_direction_input(phy->gpio_vbus_det);
+			if (ret)
+				return ret;
+		}
+	}
+
+	setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+	return 0;
+}
+
+int sunxi_usb_phy_remove(void)
+{
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_usb_phy *phy;
+	int i;
+
+	clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+	for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
+		phy = &sunxi_usb_phy[i];
+
+		if (phy->gpio_vbus >= 0)
+			gpio_free(phy->gpio_vbus);
+
+		if (phy->gpio_vbus_det >= 0)
+			gpio_free(phy->gpio_vbus_det);
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c
deleted file mode 100644
index a0e9604..0000000
--- a/arch/arm/cpu/armv7/sunxi/usbc.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Sunxi usb-controller code shared between the ehci and musb controllers
- *
- * Copyright (C) 2014 Roman Byshko
- *
- * Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usbc.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <common.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
-
-#define SUNXI_USB_PMU_IRQ_ENABLE	0x800
-#define SUNXI_USB_CSR			0x404
-#define SUNXI_USB_PASSBY_EN		1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN		(1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN	(1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN	(1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN	(1 << 0)
-
-static struct sunxi_usbc_hcd {
-	struct usb_hcd *hcd;
-	int usb_rst_mask;
-	int ahb_clk_mask;
-	int gpio_vbus;
-	int gpio_vbus_det;
-	int irq;
-	int id;
-} sunxi_usbc_hcd[] = {
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB0,
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-		.irq = 71,
-#else
-		.irq = 38,
-#endif
-		.id = 0,
-	},
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-		.irq = 72,
-#else
-		.irq = 39,
-#endif
-		.id = 1,
-	},
-#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
-	{
-		.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
-		.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
-#ifdef CONFIG_MACH_SUN6I
-		.irq = 74,
-#else
-		.irq = 40,
-#endif
-		.id = 2,
-	}
-#endif
-};
-
-static int enabled_hcd_count;
-
-void *sunxi_usbc_get_io_base(int index)
-{
-	switch (index) {
-	case 0:
-		return (void *)SUNXI_USB0_BASE;
-	case 1:
-		return (void *)SUNXI_USB1_BASE;
-	case 2:
-		return (void *)SUNXI_USB2_BASE;
-	default:
-		return NULL;
-	}
-}
-
-static int get_vbus_gpio(int index)
-{
-	switch (index) {
-	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
-	case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
-	case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
-	}
-	return -1;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
-	switch (index) {
-	case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
-	}
-	return -1;
-}
-
-static void usb_phy_write(struct sunxi_usbc_hcd *sunxi_usbc, int addr,
-			  int data, int len)
-{
-	int j = 0, usbc_bit = 0;
-	void *dest = sunxi_usbc_get_io_base(0) + SUNXI_USB_CSR;
-
-	usbc_bit = 1 << (sunxi_usbc->id * 2);
-	for (j = 0; j < len; j++) {
-		/* set the bit address to be written */
-		clrbits_le32(dest, 0xff << 8);
-		setbits_le32(dest, (addr + j) << 8);
-
-		clrbits_le32(dest, usbc_bit);
-		/* set data bit */
-		if (data & 0x1)
-			setbits_le32(dest, 1 << 7);
-		else
-			clrbits_le32(dest, 1 << 7);
-
-		setbits_le32(dest, usbc_bit);
-
-		clrbits_le32(dest, usbc_bit);
-
-		data >>= 1;
-	}
-}
-
-static void sunxi_usb_phy_init(struct sunxi_usbc_hcd *sunxi_usbc)
-{
-	/* The following comments are machine
-	 * translated from Chinese, you have been warned!
-	 */
-
-	/* Regulation 45 ohms */
-	if (sunxi_usbc->id == 0)
-		usb_phy_write(sunxi_usbc, 0x0c, 0x01, 1);
-
-	/* adjust PHY's magnitude and rate */
-	usb_phy_write(sunxi_usbc, 0x20, 0x14, 5);
-
-	/* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
-	usb_phy_write(sunxi_usbc, 0x2a, 3, 2);
-#else
-	usb_phy_write(sunxi_usbc, 0x2a, 2, 2);
-#endif
-
-	return;
-}
-
-static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable)
-{
-	unsigned long bits = 0;
-	void *addr = sunxi_usbc_get_io_base(sunxi_usbc->id) +
-		     SUNXI_USB_PMU_IRQ_ENABLE;
-
-	bits = SUNXI_EHCI_AHB_ICHR8_EN |
-		SUNXI_EHCI_AHB_INCR4_BURST_EN |
-		SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
-		SUNXI_EHCI_ULPI_BYPASS_EN;
-
-	if (enable)
-		setbits_le32(addr, bits);
-	else
-		clrbits_le32(addr, bits);
-
-	return;
-}
-
-void sunxi_usbc_enable_squelch_detect(int index, int enable)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	usb_phy_write(sunxi_usbc, 0x3c, enable ? 0 : 2, 2);
-}
-
-int sunxi_usbc_request_resources(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int ret = 0;
-
-	sunxi_usbc->gpio_vbus = get_vbus_gpio(index);
-	if (sunxi_usbc->gpio_vbus != -1) {
-		ret |= gpio_request(sunxi_usbc->gpio_vbus, "usbc_vbus");
-		ret |= gpio_direction_output(sunxi_usbc->gpio_vbus, 0);
-	}
-
-	sunxi_usbc->gpio_vbus_det = get_vbus_detect_gpio(index);
-	if (sunxi_usbc->gpio_vbus_det != -1) {
-		ret |= gpio_request(sunxi_usbc->gpio_vbus_det, "usbc_vbus_det");
-		ret |= gpio_direction_input(sunxi_usbc->gpio_vbus_det);
-	}
-
-	return ret;
-}
-
-int sunxi_usbc_free_resources(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int ret = 0;
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		ret |= gpio_free(sunxi_usbc->gpio_vbus);
-
-	if (sunxi_usbc->gpio_vbus_det != -1)
-		ret |= gpio_free(sunxi_usbc->gpio_vbus_det);
-
-	return ret;
-}
-
-void sunxi_usbc_enable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
-	/* enable common PHY only once */
-	if (enabled_hcd_count == 0)
-		setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
-	setbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
-	setbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-	setbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
-#endif
-
-	sunxi_usb_phy_init(sunxi_usbc);
-
-	if (sunxi_usbc->id != 0)
-		sunxi_usb_passby(sunxi_usbc, SUNXI_USB_PASSBY_EN);
-
-	enabled_hcd_count++;
-}
-
-void sunxi_usbc_disable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
-	if (sunxi_usbc->id != 0)
-		sunxi_usb_passby(sunxi_usbc, !SUNXI_USB_PASSBY_EN);
-
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
-	clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_usbc->ahb_clk_mask);
-#endif
-	clrbits_le32(&ccm->ahb_gate0, sunxi_usbc->ahb_clk_mask);
-	clrbits_le32(&ccm->usb_clk_cfg, sunxi_usbc->usb_rst_mask);
-
-	/* disable common PHY only once, for the last enabled hcd */
-	if (enabled_hcd_count == 1)
-		clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
-	enabled_hcd_count--;
-}
-
-void sunxi_usbc_vbus_enable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		gpio_set_value(sunxi_usbc->gpio_vbus, 1);
-}
-
-void sunxi_usbc_vbus_disable(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-
-	if (sunxi_usbc->gpio_vbus != -1)
-		gpio_set_value(sunxi_usbc->gpio_vbus, 0);
-}
-
-int sunxi_usbc_vbus_detect(int index)
-{
-	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
-	int err, retries = 3;
-
-	if (sunxi_usbc->gpio_vbus_det == -1) {
-		eprintf("Error: invalid vbus detection pin\n");
-		return -1;
-	}
-
-	err = gpio_get_value(sunxi_usbc->gpio_vbus_det);
-	/*
-	 * Vbus may have been provided by the board and just been turned of
-	 * some milliseconds ago on reset, what we're measuring then is a
-	 * residual charge on Vbus, sleep a bit and try again.
-	 */
-	while (err > 0 && retries--) {
-		mdelay(100);
-		err = gpio_get_value(sunxi_usbc->gpio_vbus_det);
-	}
-
-	return err;
-}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 46a6171..15d60b9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1,4 +1,3 @@
-dtb-$(CONFIG_MACH_SUN7I) +=  sun7i-a20-pcduino3.dtb
 dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
 dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
 dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
@@ -58,6 +57,78 @@ dtb-$(CONFIG_SOCFPGA) +=				\
 dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
 	ls1021a-twr.dtb
 
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet-3f.dtb \
+	sun4i-a10-inet-3w.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a13-ampe-a76.dtb \
+	sun5i-a13-forfun-q88db.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-86vs.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-tzx-q8-713b7.dtb \
+	sun5i-a13-utoo-p66.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mixtile-loftq.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-primo81.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-ainol-aw1.dtb \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-m5.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-primo73.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb \
+	sun7i-a20-yones-toptech-bd1078.dtb
+dtb-$(CONFIG_MACH_SUN8I_A23) += \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb
+dtb-$(CONFIG_MACH_SUN8I_A33) += \
+	sun8i-a33-astar-mid756.dtb \
+	sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+
 targets += $(dtb-y)
 
 DTC_FLAGS += -R 4 -p 0x1000
diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi
new file mode 100644
index 0000000..c20cf53
--- /dev/null
+++ b/arch/arm/dts/axp209.dtsi
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+		};
+	};
+};
diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
new file mode 100644
index 0000000..f032814
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a1000>;
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "a1000:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_a1000>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_a1000: emac_power_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_a1000: led_pins@0 {
+		allwinner,pins = "PH10", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 0000000..1a3c7dd
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 0000000..35fb163
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
new file mode 100644
index 0000000..0ba67d7
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		blue {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		green {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts
new file mode 100644
index 0000000..fbd638a
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   bma250 IRQs
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+
+		/*
+		 * TODO: interrupt pins:
+		 * int1 - PH00
+		 * int2 - PI10
+		 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+
+	status = "okay";
+
+	button@158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button@1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts
new file mode 100644
index 0000000..f443788
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-hackberry.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hackberry_hogs>;
+
+	hackberry_hogs: hogs@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 0000000..9f06b18
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb2_vbus_pin_a {
+	allwinner,pins = "PH6";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-inet-3f.dts b/arch/arm/dts/sun4i-a10-inet-3f.dts
new file mode 100644
index 0000000..d2805c5
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-inet-3f.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 3F for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+
+/ {
+	model = "iNet 3F";
+	compatible = "inet,3f", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-inet-3w.dts b/arch/arm/dts/sun4i-a10-inet-3w.dts
new file mode 100644
index 0000000..96fa826
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-inet-3w.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 3W for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+
+/ {
+	model = "iNet 3W";
+	compatible = "inet,3w", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts
new file mode 100644
index 0000000..e19ef52
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 0000000..1b0452f
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_q5>;
+
+		green {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_q5>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_q5: emac_power_pin@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_q5: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
new file mode 100644
index 0000000..00c54d2
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-marsboard.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_marsboard>;
+
+		red1 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		red2 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		red3 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		red4 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_marsboard: led_pins@0 {
+		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts
new file mode 100644
index 0000000..0f24914
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&ir0_pins_a {
+	/* The ir receiver is not always populated */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts
new file mode 100644
index 0000000..0f1c991
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-mk802.dts
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_mk802>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-mk802ii.dts b/arch/arm/dts/sun4i-a10-mk802ii.dts
new file mode 100644
index 0000000..f97aa6f
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-mk802ii.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 0000000..5840d5e
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+	cooling-max-level = <2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 0000000..be6948e
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino>;
+
+		tx {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_pcduino: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	key_pins_pcduino: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi
new file mode 100644
index 0000000..1d7fd68
--- /dev/null
+++ b/arch/arm/dts/sun4i-a10.dtsi
@@ -0,0 +1,1046 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@3 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1008000 1400000
+				912000  1350000
+				864000  1300000
+				624000  1250000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
+				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
+				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
+				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
+				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
+				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
+				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
+				"apb0_ir1", "apb0_keypad";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_can", "apb1_scr",
+				"apb1_ps20", "apb1_ps21", "apb1_uart0",
+				"apb1_uart1", "apb1_uart2", "apb1_uart3",
+				"apb1_uart4", "apb1_uart5", "apb1_uart6",
+				"apb1_uart7";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		pata_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "pata";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		ir1_clk: clk@01c200b4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir1";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
+		spi3_clk: clk@01c200d4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200d4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi3";
+		};
+	};
+
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio: mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PA10", "PA11";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			ir0_pins_a: ir0@0 {
+				allwinner,pins = "PB3","PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				allwinner,pins = "PB22","PB23";
+				allwinner,function = "ir1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_pins_a: spi0@0 {
+				allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_b: spi2@1 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@01c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ps20: ps2@01c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&apb1_gates 6>;
+			status = "disabled";
+		};
+
+		ps21: ps2@01c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&apb1_gates 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 0000000..ceb0582
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		red {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+		allwinner,pins = "PB18";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_t004: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts
new file mode 100644
index 0000000..e1a11e1
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s-mk802.dts
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_mk802>;
+
+		red {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_mk802: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_mk802>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 0000000..85a8745
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "at,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PE3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 0000000..9980969
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_r7: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_r7>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi
new file mode 100644
index 0000000..a78c95d
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s.dtsi
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+				"apb0_ir", "apb0_keypad";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3";
+		};
+	};
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio: mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
+
+	uart0_pins_a: uart0@0 {
+		allwinner,pins = "PB19", "PB20";
+		allwinner,function = "uart0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	uart2_pins_a: uart2@0 {
+		allwinner,pins = "PC18", "PC19";
+		allwinner,function = "uart2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	uart3_pins_a: uart3@0 {
+		allwinner,pins = "PG9", "PG10";
+		allwinner,function = "uart3";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	emac_pins_a: emac0@0 {
+		allwinner,pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc1_pins_a: mmc1@0 {
+		allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+		allwinner,function = "mmc1";
+		allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
diff --git a/arch/arm/dts/sun5i-a13-ampe-a76.dts b/arch/arm/dts/sun5i-a13-ampe-a76.dts
new file mode 100644
index 0000000..f216f27
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-ampe-a76.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Ampe A76 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "Ampe A76";
+	compatible = "ampe,a76", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-forfun-q88db.dts b/arch/arm/dts/sun5i-a13-forfun-q88db.dts
new file mode 100644
index 0000000..24de86c
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-forfun-q88db.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Forfun Q88db for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "Forfun Q88db";
+	compatible = "forfun,q88db", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-hsg-h702.dts b/arch/arm/dts/sun5i-a13-hsg-h702.dts
new file mode 100644
index 0000000..adf78a2
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-inet-86vs.dts b/arch/arm/dts/sun5i-a13-inet-86vs.dts
new file mode 100644
index 0000000..d073294
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-inet-86vs.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the iNet 86VS for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "iNet 86VS";
+	compatible = "inet,86vs", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 0000000..4a00bce
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxinom: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts
new file mode 100644
index 0000000..4440156
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-olinuxino.dts
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		power {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts b/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts
new file mode 100644
index 0000000..47f630e
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the TZX Q8 713b7 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+
+/ {
+	model = "TZX Q8 713b7";
+	compatible = "tzx,q8-713b7", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 0000000..6e19f78
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&pio {
+	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		allwinner,pins = "PG10", "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi
new file mode 100644
index 0000000..0188dee
--- /dev/null
+++ b/arch/arm/dts/sun5i-a13.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
+				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
+				"ahb_de_fe", "ahb_iep", "ahb_mali400";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
+		};
+	};
+};
+
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points = <
+		/* kHz    uV */
+		1008000 1400000
+		912000  1350000
+		864000  1300000
+		624000  1200000
+		576000  1200000
+		432000  1200000
+		>;
+	#cooling-cells = <2>;
+	cooling-min-level = <0>;
+	cooling-max-level = <5>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
+
+	uart1_pins_a: uart1@0 {
+		allwinner,pins = "PE10", "PE11";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	uart1_pins_b: uart1@1 {
+		allwinner,pins = "PG3", "PG4";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi
new file mode 100644
index 0000000..96b20d6
--- /dev/null
+++ b/arch/arm/dts/sun5i.dtsi
@@ -0,0 +1,611 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+					"PC10", "PC11", "PC12", "PC13",
+					"PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+	};
+};
diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 0000000..b7b1df4
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&pio {
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a>;
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
new file mode 100644
index 0000000..95d7ec2
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "fail";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_colombus>;
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
new file mode 100644
index 0000000..1e820bc
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+	vmmc-supply = <&vcc_3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	/* external pull-ups missing for some pins */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+	vmmc-supply = <&vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+		allwinner,pins = "PG10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp221: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		dcdc1-supply = <&vcc_3v0>;
+		dcdc5-supply = <&vcc_dram>;
+
+		regulators {
+			x-powers,dcdc-freq = <3000>;
+
+			vcc_3v0: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v0";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			vdd_gpu: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			vdd_sys_dll: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-dll";
+			};
+
+			vcc_dram: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc-dram";
+			};
+
+			vcc_wifi: aldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+			};
+
+			avcc: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+		};
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	/* different pin from sunxi-common-regulators */
+	allwinner,pins = "PH24";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts
new file mode 100644
index 0000000..ce37d69
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-i7.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i7>;
+
+		blue {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_i7: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_i7>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts
new file mode 100644
index 0000000..29f5fc7
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-m9.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele M9 / A1000G Quad top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
+
+		blue {
+			label = "m9:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_m9: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31-mixtile-loftq.dts b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
new file mode 100644
index 0000000..658ffce
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Mixtile LOFT-Q for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+
+/ {
+	model = "Mixtile LOFT-Q";
+	compatible = "mixtile,loft-q", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
new file mode 100644
index 0000000..25a97f0
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -0,0 +1,1060 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1008000	1200000
+				864000  1200000
+				720000  1100000
+				480000  1000000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi2";
+		};
+
+		spi3_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi3";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+					     "usb_ohci0", "usb_ohci1",
+					     "usb_ohci2";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+
+			/* DMA controller requires AHB1 clocked from PLL6 */
+			assigned-clocks = <&ahb1>;
+			assigned-clock-parents = <&pll6 0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb1_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 11>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>,
+				 <&usb_clk 10>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>,
+				 <&usb_clk 2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 27>;
+			resets = <&ahb1_rst 27>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
+			resets = <&ahb1_rst 30>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@01c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
+			resets = <&ahb1_rst 31>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH14", "PH15";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH16", "PH17";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PH18", "PH19";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				allwinner,function = "gmac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 21>;
+			resets = <&apb2_rst 21>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 0>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 1>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 2>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 3>;
+			resets = <&apb2_rst 3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@01c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ahb1_rst 17>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 19>;
+			resets = <&ahb1_rst 19>;
+		};
+
+		spi0: spi@01c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 20>;
+			status = "disabled";
+		};
+
+		spi1: spi@01c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 21>;
+			status = "disabled";
+		};
+
+		spi2: spi@01c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 22>;
+			status = "disabled";
+		};
+
+		spi3: spi@01c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 23>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&osc32k>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@01f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@01f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				allwinner,pins = "PL4";
+				allwinner,function = "s_ir";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			p2wi_pins: p2wi {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_p2wi";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		p2wi: i2c@01f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts
new file mode 100644
index 0000000..68cb2bf
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31s-cs908.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts
new file mode 100644
index 0000000..cfdc03e
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31s-primo81.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the MSI Primo81 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+/ {
+	model = "MSI Primo81";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun6i-a31s.dtsi b/arch/arm/dts/sun6i-a31s.dtsi
new file mode 100644
index 0000000..eaf5ec8
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31s.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
diff --git a/arch/arm/dts/sun7i-a20-ainol-aw1.dts b/arch/arm/dts/sun7i-a20-ainol-aw1.dts
new file mode 100644
index 0000000..8b730cd
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-ainol-aw1.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Ainol AW1 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Ainol AW1";
+	compatible = "ainol,aw1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
new file mode 100644
index 0000000..b952ac4
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapi>;
+
+		green {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	gmac_power_pin_bananapi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bananapi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
new file mode 100644
index 0000000..9d9027f
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapro>;
+
+		blue {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapro>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_bananapro>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_bananapro: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bananapro: led_pins@0 {
+		allwinner,pins = "PH24", "PG2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH0";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_pin_bananapro: vmmc3_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 0000000..3c817ac
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,216 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard2: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 0000000..613a19e
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_cubietruck>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_cubietruck: vmmc3_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_cubietruck: led_pins@0 {
+		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
new file mode 100644
index 0000000..d3f15c2
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: mmc3_vdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: gmac_vdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	/* phy reset config */
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+	snps,reset-active-low;
+	/* wait 1s after reset, otherwise fail to read phy id */
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+		allwinner,pins = "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 0000000..3f99b3f
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i12_tvbox>;
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 / AP6330 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+		allwinner,pins = "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_i12_tvbox: led_pins@0 {
+		allwinner,pins = "PH9", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
new file mode 100644
index 0000000..f2fb26e
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-m3.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m3>;
+
+		blue {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_m3: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-m5.dts b/arch/arm/dts/sun7i-a20-m5.dts
new file mode 100644
index 0000000..c4aed8c
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-m5.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Mele M5 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Mele M5";
+	compatible = "mele,m5", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts
new file mode 100644
index 0000000..f3f9eeb
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-mk808c.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the MK808C for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "MK808C";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 0000000..6592cb2
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,183 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 0000000..3a7a2c2
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		acin-supply = <&reg_axp_ipsout>;
+		vin2-supply = <&reg_axp_ipsout>;
+		vin3-supply = <&reg_axp_ipsout>;
+		ldo24in-supply = <&reg_axp_ipsout>;
+		ldo3in-supply = <&reg_axp_ipsout>;
+
+		regulators {
+			vdd_rtc: ldo1 {
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_csi0: ldo3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			vcc_csi1: ldo4 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-always-on;
+			};
+
+			vdd_int: dcdc3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 0000000..82802b6
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,285 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button@795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button@1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button@1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 0000000..0556938
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		blue {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24", "PH25";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
new file mode 100644
index 0000000..7e6405c
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 0000000..810c5f7
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3_nano>;
+
+		/* Marked "LED3" on the PCB. */
+		usr1 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		/* Marked "LED4" on the PCB. */
+		usr2 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_pcduino3_nano: led_pins@0 {
+		allwinner,pins = "PH16", "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index f7cc8e7..cd05267 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -2,125 +2,69 @@
  * Copyright 2014 Zoltan HERPAI
  * Zoltan HERPAI <wigyori@uid0.hu>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "LinkSprite pcDuino3";
 	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
 
-	chosen {
-		stdout-path = &uart0;
+	aliases {
+		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PH2";
-			};
-
-			led_pins_pcduino3: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			key_pins_pcduino3: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -161,17 +105,114 @@
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ahci_pwr_pin_a {
+	allwinner,pins = "PH2";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_pcduino3: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 0>;
-		status = "okay";
+	key_pins_pcduino3: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts
new file mode 100644
index 0000000..0658f82
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-primo73.dts
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "MSI Primo73 tablet";
+	compatible = "msi,primo73", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			/* rtl8188etv wifi is connected here */
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH12";
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		gpio = <&pio 7 12 0>; /* PH12 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 0000000..2ad3b09
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,188 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button@761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 0000000..e7d84fe
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Wits Pro A20 DKT for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts b/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts
new file mode 100644
index 0000000..759ec9d
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Yones Toptech BD1078 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+
+/ {
+	model = "Yones Toptech BD1078";
+	compatible = "yones,toptech-bd1078", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 4011628..d4ba772 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -3,39 +3,119 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
 
 	aliases {
 		ethernet0 = &gmac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				960000  1400000
+				912000  1400000
+				864000  1300000
+				720000  1200000
+				528000  1100000
+				312000  1000000
+				144000  900000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <6>;
 		};
 
 		cpu@1 {
@@ -45,22 +125,54 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks {
@@ -186,19 +298,11 @@
 				"apb0_iis2", "apb0_keypad";
 		};
 
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
+		apb1: clk@01c20058 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
 			clock-output-names = "apb1";
 		};
 
@@ -232,35 +336,43 @@
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -346,7 +458,7 @@
 
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			compatible = "allwinner,sun5i-a13-mbus-clk";
 			reg = <0x01c2015c 0x4>;
 			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
 			clock-output-names = "mbus";
@@ -409,26 +521,71 @@
 		};
 	};
 
+	/*
+	 * Note we use the address where the mmio registers start, not where
+	 * the SRAM blocks start, this cannot be changed because that would be
+	 * a devicetree ABI change.
+	 */
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		sram@00000000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00000000 0x4000>;
+			allwinner,sram-name = "A1";
+		};
+
+		sram@00004000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00004000 0x4000>;
+			allwinner,sram-name = "A2";
+		};
+
+		sram@00008000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00008000 0x4000>;
+			allwinner,sram-name = "A3-A4";
+		};
+
+		sram@00010000 {
+			compatible = "allwinner,sun4i-a10-sram";
+			reg = <0x00010000 0x1000>;
+			allwinner,sram-name = "D";
+		};
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+		};
+
 		nmi_intc: interrupt-controller@01c00030 {
 			compatible = "allwinner,sun7i-a20-sc-nmi";
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x01c00030 0x0c>;
-			interrupts = <0 0 4>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
 		};
 
 		spi0: spi@01c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
-			interrupts = <0 10 4>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -437,9 +594,12 @@
 		spi1: spi@01c06000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c06000 0x1000>;
-			interrupts = <0 11 4>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -448,12 +608,12 @@
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 17>;
 			status = "disabled";
 		};
 
-		mdio@01c0b080 {
+		mdio: mdio@01c0b080 {
 			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
@@ -464,37 +624,69 @@
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 32 4>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 33 4>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 34 4>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 35 4>;
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c13400 {
@@ -504,15 +696,15 @@
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
 
 		ehci0: usb@01c14000 {
 			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 			reg = <0x01c14000 0x100>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 1>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
@@ -522,7 +714,7 @@
 		ohci0: usb@01c14400 {
 			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 			reg = <0x01c14400 0x100>;
-			interrupts = <0 64 4>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&usb_clk 6>, <&ahb_gates 2>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
@@ -532,9 +724,12 @@
 		spi2: spi@01c17000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
-			interrupts = <0 12 4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,7 +738,7 @@
 		ahci: sata@01c18000 {
 			compatible = "allwinner,sun4i-a10-ahci";
 			reg = <0x01c18000 0x1000>;
-			interrupts = <0 56 4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pll6 0>, <&ahb_gates 25>;
 			status = "disabled";
 		};
@@ -551,7 +746,7 @@
 		ehci1: usb@01c1c000 {
 			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
 			reg = <0x01c1c000 0x100>;
-			interrupts = <0 40 4>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 3>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
@@ -561,7 +756,7 @@
 		ohci1: usb@01c1c400 {
 			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&usb_clk 7>, <&ahb_gates 4>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
@@ -571,9 +766,12 @@
 		spi3: spi@01c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
-			interrupts = <0 50 4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 23>, <&spi3_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -582,7 +780,7 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 4>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -593,64 +791,99 @@
 			pwm0_pins_a: pwm0@0 {
 				allwinner,pins = "PB2";
 				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			pwm1_pins_a: pwm1@0 {
 				allwinner,pins = "PI3";
 				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PB22", "PB23";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart2_pins_a: uart2@0 {
 				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
 				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_b: uart3@1 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart5_pins_a: uart5@0 {
+				allwinner,pins = "PI10", "PI11";
+				allwinner,function = "uart5";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart6_pins_a: uart6@0 {
 				allwinner,pins = "PI12", "PI13";
 				allwinner,function = "uart6";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart7_pins_a: uart7@0 {
 				allwinner,pins = "PI20", "PI21";
 				allwinner,function = "uart7";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PB0", "PB1";
 				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PB18", "PB19";
 				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PB20", "PB21";
 				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PI0", "PI1";
+				allwinner,function = "i2c3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			emac_pins_a: emac0@0 {
@@ -660,22 +893,22 @@
 						"PA11", "PA12", "PA13", "PA14",
 						"PA15", "PA16";
 				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			clk_out_a_pins_a: clk_out_a@0 {
 				allwinner,pins = "PI12";
 				allwinner,function = "clk_out_a";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			clk_out_b_pins_a: clk_out_b@0 {
 				allwinner,pins = "PI13";
 				allwinner,function = "clk_out_b";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_pins_mii_a: gmac_mii@0 {
@@ -685,8 +918,8 @@
 						"PA11", "PA12", "PA13", "PA14",
 						"PA15", "PA16";
 				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			gmac_pins_rgmii_a: gmac_rgmii@0 {
@@ -700,69 +933,104 @@
 				 * data lines in RGMII mode use DDR mode
 				 * and need a higher signal drive strength
 				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_pins_a: spi0@0 {
+				allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi1_pins_a: spi1@0 {
 				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
 				allwinner,function = "spi1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_a: spi2@0 {
 				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
 				allwinner,function = "spi2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_b: spi2@1 {
+				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
 				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
 				allwinner,pins = "PH1";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc3_pins_a: mmc3@0 {
 				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
 				allwinner,function = "mmc3";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			ir0_pins_a: ir0@0 {
 				    allwinner,pins = "PB3","PB4";
 				    allwinner,function = "ir0";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			ir1_pins_a: ir1@0 {
 				    allwinner,pins = "PB22","PB23";
 				    allwinner,function = "ir1";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 4>,
-				     <0 23 4>,
-				     <0 24 4>,
-				     <0 25 4>,
-				     <0 67 4>,
-				     <0 68 4>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
@@ -774,7 +1042,7 @@
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 4>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pwm: pwm@01c20e00 {
@@ -789,7 +1057,7 @@
 			compatible = "allwinner,sun4i-a10-ir";
 			clocks = <&apb0_gates 6>, <&ir0_clk>;
 			clock-names = "apb", "ir";
-			interrupts = <0 5 4>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c21800 0x40>;
 			status = "disabled";
 		};
@@ -798,26 +1066,34 @@
 			compatible = "allwinner,sun4i-a10-ir";
 			clocks = <&apb0_gates 7>, <&ir1_clk>;
 			clock-names = "apb", "ir";
-			interrupts = <0 6 4>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c21c00 0x40>;
 			status = "disabled";
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
 		};
 
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 4>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -827,7 +1103,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 4>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -837,7 +1113,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 4>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -847,7 +1123,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -857,7 +1133,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 4>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -867,7 +1143,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -877,7 +1153,7 @@
 		uart6: serial@01c29800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 4>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 22>;
@@ -887,7 +1163,7 @@
 		uart7: serial@01c29c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 4>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 23>;
@@ -897,9 +1173,8 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 4>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -908,9 +1183,8 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -919,9 +1193,8 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 4>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -930,9 +1203,8 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 4>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 3>;
-			clock-frequency = <100000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -941,9 +1213,8 @@
 		i2c4: i2c@01c2c000 {
 			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2c000 0x400>;
-			interrupts = <0 89 4>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 15>;
-			clock-frequency = <100000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -952,7 +1223,7 @@
 		gmac: ethernet@01c50000 {
 			compatible = "allwinner,sun7i-a20-gmac";
 			reg = <0x01c50000 0x10000>;
-			interrupts = <0 85 4>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
@@ -967,10 +1238,10 @@
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 4>,
-				     <0 82 4>,
-				     <0 83 4>,
-				     <0 84 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 28>;
 		};
 
@@ -982,7 +1253,23 @@
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		ps20: ps2@01c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 6>;
+			status = "disabled";
+		};
+
+		ps21: ps2@01c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 7>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
new file mode 100644
index 0000000..dd31c53
--- /dev/null
+++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
+ * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
+ * and it uses different camera sensors.
+ */
+
+#include "sun8i-a23-ippo-q8h-v5.dts"
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v1.2)";
+	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
+};
diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
new file mode 100644
index 0000000..f5658d1
--- /dev/null
+++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v5)";
+	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	/* pull-ups and devices require PMIC regulator */
+	status = "failed";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi
new file mode 100644
index 0000000..6d6eda3
--- /dev/null
+++ b/arch/arm/dts/sun8i-a23.dtsi
@@ -0,0 +1,633 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll5: pll5_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_spinlock",
+					"ahb1_drc";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_pio",
+					"apb1_daudio0",	"apb1_daudio1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2",
+					"apb2_uart3", "apb2_uart4";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a23-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 0>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 1>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 2>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@01f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@01f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_uart_pins_a: r_uart@0 {
+				allwinner,pins = "PL2", "PL3";
+				allwinner,function = "s_uart";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/sun8i-a33-astar-mid756.dts b/arch/arm/dts/sun8i-a33-astar-mid756.dts
new file mode 100644
index 0000000..d9ce446
--- /dev/null
+++ b/arch/arm/dts/sun8i-a33-astar-mid756.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Astar MID756 for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+
+/ {
+	model = "Astar MID756";
+	compatible = "astar,mid756", "allwinner,sun8i-a23";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts
new file mode 100644
index 0000000..4a43187
--- /dev/null
+++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Minimal dts file for the Ippo Q8H V1.2 (A33, 1024x600) for u-boot only
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+
+/ {
+	model = "Ippo Q8H V1.2 (A33, 1024x600)";
+	compatible = "ippo,q8h-v1.2-a33-lcd1024x600", "allwinner,sun8i-a23";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts
new file mode 100644
index 0000000..6484dcf
--- /dev/null
+++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&pio {
+	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts
new file mode 100644
index 0000000..e463138
--- /dev/null
+++ b/arch/arm/dts/sun9i-a80-optimus.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_optimus>;
+
+		/* The LED names match those found on the board */
+
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* led3 is on PM15, in R_PIO */
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_pin_optimus>;
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&i2c3_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_optimus: led-pins@0 {
+		allwinner,pins = "PH0", "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart4_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
new file mode 100644
index 0000000..d3dece2
--- /dev/null
+++ b/arch/arm/dts/sun9i-a80.dtsi
@@ -0,0 +1,764 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton64.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x103>;
+		};
+	};
+
+	memory {
+		/* 8GB max. with LPAE */
+		reg = <0 0x20000000 0x02 0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		usb_mod_clk: clk@00a08000 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-mod-clk";
+			reg = <0x00a08000 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb0_ahb", "usb_ohci0",
+					     "usb1_ahb", "usb_ohci1",
+					     "usb2_ahb", "usb_ohci2";
+		};
+
+		usb_phy_clk: clk@00a08004 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-phy-clk";
+			reg = <0x00a08004 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb_phy0", "usb_hsic1_480M",
+					     "usb_phy1", "usb_hsic2_480M",
+					     "usb_phy2", "usb_hsic_12M";
+		};
+
+		pll4: clk@0600000c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x0600000c 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll12: clk@0600002c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x0600002c 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll12";
+		};
+
+		gt_clk: clk@0600005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-gt-clk";
+			reg = <0x0600005c 0x4>;
+			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "gt";
+		};
+
+		ahb0: clk@06000060 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000060 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb0";
+		};
+
+		ahb1: clk@06000064 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000064 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb2: clk@06000068 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000068 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb2";
+		};
+
+		apb0: clk@06000070 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-apb0-clk";
+			reg = <0x06000070 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@06000074 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-apb1-clk";
+			reg = <0x06000074 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "apb1";
+		};
+
+		cci400_clk: clk@06000078 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-gt-clk";
+			reg = <0x06000078 0x4>;
+			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "cci400";
+		};
+
+		mmc0_clk: clk@06000410 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000410 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc0", "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@06000414 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000414 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc1", "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@06000418 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000418 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc2", "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@0600041c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x0600041c 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc3", "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		ahb0_gates: clk@06000580 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
+			reg = <0x06000580 0x4>;
+			clocks = <&ahb0>;
+			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+					<14>, <15>, <16>, <18>, <20>, <21>,
+					<22>, <23>;
+			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
+					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
+					"ahb0_nand0", "ahb0_sdram",
+					"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
+					"ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+					"ahb0_spi3";
+		};
+
+		ahb1_gates: clk@06000584 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
+			reg = <0x06000584 0x4>;
+			clocks = <&ahb1>;
+			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
+			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
+					"ahb1_gmac", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_hstimer",
+					"ahb1_dma";
+		};
+
+		ahb2_gates: clk@06000588 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
+			reg = <0x06000588 0x4>;
+			clocks = <&ahb2>;
+			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+					<11>;
+			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
+					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
+					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
+		};
+
+		apb0_gates: clk@06000590 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
+			reg = <0x06000590 0x4>;
+			clocks = <&apb0>;
+			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+					<17>, <18>, <19>;
+			clock-output-names = "apb0_spdif", "apb0_pio",
+					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
+					"apb0_lradc", "apb0_gpadc", "apb0_twd",
+					"apb0_cirtx";
+		};
+
+		apb1_gates: clk@06000594 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
+			reg = <0x06000594 0x4>;
+			clocks = <&apb1>;
+			clock-indices = <0>, <1>, <2>, <3>, <4>,
+					<16>, <17>, <18>, <19>, <20>, <21>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
+					"apb1_uart0", "apb1_uart1",
+					"apb1_uart2", "apb1_uart3",
+					"apb1_uart4", "apb1_uart5";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		ehci0: usb@00a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@00a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@00a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 3>;
+			resets = <&usb_mod_clk 18>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@00a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@00a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+				 <&mmc0_clk 1>, <&mmc0_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+				 <&mmc1_clk 1>, <&mmc1_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+				 <&mmc2_clk 1>, <&mmc2_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+				 <&mmc3_clk 1>, <&mmc3_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@01c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ahb0_gates 8>;
+			clock-names = "ahb";
+			resets = <&ahb0_resets 8>;
+			reset-names = "ahb";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@01c41000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x1000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		ahb0_resets: reset@060005a0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a0 0x4>;
+		};
+
+		ahb1_resets: reset@060005a4 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a4 0x4>;
+		};
+
+		ahb2_resets: reset@060005a8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a8 0x4>;
+		};
+
+		apb0_resets: reset@060005b0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005b0 0x4>;
+		};
+
+		apb1_resets: reset@060005b4 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005b4 0x4>;
+		};
+
+		timer@06000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@06000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "i2c3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG12", "PG13", "PG14", "PG15";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@07000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			resets = <&apb1_resets 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@07000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			resets = <&apb1_resets 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@07000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			resets = <&apb1_resets 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@07000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			resets = <&apb1_resets 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@07001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			resets = <&apb1_resets 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@07001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			resets = <&apb1_resets 21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@07002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 0>;
+			resets = <&apb1_resets 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@07002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 1>;
+			resets = <&apb1_resets 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@07003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 2>;
+			resets = <&apb1_resets 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@07003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 3>;
+			resets = <&apb1_resets 3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@07003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 4>;
+			resets = <&apb1_resets 4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@08001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_uart: serial@08002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi
index 3d021ef..e02baa6 100644
--- a/arch/arm/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/dts/sunxi-common-regulators.dtsi
@@ -3,40 +3,84 @@
  *
  * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/ {
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PB8";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH6";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
+&pio {
+	ahci_pwr_pin_a: ahci_pwr_pin@0 {
+		allwinner,pins = "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+/ {
 	reg_ahci_5v: ahci-5v {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -44,8 +88,21 @@
 		regulator-name = "ahci-5v";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		enable-active-high;
-		gpio = <&pio 1 8 0>;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_pin_a>;
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -57,7 +114,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		gpio = <&pio 7 6 0>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -69,7 +126,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		gpio = <&pio 7 3 0>;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -86,4 +143,11 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 };
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 8a80385..04c6d58 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -31,7 +31,7 @@ struct sunxi_ccm_reg {
 	u32 mipi_pll_cfg;	/* 0x40 MIPI pll control */
 	u32 pll9_cfg;		/* 0x44 pll9 control */
 	u32 pll10_cfg;		/* 0x48 pll10 control */
-	u32 reserved8;
+	u32 pll11_cfg;		/* 0x4c pll11 (ddr1) control (A33 only) */
 	u32 cpu_axi_cfg;	/* 0x50 CPU/AXI divide ratio */
 	u32 ahb1_apb1_div;	/* 0x54 AHB1/APB1 divide ratio */
 	u32 apb2_div;		/* 0x58 APB2 divide ratio */
@@ -63,7 +63,8 @@ struct sunxi_ccm_reg {
 	u32 reserved12[7];
 	u32 mdfs_clk_cfg;	/* 0xf0 MDFS clock control */
 	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
-	u32 reserved13[2];
+	u32 dram_pll_cfg;	/* 0xf8 PLL_DDR cfg register, A33 only */
+	u32 mbus_reset;		/* 0xfc MBUS reset control, A33 only */
 	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
 	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
 	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
@@ -126,7 +127,9 @@ struct sunxi_ccm_reg {
 	u32 mipi_pattern_cfg;	/* 0x2a0 MIPI Pattern config */
 	u32 pll9_pattern_cfg;	/* 0x2a4 PLL9 Pattern config */
 	u32 pll10_pattern_cfg;	/* 0x2a8 PLL10 Pattern config */
-	u32 reserved22[5];
+	u32 pll11_pattern_cfg0; /* 0x2ac PLL11 Pattern config0, A33 only */
+	u32 pll11_pattern_cfg1; /* 0x2b0 PLL11 Pattern config0, A33 only */
+	u32 reserved22[3];
 	u32 ahb_reset0_cfg;	/* 0x2c0 AHB1 Reset 0 config */
 	u32 ahb_reset1_cfg;	/* 0x2c4 AHB1 Reset 1 config */
 	u32 ahb_reset2_cfg;	/* 0x2c8 AHB1 Reset 2 config */
@@ -195,6 +198,11 @@ struct sunxi_ccm_reg {
 #define CCM_PLL6_CTRL_K_SHIFT		4
 #define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
 
+#define CCM_PLL11_CTRL_N(n)		((((n) - 1) & 0x3f) << 8)
+#define CCM_PLL11_CTRL_SIGMA_DELTA_EN	(0x1 << 24)
+#define CCM_PLL11_CTRL_UPD		(0x1 << 30)
+#define CCM_PLL11_CTRL_EN		(0x1 << 31)
+
 #define AHB1_ABP1_DIV_DEFAULT		0x00002020
 
 #define AXI_GATE_OFFSET_DRAM		0
@@ -216,6 +224,7 @@ struct sunxi_ccm_reg {
 
 /* ahb_gate1 offsets */
 #define AHB_GATE_OFFSET_DRC0		25
+#define AHB_GATE_OFFSET_DE_FE0		14
 #define AHB_GATE_OFFSET_DE_BE0		12
 #define AHB_GATE_OFFSET_HDMI		11
 #define AHB_GATE_OFFSET_LCD1		5
@@ -248,12 +257,23 @@ struct sunxi_ccm_reg {
 
 #define MDFS_CLK_DEFAULT		0x81000002 /* PLL6 / 3 */
 
+#define CCM_DRAMCLK_CFG_DIV(x)		((x - 1) << 0)
+#define CCM_DRAMCLK_CFG_DIV_MASK	(0xf << 0)
 #define CCM_DRAMCLK_CFG_DIV0(x)		((x - 1) << 8)
 #define CCM_DRAMCLK_CFG_DIV0_MASK	(0xf << 8)
 #define CCM_DRAMCLK_CFG_UPD		(0x1 << 16)
 #define CCM_DRAMCLK_CFG_RST		(0x1 << 31)
 
+#define CCM_DRAMPLL_CFG_SRC_PLL5	(0x0 << 16) /* Select PLL5 (DDR0) */
+#define CCM_DRAMPLL_CFG_SRC_PLL11	(0x1 << 16) /* Select PLL11 (DDR1) */
+#define CCM_DRAMPLL_CFG_SRC_MASK	(0x1 << 16)
+
+#define CCM_MBUS_RESET_RESET		(0x1 << 31)
+
+#define CCM_DRAM_GATE_OFFSET_DE_FE0	24
+#define CCM_DRAM_GATE_OFFSET_DE_FE1	25
 #define CCM_DRAM_GATE_OFFSET_DE_BE0	26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1	27
 
 #define CCM_LCD_CH0_CTRL_PLL3		(0 << 24)
 #define CCM_LCD_CH0_CTRL_PLL7		(1 << 24)
@@ -285,8 +305,10 @@ struct sunxi_ccm_reg {
 #else
 #define MBUS_CLK_DEFAULT		0x81000003 /* PLL6 / 4 */
 #endif
+#define MBUS_CLK_GATE			(0x1 << 31)
 
 #define CCM_PLL5_PATTERN		0xd1303333
+#define CCM_PLL11_PATTERN		0xf5860000
 
 /* ahb_reset0 offsets */
 #define AHB_RESET_OFFSET_GMAC		17
@@ -299,7 +321,9 @@ struct sunxi_ccm_reg {
 #define AHB_RESET_OFFSET_SS		5
 
 /* ahb_reset1 offsets */
+#define AHB_RESET_OFFSET_SAT		26
 #define AHB_RESET_OFFSET_DRC0		25
+#define AHB_RESET_OFFSET_DE_FE0		14
 #define AHB_RESET_OFFSET_DE_BE0		12
 #define AHB_RESET_OFFSET_HDMI		11
 #define AHB_RESET_OFFSET_LCD1		5
@@ -326,6 +350,7 @@ struct sunxi_ccm_reg {
 void clock_set_pll1(unsigned int hz);
 void clock_set_pll3(unsigned int hz);
 void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
 unsigned int clock_get_pll6(void);
 #endif
 
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index f403742..63b161a 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -37,7 +37,7 @@
 #define SUNXI_MMC1_BASE			0x01c10000
 #define SUNXI_MMC2_BASE			0x01c11000
 #define SUNXI_MMC3_BASE			0x01c12000
-#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN4I
 #define SUNXI_USB0_BASE			0x01c13000
 #define SUNXI_USB1_BASE			0x01c14000
 #endif
@@ -45,12 +45,13 @@
 #define SUNXI_HDMI_BASE			0x01c16000
 #define SUNXI_SPI2_BASE			0x01c17000
 #define SUNXI_SATA_BASE			0x01c18000
-#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN4I
 #define SUNXI_PATA_BASE			0x01c19000
 #define SUNXI_ACE_BASE			0x01c1a000
 #define SUNXI_TVE1_BASE			0x01c1b000
 #define SUNXI_USB2_BASE			0x01c1c000
-#else
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 #define SUNXI_USB0_BASE			0x01c19000
 #define SUNXI_USB1_BASE			0x01c1a000
 #define SUNXI_USB2_BASE			0x01c1b000
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index aedd194..273f80f 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -18,8 +18,10 @@
 /* dram regs definition */
 #if defined(CONFIG_MACH_SUN6I)
 #include <asm/arch/dram_sun6i.h>
-#elif defined(CONFIG_MACH_SUN8I)
-#include <asm/arch/dram_sun8i.h>
+#elif defined(CONFIG_MACH_SUN8I_A23)
+#include <asm/arch/dram_sun8i_a23.h>
+#elif defined(CONFIG_MACH_SUN8I_A33)
+#include <asm/arch/dram_sun8i_a33.h>
 #else
 #include <asm/arch/dram_sun4i.h>
 #endif
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a23.h
index 06adee2..06adee2 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun8i.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a23.h
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h
new file mode 100644
index 0000000..afe6dc8
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a33.h
@@ -0,0 +1,179 @@
+/*
+ * Sun8i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ *                         Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015      Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN8I_A33_H
+#define _SUNXI_DRAM_SUN8I_A33_H
+
+struct sunxi_mctl_com_reg {
+	u32 cr;			/* 0x00 */
+	u32 ccr;		/* 0x04 controller configuration register */
+	u32 dbgcr;		/* 0x08 */
+	u8 res0[0x4];		/* 0x0c */
+	u32 mcr0_0;		/* 0x10 */
+	u32 mcr1_0;		/* 0x14 */
+	u32 mcr0_1;		/* 0x18 */
+	u32 mcr1_1;		/* 0x1c */
+	u32 mcr0_2;		/* 0x20 */
+	u32 mcr1_2;		/* 0x24 */
+	u32 mcr0_3;		/* 0x28 */
+	u32 mcr1_3;		/* 0x2c */
+	u32 mcr0_4;		/* 0x30 */
+	u32 mcr1_4;		/* 0x34 */
+	u32 mcr0_5;		/* 0x38 */
+	u32 mcr1_5;		/* 0x3c */
+	u32 mcr0_6;		/* 0x40 */
+	u32 mcr1_6;		/* 0x44 */
+	u32 mcr0_7;		/* 0x48 */
+	u32 mcr1_7;		/* 0x4c */
+	u32 mcr0_8;		/* 0x50 */
+	u32 mcr1_8;		/* 0x54 */
+	u32 mcr0_9;		/* 0x58 */
+	u32 mcr1_9;		/* 0x5c */
+	u32 mcr0_10;		/* 0x60 */
+	u32 mcr1_10;		/* 0x64 */
+	u32 mcr0_11;		/* 0x68 */
+	u32 mcr1_11;		/* 0x6c */
+	u32 mcr0_12;		/* 0x70 */
+	u32 mcr1_12;		/* 0x74 */
+	u32 mcr0_13;		/* 0x78 */
+	u32 mcr1_13;		/* 0x7c */
+	u32 mcr0_14;		/* 0x80 */
+	u32 mcr1_14;		/* 0x84 */
+	u32 mcr0_15;		/* 0x88 */
+	u32 mcr1_15;		/* 0x8c */
+	u32 bwcr;		/* 0x90 */
+	u32 maer;		/* 0x94 */
+	u32 mapr;		/* 0x98 */
+	u32 mcgcr;		/* 0x9c */
+	u32 bwctr;		/* 0xa0 */
+	u8 res2[0x8];		/* 0xa4 */
+	u32 swoffr;		/* 0xac */
+	u8 res3[0x10];		/* 0xb0 */
+	u32 swonr;		/* 0xc0 */
+	u8 res4[0x3c];		/* 0xc4 */
+	u32 mdfscr;		/* 0x100 */
+	u32 mdfsmer;		/* 0x104 */
+};
+
+struct sunxi_mctl_ctl_reg {
+	u32 pir;		/* 0x00 */
+	u32 pwrctl;		/* 0x04 */
+	u32 mrctrl0;		/* 0x08 */
+	u32 clken;		/* 0x0c */
+	u32 pgsr0;		/* 0x10 */
+	u32 pgsr1;		/* 0x14 */
+	u32 statr;		/* 0x18 */
+	u8 res1[0x14];		/* 0x1c */
+	u32 mr0;		/* 0x30 */
+	u32 mr1;		/* 0x34 */
+	u32 mr2;		/* 0x38 */
+	u32 mr3;		/* 0x3c */
+	u32 pllgcr;		/* 0x40 */
+	u32 ptr0;		/* 0x44 */
+	u32 ptr1;		/* 0x48 */
+	u32 ptr2;		/* 0x4c */
+	u32 ptr3;		/* 0x50 */
+	u32 ptr4;		/* 0x54 */
+	u32 dramtmg0;		/* 0x58 dram timing parameters register 0 */
+	u32 dramtmg1;		/* 0x5c dram timing parameters register 1 */
+	u32 dramtmg2;		/* 0x60 dram timing parameters register 2 */
+	u32 dramtmg3;		/* 0x64 dram timing parameters register 3 */
+	u32 dramtmg4;		/* 0x68 dram timing parameters register 4 */
+	u32 dramtmg5;		/* 0x6c dram timing parameters register 5 */
+	u32 dramtmg6;		/* 0x70 dram timing parameters register 6 */
+	u32 dramtmg7;		/* 0x74 dram timing parameters register 7 */
+	u32 dramtmg8;		/* 0x78 dram timing parameters register 8 */
+	u32 odtcfg;		/* 0x7c */
+	u32 pitmg0;		/* 0x80 */
+	u32 pitmg1;		/* 0x84 */
+	u8 res2[0x4];		/* 0x88 */
+	u32 rfshctl0;		/* 0x8c */
+	u32 rfshtmg;		/* 0x90 */
+	u32 rfshctl1;		/* 0x94 */
+	u32 pwrtmg;		/* 0x98 */
+	u8  res3[0x20];		/* 0x9c */
+	u32 dqsgmr;		/* 0xbc */
+	u32 dtcr;		/* 0xc0 */
+	u32 dtar0;		/* 0xc4 */
+	u32 dtar1;		/* 0xc8 */
+	u32 dtar2;		/* 0xcc */
+	u32 dtar3;		/* 0xd0 */
+	u32 dtdr0;		/* 0xd4 */
+	u32 dtdr1;		/* 0xd8 */
+	u32 dtmr0;		/* 0xdc */
+	u32 dtmr1;		/* 0xe0 */
+	u32 dtbmr;		/* 0xe4 */
+	u32 catr0;		/* 0xe8 */
+	u32 catr1;		/* 0xec */
+	u32 dtedr0;		/* 0xf0 */
+	u32 dtedr1;		/* 0xf4 */
+	u8 res4[0x8];		/* 0xf8 */
+	u32 pgcr0;		/* 0x100 */
+	u32 pgcr1;		/* 0x104 */
+	u32 pgcr2;		/* 0x108 */
+	u8 res5[0x4];		/* 0x10c */
+	u32 iovcr0;		/* 0x110 */
+	u32 iovcr1;		/* 0x114 */
+	u32 dqsdr;		/* 0x118 */
+	u32 dxccr;		/* 0x11c */
+	u32 odtmap;		/* 0x120 */
+	u32 zqctl0;		/* 0x124 */
+	u32 zqctl1;		/* 0x128 */
+	u8 res6[0x14];		/* 0x12c */
+	u32 zqcr0;		/* 0x140 zq control register 0 */
+	u32 zqcr1;		/* 0x144 zq control register 1 */
+	u32 zqcr2;		/* 0x148 zq control register 2 */
+	u32 zqsr0;		/* 0x14c zq status register 0 */
+	u32 zqsr1;		/* 0x150 zq status register 1 */
+	u8 res7[0x6c];		/* 0x154 */
+	u32 sched;		/* 0x1c0 */
+	u32 perfhpr0;		/* 0x1c4 */
+	u32 perfhpr1;		/* 0x1c8 */
+	u32 perflpr0;		/* 0x1cc */
+	u32 perflpr1;		/* 0x1d0 */
+	u32 perfwr0;		/* 0x1d4 */
+	u32 perfwr1;		/* 0x1d8 */
+};
+
+#define DXnGTR(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000340 + 0x80 * x)
+#define DXnGCR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000344 + 0x80 * x)
+#define DXnGSR0(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000348 + 0x80 * x)
+#define DXnGSR1(x)	(SUNXI_DRAM_CTL0_BASE + 0x0000034c + 0x80 * x)
+#define DXnGSR2(x)	(SUNXI_DRAM_CTL0_BASE + 0x00000350 + 0x80 * x)
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK		(3 << 0)
+#define MCTL_CR_RANK(x)			(((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK		(3 << 2)
+#define MCTL_CR_BANK(x)			((x) << 2)
+#define MCTL_CR_ROW_MASK		(0xf << 4)
+#define MCTL_CR_ROW(x)			(((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK		(0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x)		((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK		(7 << 12)
+#define MCTL_CR_BUSW8			(0 << 12)
+#define MCTL_CR_BUSW16			(1 << 12)
+#define MCTL_CR_SEQUENCE		(1 << 15)
+#define MCTL_CR_DDR3			(3 << 16)
+#define MCTL_CR_CHANNEL_MASK		(1 << 19)
+#define MCTL_CR_CHANNEL(x)		(((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN			(0x4 << 20)
+#define MCTL_CR_CS1_CONTROL(x)		((x) << 24)
+
+/* DRAM control (sunxi_mctl_ctl_reg) register constants */
+#define MCTL_MR0			0x1c70 /* CL=11, WR=12 */
+#define MCTL_MR1			0x40
+#define MCTL_MR2			0x18 /* CWL=8 */
+#define MCTL_MR3			0x0
+
+#endif /* _SUNXI_DRAM_SUN8I_A33_H */
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index ae7cbb7..59d8210 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -203,8 +203,10 @@ enum sunxi_gpio_number {
 #define SUNXI_GPIO_PULL_DOWN	2
 
 /* Virtual AXP0 GPIOs */
-#define SUNXI_GPIO_AXP0_VBUS_DETECT	8
-#define SUNXI_GPIO_AXP0_VBUS_ENABLE	9
+#define SUNXI_GPIO_AXP0_PREFIX "AXP0-"
+#define SUNXI_GPIO_AXP0_VBUS_DETECT	4
+#define SUNXI_GPIO_AXP0_VBUS_ENABLE	5
+#define SUNXI_GPIO_AXP0_GPIO_COUNT	6
 
 void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val);
 void sunxi_gpio_set_cfgpin(u32 pin, u32 val);
@@ -216,4 +218,10 @@ int sunxi_name_to_gpio_bank(const char *name);
 int sunxi_name_to_gpio(const char *name);
 #define name_to_gpio(name) sunxi_name_to_gpio(name)
 
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
+int axp_gpio_init(void);
+#else
+static inline int axp_gpio_init(void) { return 0; }
+#endif
+
 #endif /* _SUNXI_GPIO_H */
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index 74833b5..cb52e64 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -43,8 +43,7 @@ struct sunxi_mmc {
 	u32 chda;		/* 0x90 */
 	u32 cbda;		/* 0x94 */
 	u32 res1[26];
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
-    defined(CONFIG_MACH_SUN9I)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	u32 res2[64];
 #endif
 	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
diff --git a/arch/arm/include/asm/arch-sunxi/pmic_bus.h b/arch/arm/include/asm/arch-sunxi/pmic_bus.h
new file mode 100644
index 0000000..9c4372a
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/pmic_bus.h
@@ -0,0 +1,18 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers header
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_PMIC_BUS_H
+#define _SUNXI_PMIS_BUS_H
+
+int pmic_bus_init(void);
+int pmic_bus_read(u8 reg, u8 *data);
+int pmic_bus_write(u8 reg, u8 data);
+int pmic_bus_setbits(u8 reg, u8 bits);
+int pmic_bus_clrbits(u8 reg, u8 bits);
+
+#endif
diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
index 60a5bd8..9df3744 100644
--- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
@@ -23,4 +23,7 @@ void sdelay(unsigned long);
  */
 void return_to_fel(uint32_t lr, uint32_t sp);
 
+/* Board / SoC level designware gmac init */
+int sunxi_gmac_initialize(bd_t *bis);
+
 #endif
diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
index 9a5e488..a665309 100644
--- a/arch/arm/include/asm/arch-sunxi/timer.h
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -67,7 +67,7 @@ struct sunxi_timer_reg {
 	struct sunxi_timer timer[6];	/* We have 6 timers */
 	u8 res2[16];
 	struct sunxi_avs avs;
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#ifdef CONFIG_SUNXI_GEN_SUN4I
 	struct sunxi_wdog wdog;	/* 0x90 */
 	/* XXX the following is not accurate for sun5i/sun7i */
 	struct sunxi_64cnt cnt64;	/* 0xa0 */
@@ -77,7 +77,8 @@ struct sunxi_timer_reg {
 	struct sunxi_tgp tgp[4];
 	u8 res5[8];
 	u32 cpu_cfg;
-#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || ... */
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	u8 res3[16];
 	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
 #endif
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
new file mode 100644
index 0000000..b7b831e
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -0,0 +1,20 @@
+/*
+ * Sunxi usb-phy code
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+int sunxi_usb_phy_probe(void);
+int sunxi_usb_phy_remove(void);
+void sunxi_usb_phy_init(int index);
+void sunxi_usb_phy_exit(int index);
+void sunxi_usb_phy_power_on(int index);
+void sunxi_usb_phy_power_off(int index);
+int sunxi_usb_phy_vbus_detect(int index);
+void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h
deleted file mode 100644
index ab0f272..0000000
--- a/arch/arm/include/asm/arch-sunxi/usbc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Sunxi usb-controller code shared between the ehci and musb controllers
- *
- * Copyright (C) 2014 Roman Byshko
- *
- * Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern const struct musb_platform_ops sunxi_musb_ops;
-
-void *sunxi_usbc_get_io_base(int index);
-int sunxi_usbc_request_resources(int index);
-int sunxi_usbc_free_resources(int index);
-void sunxi_usbc_enable(int index);
-void sunxi_usbc_disable(int index);
-void sunxi_usbc_vbus_enable(int index);
-void sunxi_usbc_vbus_disable(int index);
-int sunxi_usbc_vbus_detect(int index);
-void sunxi_usbc_enable_squelch_detect(int index, int enable);
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 88e3358..a60d028 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -1,21 +1,40 @@
 if ARCH_SUNXI
 
+# Note only one of these may be selected at a time! But hidden choices are
+# not supported by Kconfig
+config SUNXI_GEN_SUN4I
+	bool
+	---help---
+	Select this for sunxi SoCs which have resets and clocks set up
+	as the original A10 (mach-sun4i).
+
+config SUNXI_GEN_SUN6I
+	bool
+	---help---
+	Select this for sunxi SoCs which have sun6i like periphery, like
+	separate ahb reset control registers, custom pmic bus, new style
+	watchdog, etc.
+
+
 choice
 	prompt "Sunxi SoC Variant"
 
 config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
 	select CPU_V7
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
 config MACH_SUN5I
 	bool "sun5i (Allwinner A13)"
 	select CPU_V7
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
 config MACH_SUN6I
 	bool "sun6i (Allwinner A31)"
 	select CPU_V7
+	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 
 config MACH_SUN7I
@@ -23,16 +42,30 @@ config MACH_SUN7I
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
-config MACH_SUN8I
+config MACH_SUN8I_A23
 	bool "sun8i (Allwinner A23)"
 	select CPU_V7
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
+config MACH_SUN8I_A33
+	bool "sun8i (Allwinner A33)"
+	select CPU_V7
+	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 
 endchoice
 
+# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
+config MACH_SUN8I
+	bool
+	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+
+
 config DRAM_CLK
 	int "sunxi dram clock speed"
 	default 312 if MACH_SUN6I || MACH_SUN8I
@@ -176,9 +209,6 @@ config UART0_PORT_F
 	at the same time, the system can be only booted in the FEL mode.
 	Only enable this if you really know what you are doing.
 
-config FDTFILE
-	string "Default fdtfile env setting for this board"
-
 config OLD_SUNXI_KERNEL_COMPAT
 	boolean "Enable workarounds for booting old kernels"
 	default n
@@ -307,6 +337,12 @@ config I2C4_ENABLE
 	See I2C0_ENABLE help text.
 endif
 
+config AXP_GPIO
+	boolean "Enable support for gpio-s on axp PMICs"
+	default n
+	---help---
+	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
+
 config VIDEO
 	boolean "Enable graphical uboot console on HDMI, LCD or VGA"
 	default y
@@ -507,4 +543,16 @@ config GMAC_TX_DELAY
 	---help---
 	Set the GMAC Transmit Clock Delay Chain value.
 
+config NET
+	default y
+
+config NETDEVICES
+	default y
+
+config DM_ETH
+	default y
+
+config DM_SERIAL
+	default y
+
 endif
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 75e8b5a..339904b 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -38,6 +38,7 @@ F:	configs/qt840a_defconfig
 F:	configs/Wits_Pro_A20_DKT_defconfig
 F:	include/configs/sun8i.h
 F:	configs/Ippo_q8h_v1_2_defconfig
+F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>
@@ -59,6 +60,11 @@ M:	Paul Kocialkowski <contact@paulk.fr>
 S:	Maintained
 F:	configs/Ampe_A76_defconfig
 
+Astar MID756 BOARD
+M:	VishnuPatekar <vishnupatekar0510@gmail.com>
+S:	Maintained
+F:	configs/Astar_MID756_defconfig
+
 COLOMBUS BOARD
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index dda50b5..d9f7691 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -28,7 +28,8 @@
 #include <asm/arch/dram.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
 #include <asm/io.h>
 #include <linux/usb/musb.h>
 #include <net.h>
@@ -37,6 +38,41 @@
 /* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
 int soft_i2c_gpio_sda;
 int soft_i2c_gpio_scl;
+
+static int soft_i2c_board_init(void)
+{
+	int ret;
+
+	soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+	if (soft_i2c_gpio_sda < 0) {
+		printf("Error invalid soft i2c sda pin: '%s', err %d\n",
+		       CONFIG_VIDEO_LCD_PANEL_I2C_SDA, soft_i2c_gpio_sda);
+		return soft_i2c_gpio_sda;
+	}
+	ret = gpio_request(soft_i2c_gpio_sda, "soft-i2c-sda");
+	if (ret) {
+		printf("Error requesting soft i2c sda pin: '%s', err %d\n",
+		       CONFIG_VIDEO_LCD_PANEL_I2C_SDA, ret);
+		return ret;
+	}
+
+	soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+	if (soft_i2c_gpio_scl < 0) {
+		printf("Error invalid soft i2c scl pin: '%s', err %d\n",
+		       CONFIG_VIDEO_LCD_PANEL_I2C_SCL, soft_i2c_gpio_scl);
+		return soft_i2c_gpio_scl;
+	}
+	ret = gpio_request(soft_i2c_gpio_scl, "soft-i2c-scl");
+	if (ret) {
+		printf("Error requesting soft i2c scl pin: '%s', err %d\n",
+		       CONFIG_VIDEO_LCD_PANEL_I2C_SCL, ret);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int soft_i2c_board_init(void) { return 0; }
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -44,7 +80,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* add board specific code here */
 int board_init(void)
 {
-	int id_pfr1;
+	int id_pfr1, ret;
 
 	gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
 
@@ -57,7 +93,12 @@ int board_init(void)
 		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
 	}
 
-	return 0;
+	ret = axp_gpio_init();
+	if (ret)
+		return ret;
+
+	/* Uses dm gpio code so do this here and not in i2c_init_board() */
+	return soft_i2c_board_init();
 }
 
 int dram_init(void)
@@ -351,11 +392,6 @@ void i2c_init_board(void)
 	clock_twi_onoff(4, 1);
 #endif
 #endif
-
-#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
-	soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
-	soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
-#endif
 }
 
 #ifdef CONFIG_SPL_BUILD
@@ -416,6 +452,8 @@ void sunxi_board_init(void)
 #endif
 
 #if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+extern const struct musb_platform_ops sunxi_musb_ops;
+
 static struct musb_hdrc_config musb_config = {
 	.multipoint     = 1,
 	.dyn_fifo       = 1,
@@ -472,6 +510,10 @@ int misc_init_r(void)
 		}
 	}
 
+	ret = sunxi_usb_phy_probe();
+	if (ret)
+		return ret;
+
 #if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
 	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
 #endif
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index d90eed4..4e222d8 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -13,11 +13,11 @@ int sunxi_gmac_initialize(bd_t *bis)
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
 	/* Set up clock gating */
-#ifndef CONFIG_MACH_SUN6I
-	setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
-#else
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_RESET_OFFSET_GMAC);
 	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_GMAC);
+#else
+	setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
 #endif
 
 	/* Set MII clock */
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 3e19424..0713652 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index 73b7894..e738923 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_MMC0_CD_PIN="PG1"
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index ab890c6..f558a6c 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index b923d3e..7b7b116 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
@@ -10,6 +10,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_AXP_GPIO=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index f7231c6..59e7473 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB0_VBUS_PIN="PC17"
 CONFIG_USB0_VBUS_DET="PH5"
@@ -11,5 +11,3 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 7868d6e..2ba70f7 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
@@ -8,5 +8,3 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 11fb760..7d2e810 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_VIDEO_VGA=y
 CONFIG_MMC0_CD_PIN="PH1"
@@ -12,5 +12,3 @@ CONFIG_DRAM_CLK=384
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index e5c2e21..ff41444 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -5,11 +5,12 @@
 # Also see: http://linux-sunxi.org/Ainol_AW1
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun7i-a20-ainol-aw1.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo:141,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index af7638d..375cc68 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-CONFIG_FDTFILE="sun5i-a13-ampe-a76.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
 CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PG12"
@@ -9,6 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_AXP_GPIO=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
diff --git a/configs/Astar_MID756_defconfig b/configs/Astar_MID756_defconfig
new file mode 100644
index 0000000..0072ab8
--- /dev/null
+++ b/configs/Astar_MID756_defconfig
@@ -0,0 +1,26 @@
+# The Astar MID756 is a 7" tablet using the A33 SoC with a 800x480 LCD screen,
+# 512M RAM, 8G ROM and integrated sdio wifi.
+#
+# Also see: http://linux-sunxi.org/Softwinner_astar-rda
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-astar-mid756"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=480
+# zq = 0x3bbb
+CONFIG_DRAM_ZQ=15291
+# Wifi power
+CONFIG_AXP221_DLDO1_VOLT=3300
+# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
+CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index ee6d6f6..f3f42e4 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
 CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 36a8671..8dcf4a7 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-bananapi.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
@@ -9,5 +9,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 236a992..d3e015c 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 CONFIG_USB1_VBUS_PIN="PH0"
 CONFIG_USB2_VBUS_PIN="PH1"
 CONFIG_GMAC_TX_DELAY=3
@@ -11,5 +11,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index 776636e..817cd6d 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31s-cs908.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -14,5 +14,3 @@ CONFIG_AXP221_ALDO1_VOLT=3300
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 03f9361..9053075 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun4i-a10-chuwi-v7-cw0825.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB0_VBUS_DET="PH5"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 810c88f..c7efabc 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -11,5 +11,3 @@ CONFIG_AXP221_ALDO1_VOLT=3300
 # No Vbus gpio for usb1
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 7f65c1d..092d6b0 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
@@ -9,5 +9,3 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index 0b5c536..09b67ff 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index b8418f7..50d6d66 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_VIDEO_VGA=y
 CONFIG_ARM=y
@@ -10,5 +10,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index 8a11e09..9e049b2 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
-CONFIG_FDTFILE="sun6i-a31-hummingbird.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 CONFIG_ARM=y
@@ -15,5 +15,3 @@ CONFIG_USB1_VBUS_PIN="PH24"
 # No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index b2bba11..3b71719 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -3,7 +3,7 @@
 # headphones port for details see: http://linux-sunxi.org/Hyundai_A7HD
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun4i-a10-hyundai-a7hd.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB09"
 CONFIG_USB0_VBUS_DET="PH5"
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
new file mode 100644
index 0000000..f54e2ee
--- /dev/null
+++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
@@ -0,0 +1,24 @@
+# This is a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb,
+# with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=480
+# zq = 0x3bbb
+CONFIG_DRAM_ZQ=15291
+# Wifi power
+CONFIG_AXP221_DLDO1_VOLT=3300
+# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
+CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
index e003b4c..a6d58e7 100644
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ b/configs/Ippo_q8h_v1_2_defconfig
@@ -1,9 +1,10 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v1.2.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PH7"
@@ -11,7 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I=y
+CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=432
 # zq = 0xf74a
 CONFIG_DRAM_ZQ=63306
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index 87d898e..7f6e4ce 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -1,9 +1,10 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v5.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PH7"
@@ -11,7 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I=y
+CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=480
 # zq = 0xf777
 CONFIG_DRAM_ZQ=63351
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 9d171bd..60d2357 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_USB1_VBUS_PIN="PH11"
 CONFIG_ARM=y
@@ -10,5 +10,3 @@ CONFIG_DRAM_CLK=408
 CONFIG_DRAM_ZQ=122
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index e5aabdb..83e539d 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -1,20 +1,10 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=122
 CONFIG_DRAM_EMR1=4
-CONFIG_DM=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_DISABLE_OF_CONTROL=y
-CONFIG_OF_SEPARATE=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
-CONFIG_DM_ETH=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index 3bed6aa..93366d3 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index d50d785..fcacfc6 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -4,7 +4,7 @@
 # 1 USB A, 1 USB mini OTG, Bluetooth and Wireless LAN.
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-mk808c.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 5227b6f..c767b3d 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -8,7 +8,7 @@
 #    http://linux-sunxi.org/MSI_Primo73
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun7i-a20-primo73.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:60000,le:60,ri:160,up:13,lo:12,hs:100,vs:10,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PH8"
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index b6aa876..7e41e4b 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -9,7 +9,7 @@
 
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS=""
-CONFIG_FDTFILE="sun6i-a31s-primo81.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
 CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index 74ce12c..e47709f 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-marsboard.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index c30e18b..32b20a7 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-a1000.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
 CONFIG_VIDEO_VGA=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index e91d507..adcf3b2 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -6,7 +6,7 @@
 # For more details see: http://linux-sunxi.org/Mele_I7
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31-i7.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -25,5 +25,3 @@ CONFIG_USB1_VBUS_PIN="PC27"
 # No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index a74dd2d..e2f8d65 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-m3.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
 CONFIG_VIDEO_VGA=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_MMC0_CD_PIN="PH1"
@@ -11,5 +11,3 @@ CONFIG_DRAM_CLK=384
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index d0f0425..78fba71 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
-CONFIG_FDTFILE="sun7i-a20-m5.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
 CONFIG_VIDEO_HDMI=y
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB1_VBUS_PIN="PH6"
@@ -12,5 +12,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=122
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index 592322d..ea35024 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31-m9.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -19,5 +19,3 @@ CONFIG_USB1_VBUS_PIN="PC27"
 # No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index a4cd5c7..434c561 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index 5bf9cac..cd25521 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -7,7 +7,7 @@
 # http://www.orangepi.org/
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-orangepi.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_USB1_VBUS_PIN="PH26"
 CONFIG_USB2_VBUS_PIN="PH22"
@@ -19,5 +19,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index fce0555..0bef159 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -8,7 +8,7 @@
 # http://www.orangepi.org/
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-orangepi-mini.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_MMC0_CD_PIN="PH10"
 CONFIG_MMC3_CD_PIN="PH11"
@@ -22,5 +22,3 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 0953554..3484a2f 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-CONFIG_FDTFILE="sun5i-a13-tzx-q8-713b7.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7"
 CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PG12"
@@ -9,6 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_AXP_GPIO=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index 19ccd70..ee44b51 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun5i-a13-utoo-p66.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB04"
 CONFIG_USB0_VBUS_DET="PG01"
@@ -11,6 +11,7 @@ CONFIG_VIDEO_LCD_RESET="PG11"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_TL059WV5C0=y
+CONFIG_AXP_GPIO=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_ARM=y
@@ -19,3 +20,4 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=123
 CONFIG_DRAM_EMR1=0
+CONFIG_DM_SERIAL=n
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index 3f9318f..9c6dfd6 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-wexler-tab7200.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:210,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index 92c33b3..19b8f39 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-wits-pro-a20-dkt.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
 CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
@@ -14,5 +14,3 @@ CONFIG_DRAM_CLK=384
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index 00ede67..b675726 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -6,7 +6,7 @@
 # Also see: http://linux-sunxi.org/Yones_Toptech_BD1078
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun7i-a20-yones-toptech-bd1078.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_MMC1_CD_PIN="PH2"
@@ -14,6 +14,7 @@ CONFIG_MMC1_PINS="PH"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:63000,le:32,ri:287,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 503cd87..9909a94 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
 CONFIG_USB2_VBUS_PIN="PH12"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
index 8151eac..7722915 100644
--- a/configs/forfun_q88db_defconfig
+++ b/configs/forfun_q88db_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun5i-a13-forfun-q88db.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
@@ -8,6 +8,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_AXP_GPIO=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index b10f4d0..e579fde 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
-CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
@@ -8,5 +8,3 @@ CONFIG_DRAM_CLK=384
 CONFIG_DRAM_ZQ=127
 CONFIG_DRAM_EMR1=4
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index 4225b85..0ae11a7 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -2,7 +2,7 @@
 # Also see: http://linux-sunxi.org/INet_3F
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun4i-a10-inet-3f.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index 0a8e0f5..204f887 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -2,7 +2,7 @@
 # Also see: http://linux-sunxi.org/INet_3W
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun4i-a10-inet-3w.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
 CONFIG_MMC0_CD_PIN="PH20"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index e5c103f..0646f9f 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
-CONFIG_FDTFILE="sun5i-a13-inet-86vs.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
@@ -8,6 +8,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_AXP_GPIO=y
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN5I=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 8c98019..c0d87cc 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -11,7 +11,7 @@
 # For more details see: http://linux-sunxi.org/Jesurun_Q5
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
-CONFIG_FDTFILE="sun4i-a10-jesurun-q5.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index 8275df8..4162627 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -6,6 +6,7 @@
 # Also see http://focalcrest.com/en/pc.html#pro02
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
@@ -20,5 +21,3 @@ CONFIG_USB1_VBUS_PIN="PH24"
 # No Vbus gpio for usb2
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index 701b92b..8e070b9 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a10s-mk802.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 0fe6edb..92b9ae4 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-mk802.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802"
 CONFIG_USB2_VBUS_PIN="PH12"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index 073d519..447d128 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun4i-a10-mk802ii.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index 563fa1a..d7ed165 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
 CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index 1e13fea..c46b725 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -6,7 +6,7 @@
 # More details are available at: http://linux-sunxi.org/Gemei_G9
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun4i-gemei-g9.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
 CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:100000,le:799,ri:260,up:15,lo:16,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_VIDEO_LCD_POWER="PH8"
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fb40e09..ba9efe8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -7,6 +7,7 @@
 
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_DM_GPIO)		+= gpio-uclass.o
+obj-$(CONFIG_AXP_GPIO)		+= axp_gpio.o
 endif
 /* TODO(sjg@chromium.org): Only tegra supports driver model in SPL */
 ifdef CONFIG_TEGRA_GPIO
diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c
new file mode 100644
index 0000000..2e97cc3
--- /dev/null
+++ b/drivers/gpio/axp_gpio.c
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * X-Powers AXP Power Management ICs gpio driver
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pmic_bus.h>
+#include <asm/gpio.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+#include <errno.h>
+
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#elif defined CONFIG_AXP209_POWER
+#include <axp209.h>
+#elif defined CONFIG_AXP221_POWER
+#include <axp221.h>
+#else
+#error Unknown AXP model
+#endif
+
+static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
+
+static u8 axp_get_gpio_ctrl_reg(unsigned pin)
+{
+	switch (pin) {
+	case 0: return AXP_GPIO0_CTRL;
+	case 1: return AXP_GPIO1_CTRL;
+#ifdef AXP_GPIO2_CTRL
+	case 2: return AXP_GPIO2_CTRL;
+#endif
+#ifdef AXP_GPIO3_CTRL
+	case 3: return AXP_GPIO3_CTRL;
+#endif
+	}
+	return 0;
+}
+
+static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
+{
+	u8 reg;
+
+	switch (pin) {
+#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
+	case SUNXI_GPIO_AXP0_VBUS_DETECT:
+		return 0;
+#endif
+	default:
+		reg = axp_get_gpio_ctrl_reg(pin);
+		if (reg == 0)
+			return -EINVAL;
+
+		return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT);
+	}
+}
+
+static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
+				     int val)
+{
+	__maybe_unused int ret;
+	u8 reg;
+
+	switch (pin) {
+#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
+		ret = pmic_bus_clrbits(AXP221_MISC_CTRL,
+				       AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+		if (ret)
+			return ret;
+
+		return axp_gpio_set_value(dev, pin, val);
+#endif
+	default:
+		reg = axp_get_gpio_ctrl_reg(pin);
+		if (reg == 0)
+			return -EINVAL;
+
+		return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
+						 AXP_GPIO_CTRL_OUTPUT_LOW);
+	}
+}
+
+static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
+{
+	u8 reg, val, mask;
+	int ret;
+
+	switch (pin) {
+#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
+	case SUNXI_GPIO_AXP0_VBUS_DETECT:
+		ret = pmic_bus_read(AXP_POWER_STATUS, &val);
+		mask = AXP_POWER_STATUS_VBUS_PRESENT;
+		break;
+#endif
+#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
+		ret = pmic_bus_read(AXP221_VBUS_IPSOUT, &val);
+		mask = AXP221_VBUS_IPSOUT_DRIVEBUS;
+		break;
+#endif
+	default:
+		reg = axp_get_gpio_ctrl_reg(pin);
+		if (reg == 0)
+			return -EINVAL;
+
+		ret = pmic_bus_read(AXP_GPIO_STATE, &val);
+		mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
+	}
+	if (ret)
+		return ret;
+
+	return (val & mask) ? 1 : 0;
+}
+
+static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
+{
+	u8 reg;
+
+	switch (pin) {
+#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
+		if (val)
+			return pmic_bus_setbits(AXP221_VBUS_IPSOUT,
+						AXP221_VBUS_IPSOUT_DRIVEBUS);
+		else
+			return pmic_bus_clrbits(AXP221_VBUS_IPSOUT,
+						AXP221_VBUS_IPSOUT_DRIVEBUS);
+#endif
+	default:
+		reg = axp_get_gpio_ctrl_reg(pin);
+		if (reg == 0)
+			return -EINVAL;
+
+		return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
+						 AXP_GPIO_CTRL_OUTPUT_LOW);
+	}
+}
+
+static const struct dm_gpio_ops gpio_axp_ops = {
+	.direction_input	= axp_gpio_direction_input,
+	.direction_output	= axp_gpio_direction_output,
+	.get_value		= axp_gpio_get_value,
+	.set_value		= axp_gpio_set_value,
+};
+
+static int gpio_axp_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	/* Tell the uclass how many GPIOs we have */
+	uc_priv->bank_name = strdup(SUNXI_GPIO_AXP0_PREFIX);
+	uc_priv->gpio_count = SUNXI_GPIO_AXP0_GPIO_COUNT;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(gpio_axp) = {
+	.name	= "gpio_axp",
+	.id	= UCLASS_GPIO,
+	.ops	= &gpio_axp_ops,
+	.probe	= gpio_axp_probe,
+};
+
+int axp_gpio_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = pmic_bus_init();
+	if (ret)
+		return ret;
+
+	/* There is no devicetree support for the axp yet, so bind directly */
+	ret = device_bind_driver(dm_root(), "gpio_axp", "AXP-gpio", &dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index cf5c624..f988130 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -15,15 +15,10 @@
 #include <errno.h>
 #include <fdtdec.h>
 #include <malloc.h>
+#include <asm/arch/gpio.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <dm/device-internal.h>
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -79,10 +74,6 @@ int gpio_free(unsigned gpio)
 
 int gpio_direction_input(unsigned gpio)
 {
-#ifdef AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_direction_input(gpio - SUNXI_GPIO_AXP0_START);
-#endif
 	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT);
 
 	return 0;
@@ -90,11 +81,6 @@ int gpio_direction_input(unsigned gpio)
 
 int gpio_direction_output(unsigned gpio, int value)
 {
-#ifdef AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_direction_output(gpio - SUNXI_GPIO_AXP0_START,
-						 value);
-#endif
 	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
 
 	return sunxi_gpio_output(gpio, value);
@@ -102,36 +88,14 @@ int gpio_direction_output(unsigned gpio, int value)
 
 int gpio_get_value(unsigned gpio)
 {
-#ifdef AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_get_value(gpio - SUNXI_GPIO_AXP0_START);
-#endif
 	return sunxi_gpio_input(gpio);
 }
 
 int gpio_set_value(unsigned gpio, int value)
 {
-#ifdef AXP_GPIO
-	if (gpio >= SUNXI_GPIO_AXP0_START)
-		return axp_gpio_set_value(gpio - SUNXI_GPIO_AXP0_START, value);
-#endif
 	return sunxi_gpio_output(gpio, value);
 }
 
-int sunxi_name_to_gpio_bank(const char *name)
-{
-	int group = 0;
-
-	if (*name == 'P' || *name == 'p')
-		name++;
-	if (*name >= 'A') {
-		group = *name - (*name > 'a' ? 'a' : 'A');
-		return group;
-	}
-
-	return -1;
-}
-
 int sunxi_name_to_gpio(const char *name)
 {
 	int group = 0;
@@ -139,21 +103,6 @@ int sunxi_name_to_gpio(const char *name)
 	long pin;
 	char *eptr;
 
-#ifdef AXP_GPIO
-	if (strncasecmp(name, "AXP0-", 5) == 0) {
-		name += 5;
-		if (strcmp(name, "VBUS-DETECT") == 0)
-			return SUNXI_GPIO_AXP0_START +
-				SUNXI_GPIO_AXP0_VBUS_DETECT;
-		if (strcmp(name, "VBUS-ENABLE") == 0)
-			return SUNXI_GPIO_AXP0_START +
-				SUNXI_GPIO_AXP0_VBUS_ENABLE;
-		pin = simple_strtol(name, &eptr, 10);
-		if (!*name || *eptr)
-			return -1;
-		return SUNXI_GPIO_AXP0_START + pin;
-	}
-#endif
 	if (*name == 'P' || *name == 'p')
 		name++;
 	if (*name >= 'A') {
@@ -171,7 +120,44 @@ int sunxi_name_to_gpio(const char *name)
 }
 #endif
 
+int sunxi_name_to_gpio_bank(const char *name)
+{
+	int group = 0;
+
+	if (*name == 'P' || *name == 'p')
+		name++;
+	if (*name >= 'A') {
+		group = *name - (*name > 'a' ? 'a' : 'A');
+		return group;
+	}
+
+	return -1;
+}
+
 #ifdef CONFIG_DM_GPIO
+/* TODO(sjg@chromium.org): Remove this function and use device tree */
+int sunxi_name_to_gpio(const char *name)
+{
+	unsigned int gpio;
+	int ret;
+#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
+	char lookup[8];
+
+	if (strcasecmp(name, "AXP0-VBUS-DETECT") == 0) {
+		sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d",
+			SUNXI_GPIO_AXP0_VBUS_DETECT);
+		name = lookup;
+	} else if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) {
+		sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d",
+			SUNXI_GPIO_AXP0_VBUS_ENABLE);
+		name = lookup;
+	}
+#endif
+	ret = gpio_lookup_name(name, NULL, NULL, &gpio);
+
+	return ret ? ret : gpio;
+}
+
 static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
 	struct sunxi_gpio_platdata *plat = dev_get_platdata(dev);
@@ -249,10 +235,11 @@ static char *gpio_bank_name(int bank)
 {
 	char *name;
 
-	name = malloc(2);
+	name = malloc(3);
 	if (name) {
-		name[0] = 'A' + bank;
-		name[1] = '\0';
+		name[0] = 'P';
+		name[1] = 'A' + bank;
+		name[2] = '\0';
 	}
 
 	return name;
@@ -310,7 +297,14 @@ static int gpio_sunxi_bind(struct udevice *parent)
 }
 
 static const struct udevice_id sunxi_gpio_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-pinctrl" },
+	{ .compatible = "allwinner,sun5i-a10s-pinctrl" },
+	{ .compatible = "allwinner,sun5i-a13-pinctrl" },
+	{ .compatible = "allwinner,sun6i-a31-pinctrl" },
+	{ .compatible = "allwinner,sun6i-a31s-pinctrl" },
 	{ .compatible = "allwinner,sun7i-a20-pinctrl" },
+	{ .compatible = "allwinner,sun8i-a23-pinctrl" },
+	{ .compatible = "allwinner,sun9i-a80-pinctrl" },
 	{ }
 };
 
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 2233545..c4300f2 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -9,6 +9,7 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <malloc.h>
 #include <mmc.h>
 #include <asm/io.h>
@@ -37,7 +38,7 @@ static int sunxi_mmc_getcd_gpio(int sdc_no)
 	case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
 	case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
 	}
-	return -1;
+	return -EINVAL;
 }
 
 static int mmc_resource_init(int sdc_no)
@@ -72,7 +73,7 @@ static int mmc_resource_init(int sdc_no)
 	mmchost->mmc_no = sdc_no;
 
 	cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
-	if (cd_pin != -1) {
+	if (cd_pin >= 0) {
 		ret = gpio_request(cd_pin, "mmc_cd");
 		if (!ret)
 			ret = gpio_direction_input(cd_pin);
@@ -151,8 +152,7 @@ static int mmc_clk_io_on(int sdc_no)
 	/* config ahb clock */
 	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
 
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
-    defined(CONFIG_MACH_SUN9I)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	/* unassert reset */
 	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
 #endif
@@ -425,7 +425,7 @@ static int sunxi_mmc_getcd(struct mmc *mmc)
 	int cd_pin;
 
 	cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
-	if (cd_pin == -1)
+	if (cd_pin < 0)
 		return 1;
 
 	return !gpio_get_value(cd_pin);
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index 7b31f8c..e939bf2 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <linux/err.h>
 #include <malloc.h>
 #include <miiphy.h>
@@ -153,13 +154,16 @@ struct sunxi_sramc_regs {
 #define EMAC_CRCERR		(0x1 << 4)
 #define EMAC_LENERR		(0x3 << 5)
 
-#define DMA_CPU_TRRESHOLD	2000
+#define EMAC_RX_BUFSIZE		2000
 
 struct emac_eth_dev {
-	u32 speed;
-	u32 duplex;
-	u32 phy_configured;
+	struct emac_regs *regs;
+	struct mii_dev *bus;
+	struct phy_device *phydev;
 	int link_printed;
+#ifdef CONFIG_DM_ETH
+	uchar rx_buf[EMAC_RX_BUFSIZE];
+#endif
 };
 
 struct emac_rxhdr {
@@ -195,11 +199,10 @@ static void emac_outblk_32bit(void *reg, void *data, int count)
 }
 
 /* Read a word from phyxcer */
-static int emac_phy_read(const char *devname, unsigned char addr,
-			  unsigned char reg, unsigned short *value)
+static int emac_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
 {
-	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_eth_dev *priv = bus->priv;
+	struct emac_regs *regs = priv->regs;
 
 	/* issue the phy address and reg */
 	writel(addr << 8 | reg, &regs->mac_madr);
@@ -213,18 +216,16 @@ static int emac_phy_read(const char *devname, unsigned char addr,
 	/* push down the phy io line */
 	writel(0x0, &regs->mac_mcmd);
 
-	/* and write data */
-	*value = readl(&regs->mac_mrdd);
-
-	return 0;
+	/* And read data */
+	return readl(&regs->mac_mrdd);
 }
 
 /* Write a word to phyxcer */
-static int emac_phy_write(const char *devname, unsigned char addr,
-			   unsigned char reg, unsigned short value)
+static int emac_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+			  u16 value)
 {
-	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_eth_dev *priv = bus->priv;
+	struct emac_regs *regs = priv->regs;
 
 	/* issue the phy address and reg */
 	writel(addr << 8 | reg, &regs->mac_madr);
@@ -244,12 +245,44 @@ static int emac_phy_write(const char *devname, unsigned char addr,
 	return 0;
 }
 
-static void emac_setup(struct eth_device *dev)
+static int sunxi_emac_init_phy(struct emac_eth_dev *priv, void *dev)
+{
+	int ret, mask = 0xffffffff;
+
+#ifdef CONFIG_PHY_ADDR
+	mask = 1 << CONFIG_PHY_ADDR;
+#endif
+
+	priv->bus = mdio_alloc();
+	if (!priv->bus) {
+		printf("Failed to allocate MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	priv->bus->read = emac_mdio_read;
+	priv->bus->write = emac_mdio_write;
+	priv->bus->priv = priv;
+	strcpy(priv->bus->name, "emac");
+
+	ret = mdio_register(priv->bus);
+	if (ret)
+		return ret;
+
+	priv->phydev = phy_find_by_mask(priv->bus, mask,
+					PHY_INTERFACE_MODE_MII);
+	if (!priv->phydev)
+		return -ENODEV;
+
+	phy_connect_dev(priv->phydev, dev);
+	phy_config(priv->phydev);
+
+	return 0;
+}
+
+static void emac_setup(struct emac_eth_dev *priv)
 {
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_regs *regs = priv->regs;
 	u32 reg_val;
-	u16 phy_val;
-	u32 duplex_flag;
 
 	/* Set up TX */
 	writel(EMAC_TX_SETUP, &regs->tx_mode);
@@ -262,12 +295,8 @@ static void emac_setup(struct eth_device *dev)
 	writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
 
 	/* Set MAC CTL1 */
-	emac_phy_read(dev->name, 1, 0, &phy_val);
-	debug("PHY SETUP, reg 0 value: %x\n", phy_val);
-	duplex_flag = !!(phy_val & (1 << 8));
-
 	reg_val = 0;
-	if (duplex_flag)
+	if (priv->phydev->duplex == DUPLEX_FULL)
 		reg_val = (0x1 << 0);
 	writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
 
@@ -284,9 +313,9 @@ static void emac_setup(struct eth_device *dev)
 	writel(EMAC_MAC_MFL, &regs->mac_maxf);
 }
 
-static void emac_reset(struct eth_device *dev)
+static void emac_reset(struct emac_eth_dev *priv)
 {
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_regs *regs = priv->regs;
 
 	debug("resetting device\n");
 
@@ -298,11 +327,10 @@ static void emac_reset(struct eth_device *dev)
 	udelay(200);
 }
 
-static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
+static int _sunxi_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
 {
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-	struct emac_eth_dev *priv = dev->priv;
-	u16 phy_reg;
+	struct emac_regs *regs = priv->regs;
+	int ret;
 
 	/* Init EMAC */
 
@@ -320,41 +348,44 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
 	udelay(1);
 
 	/* Set up EMAC */
-	emac_setup(dev);
+	emac_setup(priv);
 
-	writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
-	       dev->enetaddr[2], &regs->mac_a1);
-	writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
-	       dev->enetaddr[5], &regs->mac_a0);
+	writel(enetaddr[0] << 16 | enetaddr[1] << 8 | enetaddr[2],
+	       &regs->mac_a1);
+	writel(enetaddr[3] << 16 | enetaddr[4] << 8 | enetaddr[5],
+	       &regs->mac_a0);
 
 	mdelay(1);
 
-	emac_reset(dev);
+	emac_reset(priv);
 
 	/* PHY POWER UP */
-	emac_phy_read(dev->name, 1, 0, &phy_reg);
-	emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
-	mdelay(1);
-
-	emac_phy_read(dev->name, 1, 0, &phy_reg);
-
-	priv->speed = miiphy_speed(dev->name, 0);
-	priv->duplex = miiphy_duplex(dev->name, 0);
+	ret = phy_startup(priv->phydev);
+	if (ret) {
+		printf("Could not initialize PHY %s\n",
+		       priv->phydev->dev->name);
+		return ret;
+	}
 
 	/* Print link status only once */
 	if (!priv->link_printed) {
 		printf("ENET Speed is %d Mbps - %s duplex connection\n",
-		       priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
+		       priv->phydev->speed,
+		       priv->phydev->duplex ? "FULL" : "HALF");
 		priv->link_printed = 1;
 	}
 
 	/* Set EMAC SPEED depend on PHY */
-	clrsetbits_le32(&regs->mac_supp, 1 << 8,
-			((phy_reg & (0x1 << 13)) >> 13) << 8);
+	if (priv->phydev->speed == SPEED_100)
+		setbits_le32(&regs->mac_supp, 1 << 8);
+	else
+		clrbits_le32(&regs->mac_supp, 1 << 8);
 
 	/* Set duplex depend on phy */
-	clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
-			((phy_reg & (0x1 << 8)) >> 8) << 0);
+	if (priv->phydev->duplex == DUPLEX_FULL)
+		setbits_le32(&regs->mac_ctl1, 1 << 0);
+	else
+		clrbits_le32(&regs->mac_ctl1, 1 << 0);
 
 	/* Enable RX/TX */
 	setbits_le32(&regs->ctl, 0x7);
@@ -362,14 +393,9 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
 	return 0;
 }
 
-static void sunxi_emac_eth_halt(struct eth_device *dev)
-{
-	/* Nothing to do here */
-}
-
-static int sunxi_emac_eth_recv(struct eth_device *dev)
+static int _sunxi_emac_eth_recv(struct emac_eth_dev *priv, void *packet)
 {
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_regs *regs = priv->regs;
 	struct emac_rxhdr rxhdr;
 	u32 rxcount;
 	u32 reg_val;
@@ -387,7 +413,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
 		/* Had one stuck? */
 		rxcount = readl(&regs->rx_fbc);
 		if (!rxcount)
-			return 0;
+			return -EAGAIN;
 	}
 
 	reg_val = readl(&regs->rx_io_data);
@@ -403,7 +429,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
 		/* Enable RX */
 		setbits_le32(&regs->ctl, 0x1 << 2);
 
-		return 0;
+		return -EAGAIN;
 	}
 
 	/* A packet ready now
@@ -433,24 +459,21 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
 
 	/* Move data from EMAC */
 	if (good_packet) {
-		if (rx_len > DMA_CPU_TRRESHOLD) {
+		if (rx_len > EMAC_RX_BUFSIZE) {
 			printf("Received packet is too big (len=%d)\n", rx_len);
-		} else {
-			emac_inblk_32bit((void *)&regs->rx_io_data,
-					 net_rx_packets[0], rx_len);
-
-			/* Pass to upper layer */
-			net_process_received_packet(net_rx_packets[0], rx_len);
-			return rx_len;
+			return -EMSGSIZE;
 		}
+		emac_inblk_32bit((void *)&regs->rx_io_data, packet, rx_len);
+		return rx_len;
 	}
 
-	return 0;
+	return -EIO; /* Bad packet */
 }
 
-static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
+static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet,
+				int len)
 {
-	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+	struct emac_regs *regs = priv->regs;
 
 	/* Select channel 0 */
 	writel(0, &regs->tx_ins);
@@ -467,31 +490,15 @@ static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
 	return 0;
 }
 
-int sunxi_emac_initialize(void)
+static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
 {
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct sunxi_sramc_regs *sram =
 		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
-	struct emac_regs *regs =
-		(struct emac_regs *)SUNXI_EMAC_BASE;
-	struct eth_device *dev;
-	struct emac_eth_dev *priv;
+	struct emac_regs *regs = priv->regs;
 	int pin;
 
-	dev = malloc(sizeof(*dev));
-	if (dev == NULL)
-		return -ENOMEM;
-
-	priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
-	if (!priv) {
-		free(dev);
-		return -ENOMEM;
-	}
-
-	memset(dev, 0, sizeof(*dev));
-	memset(priv, 0, sizeof(struct emac_eth_dev));
-
 	/* Map SRAM to EMAC */
 	setbits_le32(&sram->ctrl1, 0x5 << 2);
 
@@ -504,18 +511,77 @@ int sunxi_emac_initialize(void)
 
 	/* Set MII clock */
 	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
+}
+
+static int sunxi_emac_eth_start(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+
+	return _sunxi_emac_eth_init(dev->priv, pdata->enetaddr);
+}
+
+static int sunxi_emac_eth_send(struct udevice *dev, void *packet, int length)
+{
+	struct emac_eth_dev *priv = dev_get_priv(dev);
 
-	dev->iobase = (int)regs;
-	dev->priv = priv;
-	dev->init = sunxi_emac_eth_init;
-	dev->halt = sunxi_emac_eth_halt;
-	dev->send = sunxi_emac_eth_send;
-	dev->recv = sunxi_emac_eth_recv;
-	strcpy(dev->name, "emac");
+	return _sunxi_emac_eth_send(priv, packet, length);
+}
+
+static int sunxi_emac_eth_recv(struct udevice *dev, uchar **packetp)
+{
+	struct emac_eth_dev *priv = dev_get_priv(dev);
+	int rx_len;
 
-	eth_register(dev);
+	rx_len = _sunxi_emac_eth_recv(priv, priv->rx_buf);
+	*packetp = priv->rx_buf;
 
-	miiphy_register(dev->name, emac_phy_read, emac_phy_write);
+	return rx_len;
+}
+
+static void sunxi_emac_eth_stop(struct udevice *dev)
+{
+	/* Nothing to do here */
+}
+
+static int sunxi_emac_eth_probe(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+	struct emac_eth_dev *priv = dev_get_priv(dev);
+
+	priv->regs = (struct emac_regs *)pdata->iobase;
+	sunxi_emac_board_setup(priv);
+
+	return sunxi_emac_init_phy(priv, dev);
+}
+
+static const struct eth_ops sunxi_emac_eth_ops = {
+	.start			= sunxi_emac_eth_start,
+	.send			= sunxi_emac_eth_send,
+	.recv			= sunxi_emac_eth_recv,
+	.stop			= sunxi_emac_eth_stop,
+};
+
+static int sunxi_emac_eth_ofdata_to_platdata(struct udevice *dev)
+{
+	struct eth_pdata *pdata = dev_get_platdata(dev);
+
+	pdata->iobase = dev_get_addr(dev);
 
 	return 0;
 }
+
+static const struct udevice_id sunxi_emac_eth_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-emac" },
+	{ }
+};
+
+U_BOOT_DRIVER(eth_sunxi_emac) = {
+	.name	= "eth_sunxi_emac",
+	.id	= UCLASS_ETH,
+	.of_match = sunxi_emac_eth_ids,
+	.ofdata_to_platdata = sunxi_emac_eth_ofdata_to_platdata,
+	.probe	= sunxi_emac_eth_probe,
+	.ops	= &sunxi_emac_eth_ops,
+	.priv_auto_alloc_size = sizeof(struct emac_eth_dev),
+	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c
index 1d7be49..5161bc1 100644
--- a/drivers/power/axp209.c
+++ b/drivers/power/axp209.c
@@ -155,67 +155,3 @@ int axp209_power_button(void)
 
 	return v & AXP209_IRQ5_PEK_DOWN;
 }
-
-static u8 axp209_get_gpio_ctrl_reg(unsigned int pin)
-{
-	switch (pin) {
-	case 0: return AXP209_GPIO0_CTRL;
-	case 1: return AXP209_GPIO1_CTRL;
-	case 2: return AXP209_GPIO2_CTRL;
-	case 3: return AXP209_GPIO3_CTRL;
-	}
-	return 0;
-}
-
-int axp_gpio_direction_input(unsigned int pin)
-{
-	if (pin == SUNXI_GPIO_AXP0_VBUS_DETECT)
-		return 0;
-
-	u8 reg = axp209_get_gpio_ctrl_reg(pin);
-	/* GPIO3 is "special" */
-	u8 val = (pin == 3) ? AXP209_GPIO3_INPUT : AXP209_GPIO_INPUT;
-
-	return axp209_write(reg, val);
-}
-
-int axp_gpio_direction_output(unsigned int pin, unsigned int val)
-{
-	u8 reg = axp209_get_gpio_ctrl_reg(pin);
-
-	if (val) {
-		val = (pin == 3) ? AXP209_GPIO3_OUTPUT_HIGH :
-				   AXP209_GPIO_OUTPUT_HIGH;
-	} else {
-		val = (pin == 3) ? AXP209_GPIO3_OUTPUT_LOW :
-				   AXP209_GPIO_OUTPUT_LOW;
-	}
-
-	return axp209_write(reg, val);
-}
-
-int axp_gpio_get_value(unsigned int pin)
-{
-	u8 val, mask;
-	int rc;
-
-	if (pin == SUNXI_GPIO_AXP0_VBUS_DETECT) {
-		rc = axp209_read(AXP209_POWER_STATUS, &val);
-		mask = AXP209_POWER_STATUS_VBUS_USABLE;
-	} else if (pin == 3) {
-		rc = axp209_read(AXP209_GPIO3_CTRL, &val);
-		mask = 1;
-	} else {
-		rc = axp209_read(AXP209_GPIO_STATE, &val);
-		mask = 1 << (pin + 4);
-	}
-	if (rc)
-		return rc;
-
-	return (val & mask) ? 1 : 0;
-}
-
-int axp_gpio_set_value(unsigned int pin, unsigned int val)
-{
-	return axp_gpio_direction_output(pin, val);
-}
diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
index dc3a7f1..7bbaec8 100644
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -12,50 +12,10 @@
 
 #include <common.h>
 #include <errno.h>
-#include <asm/arch/p2wi.h>
-#include <asm/arch/rsb.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/pmic_bus.h>
 #include <axp221.h>
 
-/*
- * The axp221 uses the p2wi bus, the axp223 is identical (for all registers
- * used sofar) but uses the rsb bus. These functions abstract this.
- */
-static int pmic_bus_init(void)
-{
-#ifdef CONFIG_MACH_SUN6I
-	p2wi_init();
-	return p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
-					AXP221_INIT_DATA);
-#else
-	int ret;
-
-	ret = rsb_init();
-	if (ret)
-		return ret;
-
-	return rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
-#endif
-}
-
-static int pmic_bus_read(const u8 addr, u8 *data)
-{
-#ifdef CONFIG_MACH_SUN6I
-	return p2wi_read(addr, data);
-#else
-	return rsb_read(AXP223_RUNTIME_ADDR, addr, data);
-#endif
-}
-
-static int pmic_bus_write(const u8 addr, u8 data)
-{
-#ifdef CONFIG_MACH_SUN6I
-	return p2wi_write(addr, data);
-#else
-	return rsb_write(AXP223_RUNTIME_ADDR, addr, data);
-#endif
-}
-
 static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
 {
 	if (mvolt < min)
@@ -66,52 +26,26 @@ static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
 	return (mvolt - min) / div;
 }
 
-static int axp221_setbits(u8 reg, u8 bits)
-{
-	int ret;
-	u8 val;
-
-	ret = pmic_bus_read(reg, &val);
-	if (ret)
-		return ret;
-
-	val |= bits;
-	return pmic_bus_write(reg, val);
-}
-
-static int axp221_clrbits(u8 reg, u8 bits)
-{
-	int ret;
-	u8 val;
-
-	ret = pmic_bus_read(reg, &val);
-	if (ret)
-		return ret;
-
-	val &= ~bits;
-	return pmic_bus_write(reg, val);
-}
-
 int axp221_set_dcdc1(unsigned int mvolt)
 {
 	int ret;
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_DCDC1_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_DCDC1_EN);
 
 	ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	ret = axp221_setbits(AXP221_OUTPUT_CTRL2,
-			     AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
+	ret = pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+			       AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_DCDC1_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_DCDC1_EN);
 }
 
 int axp221_set_dcdc2(unsigned int mvolt)
@@ -120,15 +54,15 @@ int axp221_set_dcdc2(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_DCDC2_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_DCDC2_EN);
 
 	ret = pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_DCDC2_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_DCDC2_EN);
 }
 
 int axp221_set_dcdc3(unsigned int mvolt)
@@ -137,15 +71,15 @@ int axp221_set_dcdc3(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_DCDC3_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_DCDC3_EN);
 
 	ret = pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_DCDC3_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_DCDC3_EN);
 }
 
 int axp221_set_dcdc4(unsigned int mvolt)
@@ -154,15 +88,15 @@ int axp221_set_dcdc4(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_DCDC4_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_DCDC4_EN);
 
 	ret = pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_DCDC4_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_DCDC4_EN);
 }
 
 int axp221_set_dcdc5(unsigned int mvolt)
@@ -171,15 +105,15 @@ int axp221_set_dcdc5(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_DCDC5_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_DCDC5_EN);
 
 	ret = pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_DCDC5_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_DCDC5_EN);
 }
 
 int axp221_set_dldo1(unsigned int mvolt)
@@ -188,15 +122,15 @@ int axp221_set_dldo1(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL2,
-				      AXP221_OUTPUT_CTRL2_DLDO1_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+					AXP221_OUTPUT_CTRL2_DLDO1_EN);
 
 	ret = pmic_bus_write(AXP221_DLDO1_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL2,
-			      AXP221_OUTPUT_CTRL2_DLDO1_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+				AXP221_OUTPUT_CTRL2_DLDO1_EN);
 }
 
 int axp221_set_dldo2(unsigned int mvolt)
@@ -205,15 +139,15 @@ int axp221_set_dldo2(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL2,
-				      AXP221_OUTPUT_CTRL2_DLDO2_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+					AXP221_OUTPUT_CTRL2_DLDO2_EN);
 
 	ret = pmic_bus_write(AXP221_DLDO2_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL2,
-			      AXP221_OUTPUT_CTRL2_DLDO2_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+				AXP221_OUTPUT_CTRL2_DLDO2_EN);
 }
 
 int axp221_set_dldo3(unsigned int mvolt)
@@ -222,15 +156,15 @@ int axp221_set_dldo3(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL2,
-				      AXP221_OUTPUT_CTRL2_DLDO3_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+					AXP221_OUTPUT_CTRL2_DLDO3_EN);
 
 	ret = pmic_bus_write(AXP221_DLDO3_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL2,
-			      AXP221_OUTPUT_CTRL2_DLDO3_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+				AXP221_OUTPUT_CTRL2_DLDO3_EN);
 }
 
 int axp221_set_dldo4(unsigned int mvolt)
@@ -239,15 +173,15 @@ int axp221_set_dldo4(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL2,
-				      AXP221_OUTPUT_CTRL2_DLDO4_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+					AXP221_OUTPUT_CTRL2_DLDO4_EN);
 
 	ret = pmic_bus_write(AXP221_DLDO4_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL2,
-			      AXP221_OUTPUT_CTRL2_DLDO4_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+				AXP221_OUTPUT_CTRL2_DLDO4_EN);
 }
 
 int axp221_set_aldo1(unsigned int mvolt)
@@ -256,15 +190,15 @@ int axp221_set_aldo1(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_ALDO1_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_ALDO1_EN);
 
 	ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_ALDO1_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_ALDO1_EN);
 }
 
 int axp221_set_aldo2(unsigned int mvolt)
@@ -273,15 +207,15 @@ int axp221_set_aldo2(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL1,
-				      AXP221_OUTPUT_CTRL1_ALDO2_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+					AXP221_OUTPUT_CTRL1_ALDO2_EN);
 
 	ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL1,
-			      AXP221_OUTPUT_CTRL1_ALDO2_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+				AXP221_OUTPUT_CTRL1_ALDO2_EN);
 }
 
 int axp221_set_aldo3(unsigned int mvolt)
@@ -290,15 +224,15 @@ int axp221_set_aldo3(unsigned int mvolt)
 	u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL3,
-				      AXP221_OUTPUT_CTRL3_ALDO3_EN);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL3,
+					AXP221_OUTPUT_CTRL3_ALDO3_EN);
 
 	ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL3,
-			      AXP221_OUTPUT_CTRL3_ALDO3_EN);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL3,
+				AXP221_OUTPUT_CTRL3_ALDO3_EN);
 }
 
 int axp221_set_eldo(int eldo_num, unsigned int mvolt)
@@ -325,13 +259,13 @@ int axp221_set_eldo(int eldo_num, unsigned int mvolt)
 	}
 
 	if (mvolt == 0)
-		return axp221_clrbits(AXP221_OUTPUT_CTRL2, bits);
+		return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2, bits);
 
 	ret = pmic_bus_write(addr, cfg);
 	if (ret)
 		return ret;
 
-	return axp221_setbits(AXP221_OUTPUT_CTRL2, bits);
+	return pmic_bus_setbits(AXP221_OUTPUT_CTRL2, bits);
 }
 
 int axp221_init(void)
@@ -385,67 +319,3 @@ int axp221_get_sid(unsigned int *sid)
 
 	return 0;
 }
-
-int axp_gpio_direction_input(unsigned int pin)
-{
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_DETECT:
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_direction_output(unsigned int pin, unsigned int val)
-{
-	int ret;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		ret = axp221_clrbits(AXP221_MISC_CTRL,
-				     AXP221_MISC_CTRL_N_VBUSEN_FUNC);
-		if (ret)
-			return ret;
-
-		return axp_gpio_set_value(pin, val);
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_get_value(unsigned int pin)
-{
-	int ret;
-	u8 val;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_DETECT:
-		ret = pmic_bus_read(AXP221_POWER_STATUS, &val);
-		if (ret)
-			return ret;
-
-		return !!(val & AXP221_POWER_STATUS_VBUS_AVAIL);
-	default:
-		return -EINVAL;
-	}
-}
-
-int axp_gpio_set_value(unsigned int pin, unsigned int val)
-{
-	int ret;
-
-	switch (pin) {
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		if (val)
-			ret = axp221_setbits(AXP221_VBUS_IPSOUT,
-					     AXP221_VBUS_IPSOUT_DRIVEBUS);
-		else
-			ret = axp221_clrbits(AXP221_VBUS_IPSOUT,
-					     AXP221_VBUS_IPSOUT_DRIVEBUS);
-
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index eda9f69..0edb643 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -1,7 +1,8 @@
 /*
- * Copyright (C) 2014 Roman Byshko
+ * Sunxi ehci glue
  *
- * Roman Byshko <rbyshko@gmail.com>
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
  *
  * Based on code from
  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
@@ -9,23 +10,32 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include <asm/arch/usbc.h>
 #include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/io.h>
 #include "ehci.h"
 
 int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
 		struct ehci_hcor **hcor)
 {
-	int err;
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int ahb_gate_offset;
 
-	err = sunxi_usbc_request_resources(index + 1);
-	if (err)
-		return err;
+	ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
+				  AHB_GATE_OFFSET_USB_EHCI0;
+	setbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
+#endif
 
-	sunxi_usbc_enable(index + 1);
-	sunxi_usbc_vbus_enable(index + 1);
+	sunxi_usb_phy_init(index + 1);
+	sunxi_usb_phy_power_on(index + 1);
 
-	*hccr = sunxi_usbc_get_io_base(index + 1);
+	if (index == 0)
+		*hccr = (void *)SUNXI_USB1_BASE;
+	else
+		*hccr = (void *)SUNXI_USB2_BASE;
 
 	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
 				+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
@@ -39,8 +49,18 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
 
 int ehci_hcd_stop(int index)
 {
-	sunxi_usbc_vbus_disable(index + 1);
-	sunxi_usbc_disable(index + 1);
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	int ahb_gate_offset;
 
-	return sunxi_usbc_free_resources(index + 1);
+	sunxi_usb_phy_power_off(index + 1);
+	sunxi_usb_phy_exit(index + 1);
+
+	ahb_gate_offset = index ? AHB_GATE_OFFSET_USB_EHCI1 :
+				  AHB_GATE_OFFSET_USB_EHCI0;
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << ahb_gate_offset);
+#endif
+	clrbits_le32(&ccm->ahb_gate0, 1 << ahb_gate_offset);
+
+	return 0;
 }
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index 27e4ed4..90288c4 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -458,8 +458,13 @@ static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
+#ifdef CONFIG_MACH_SUN8I_A33
+	/* <Sigh> allwinner saves a reg, and we need to hardcode this */
+	return 0xde;
+#else
 	musb_writeb(mbase, MUSB_INDEX, 0);
 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+#endif
 }
 
 static inline u16 musb_read_hwvers(void __iomem *mbase)
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 7d90ebc..d1ee5f8 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -1,7 +1,7 @@
 #include <common.h>
 #include <watchdog.h>
 #ifdef CONFIG_ARCH_SUNXI
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
 #endif
 #include <asm/errno.h>
 #include <linux/usb/ch9.h>
@@ -195,12 +195,12 @@ int usb_reset_root_port(void)
 	 * when clearing reset on low-speed devices, temporary disable
 	 * squelch detection to work around this.
 	 */
-	sunxi_usbc_enable_squelch_detect(0, 0);
+	sunxi_usb_phy_enable_squelch_detect(0, 0);
 #endif
 	power = musb_readb(mbase, MUSB_POWER);
 	musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
 #ifdef CONFIG_ARCH_SUNXI
-	sunxi_usbc_enable_squelch_detect(0, 1);
+	sunxi_usb_phy_enable_squelch_detect(0, 1);
 #endif
 	host->isr(0, host);
 	host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index c9a6a16..e8a3a23 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -22,8 +22,9 @@
  */
 #include <common.h>
 #include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
 #include <asm-generic/gpio.h>
 #include "linux-compat.h"
 #include "musb_core.h"
@@ -213,43 +214,57 @@ static void sunxi_musb_enable(struct musb *musb)
 
 	if (is_host_enabled(musb)) {
 		/* port power on */
-		sunxi_usbc_vbus_enable(0);
+		sunxi_usb_phy_power_on(0);
 	}
 }
 
 static void sunxi_musb_disable(struct musb *musb)
 {
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
 	pr_debug("%s():\n", __func__);
 
 	/* Put the controller back in a pristane state for "usb reset" */
 	if (musb->is_active) {
-		sunxi_usbc_disable(0);
-		sunxi_usbc_enable(0);
+		sunxi_usb_phy_exit(0);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+		clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+#endif
+		clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+
+		mdelay(10);
+
+		setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+		setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+#endif
+		sunxi_usb_phy_init(0);
 		musb->is_active = 0;
 	}
 }
 
 static int sunxi_musb_init(struct musb *musb)
 {
+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	int err;
 
 	pr_debug("%s():\n", __func__);
 
-	err = sunxi_usbc_request_resources(0);
-	if (err)
-		return err;
-
 	if (is_host_enabled(musb)) {
-		err = sunxi_usbc_vbus_detect(0);
+		err = sunxi_usb_phy_vbus_detect(0);
 		if (err) {
 			eprintf("Error: A charger is plugged into the OTG\n");
-			sunxi_usbc_free_resources(0);
 			return -EIO;
 		}
 	}
 
 	musb->isr = sunxi_musb_interrupt;
-	sunxi_usbc_enable(0);
+
+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+#endif
+	sunxi_usb_phy_init(0);
 
 	USBC_ConfigFIFO_Base();
 	USBC_EnableDpDmPullUp(musb->mregs);
@@ -273,10 +288,10 @@ static int sunxi_musb_exit(struct musb *musb)
 
 	USBC_DisableDpDmPullUp(musb->mregs);
 	USBC_DisableIdPullUp(musb->mregs);
-	sunxi_usbc_vbus_disable(0);
-	sunxi_usbc_disable(0);
+	sunxi_usb_phy_power_off(0);
+	sunxi_usb_phy_exit(0);
 
-	return sunxi_usbc_free_resources(0);
+	return 0;
 }
 
 const struct musb_platform_ops sunxi_musb_ops = {
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index d2341b0..48dbdf5 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -84,7 +84,7 @@ static int sunxi_hdmi_hpd_detect(int hpd_delay)
 			CCM_HDMI_CTRL_PLL3);
 
 	/* Set ahb gating to pass */
-#ifdef CONFIG_MACH_SUN6I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
 #endif
 	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
@@ -113,7 +113,7 @@ static void sunxi_hdmi_shutdown(void)
 	clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE);
 	clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
 	clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
-#ifdef CONFIG_MACH_SUN6I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
 #endif
 	clock_set_pll3(0);
@@ -404,7 +404,7 @@ static void sunxi_composer_init(void)
 
 	sunxi_frontend_init();
 
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	/* Reset off */
 	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0);
 #endif
@@ -549,7 +549,7 @@ static void sunxi_lcdc_init(void)
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
 
 	/* Reset off */
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
 #else
 	setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST);
@@ -600,19 +600,19 @@ static void sunxi_lcdc_panel_enable(void)
 	 * white while the lcd inits.
 	 */
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
-	if (pin != -1) {
+	if (pin >= 0) {
 		gpio_request(pin, "lcd_backlight_enable");
 		gpio_direction_output(pin, 0);
 	}
 
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
-	if (pin != -1) {
+	if (pin >= 0) {
 		gpio_request(pin, "lcd_backlight_pwm");
 		gpio_direction_output(pin, PWM_OFF);
 	}
 
 	reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
-	if (reset_pin != -1) {
+	if (reset_pin >= 0) {
 		gpio_request(reset_pin, "lcd_reset");
 		gpio_direction_output(reset_pin, 0); /* Assert reset */
 	}
@@ -620,12 +620,12 @@ static void sunxi_lcdc_panel_enable(void)
 	/* Give the backlight some time to turn off and power up the panel. */
 	mdelay(40);
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
-	if (pin != -1) {
+	if (pin >= 0) {
 		gpio_request(pin, "lcd_power");
 		gpio_direction_output(pin, 1);
 	}
 
-	if (reset_pin != -1)
+	if (reset_pin >= 0)
 		gpio_direction_output(reset_pin, 1); /* De-assert reset */
 }
 
@@ -640,11 +640,11 @@ static void sunxi_lcdc_backlight_enable(void)
 	mdelay(40);
 
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
-	if (pin != -1)
+	if (pin >= 0)
 		gpio_direction_output(pin, 1);
 
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
-	if (pin != -1)
+	if (pin >= 0)
 		gpio_direction_output(pin, PWM_ON);
 }
 
@@ -942,11 +942,14 @@ static void sunxi_vga_enable(void)
 
 static void sunxi_drc_init(void)
 {
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
+#ifdef CONFIG_SUNXI_GEN_SUN6I
 	struct sunxi_ccm_reg * const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
 	/* On sun6i the drc must be clocked even when in pass-through mode */
+#ifdef CONFIG_MACH_SUN8I_A33
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_SAT);
+#endif
 	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0);
 	clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000);
 #endif
@@ -958,7 +961,7 @@ static void sunxi_vga_external_dac_enable(void)
 	int pin;
 
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN);
-	if (pin != -1) {
+	if (pin >= 0) {
 		gpio_request(pin, "vga_enable");
 		gpio_direction_output(pin, 1);
 	}
diff --git a/include/axp152.h b/include/axp152.h
index 9d205f8..c3aef77 100644
--- a/include/axp152.h
+++ b/include/axp152.h
@@ -15,6 +15,17 @@ enum axp152_reg {
 
 #define AXP152_POWEROFF			(1 << 7)
 
+/* For axp_gpio.c */
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x91
+#define AXP_GPIO2_CTRL			0x92
+#define AXP_GPIO3_CTRL			0x93
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x97
+#define AXP_GPIO_STATE_OFFSET			0
+
 int axp152_set_dcdc2(int mvolt);
 int axp152_set_dcdc3(int mvolt);
 int axp152_set_dcdc4(int mvolt);
diff --git a/include/axp209.h b/include/axp209.h
index d36da41..6170202 100644
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -18,11 +18,6 @@ enum axp209_reg {
 	AXP209_IRQ_ENABLE5 = 0x44,
 	AXP209_IRQ_STATUS5 = 0x4c,
 	AXP209_SHUTDOWN = 0x32,
-	AXP209_GPIO0_CTRL = 0x90,
-	AXP209_GPIO1_CTRL = 0x92,
-	AXP209_GPIO2_CTRL = 0x93,
-	AXP209_GPIO_STATE = 0x94,
-	AXP209_GPIO3_CTRL = 0x95,
 };
 
 #define AXP209_POWER_STATUS_ON_BY_DC	(1 << 0)
@@ -33,16 +28,17 @@ enum axp209_reg {
 
 #define AXP209_POWEROFF			(1 << 7)
 
-#define AXP209_GPIO_OUTPUT_LOW		0x00 /* Drive pin low */
-#define AXP209_GPIO_OUTPUT_HIGH		0x01 /* Drive pin high */
-#define AXP209_GPIO_INPUT		0x02 /* Float pin */
-
-/* GPIO3 is different from the others */
-#define AXP209_GPIO3_OUTPUT_LOW		0x00 /* Drive pin low, Output mode */
-#define AXP209_GPIO3_OUTPUT_HIGH	0x02 /* Float pin, Output mode */
-#define AXP209_GPIO3_INPUT		0x06 /* Float pin, Input mode */
-
-#define AXP_GPIO
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS		0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x92
+#define AXP_GPIO2_CTRL			0x93
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x94
+#define AXP_GPIO_STATE_OFFSET			4
 
 extern int axp209_set_dcdc2(int mvolt);
 extern int axp209_set_dcdc3(int mvolt);
@@ -52,8 +48,3 @@ extern int axp209_set_ldo4(int mvolt);
 extern int axp209_init(void);
 extern int axp209_poweron_by_dc(void);
 extern int axp209_power_button(void);
-
-extern int axp_gpio_direction_input(unsigned int pin);
-extern int axp_gpio_direction_output(unsigned int pin, unsigned int val);
-extern int axp_gpio_get_value(unsigned int pin);
-extern int axp_gpio_set_value(unsigned int pin, unsigned int val);
diff --git a/include/axp221.h b/include/axp221.h
index 0aac04d..9c87162 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -6,17 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-
 /* Page 0 addresses */
-#define AXP221_POWER_STATUS	0x00
-#define AXP221_POWER_STATUS_VBUS_AVAIL	(1 << 5)
-#define AXP221_POWER_STATUS_VBUS_USABLE	(1 << 4)
 #define AXP221_CHIP_ID		0x03
 #define AXP221_OUTPUT_CTRL1	0x10
 #define AXP221_OUTPUT_CTRL1_DCDC0_EN	(1 << 0)
@@ -62,7 +52,16 @@
 /* Page 1 addresses */
 #define AXP221_SID		0x20
 
-#define AXP_GPIO
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS		0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x94
+#define AXP_GPIO_STATE_OFFSET			0
 
 int axp221_set_dcdc1(unsigned int mvolt);
 int axp221_set_dcdc2(unsigned int mvolt);
@@ -79,8 +78,3 @@ int axp221_set_aldo3(unsigned int mvolt);
 int axp221_set_eldo(int eldo_num, unsigned int mvolt);
 int axp221_init(void);
 int axp221_get_sid(unsigned int *sid);
-
-int axp_gpio_direction_input(unsigned int pin);
-int axp_gpio_direction_output(unsigned int pin, unsigned int val);
-int axp_gpio_get_value(unsigned int pin);
-int axp_gpio_set_value(unsigned int pin, unsigned int val);
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index 7cd5c69..ea079eb 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -17,6 +17,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #endif
 
+#define CONFIG_SUNXI_USB_PHYS	3
+
 /*
  * Include common sunxi configuration where most the settings are
  */
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index e0470d4..d257659 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -17,6 +17,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
 #endif
 
+#define CONFIG_SUNXI_USB_PHYS	2
+
 /*
  * Include common sunxi configuration where most the settings are
  */
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index 617c1cd..2c24bd2 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -20,6 +20,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #endif
 
+#define CONFIG_SUNXI_USB_PHYS	3
+
 /*
  * Include common sunxi configuration where most the settings are
  */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 7fa7cec..56101a9 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -18,6 +18,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #endif
 
+#define CONFIG_SUNXI_USB_PHYS	3
+
 #define CONFIG_ARMV7_PSCI		1
 #define CONFIG_ARMV7_SECURE_BASE	SUNXI_SRAM_B_BASE
 #define CONFIG_TIMER_CLK_FREQ		24000000
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 79796d7..7111c63 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -18,6 +18,8 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
 #endif
 
+#define CONFIG_SUNXI_USB_PHYS	2
+
 /*
  * Include common sunxi configuration where most the settings are
  */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 365d9a5..c8ebb54 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -41,7 +41,7 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x4a000000
 
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL)
 # define CONFIG_DW_SERIAL
 #endif
 
@@ -195,14 +195,15 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #endif
 
-#define CONFIG_SYS_I2C
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
     defined CONFIG_I2C4_ENABLE
+#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
-#endif
 #define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
+#define CONFIG_CMD_I2C
+#endif
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 #define CONFIG_SYS_I2C_SOFT
@@ -222,8 +223,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_VIDEO_LCD_I2C_BUS	-1 /* NA, but necessary to compile */
 #endif
 
-#define CONFIG_CMD_I2C
-
 /* PMU */
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
 #define CONFIG_SPL_POWER_SUPPORT
@@ -284,7 +283,9 @@ extern int soft_i2c_gpio_scl;
 
 /* Ethernet support */
 #ifdef CONFIG_SUNXI_EMAC
+#define CONFIG_PHY_ADDR		1
 #define CONFIG_MII			/* MII PHY management		*/
+#define CONFIG_PHYLIB
 #endif
 
 #ifdef CONFIG_SUNXI_GMAC
@@ -401,7 +402,7 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONSOLE_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
-	"fdtfile=" CONFIG_FDTFILE "\0" \
+	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
 	BOOTENV
 
diff --git a/include/dt-bindings/dma/sun4i-a10.h b/include/dt-bindings/dma/sun4i-a10.h
new file mode 100644
index 0000000..8caba9e
--- /dev/null
+++ b/include/dt-bindings/dma/sun4i-a10.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_DMA_SUN4I_A10_H_
+#define __DT_BINDINGS_DMA_SUN4I_A10_H_
+
+#define SUN4I_DMA_NORMAL	0
+#define SUN4I_DMA_DEDICATED	1
+
+#endif /* __DT_BINDINGS_DMA_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/pinctrl/sun4i-a10.h b/include/dt-bindings/pinctrl/sun4i-a10.h
new file mode 100644
index 0000000..f7553c1
--- /dev/null
+++ b/include/dt-bindings/pinctrl/sun4i-a10.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+#define __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+
+#define SUN4I_PINCTRL_10_MA	0
+#define SUN4I_PINCTRL_20_MA	1
+#define SUN4I_PINCTRL_30_MA	2
+#define SUN4I_PINCTRL_40_MA	3
+
+#define SUN4I_PINCTRL_NO_PULL	0
+#define SUN4I_PINCTRL_PULL_UP	1
+#define SUN4I_PINCTRL_PULL_DOWN	2
+
+#endif /* __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h
new file mode 100644
index 0000000..b5e6b00
--- /dev/null
+++ b/include/dt-bindings/thermal/thermal.h
@@ -0,0 +1,17 @@
+/*
+ * This header provides constants for most thermal bindings.
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *	Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_THERMAL_H
+#define _DT_BINDINGS_THERMAL_THERMAL_H
+
+/* On cooling devices upper and lower limits */
+#define THERMAL_NO_LIMIT		(~0)
+
+#endif
+
diff --git a/include/netdev.h b/include/netdev.h
index d96e1da..662d173 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -80,8 +80,6 @@ int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
 int smc91111_initialize(u8 dev_num, int base_addr);
 int smc911x_initialize(u8 dev_num, int base_addr);
-int sunxi_emac_initialize(bd_t *bis);
-int sunxi_gmac_initialize(bd_t *bis);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);