Browse Source

Fix misspellings of "system", "controller", "interrupt" and "necessary".

Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
imx_3.10.17_1.0.0_ga
Robert P. J. Day 13 years ago
committed by Adrian Bunk
parent
commit
3a4fa0a25d
89 changed files with 117 additions and 117 deletions
  1. +1
    -1
      Documentation/filesystems/Locking
  2. +1
    -1
      Documentation/mips/AU1xxx_IDE.README
  3. +1
    -1
      arch/arm/mach-at91/gpio.c
  4. +1
    -1
      arch/arm/mach-s3c2410/clock.c
  5. +1
    -1
      arch/arm/mach-s3c2412/clock.c
  6. +1
    -1
      arch/arm/mach-s3c2443/clock.c
  7. +1
    -1
      arch/cris/arch-v10/drivers/pcf8563.c
  8. +1
    -1
      arch/cris/arch-v32/drivers/pcf8563.c
  9. +1
    -1
      arch/h8300/kernel/irq.c
  10. +1
    -1
      arch/m68knommu/platform/5307/pit.c
  11. +1
    -1
      arch/mips/kernel/module.c
  12. +1
    -1
      arch/mips/pci/pci-excite.c
  13. +1
    -1
      arch/mips/sni/pcimt.c
  14. +1
    -1
      arch/powerpc/platforms/celleb/scc_uhc.c
  15. +1
    -1
      arch/sh64/kernel/pci_sh5.c
  16. +1
    -1
      arch/x86/kernel/suspend_64.c
  17. +1
    -1
      drivers/ata/ahci.c
  18. +1
    -1
      drivers/ata/libata-sff.c
  19. +1
    -1
      drivers/ata/pata_cs5530.c
  20. +1
    -1
      drivers/ata/pata_cs5535.c
  21. +2
    -2
      drivers/ata/pata_it821x.c
  22. +1
    -1
      drivers/ata/pata_mpiix.c
  23. +1
    -1
      drivers/ata/pata_ns87410.c
  24. +1
    -1
      drivers/ata/pata_oldpiix.c
  25. +1
    -1
      drivers/ata/pata_radisys.c
  26. +1
    -1
      drivers/ata/pata_sc1200.c
  27. +1
    -1
      drivers/ata/pata_sil680.c
  28. +1
    -1
      drivers/ata/pata_via.c
  29. +1
    -1
      drivers/atm/firestream.c
  30. +1
    -1
      drivers/block/rd.c
  31. +2
    -2
      drivers/char/n_tty.c
  32. +1
    -1
      drivers/char/rocket.c
  33. +4
    -4
      drivers/char/tty_io.c
  34. +1
    -1
      drivers/char/tty_ioctl.c
  35. +1
    -1
      drivers/ide/ide-tape.c
  36. +2
    -2
      drivers/ide/pci/it821x.c
  37. +1
    -1
      drivers/ide/pci/siimage.c
  38. +1
    -1
      drivers/md/dm-crypt.c
  39. +1
    -1
      drivers/media/dvb/bt8xx/bt878.c
  40. +1
    -1
      drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
  41. +11
    -11
      drivers/media/video/bt8xx/bttv-cards.c
  42. +1
    -1
      drivers/media/video/em28xx/em28xx-video.c
  43. +1
    -1
      drivers/misc/sony-laptop.c
  44. +1
    -1
      drivers/net/amd8111e.c
  45. +1
    -1
      drivers/net/au1000_eth.c
  46. +1
    -1
      drivers/net/bonding/bond_sysfs.c
  47. +1
    -1
      drivers/net/e100.c
  48. +1
    -1
      drivers/net/irda/donauboe.c
  49. +1
    -1
      drivers/net/smc911x.c
  50. +1
    -1
      drivers/net/spider_net.c
  51. +2
    -2
      drivers/net/tc35815.c
  52. +1
    -1
      drivers/net/via-velocity.c
  53. +1
    -1
      drivers/s390/block/dasd_3990_erp.c
  54. +1
    -1
      drivers/s390/char/sclp_cpi.c
  55. +1
    -1
      drivers/scsi/aacraid/aacraid.h
  56. +1
    -1
      drivers/scsi/aic7xxx/cam.h
  57. +3
    -3
      drivers/scsi/dc395x.c
  58. +1
    -1
      drivers/scsi/megaraid/megaraid_mbox.c
  59. +1
    -1
      drivers/scsi/qla4xxx/ql4_init.c
  60. +1
    -1
      drivers/scsi/sd.c
  61. +1
    -1
      drivers/spi/mpc52xx_psc_spi.c
  62. +1
    -1
      drivers/usb/host/ehci-hub.c
  63. +1
    -1
      drivers/usb/host/sl811-hcd.c
  64. +1
    -1
      fs/jfs/jfs_dtree.c
  65. +1
    -1
      fs/ocfs2/dcache.c
  66. +1
    -1
      fs/reiserfs/super.c
  67. +2
    -2
      fs/super.c
  68. +1
    -1
      include/asm-arm/dma-mapping.h
  69. +1
    -1
      include/asm-mips/pci/bridge.h
  70. +1
    -1
      include/asm-sh/se7751.h
  71. +1
    -1
      include/asm-sh/systemh7751.h
  72. +1
    -1
      include/linux/ipmi_smi.h
  73. +1
    -1
      kernel/hrtimer.c
  74. +2
    -2
      kernel/sched.c
  75. +1
    -1
      kernel/taskstats.c
  76. +1
    -1
      lib/kobject_uevent.c
  77. +1
    -1
      net/irda/discovery.c
  78. +1
    -1
      net/iucv/iucv.c
  79. +1
    -1
      net/netfilter/xt_CONNMARK.c
  80. +1
    -1
      net/netfilter/xt_connmark.c
  81. +1
    -1
      net/sched/em_meta.c
  82. +4
    -4
      sound/core/seq/seq_midi_emul.c
  83. +1
    -1
      sound/drivers/opl3/opl3_midi.c
  84. +2
    -2
      sound/isa/es18xx.c
  85. +4
    -4
      sound/mips/au1x00.c
  86. +1
    -1
      sound/pci/au88x0/au88x0.c
  87. +1
    -1
      sound/soc/soc-core.c
  88. +1
    -1
      sound/soc/soc-dapm.c
  89. +1
    -1
      sound/synth/emux/emux_synth.c

+ 1
- 1
Documentation/filesystems/Locking View File

@ -224,7 +224,7 @@ against the page the filesystem should redirty the page with
redirty_page_for_writepage(), then unlock the page and return zero.
This may also be done to avoid internal deadlocks, but rarely.
If the filesytem is called for sync then it must wait on any
If the filesystem is called for sync then it must wait on any
in-progress I/O and then start new I/O.
The filesystem should unlock the page synchronously, before returning to the


+ 1
- 1
Documentation/mips/AU1xxx_IDE.README View File

@ -59,7 +59,7 @@ Four configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
controler
controller
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
per descriptor


+ 1
- 1
arch/arm/mach-at91/gpio.c View File

@ -439,7 +439,7 @@ void __init at91_gpio_irq_setup(void)
for (i = 0; i < 32; i++, pin++) {
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interupts sanely.
* shorter, and the AIC handles interrupts sanely.
*/
set_irq_chip(pin, &gpio_irqchip);
set_irq_handler(pin, handle_simple_irq);


+ 1
- 1
arch/arm/mach-s3c2410/clock.c View File

@ -238,7 +238,7 @@ int __init s3c2410_baseclk_add(void)
}
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsytems such as the LCD which do
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*


+ 1
- 1
arch/arm/mach-s3c2412/clock.c View File

@ -689,7 +689,7 @@ int __init s3c2412_baseclk_add(void)
}
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsytems such as the LCD which do
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*


+ 1
- 1
arch/arm/mach-s3c2443/clock.c View File

@ -1005,7 +1005,7 @@ void __init s3c2443_init_clocks(int xtal)
}
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsytems such as the LCD which do
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*


+ 1
- 1
arch/cris/arch-v10/drivers/pcf8563.c View File

@ -4,7 +4,7 @@
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
* consumption. A programmable clock output, interupt output and voltage
* consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented


+ 1
- 1
arch/cris/arch-v32/drivers/pcf8563.c View File

@ -4,7 +4,7 @@
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
* consumption. A programmable clock output, interupt output and voltage
* consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented


+ 1
- 1
arch/h8300/kernel/irq.c View File

@ -68,7 +68,7 @@ static void h8300_shutdown_irq(unsigned int irq)
}
/*
* h8300 interrupt controler implementation
* h8300 interrupt controller implementation
*/
struct irq_chip h8300irq_chip = {
.name = "H8300-INTC",


+ 1
- 1
arch/m68knommu/platform/5307/pit.c View File

@ -83,7 +83,7 @@ unsigned long coldfire_pit_offset(void)
/*
* If we are still in the first half of the upcount and a
* timer interupt is pending, then add on a ticks worth of time.
* timer interrupt is pending, then add on a ticks worth of time.
*/
offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr;
if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT))


+ 1
- 1
arch/mips/kernel/module.c View File

@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr)
return e;
}
/* Put in dbe list if neccessary. */
/* Put in dbe list if necessary. */
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)


+ 1
- 1
arch/mips/pci/pci-excite.c View File

@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void)
ocd_writel(0x00000000, bar + 0x100);
}
/* Finally, enable the PCI interupt */
/* Finally, enable the PCI interrupt */
#if USB_IRQ > 7
set_c0_intcontrol(1 << USB_IRQ);
#else


+ 1
- 1
arch/mips/sni/pcimt.c View File

@ -246,7 +246,7 @@ static void pcimt_hwint1(void)
/*
* Note: ASIC PCI's builtin interrupt achknowledge feature is
* broken. Using it may result in loss of some or all i8259
* interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
* interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
*/
irq = i8259_irq();
if (unlikely(irq < 0))


+ 1
- 1
arch/powerpc/platforms/celleb/scc_uhc.c View File

@ -36,7 +36,7 @@ static inline int uhc_clkctrl_ready(u32 val)
}
/*
* UHC(usb host controler) enable function.
* UHC(usb host controller) enable function.
* affect to both of OHCI and EHCI core module.
*/
static void enable_scc_uhc(struct pci_dev *dev)


+ 1
- 1
arch/sh64/kernel/pci_sh5.c View File

@ -480,7 +480,7 @@ static int __init pcibios_init(void)
return -EINVAL;
}
/* The pci subsytem needs to know where memory is and how much
/* The pci subsystem needs to know where memory is and how much
* of it there is. I've simply made these globals. A better mechanism
* is probably needed.
*/


+ 1
- 1
arch/x86/kernel/suspend_64.c View File

@ -123,7 +123,7 @@ void fix_processor_context(void)
int cpu = smp_processor_id();
struct tss_struct *t = &per_cpu(init_tss, cpu);
set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9;


+ 1
- 1
drivers/ata/ahci.c View File

@ -1479,7 +1479,7 @@ static void ahci_port_intr(struct ata_port *ap)
return;
}
/* hmmm... a spurious interupt */
/* hmmm... a spurious interrupt */
/* if !NCQ, ignore. No modern ATA device has broken HSM
* implementation for non-NCQ commands.


+ 1
- 1
drivers/ata/libata-sff.c View File

@ -856,7 +856,7 @@ err_out:
* @pdev: PCI device
*
* Some PCI ATA devices report simplex mode but in fact can be told to
* enter non simplex mode. This implements the neccessary logic to
* enter non simplex mode. This implements the necessary logic to
* perform the task on such devices. Calling it on other devices will
* have -undefined- behaviour.
*/


+ 1
- 1
drivers/ata/pata_cs5530.c View File

@ -138,7 +138,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary. Specifically we have a problem that there is only
* necessary. Specifically we have a problem that there is only
* one MWDMA/UDMA bit.
*/


+ 1
- 1
drivers/ata/pata_cs5535.c View File

@ -25,7 +25,7 @@
* Documentation:
* Available from AMD web site.
* TODO
* Review errata to see if serializing is neccessary
* Review errata to see if serializing is necessary
*/
#include <linux/kernel.h>


+ 2
- 2
drivers/ata/pata_it821x.c View File

@ -105,7 +105,7 @@ struct it821x_dev
/*
* We allow users to force the card into non raid mode without
* flashing the alternative BIOS. This is also neccessary right now
* flashing the alternative BIOS. This is also necessary right now
* for embedded platforms that cannot run a PC BIOS but are using this
* device.
*/
@ -383,7 +383,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc)
* @ap: ATA port
* @device: Device number (not pointer)
*
* Device selection hook. If neccessary perform clock switching
* Device selection hook. If necessary perform clock switching
*/
static void it821x_passthru_dev_select(struct ata_port *ap,


+ 1
- 1
drivers/ata/pata_mpiix.c View File

@ -129,7 +129,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
* necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/


+ 1
- 1
drivers/ata/pata_ns87410.c View File

@ -124,7 +124,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary.
* necessary.
*/
static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)


+ 1
- 1
drivers/ata/pata_oldpiix.c View File

@ -200,7 +200,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
* necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/


+ 1
- 1
drivers/ata/pata_radisys.c View File

@ -161,7 +161,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
* necessary. Our logic also clears TIME0/TIME1 for the other device so
* that, even if we get this wrong, cycles to the other device will
* be made PIO0.
*/


+ 1
- 1
drivers/ata/pata_sc1200.c View File

@ -156,7 +156,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* neccessary. Specifically we have a problem that there is only
* necessary. Specifically we have a problem that there is only
* one MWDMA/UDMA bit.
*/


+ 1
- 1
drivers/ata/pata_sil680.c View File

@ -16,7 +16,7 @@
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
* if neccessary
* if necessary
*
* TODO
* If we know all our devices are LBA28 (or LBA28 sized) we could use


+ 1
- 1
drivers/ata/pata_via.c View File

@ -420,7 +420,7 @@ static struct ata_port_operations via_port_ops_noirq = {
* @pdev: PCI device
* @flags: configuration flags
*
* Set the FIFO properties for this device if neccessary. Used both on
* Set the FIFO properties for this device if necessary. Used both on
* set up and on and the resume path
*/


+ 1
- 1
drivers/atm/firestream.c View File

@ -1596,7 +1596,7 @@ static irqreturn_t fs_irq (int irq, void *dev_id)
/* print the bits in the ISR register. */
if (fs_debug & FS_DEBUG_IRQ) {
/* The FS_DEBUG things are unneccesary here. But this way it is
/* The FS_DEBUG things are unnecessary here. But this way it is
clear for grep that these are debug prints. */
fs_dprintk (FS_DEBUG_IRQ, "IRQ status:");
for (i=0;i<27;i++)


+ 1
- 1
drivers/block/rd.c View File

@ -365,7 +365,7 @@ static int rd_open(struct inode *inode, struct file *filp)
/*
* Deep badness. rd_blkdev_pagecache_IO() needs to allocate
* pagecache pages within a request_fn. We cannot recur back
* into the filesytem which is mounted atop the ramdisk, because
* into the filesystem which is mounted atop the ramdisk, because
* that would deadlock on fs locks. And we really don't want
* to reenter rd_blkdev_pagecache_IO when we're already within
* that function.


+ 2
- 2
drivers/char/n_tty.c View File

@ -437,7 +437,7 @@ static inline void finish_erasing(struct tty_struct *tty)
* @c: character input
* @tty: terminal device
*
* Perform erase and neccessary output when an erase character is
* Perform erase and necessary output when an erase character is
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
*/
@ -657,7 +657,7 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
* @c: character
*
* Process a parity error and queue the right data to indicate
* the error case if neccessary. Locking as per n_tty_receive_buf.
* the error case if necessary. Locking as per n_tty_receive_buf.
*/
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)


+ 1
- 1
drivers/char/rocket.c View File

@ -563,7 +563,7 @@ static void rp_do_poll(unsigned long dummy)
/* Get a ptr to the board's control struct */
ctlp = sCtlNumToCtlPtr(ctrl);
/* Get the interupt status from the board */
/* Get the interrupt status from the board */
#ifdef CONFIG_PCI
if (ctlp->BusType == isPCI)
CtlMask = sPCIGetControllerIntStatus(ctlp);


+ 4
- 4
drivers/char/tty_io.c View File

@ -943,7 +943,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_deref);
* @tty: terminal to activate ldisc on
*
* Set the TTY_LDISC flag when the line discipline can be called
* again. Do neccessary wakeups for existing sleepers.
* again. Do necessary wakeups for existing sleepers.
*
* Note: nobody should set this bit except via this function. Clearing
* directly is allowed.
@ -1504,7 +1504,7 @@ EXPORT_SYMBOL(tty_hangup);
*
* The user has asked via system call for the terminal to be hung up.
* We do this synchronously so that when the syscall returns the process
* is complete. That guarantee is neccessary for security reasons.
* is complete. That guarantee is necessary for security reasons.
*/
void tty_vhangup(struct tty_struct * tty)
@ -1691,7 +1691,7 @@ EXPORT_SYMBOL(stop_tty);
* @tty: tty to start
*
* Start a tty that has been stopped if at all possible. Perform
* any neccessary wakeups and propagate the TIOCPKT status. If this
* any necessary wakeups and propagate the TIOCPKT status. If this
* is the tty was previous stopped and is being started then the
* driver start method is invoked and the line discipline woken.
*
@ -2877,7 +2877,7 @@ static int tty_fasync(int fd, struct file * filp, int on)
* @tty: tty to fake input into
* @p: pointer to character
*
* Fake input to a tty device. Does the neccessary locking and
* Fake input to a tty device. Does the necessary locking and
* input management.
*
* FIXME: does not honour flow control ??


+ 1
- 1
drivers/char/tty_ioctl.c View File

@ -444,7 +444,7 @@ static void change_termios(struct tty_struct * tty, struct ktermios * new_termio
* @arg: user data
* @opt: option information
*
* Helper function to prepare termios data and run neccessary other
* Helper function to prepare termios data and run necessary other
* functions before using change_termios to do the actual changes.
*
* Locking:


+ 1
- 1
drivers/ide/ide-tape.c View File

@ -565,7 +565,7 @@ typedef struct os_dat_s {
* The following parameter is used to select the point in the internal
* tape fifo in which we will start to refill the buffer. Decreasing
* the following parameter will improve the system's latency and
* interactive response, while using a high value might improve sytem
* interactive response, while using a high value might improve system
* throughput.
*/
#define IDETAPE_FIFO_THRESHOLD 2


+ 2
- 2
drivers/ide/pci/it821x.c View File

@ -95,7 +95,7 @@ struct it821x_dev
/*
* We allow users to force the card into non raid mode without
* flashing the alternative BIOS. This is also neccessary right now
* flashing the alternative BIOS. This is also necessary right now
* for embedded platforms that cannot run a PC BIOS but are using this
* device.
*/
@ -564,7 +564,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
/*
* Not in the docs but according to the reference driver
* this is neccessary.
* this is necessary.
*/
pci_read_config_byte(hwif->pci_dev, 0x08, &conf);


+ 1
- 1
drivers/ide/pci/siimage.c View File

@ -26,7 +26,7 @@
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
* if neccessary
* if necessary
*
* The Dell DRAC4 has some interesting features including effectively hot
* unplugging/replugging the virtual CD interface when the DRAC is reset.


+ 1
- 1
drivers/md/dm-crypt.c View File

@ -112,7 +112,7 @@ static void clone_init(struct dm_crypt_io *, struct bio *);
* Different IV generation algorithms:
*
* plain: the initial vector is the 32-bit little-endian version of the sector
* number, padded with zeros if neccessary.
* number, padded with zeros if necessary.
*
* essiv: "encrypted sector|salt initial vector", the sector number is
* encrypted with the bulk cipher using a salt as key. The salt


+ 1
- 1
drivers/media/dvb/bt8xx/bt878.c View File

@ -280,7 +280,7 @@ static irqreturn_t bt878_irq(int irq, void *dev_id)
if (!(astat = (stat & mask)))
return IRQ_NONE; /* this interrupt is not for me */
/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
btwrite(astat, BT878_AINT_STAT); /* try to clear interupt condition */
btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */
if (astat & (BT878_ASCERR | BT878_AOCERR)) {


+ 1
- 1
drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c View File

@ -128,7 +128,7 @@ struct ttusb {
struct dvb_frontend* fe;
};
/* ugly workaround ... don't know why it's neccessary to read */
/* ugly workaround ... don't know why it's necessary to read */
/* all result codes. */
#define DEBUG 0


+ 11
- 11
drivers/media/video/bt8xx/bttv-cards.c View File

@ -4709,18 +4709,18 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
* GPIO[8] - - P3[5] (microcontroler)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
* GPINTR - - P3[4] (microcontroler)
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
* GPIO[8] - - P3[5] (microcontroller)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
* GPINTR - - P3[4] (microcontroller)
*
* The microcontroler is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroler
* The microcontroller is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroller
* which is also wired to I2C interface. I have no further info on the
* microcontroler features, one would need to disassembly the firmware.
* microcontroller features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
@ -4788,7 +4788,7 @@ static void tibetCS16_init(struct bttv *btv)
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
* logic on the board uses logical numbers for the 4 controlers, but
* logic on the board uses logical numbers for the 4 controllers, but
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence


+ 1
- 1
drivers/media/video/em28xx/em28xx-video.c View File

@ -907,7 +907,7 @@ static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_form
/* stop io in case it is already in progress */
if (dev->stream == STREAM_ON) {
em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n");
em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n");
if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}


+ 1
- 1
drivers/misc/sony-laptop.c View File

@ -277,7 +277,7 @@ static void do_sony_laptop_release_key(struct work_struct *work)
static DECLARE_WORK(sony_laptop_release_key_work,
do_sony_laptop_release_key);
/* forward event to the input subsytem */
/* forward event to the input subsystem */
static void sony_laptop_report_input_event(u8 event)
{
struct input_dev *jog_dev = sony_laptop_input.jog_dev;


+ 1
- 1
drivers/net/amd8111e.c View File

@ -1111,7 +1111,7 @@ static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
return new_stats;
}
/* This function recalculate the interupt coalescing mode on every interrupt
/* This function recalculate the interrupt coalescing mode on every interrupt
according to the datarate and the packet rate.
*/
static int amd8111e_calc_coalesce(struct net_device *dev)


+ 1
- 1
drivers/net/au1000_eth.c View File

@ -542,7 +542,7 @@ static struct {
static int num_ifs;
/*
* Setup the base address and interupt of the Au1xxx ethernet macs
* Setup the base address and interrupt of the Au1xxx ethernet macs
* based on cpu type and whether the interface is enabled in sys_pinfunc
* register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
*/


+ 1
- 1
drivers/net/bonding/bond_sysfs.c View File

@ -55,7 +55,7 @@ static int expected_refcount = -1;
static struct class *netdev_class;
/*--------------------------- Data Structures -----------------------------*/
/* Bonding sysfs lock. Why can't we just use the subsytem lock?
/* Bonding sysfs lock. Why can't we just use the subsystem lock?
* Because kobject_register tries to acquire the subsystem lock. If
* we already hold the lock (which we would if the user was creating
* a new bond through the sysfs interface), we deadlock.


+ 1
- 1
drivers/net/e100.c View File

@ -1324,7 +1324,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
if (!--counter) break;
}
/* ack any interupts, something could have been set */
/* ack any interrupts, something could have been set */
iowrite8(~0, &nic->csr->scb.stat_ack);
/* if the command failed, or is not OK, notify and return */


+ 1
- 1
drivers/net/irda/donauboe.c View File

@ -595,7 +595,7 @@ toshoboe_startchip (struct toshoboe_cb *self)
OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1);
OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2);
/*Enable DMA controler in byte mode and RX */
/*Enable DMA controller in byte mode and RX */
OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
/* Start up the clocks */


+ 1
- 1
drivers/net/smc911x.c View File

@ -1223,7 +1223,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
}
#endif
/* Handle PHY interupt condition */
/* Handle PHY interrupt condition */
if (status & INT_STS_PHY_INT_) {
DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
smc911x_phy_interrupt(dev);


+ 1
- 1
drivers/net/spider_net.c View File

@ -1639,7 +1639,7 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
/**
* spider_net_interrupt - interrupt handler for spider_net
* @irq: interupt number
* @irq: interrupt number
* @ptr: pointer to net_device
* @regs: PU registers
*


+ 2
- 2
drivers/net/tc35815.c View File

@ -1654,7 +1654,7 @@ tc35815_rx(struct net_device *dev)
panic_queues(dev);
}
#endif
/* pass BD to controler */
/* pass BD to controller */
#ifndef TC35815_USE_PACKEDBUFFER
if (!lp->rx_skbs[curid].skb) {
lp->rx_skbs[curid].skb =
@ -1694,7 +1694,7 @@ tc35815_rx(struct net_device *dev)
}
#endif
for (i = 0; i < (bd_count + 1) / 2 + 1; i++) {
/* pass FD to controler */
/* pass FD to controller */
#ifdef DEBUG
lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead);
#else


+ 1
- 1
drivers/net/via-velocity.c View File

@ -1648,7 +1648,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
*
* Scan the queues looking for transmitted packets that
* we can complete and clean up. Update any statistics as
* neccessary/
* necessary/
*/
static int velocity_tx_srv(struct velocity_info *vptr, u32 status)


+ 1
- 1
drivers/s390/block/dasd_3990_erp.c View File

@ -2001,7 +2001,7 @@ dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
switch (sense[28]) {
case 0x17:
/* issue a Diagnostic Control command with an
* Inhibit Write subcommand and controler modifier */
* Inhibit Write subcommand and controller modifier */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;


+ 1
- 1
drivers/s390/char/sclp_cpi.c View File

@ -157,7 +157,7 @@ cpi_prepare_req(void)
sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
/* set sytem level */
/* set system level */
evb->system_level = LINUX_VERSION_CODE;
/* set sysplex name */


+ 1
- 1
drivers/scsi/aacraid/aacraid.h View File

@ -1526,7 +1526,7 @@ struct aac_mntent {
__le32 capacityhigh;
};
#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */
#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */
#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */


+ 1
- 1
drivers/scsi/aic7xxx/cam.h View File

@ -48,7 +48,7 @@ typedef enum {
CAM_REQ_ABORTED, /* CCB request aborted by the host */
CAM_UA_ABORT, /* Unable to abort CCB request */
CAM_REQ_CMP_ERR, /* CCB request completed with an error */
CAM_BUSY, /* CAM subsytem is busy */
CAM_BUSY, /* CAM subsystem is busy */
CAM_REQ_INVALID, /* CCB request was invalid */
CAM_PATH_INVALID, /* Supplied Path ID is invalid */
CAM_SEL_TIMEOUT, /* Target Selection Timeout */


+ 3
- 3
drivers/scsi/dc395x.c View File

@ -1808,12 +1808,12 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
irqreturn_t handled = IRQ_NONE;
/*
* Check for pending interupt
* Check for pending interrupt
*/
scsi_status = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
if (scsi_status & SCSIINTERRUPT) {
/* interupt pending - let's process it! */
/* interrupt pending - let's process it! */
dc395x_handle_interrupt(acb, scsi_status);
handled = IRQ_HANDLED;
}
@ -4579,7 +4579,7 @@ static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
if (acb->config & HCC_SCSI_RESET)
reset_scsi_bus(acb);
/* clear any pending interupt state */
/* clear any pending interrupt state */
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
}


+ 1
- 1
drivers/scsi/megaraid/megaraid_mbox.c View File

@ -427,7 +427,7 @@ megaraid_exit(void)
* @id : pci device id of the class of controllers
*
* This routine should be called whenever a new adapter is detected by the
* PCI hotplug susbsytem.
* PCI hotplug susbsystem.
*/
static int __devinit
megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)


+ 1
- 1
drivers/scsi/qla4xxx/ql4_init.c View File

@ -1006,7 +1006,7 @@ int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a)
* qla4xxx_start_firmware - starts qla4xxx firmware
* @ha: Pointer to host adapter structure.
*
* This routine performs the neccessary steps to start the firmware for
* This routine performs the necessary steps to start the firmware for
* the QLA4010 adapter.
**/
static int qla4xxx_start_firmware(struct scsi_qla_host *ha)


+ 1
- 1
drivers/scsi/sd.c View File

@ -676,7 +676,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
* success as well). Returns a negated errno value in case of error.
*
* Note: most ioctls are forward onto the block subsystem or further
* down in the scsi subsytem.
* down in the scsi subsystem.
**/
static int sd_ioctl(struct inode * inode, struct file * filp,
unsigned int cmd, unsigned long arg)


+ 1
- 1
drivers/spi/mpc52xx_psc_spi.c View File

@ -181,7 +181,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
}
/* enable interupts and wait for wake up
/* enable interrupts and wait for wake up
* if just one byte is expected the Rx FIFO genererates no
* FFULL interrupt, so activate the RxRDY interrupt
*/


+ 1
- 1
drivers/usb/host/ehci-hub.c View File

@ -451,7 +451,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
/* Some boards (mostly VIA?) report bogus overcurrent indications,
* causing massive log spam unless we completely ignore them. It
* may be relevant that VIA VT8235 controlers, where PORT_POWER is
* may be relevant that VIA VT8235 controllers, where PORT_POWER is
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/


+ 1
- 1
drivers/usb/host/sl811-hcd.c View File

@ -1556,7 +1556,7 @@ sl811h_start(struct usb_hcd *hcd)
hcd->power_budget = sl811->board->power * 2;
}
/* enable power and interupts */
/* enable power and interrupts */
port_power(sl811, 1);
return 0;


+ 1
- 1
fs/jfs/jfs_dtree.c View File

@ -773,7 +773,7 @@ int dtSearch(struct inode *ip, struct component_name * key, ino_t * data,
getChild:
/* update max. number of pages to split */
if (BT_STACK_FULL(btstack)) {
/* Something's corrupted, mark filesytem dirty so
/* Something's corrupted, mark filesystem dirty so
* chkdsk will fix it.
*/
jfs_error(sb, "stack overrun in dtSearch!");


+ 1
- 1
fs/ocfs2/dcache.c View File

@ -376,7 +376,7 @@ out:
* directory locks. The dentries have already been deleted on other
* nodes via ocfs2_remote_dentry_delete().
*
* Normally, the VFS handles the d_move() for the file sytem, after
* Normally, the VFS handles the d_move() for the file system, after
* the ->rename() callback. OCFS2 wants to handle this internally, so
* the new lock can be created atomically with respect to the cluster.
*/


+ 1
- 1
fs/reiserfs/super.c View File

@ -319,7 +319,7 @@ static int finish_unfinished(struct super_block *s)
/* to protect file being unlinked from getting lost we "safe" link files
being unlinked. This link will be deleted in the same transaction with last
item of file. mounting the filesytem we scan all these links and remove
item of file. mounting the filesystem we scan all these links and remove
files which almost got lost */
void add_save_link(struct reiserfs_transaction_handle *th,
struct inode *inode, int truncate)


+ 2
- 2
fs/super.c View File

@ -417,7 +417,7 @@ restart:
}
/*
* Call the ->sync_fs super_op against all filesytems which are r/w and
* Call the ->sync_fs super_op against all filesystems which are r/w and
* which implement it.
*
* This operation is careful to avoid the livelock which could easily happen
@ -425,7 +425,7 @@ restart:
* is used only here. We set it against all filesystems and then clear it as
* we sync them. So redirtied filesystems are skipped.
*
* But if process A is currently running sync_filesytems and then process B
* But if process A is currently running sync_filesystems and then process B
* calls sync_filesystems as well, process B will set all the s_need_sync_fs
* flags again, which will cause process A to resync everything. Fix that with
* a local mutex.


+ 1
- 1
include/asm-arm/dma-mapping.h View File

@ -401,7 +401,7 @@ extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enu
*
* On the SA-1111, a bug limits DMA to only certain regions of RAM.
* On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
* On some ADI engineering sytems, PCI inbound window is 32MB (12MB total RAM)
* On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
*
* The following are helper functions used by the dmabounce subystem
*


+ 1
- 1
include/asm-mips/pci/bridge.h View File

@ -538,7 +538,7 @@ typedef struct bridge_err_cmdword_s {
BRIDGE_ISR_PMU_ESIZE_FAULT)
/*
* List of Errors which are fatal and kill the sytem
* List of Errors which are fatal and kill the system
*/
#define BRIDGE_ISR_ERROR_FATAL \
((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\


+ 1
- 1
include/asm-sh/se7751.h View File

@ -36,7 +36,7 @@
#define PA_LED 0xba000000 /* LED */
#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */
#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */


+ 1
- 1
include/asm-sh/systemh7751.h View File

@ -36,7 +36,7 @@
#define PA_LED 0xba000000 /* LED */
#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controler */
#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */


+ 1
- 1
include/linux/ipmi_smi.h View File

@ -118,7 +118,7 @@ struct ipmi_smi_handlers
/* Enable/disable firmware maintenance mode. Note that this
is *not* the modes defined, this is simply an on/off
setting. The message handler does the mode handling. Note
that this is called from interupt context, so it cannot
that this is called from interrupt context, so it cannot
block. */
void (*set_maintenance_mode)(void *send_info, int enable);


+ 1
- 1
kernel/hrtimer.c View File

@ -412,7 +412,7 @@ static int hrtimer_reprogram(struct hrtimer *timer,
/*
* When the callback is running, we do not reprogram the clock event
* device. The timer callback is either running on a different CPU or
* the callback is executed in the hrtimer_interupt context. The
* the callback is executed in the hrtimer_interrupt context. The
* reprogramming is handled either by the softirq, which called the
* callback or at the end of the hrtimer_interrupt.
*/


+ 2
- 2
kernel/sched.c View File

@ -5146,7 +5146,7 @@ static int __migrate_task_irq(struct task_struct *p, int src_cpu, int dest_cpu)
}
/*
* Figure out where task on dead CPU should go, use force if neccessary.
* Figure out where task on dead CPU should go, use force if necessary.
* NOTE: interrupts should be disabled by the caller
*/
static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p)
@ -5525,7 +5525,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
/* Strictly unneccessary, as first user will wake it. */
/* Strictly unnecessary, as first user will wake it. */
wake_up_process(cpu_rq(cpu)->migration_thread);
break;


+ 1
- 1
kernel/taskstats.c View File

@ -263,7 +263,7 @@ out:
stats->version = TASKSTATS_VERSION;
/*
* Accounting subsytems can also add calls here to modify
* Accounting subsystems can also add calls here to modify
* fields of taskstats.
*/
return rc;


+ 1
- 1
lib/kobject_uevent.c View File

@ -126,7 +126,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
else
subsystem = kobject_name(&kset->kobj);
if (!subsystem) {
pr_debug("unset subsytem caused the event to drop!\n");
pr_debug("unset subsystem caused the event to drop!\n");
return 0;
}


+ 1
- 1
net/irda/discovery.c View File

@ -202,7 +202,7 @@ void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force)
/* Drop the spinlock before calling the higher layers, as
* we can't guarantee they won't call us back and create a
* deadlock. We will work on our own private data, so we
* don't care to be interupted. - Jean II */
* don't care to be interrupted. - Jean II */
spin_unlock_irqrestore(&log->hb_spinlock, flags);
if(buffer == NULL)


+ 1
- 1
net/iucv/iucv.c View File

@ -389,7 +389,7 @@ static void iucv_block_cpu(void *data)
* iucv_declare_cpu
* @data: unused
*
* Declare a interupt buffer on this cpu.
* Declare a interrupt buffer on this cpu.
*/
static void iucv_declare_cpu(void *data)
{


+ 1
- 1
net/netfilter/xt_CONNMARK.c View File

@ -23,7 +23,7 @@
#include <linux/ip.h>
#include <net/checksum.h>
MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
MODULE_AUTHOR("Henrik Nordstrom <hno@marasystems.com>");
MODULE_DESCRIPTION("IP tables CONNMARK matching module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_CONNMARK");


+ 1
- 1
net/netfilter/xt_connmark.c View File

@ -25,7 +25,7 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_connmark.h>
MODULE_AUTHOR("Henrik Nordstrom <hno@marasytems.com>");
MODULE_AUTHOR("Henrik Nordstrom <hno@marasystems.com>");
MODULE_DESCRIPTION("IP tables connmark match module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_connmark");


+ 1
- 1
net/sched/em_meta.c View File

@ -55,7 +55,7 @@
* ppp0..9.
*
* NOTE: Certain meta values depend on other subsystems and are
* only available if that subsytem is enabled in the kernel.
* only available if that subsystem is enabled in the kernel.
*/
#include <linux/module.h>


+ 4
- 4
sound/core/seq/seq_midi_emul.c View File

@ -71,7 +71,7 @@ static void reset_all_channels(struct snd_midi_channel_set *chset);
* such as GM, GS and XG.
* There modes that this module will run in are:
* Generic MIDI - no interpretation at all, it will just save current values
* of controlers etc.
* of controllers etc.
* GM - You can use all gm_ prefixed elements of chan. Controls, RPN, NRPN,
* SysEx will be interpreded as defined in General Midi.
* GS - You can use all gs_ prefixed elements of chan. Codes for GS will be
@ -176,7 +176,7 @@ snd_midi_process_event(struct snd_midi_op *ops,
ev->data.control.value);
break;
case SNDRV_SEQ_EVENT_NONREGPARAM:
/* Break it back into its controler values */
/* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_NONREGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@ -189,7 +189,7 @@ snd_midi_process_event(struct snd_midi_op *ops,
nrpn(ops, drv, chan, chanset);
break;
case SNDRV_SEQ_EVENT_REGPARAM:
/* Break it back into its controler values */
/* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_REGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@ -267,7 +267,7 @@ note_off(struct snd_midi_op *ops, void *drv, struct snd_midi_channel *chan,
}
/*
* Do all driver independent operations for this controler and pass
* Do all driver independent operations for this controller and pass
* events that need to take place immediately to the driver.
*/
static void


+ 1
- 1
sound/drivers/opl3/opl3_midi.c View File

@ -808,7 +808,7 @@ static void snd_opl3_pitch_ctrl(struct snd_opl3 *opl3, struct snd_midi_channel *
}
/*
* Deal with a controler type event. This includes all types of
* Deal with a controller type event. This includes all types of
* control events, not just the midi controllers
*/
void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan)


+ 2
- 2
sound/isa/es18xx.c View File

@ -623,7 +623,7 @@ static int snd_es18xx_capture_prepare(struct snd_pcm_substream *substream)
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
/* Set DMA controler */
/* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
return 0;
@ -689,7 +689,7 @@ static int snd_es18xx_playback2_prepare(struct snd_es18xx *chip,
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
/* Set DMA controler */
/* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
return 0;


+ 4
- 4
sound/mips/au1x00.c View File

@ -498,8 +498,8 @@ snd_au1000_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
int i;
spin_lock(&au1000->ac97_lock);
/* would rather use the interupt than this polling but it works and I can't
get the interupt driven case to work efficiently */
/* would rather use the interrupt than this polling but it works and I can't
get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;
@ -535,8 +535,8 @@ snd_au1000_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short
int i;
spin_lock(&au1000->ac97_lock);
/* would rather use the interupt than this polling but it works and I can't
get the interupt driven case to work efficiently */
/* would rather use the interrupt than this polling but it works and I can't
get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;


+ 1
- 1
sound/pci/au88x0/au88x0.c View File

@ -191,7 +191,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
/* Init audio core.
* This must be done before we do request_irq otherwise we can get spurious
* interupts that we do not handle properly and make a mess of things */
* interrupts that we do not handle properly and make a mess of things */
if ((err = vortex_core_init(chip)) != 0) {
printk(KERN_ERR "hw core init failed\n");
goto core_out;


+ 1
- 1
sound/soc/soc-core.c View File

@ -264,7 +264,7 @@ out:
}
/*
* Power down the audio subsytem pmdown_time msecs after close is called.
* Power down the audio subsystem pmdown_time msecs after close is called.
* This is to ensure there are no pops or clicks in between any music tracks
* due to DAPM power cycling.
*/


+ 1
- 1
sound/soc/soc-dapm.c View File