arm: Remove xaeniax board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

10 files changed, 1 insertions, 1123 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4065001..89fe420 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -619,10 +619,6 @@ config TARGET_PALMTREO680
 	select CPU_PXA
 	select SUPPORT_SPL
 
-config TARGET_XAENIAX
-	bool "Support xaeniax"
-	select CPU_PXA
-
 config TARGET_COLIBRI_PXA270
 	bool "Support colibri_pxa270"
 	select CPU_PXA
@@ -783,7 +779,6 @@ source "board/technologic/ts4800/Kconfig"
 source "board/vscom/baltos/Kconfig"
 source "board/woodburn/Kconfig"
 source "board/work-microwave/work_92105/Kconfig"
-source "board/xaeniax/Kconfig"
 
 source "arch/arm/Kconfig.debug"
 
diff --git a/board/xaeniax/Kconfig b/board/xaeniax/Kconfig
deleted file mode 100644
index 519e21f..0000000
--- a/board/xaeniax/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_XAENIAX
-
-config SYS_BOARD
-	default "xaeniax"
-
-config SYS_CONFIG_NAME
-	default "xaeniax"
-
-endif
diff --git a/board/xaeniax/MAINTAINERS b/board/xaeniax/MAINTAINERS
deleted file mode 100644
index 44bb588..0000000
--- a/board/xaeniax/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-XAENIAX BOARD
-#M:	-
-S:	Maintained
-F:	board/xaeniax/
-F:	include/configs/xaeniax.h
-F:	configs/xaeniax_defconfig
diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile
deleted file mode 100644
index e5f116d..0000000
--- a/board/xaeniax/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= xaeniax.o flash.o
diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c
deleted file mode 100644
index 6ad6216..0000000
--- a/board/xaeniax/flash.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)               __swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)               __swab32(x)
-#endif
-
-#define FPW    FLASH_PORT_WIDTH
-#define FPWV   FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			break;
-		case 1:
-			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0] );
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);			/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];			/* device ID        */
-
-	switch (value) {
-
-	case (FPW) INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x02000000;
-		break;				/* => 16 MB     */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int prot, sect;
-	ulong type, start;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer(0);
-
-			*addr = (FPW) 0x00500050;	/* clear status register */
-			*addr = (FPW) 0x00200020;	/* erase setup */
-			*addr = (FPW) 0x00D000D0;	/* erase confirm */
-
-			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
-					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
-					rcode = 1;
-					break;
-				}
-			}
-
-			*addr = 0x00500050;	/* clear status register cmd.   */
-			*addr = 0x00FF00FF;	/* resest to read mode          */
-
-			printf (" done\n");
-		}
-	}
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	disable_interrupts();
-
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c
deleted file mode 100644
index 995c262..0000000
--- a/board/xaeniax/xaeniax.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2004
- * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* arch number of xaeniax */
-	gd->bd->bi_arch_number = 585;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/configs/xaeniax_defconfig b/configs/xaeniax_defconfig
deleted file mode 100644
index 8634cc7..0000000
--- a/configs/xaeniax_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_XAENIAX=y
-# CONFIG_CMD_SETEXPR is not set
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index ade14cd..f31216f 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -499,15 +499,8 @@ again:
 	}
 
 	/* we have a packet address, so tell the card to use it */
-#ifndef CONFIG_XAENIAX
 	SMC_outb (dev, packet_no, PN_REG);
-#else
-	/* On Xaeniax board, we can't use SMC_outb here because that way
-	 * the Allocate MMU command will end up written to the command register
-	 * as well, which will lead to a problem.
-	 */
-	SMC_outl (dev, packet_no << 16, 0);
-#endif
+
 	/* do not write new ptr value if Write data fifo not empty */
 	while ( saved_ptr & PTR_NOTEMPTY )
 		printf ("Write data fifo not empty!\n");
@@ -542,39 +535,19 @@ again:
 	 */
 #ifdef USE_32_BIT
 	SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2);
-#ifndef CONFIG_XAENIAX
 	if (length & 0x2)
 		SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))),
 			  SMC91111_DATA_REG);
 #else
-	/* On XANEIAX, we can only use 32-bit writes, so we need to handle
-	 * unaligned tail part specially. The standard code doesn't work.
-	 */
-	if ((length & 3) == 3) {
-		u16 * ptr = (u16*) &buf[length-3];
-		SMC_outl(dev, (*ptr) | ((0x2000 | buf[length-1]) << 16),
-				SMC91111_DATA_REG);
-	} else if ((length & 2) == 2) {
-		u16 * ptr = (u16*) &buf[length-2];
-		SMC_outl(dev, *ptr, SMC91111_DATA_REG);
-	} else if (length & 1) {
-		SMC_outl(dev, (0x2000 | buf[length-1]), SMC91111_DATA_REG);
-	} else {
-		SMC_outl(dev, 0, SMC91111_DATA_REG);
-	}
-#endif
-#else
 	SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1);
 #endif /* USE_32_BIT */
 
-#ifndef CONFIG_XAENIAX
 	/* Send the last byte, if there is one.	  */
 	if ((length & 1) == 0) {
 		SMC_outw (dev, 0, SMC91111_DATA_REG);
 	} else {
 		SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG);
 	}
-#endif
 
 	/* and let the chipset deal with it */
 	SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG);
@@ -588,9 +561,6 @@ again:
 
 		/* release packet */
 		/* no need to release, MMU does that now */
-#ifdef CONFIG_XAENIAX
-		 SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG);
-#endif
 
 		/* wait for MMU getting ready (low) */
 		while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
@@ -610,9 +580,6 @@ again:
 
 		/* release packet */
 		/* no need to release, MMU does that now */
-#ifdef CONFIG_XAENIAX
-		SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG);
-#endif
 
 		/* wait for MMU getting ready (low) */
 		while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
@@ -625,15 +592,7 @@ again:
 	}
 
 	/* restore previously saved registers */
-#ifndef CONFIG_XAENIAX
 	SMC_outb( dev, saved_pnr, PN_REG );
-#else
-	/* On Xaeniax board, we can't use SMC_outb here because that way
-	 * the Allocate MMU command will end up written to the command register
-	 * as well, which will lead to a problem.
-	 */
-	SMC_outl(dev, saved_pnr << 16, 0);
-#endif
 	SMC_outw( dev, saved_ptr, PTR_REG );
 
 	return length;
@@ -802,15 +761,7 @@ static int smc_rcv(struct eth_device *dev)
 		udelay(1); /* Wait until not busy */
 
 	/* restore saved registers */
-#ifndef CONFIG_XAENIAX
 	SMC_outb( dev, saved_pnr, PN_REG );
-#else
-	/* On Xaeniax board, we can't use SMC_outb here because that way
-	 * the Allocate MMU command will end up written to the command register
-	 * as well, which will lead to a problem.
-	 */
-	SMC_outl( dev, saved_pnr << 16, 0);
-#endif
 	SMC_outw( dev, saved_ptr, PTR_REG );
 
 	if (!is_error) {
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index e19c491..5197f36 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -77,19 +77,6 @@ struct smc91111_priv{
 	if (__p & 2) __v >>= 8; \
 	else __v &= 0xff; \
 	__v; })
-#elif defined(CONFIG_XAENIAX)
-#define SMC_inl(a,r)	(*((volatile dword *)((a)->iobase+(r))))
-#define SMC_inw(a,z)	({ \
-	unsigned int __p = (unsigned int)((a)->iobase + (z)); \
-	unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \
-	if (__p & 3) __v >>= 16; \
-	else __v &= 0xffff; \
-	__v; })
-#define SMC_inb(a,p)	({ \
-	unsigned int ___v = SMC_inw((a),(p) & ~1); \
-	if ((p) & 1) ___v >>= 8; \
-	else ___v &= 0xff; \
-	___v; })
 #else
 #define	SMC_inl(a,r)	(*((volatile dword *)((a)->iobase+(r))))
 #define	SMC_inw(a,r)	(*((volatile word *)((a)->iobase+(r))))
@@ -104,15 +91,6 @@ struct smc91111_priv{
 #ifdef CONFIG_XSENGINE
 #define	SMC_outl(a,d,r)	(*((volatile dword *)((a)->iobase+(r<<1))) = d)
 #define	SMC_outw(a,d,r)	(*((volatile word *)((a)->iobase+(r<<1))) = d)
-#elif defined (CONFIG_XAENIAX)
-#define SMC_outl(a,d,r)	(*((volatile dword *)((a)->iobase+(r))) = d)
-#define SMC_outw(a,d,p)	({ \
-	dword __dwo = SMC_inl((a),(p) & ~3); \
-	dword __dwn = (word)(d); \
-	__dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \
-	__dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \
-	SMC_outl((a), __dwo, (p) & ~3); \
-})
 #else
 #define	SMC_outl(a,d,r)	(*((volatile dword *)((a)->iobase+(r))) = d)
 #define	SMC_outw(a,d,r)	(*((volatile word *)((a)->iobase+(r))) = d)
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
deleted file mode 100644
index 8d19bff..0000000
--- a/include/configs/xaeniax.h
+++ /dev/null
@@ -1,539 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2004
- * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the xaeniax board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_PXA25X		1	/* This is an PXA255 CPU    */
-#define CONFIG_XAENIAX		1	/* on a xaeniax board	    */
-#define	CONFIG_SYS_TEXT_BASE	0x0
-
-#define CONFIG_BOARD_LATE_INIT
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_BTUART	       1       /* we use BTUART on XAENIAX */
-#define CONFIG_CONS_INDEX	4
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_DTT
-
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.68.201
-#define CONFIG_SERVERIP		192.168.68.62
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTCOMMAND	"bootm 0x00100000"
-#define CONFIG_BOOTARGS		"console=ttyS1,115200"
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200			/* speed to run kgdb serial port */
-#endif
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- */
-#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
-#define CONFIG_SYS_HUSH_PARSER		1
-
-#undef CONFIG_SYS_PROMPT
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"u-boot$ "	/* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT		"u-boot=> "	/* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_DEVICE_NULLDEV	1
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
-
-#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks (partition) of DRAM */
-#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE		0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE		0xa0000000
-#define CONFIG_SYS_DRAM_SIZE		0x04000000
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1    /* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* FIXME */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector	*/
-#define CONFIG_ENV_SIZE		0x40000			/* Total Size of Environment Sector	*/
-
-/*
- * SMSC91C111 Network Card
- */
-#define CONFIG_SMC91111		1
-#define CONFIG_SMC91111_BASE		0x10000300  /* chip select 3         */
-#define CONFIG_SMC_USE_32_BIT		1          /* 32 bit bus  */
-#undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
-#undef  CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
-
-/*
- * GPIO settings
- */
-
-/*
- * GP05 == nUSBReset  is 1
- * GP10 == CFReset   is 1
- * GP13 == nCFDataEnable is 1
- * GP14 == nCFAddrEnable is 1
- * GP15 == nCS1      is 1
- * GP21 == ComBrdReset is 1
- * GP24 == SFRM      is 1
- * GP25 == TXD       is 1
- * GP31 == SYNC      is 1
- * GP33 == nCS5      is 1
- * GP39 == FFTXD     is 1
- * GP41 == RTS       is 1
- * GP43 == BTTXD     is 1
- * GP45 == BTRTS     is 1
- * GP47 == TXD       is 1
- * GP48 == nPOE      is 1
- * GP49 == nPWE      is 1
- * GP50 == nPIOR     is 1
- * GP51 == nPIOW     is 1
- * GP52 == nPCE[1]   is 1
- * GP53 == nPCE[2]   is 1
- * GP54 == nPSKTSEL  is 1
- * GP55 == nPREG     is 1
- * GP78 == nCS2      is 1
- * GP79 == nCS3      is 1
- * GP80 == nCS4      is 1
- * GP82 == NSSPSFRM  is 1
- * GP83 == NSSPTXD   is 1
- */
-#define CONFIG_SYS_GPSR0_VAL		0x8320E420
-#define CONFIG_SYS_GPSR1_VAL		0x00FFAA82
-#define CONFIG_SYS_GPSR2_VAL		0x000DC000
-
-/*
- * GP03 == LANReset  is 0
- * GP06 == USBWakeUp  is 0
- * GP11 == USBControl is 0
- * GP12 == Buzzer     is 0
- * GP16 == PWM0       is 0
- * GP17 == PWM1       is 0
- * GP23 == SCLK      is 0
- * GP30 == SDATA_OUT is 0
- * GP81 == NSSPCLK   is 0
- */
-#define CONFIG_SYS_GPCR0_VAL		0x40C31848
-#define CONFIG_SYS_GPCR1_VAL		0x00000000
-#define CONFIG_SYS_GPCR2_VAL		0x00020000
-
-/*
- * GP00 == CPUWakeUpUSB is input
- * GP01 == GP reset is input
- * GP02 == LANInterrupt is input
- * GP03 == LANReset     is output
- * GP04 == USBInterrupt is input
- * GP05 == nUSBReset    is output
- * GP06 == USBWakeUp    is output
- * GP07 == CFReady/nBusy is input
- * GP08 == nCFCardDetect1 is input
- * GP09 == nCFCardDetect2 is input
- * GP10 == nCFReset   is output
- * GP11 == USBControl is output
- * GP12 == Buzzer     is output
- * GP13 == CFDataEnable is output
- * GP14 == CFAddressEnable is output
- * GP15 == nCS1      is output
- * GP16 == PWM0      is output
- * GP17 == PWM1      is output
- * GP18 == RDY       is input
- * GP19 == ReaderReady is input
- * GP20 == ReaderReset is input
- * GP21 == ComBrdReset is output
- * GP23 == SCLK      is output
- * GP24 == SFRM      is output
- * GP25 == TXD       is output
- * GP26 == RXD       is input
- * GP27 == EXTCLK    is input
- * GP28 == BITCLK    is output
- * GP29 == SDATA_IN0 is input
- * GP30 == SDATA_OUT is output
- * GP31 == SYNC      is output
- * GP32 == SYSSCLK   is output
- * GP33 == nCS5      is output
- * GP34 == FFRXD     is input
- * GP35 == CTS       is input
- * GP36 == DCD       is input
- * GP37 == DSR       is input
- * GP38 == RI        is input
- * GP39 == FFTXD     is output
- * GP40 == DTR       is output
- * GP41 == RTS       is output
- * GP42 == BTRXD     is input
- * GP43 == BTTXD     is output
- * GP44 == BTCTS     is input
- * GP45 == BTRTS     is output
- * GP46 == RXD       is input
- * GP47 == TXD       is output
- * GP48 == nPOE      is output
- * GP49 == nPWE      is output
- * GP50 == nPIOR     is output
- * GP51 == nPIOW     is output
- * GP52 == nPCE[1]   is output
- * GP53 == nPCE[2]   is output
- * GP54 == nPSKTSEL  is output
- * GP55 == nPREG     is output
- * GP56 == nPWAIT    is input
- * GP57 == nPIOS16   is input
- * GP58 == LDD[0]    is output
- * GP59 == LDD[1]    is output
- * GP60 == LDD[2]    is output
- * GP61 == LDD[3]    is output
- * GP62 == LDD[4]    is output
- * GP63 == LDD[5]    is output
- * GP64 == LDD[6]    is output
- * GP65 == LDD[7]    is output
- * GP66 == LDD[8]    is output
- * GP67 == LDD[9]    is output
- * GP68 == LDD[10]   is output
- * GP69 == LDD[11]   is output
- * GP70 == LDD[12]   is output
- * GP71 == LDD[13]   is output
- * GP72 == LDD[14]   is output
- * GP73 == LDD[15]   is output
- * GP74 == LCD_FCLK  is output
- * GP75 == LCD_LCLK  is output
- * GP76 == LCD_PCLK  is output
- * GP77 == LCD_ACBIAS is output
- * GP78 == nCS2      is output
- * GP79 == nCS3      is output
- * GP80 == nCS4      is output
- * GP81 == NSSPCLK   is output
- * GP82 == NSSPSFRM  is output
- * GP83 == NSSPTXD   is output
- * GP84 == NSSPRXD   is input
- */
-#define CONFIG_SYS_GPDR0_VAL		0xD3E3FC68
-#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB83
-#define CONFIG_SYS_GPDR2_VAL		0x000FFFFF
-
-/*
- * GP01 == GP reset is AF01
- * GP15 == nCS1     is AF10
- * GP16 == PWM0     is AF10
- * GP17 == PWM1     is AF10
- * GP18 == RDY      is AF01
- * GP23 == SCLK     is AF10
- * GP24 == SFRM     is AF10
- * GP25 == TXD      is AF10
- * GP26 == RXD      is AF01
- * GP27 == EXTCLK   is AF01
- * GP28 == BITCLK   is AF01
- * GP29 == SDATA_IN0 is AF10
- * GP30 == SDATA_OUT is AF01
- * GP31 == SYNC     is AF01
- * GP32 == SYSCLK   is AF01
- * GP33 == nCS5  is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS   is AF01
- * GP36 == DCD   is AF01
- * GP37 == DSR   is AF01
- * GP38 == RI    is AF01
- * GP39 == FFTXD is AF10
- * GP40 == DTR   is AF10
- * GP41 == RTS   is AF10
- * GP42 == BTRXD is AF01
- * GP43 == BTTXD is AF10
- * GP44 == BTCTS is AF01
- * GP45 == BTRTS is AF10
- * GP46 == RXD   is AF10
- * GP47 == TXD   is AF01
- * GP48 == nPOE  is AF10
- * GP49 == nPWE  is AF10
- * GP50 == nPIOR is AF10
- * GP51 == nPIOW is AF10
- * GP52 == nPCE[1] is AF10
- * GP53 == nPCE[2] is AF10
- * GP54 == nPSKTSEL is AF10
- * GP55 == nPREG   is AF10
- * GP56 == nPWAIT  is AF01
- * GP57 == nPIOS16 is AF01
- * GP58 == LDD[0]  is AF10
- * GP59 == LDD[1]  is AF10
- * GP60 == LDD[2]  is AF10
- * GP61 == LDD[3]  is AF10
- * GP62 == LDD[4]  is AF10
- * GP63 == LDD[5]  is AF10
- * GP64 == LDD[6]  is AF10
- * GP65 == LDD[7]  is AF10
- * GP66 == LDD[8]  is AF10
- * GP67 == LDD[9]  is AF10
- * GP68 == LDD[10] is AF10
- * GP69 == LDD[11] is AF10
- * GP70 == LDD[12] is AF10
- * GP71 == LDD[13] is AF10
- * GP72 == LDD[14] is AF10
- * GP73 == LDD[15] is AF10
- * GP74 == LCD_FCLK is AF10
- * GP75 == LCD_LCLK is AF10
- * GP76 == LCD_PCLK is AF10
- * GP77 == LCD_ACBIAS is AF10
- * GP78 == nCS2     is AF10
- * GP79 == nCS3     is AF10
- * GP80 == nCS4     is AF10
- * GP81 == NSSPCLK  is AF01
- * GP82 == NSSPSFRM is AF01
- * GP83 == NSSPTXD  is AF01
- * GP84 == NSSPRXD  is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL		0x80000004
-#define CONFIG_SYS_GAFR0_U_VAL		0x595A801A
-#define CONFIG_SYS_GAFR1_L_VAL		0x699A9559
-#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL		0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL		0x00000256
-
-/*
- * clock settings
- */
-/* RDH = 1
- * PH  = 0
- * VFS = 0
- * BFS = 0
- * SSS = 0
- */
-#define CONFIG_SYS_PSSR_VAL		0x00000030
-
-#define CONFIG_SYS_CKEN			0x00000080  /*  */
-#define CONFIG_SYS_ICMR			0x00000000  /* No interrupts enabled        */
-#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
-
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1 :
- * [31]    0    -
- * [30:28] 000  -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19]    0    -
- * [18:16] 000  -
- * configuration for nCS0:
- * [15]    0    - Slower Device
- * [14:12] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns
- * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?)
- * [03]    0    - 32 Bit bus width
- * [02:00] 010  - burst OF 4 ROM or FLASH
-*/
-#define CONFIG_SYS_MSC0_VAL		0x000023D2
-
-/* This is the configuration for nCS2/3 -> USB controller, LAN
- * configuration for nCS3: LAN
- * [31]    0    - Slower Device
- * [30:28] 001  - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns
- * [19]    0    - 32 Bit bus width
- * [18:16] 100  - variable latency I/O
- * configuration for nCS2: USB
- * [15]    1    - Faster Device
- * [14:12] 010  - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03]    1    - 16 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL		0x1224A26C
-
-/* This is the configuration for nCS4/5 -> LAN
- * configuration for nCS5:
- * [31]    0    -
- * [30:28] 000  -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19]    0    -
- * [18:16] 000  -
- * configuration for nCS4: LAN
- * [15]    1    - Faster Device
- * [14:12] 010  - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03]    0    - 32 Bit bus width
- * [02:00] 100  - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL		0x00001224
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29]   000 - reserved
- * [28]      0	 - no SA1111 compatiblity mode
- * [27]      0   - latch return data with return clock
- * [26]      0   - alternate addressing for pair 2/3
- * [25:24]   00  - timings
- * [23]      0   - internal banks in lower partition 2/3 (not used)
- * [22:21]   00  - row address bits for partition 2/3 (not used)
- * [20:19]   00  - column address bits for partition 2/3 (not used)
- * [18]      0   - SDRAM partition 2/3 width is 32 bit
- * [17]      0   - SDRAM partition 3 disabled
- * [16]      0   - SDRAM partition 2 disabled
- * [15:13]   000 - reserved
- * [12]      0	 - no SA1111 compatiblity mode
- * [11]      1   - latch return data with return clock
- * [10]      0   - no alternate addressing for pair 0/1
- * [09:08]   10  - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7]       1   - 4 internal banks in lower partition pair
- * [06:05]   10  - 13 row address bits for partition 0/1
- * [04:03]   01  - 9 column address bits for partition 0/1
- * [02]      0   - SDRAM partition 0/1 width is 32 bit
- * [01]      0   - disable SDRAM partition 1
- * [00]      1   - enable  SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL		0x00000AC9
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0     - reserved
- * [25]    0     - K2FREE: not free running
- * [24]    0     - K1FREE: not free running
- * [23]    0     - K0FREE: not free running
- * [22]    0     - SLFRSH: self refresh disabled
- * [21]    0     - reserved
- * [20]    1     - APD: auto power down
- * [19]    0     - K2DB2: SDCLK2 is MemClk
- * [18]    0     - K2RUN: disable SDCLK2
- * [17]    0     - K1DB2: SDCLK1 is MemClk
- * [16]    1     - K1RUN: enable SDCLK1
- * [15]    1     - E1PIN: SDRAM clock enable
- * [14]    0     - K0DB2: SDCLK0 is MemClk
- * [13]    0     - K0RUN: disable SDCLK0
- * [12]    0     - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL		0x00138018 /* mh: was 0x00118018 */
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31]      0       - reserved
- * [30:23]   00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20]   011     - MDCL2:  SDRAM2/3 Cas Latency.  (not used)
- * [19]      0       - MDADD2: SDRAM2/3 burst Type. Fixed to sequential.  (not used)
- * [18:16]   010     - MDBL2:  SDRAM2/3 burst Length. Fixed to 4.  (not used)
- * [15]      0       - reserved
- * [14:07]   00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04]   011     - MDCL0:  SDRAM0/1 Cas Latency.
- * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL		0x00320032
-
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00010504
-#define CONFIG_SYS_MCMEM1_VAL		0x00010504
-#define CONFIG_SYS_MCATT0_VAL		0x00010504
-#define CONFIG_SYS_MCATT1_VAL		0x00010504
-#define CONFIG_SYS_MCIO0_VAL		0x00004715
-#define CONFIG_SYS_MCIO1_VAL		0x00004715
-
-
-#endif	/* __CONFIG_H */