Commit f8cc69e5 by Nicolin Chen Committed by Nitin Garg

ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode

There is one design rule according to SAI's reference manual: If the transmitter bit clock and frame sync are to be used by both transmitter and receiver, the transmitter must be configured for asynchronous operation and the receiver for synchronous operation. And SYNC of TCR2 is a 2-width control bit: 00 Asynchronous mode. 01 Synchronous with receiver. 10 Synchronous with another SAI transmitter. 11 Synchronous with another SAI receiver. So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC bit of RCR2 to 0x1 (Synchronous with transmitter). Signed-off-by: 's avatarNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: 's avatarMark Brown <broonie@linaro.org> (cherry picked from commit af96ff5b)
parent e4c010ad
......@@ -333,8 +333,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
* The transmitter bit clock and frame sync are to be
* used by both the transmitter and receiver.
*/
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
~FSL_SAI_CR2_SYNC);
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
FSL_SAI_CR2_SYNC);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment