Commit 855675f6 by Nicolin Chen Committed by Mark Brown

ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode

There is one design rule according to SAI's reference manual: If the transmitter bit clock and frame sync are to be used by both transmitter and receiver, the transmitter must be configured for asynchronous operation and the receiver for synchronous operation. And SYNC of TCR2 is a 2-width control bit: 00 Asynchronous mode. 01 Synchronous with receiver. 10 Synchronous with another SAI transmitter. 11 Synchronous with another SAI receiver. So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC bit of RCR2 to 0x1 (Synchronous with transmitter). Signed-off-by: 's avatarNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: 's avatarMark Brown <broonie@linaro.org>
parent ce7344a4
......@@ -334,8 +334,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
* Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
* Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
*/
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment