fpga: altera: More indentation trimdown

Further improve the indentation in the rest of the file, where
the indentation is initially a bit less brutal. There is no
functional change in this patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>

1 files changed, 120 insertions, 118 deletions

diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c
index 6394afe..b0f323f 100644
--- a/drivers/fpga/altera.c
+++ b/drivers/fpga/altera.c
@@ -26,40 +26,41 @@ int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;	/* assume a failure */
 
-	if (!altera_validate (desc, (char *)__func__)) {
+	if (!altera_validate(desc, (char *)__func__)) {
 		printf("%s: Invalid device descriptor\n", __func__);
-	} else {
-		switch (desc->family) {
-		case Altera_ACEX1K:
-		case Altera_CYC2:
+		return FPGA_FAIL;
+	}
+
+	switch (desc->family) {
+	case Altera_ACEX1K:
+	case Altera_CYC2:
 #if defined(CONFIG_FPGA_ACEX1K)
-			debug_cond(FPGA_DEBUG,
-				   "%s: Launching the ACEX1K Loader...\n",
-				   __func__);
-			ret_val = ACEX1K_load (desc, buf, bsize);
+		debug_cond(FPGA_DEBUG,
+			   "%s: Launching the ACEX1K Loader...\n",
+			   __func__);
+		ret_val = ACEX1K_load (desc, buf, bsize);
 #elif defined(CONFIG_FPGA_CYCLON2)
-			debug_cond(FPGA_DEBUG,
-				   "%s: Launching the CYCLONE II Loader...\n",
-				   __func__);
-			ret_val = CYC2_load (desc, buf, bsize);
+		debug_cond(FPGA_DEBUG,
+			   "%s: Launching the CYCLONE II Loader...\n",
+			   __func__);
+		ret_val = CYC2_load (desc, buf, bsize);
 #else
-			printf("%s: No support for ACEX1K devices.\n",
-			       __func__);
+		printf("%s: No support for ACEX1K devices.\n",
+		       __func__);
 #endif
-			break;
+		break;
 
 #if defined(CONFIG_FPGA_STRATIX_II)
-		case Altera_StratixII:
-			debug_cond(FPGA_DEBUG,
-				   "%s: Launching the Stratix II Loader...\n",
-				   __func__);
-			ret_val = StratixII_load (desc, buf, bsize);
-			break;
+	case Altera_StratixII:
+		debug_cond(FPGA_DEBUG,
+			   "%s: Launching the Stratix II Loader...\n",
+			   __func__);
+		ret_val = StratixII_load (desc, buf, bsize);
+		break;
 #endif
-		default:
-			printf("%s: Unsupported family type, %d\n",
-			       __func__, desc->family);
-		}
+	default:
+		printf("%s: Unsupported family type, %d\n",
+		       __func__, desc->family);
 	}
 
 	return ret_val;
@@ -71,125 +72,126 @@ int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
 
 	if (!altera_validate (desc, (char *)__func__)) {
 		printf("%s: Invalid device descriptor\n", __func__);
-	} else {
-		switch (desc->family) {
-		case Altera_ACEX1K:
+		return FPGA_FAIL;
+	}
+
+	switch (desc->family) {
+	case Altera_ACEX1K:
 #if defined(CONFIG_FPGA_ACEX)
-			debug_cond(FPGA_DEBUG,
-				   "%s: Launching the ACEX1K Reader...\n",
-				   __func__);
-			ret_val = ACEX1K_dump (desc, buf, bsize);
+		debug_cond(FPGA_DEBUG,
+			   "%s: Launching the ACEX1K Reader...\n",
+			   __func__);
+		ret_val = ACEX1K_dump (desc, buf, bsize);
 #else
-			printf("%s: No support for ACEX1K devices.\n",
-			       __func__);
+		printf("%s: No support for ACEX1K devices.\n",
+		       __func__);
 #endif
-			break;
+		break;
 
 #if defined(CONFIG_FPGA_STRATIX_II)
-		case Altera_StratixII:
-			debug_cond(FPGA_DEBUG,
-				   "%s: Launching the Stratix II Reader...\n",
-				   __func__);
-			ret_val = StratixII_dump (desc, buf, bsize);
-			break;
+	case Altera_StratixII:
+		debug_cond(FPGA_DEBUG,
+			   "%s: Launching the Stratix II Reader...\n",
+			   __func__);
+		ret_val = StratixII_dump (desc, buf, bsize);
+		break;
 #endif
-		default:
-			printf("%s: Unsupported family type, %d\n",
-			       __func__, desc->family);
-		}
+	default:
+		printf("%s: Unsupported family type, %d\n",
+		       __func__, desc->family);
 	}
 
 	return ret_val;
 }
 
-int altera_info( Altera_desc *desc )
+int altera_info(Altera_desc *desc)
 {
 	int ret_val = FPGA_FAIL;
 
-	if (altera_validate (desc, (char *)__func__)) {
-		printf("Family:        \t");
-		switch (desc->family) {
-		case Altera_ACEX1K:
-			printf("ACEX1K\n");
-			break;
-		case Altera_CYC2:
-			printf("CYCLON II\n");
-			break;
-		case Altera_StratixII:
-			printf("Stratix II\n");
-			break;
-			/* Add new family types here */
-		default:
-			printf("Unknown family type, %d\n", desc->family);
-		}
+	if (!altera_validate (desc, (char *)__func__)) {
+		printf("%s: Invalid device descriptor\n", __func__);
+		return FPGA_FAIL;
+	}
 
-		printf("Interface type:\t");
-		switch (desc->iface) {
-		case passive_serial:
-			printf("Passive Serial (PS)\n");
-			break;
-		case passive_parallel_synchronous:
-			printf("Passive Parallel Synchronous (PPS)\n");
-			break;
-		case passive_parallel_asynchronous:
-			printf("Passive Parallel Asynchronous (PPA)\n");
-			break;
-		case passive_serial_asynchronous:
-			printf("Passive Serial Asynchronous (PSA)\n");
-			break;
-		case altera_jtag_mode:		/* Not used */
-			printf("JTAG Mode\n");
-			break;
-		case fast_passive_parallel:
-			printf("Fast Passive Parallel (FPP)\n");
-			break;
-		case fast_passive_parallel_security:
-			printf
-			    ("Fast Passive Parallel with Security (FPPS) \n");
-			break;
-			/* Add new interface types here */
-		default:
-			printf("Unsupported interface type, %d\n", desc->iface);
-		}
+	printf("Family:        \t");
+	switch (desc->family) {
+	case Altera_ACEX1K:
+		printf("ACEX1K\n");
+		break;
+	case Altera_CYC2:
+		printf("CYCLON II\n");
+		break;
+	case Altera_StratixII:
+		printf("Stratix II\n");
+		break;
+		/* Add new family types here */
+	default:
+		printf("Unknown family type, %d\n", desc->family);
+	}
 
-		printf("Device Size:   \t%zd bytes\n"
-		       "Cookie:        \t0x%x (%d)\n",
-		       desc->size, desc->cookie, desc->cookie);
+	printf("Interface type:\t");
+	switch (desc->iface) {
+	case passive_serial:
+		printf("Passive Serial (PS)\n");
+		break;
+	case passive_parallel_synchronous:
+		printf("Passive Parallel Synchronous (PPS)\n");
+		break;
+	case passive_parallel_asynchronous:
+		printf("Passive Parallel Asynchronous (PPA)\n");
+		break;
+	case passive_serial_asynchronous:
+		printf("Passive Serial Asynchronous (PSA)\n");
+		break;
+	case altera_jtag_mode:		/* Not used */
+		printf("JTAG Mode\n");
+		break;
+	case fast_passive_parallel:
+		printf("Fast Passive Parallel (FPP)\n");
+		break;
+	case fast_passive_parallel_security:
+		printf("Fast Passive Parallel with Security (FPPS)\n");
+		break;
+		/* Add new interface types here */
+	default:
+		printf("Unsupported interface type, %d\n", desc->iface);
+	}
+
+	printf("Device Size:   \t%zd bytes\n"
+	       "Cookie:        \t0x%x (%d)\n",
+	       desc->size, desc->cookie, desc->cookie);
 
-		if (desc->iface_fns) {
-			printf("Device Function Table @ 0x%p\n", desc->iface_fns);
-			switch (desc->family) {
-			case Altera_ACEX1K:
-			case Altera_CYC2:
+	if (desc->iface_fns) {
+		printf("Device Function Table @ 0x%p\n", desc->iface_fns);
+		switch (desc->family) {
+		case Altera_ACEX1K:
+		case Altera_CYC2:
 #if defined(CONFIG_FPGA_ACEX1K)
-				ACEX1K_info(desc);
+			ACEX1K_info(desc);
 #elif defined(CONFIG_FPGA_CYCLON2)
-				CYC2_info(desc);
+			CYC2_info(desc);
 #else
-				/* just in case */
-				printf("%s: No support for ACEX1K devices.\n",
-						__func__);
+			/* just in case */
+			printf("%s: No support for ACEX1K devices.\n",
+					__func__);
 #endif
-				break;
+			break;
 #if defined(CONFIG_FPGA_STRATIX_II)
-			case Altera_StratixII:
-				StratixII_info(desc);
-				break;
+		case Altera_StratixII:
+			StratixII_info(desc);
+			break;
 #endif
-				/* Add new family types here */
-			default:
-				/* we don't need a message here - we give one up above */
-				break;
-			}
-		} else {
-			printf("No Device Function Table.\n");
+			/* Add new family types here */
+		default:
+			/* we don't need a message here - we give one up above */
+			break;
 		}
-
-		ret_val = FPGA_SUCCESS;
 	} else {
-		printf("%s: Invalid device descriptor\n", __func__);
+		printf("No Device Function Table.\n");
 	}
 
+	ret_val = FPGA_SUCCESS;
+
 	return ret_val;
 }