diff options
| author | Ian Campbell <ijc@hellion.org.uk> | 2014-05-05 11:52:28 +0100 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-05-25 16:25:12 +0200 |
| commit | 5835823da3a357468bc90c2b74bad3193555b918 (patch) | |
| tree | 64be8d3ae9e0dd8e0d69935130ddda0e422e4c96 | |
| parent | 7d20d7eb1334706546708acd966c0c7f807726e8 (diff) | |
| download | u-boot-imx-5835823da3a357468bc90c2b74bad3193555b918.zip u-boot-imx-5835823da3a357468bc90c2b74bad3193555b918.tar.gz u-boot-imx-5835823da3a357468bc90c2b74bad3193555b918.tar.bz2 | |
sunxi: add gmac Ethernet support
Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i)
processors. Enable for the Cubietruck.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/board.c | 23 | ||||
| -rw-r--r-- | board/sunxi/Makefile | 1 | ||||
| -rw-r--r-- | board/sunxi/gmac.c | 32 | ||||
| -rw-r--r-- | boards.cfg | 2 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 17 | ||||
| -rw-r--r-- | include/netdev.h | 1 |
6 files changed, 75 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b5c0cb7..49c9448 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -11,6 +11,8 @@ */ #include <common.h> +#include <netdev.h> +#include <miiphy.h> #include <serial.h> #ifdef CONFIG_SPL_BUILD #include <spl.h> @@ -86,3 +88,24 @@ void enable_caches(void) dcache_enable(); } #endif + +#ifdef CONFIG_CMD_NET +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + int rc; + +#ifdef CONFIG_SUNXI_GMAC + rc = sunxi_gmac_initialize(bis); + if (rc < 0) { + printf("sunxi: failed to initialize gmac\n"); + return rc; + } +#endif + + return 0; +} +#endif diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 18b1e11..cbf8f08 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -9,4 +9,5 @@ # SPDX-License-Identifier: GPL-2.0+ # obj-y += board.o +obj-$(CONFIG_SUNXI_GMAC) += gmac.o obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c new file mode 100644 index 0000000..e48328d --- /dev/null +++ b/board/sunxi/gmac.c @@ -0,0 +1,32 @@ +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> + +int sunxi_gmac_initialize(bd_t *bis) +{ + int pin; + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set up clock gating */ + setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); + + /* Set MII clock */ + setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII); + + /* Configure pin mux settings for GMAC */ + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { + /* skip unused pins in RGMII mode */ + if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) + continue; + sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC); + sunxi_gpio_set_drv(pin, 3); + } + + return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII); +} @@ -379,7 +379,7 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak <p.marczak@samsung.com> Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com> Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - -Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL - +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org> Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3f7e314..e844110 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -127,6 +127,23 @@ #define CONFIG_CONS_INDEX 1 /* UART0 */ +#ifdef CONFIG_SUNXI_GMAC +#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ +#define CONFIG_DW_AUTONEG +#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ +#define CONFIG_PHY_ADDR 1 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_PHYLIB +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DNS +#define CONFIG_NETCONSOLE +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ diff --git a/include/netdev.h b/include/netdev.h index e211f18..63481ec 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,6 +78,7 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_gmac_initialize(bd_t *bis); int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); |