path: root/include/configs/igep0046.h

/*
 * Copyright (C) 2016 ISEE 2007 SL - http://www.isee.biz
 *
 * Header file for IGEP0046 board
 *
 * Author: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_IGEP0046_H
#define __CONFIG_IGEP0046_H

#include "mx6_common.h"	

/* Falcon Mode */
#ifdef CONFIG_SPL
#include "imx6_spl.h"

#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
#define CONFIG_CMD_SPL
#define CONFIG_SPL_BOARD_INIT

#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
#define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)

/* Falcon Mode - RAW MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
#endif


/* STAGES */
#define CONFIG_LAST_STAGE_INIT
/* CPU */
#define CONFIG_IMX_THERMAL

/* GPIO */
#define CONFIG_MXC_GPIO

/* UART Configs */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART2_BASE
#define CONSOLE_DEV					"ttymxc1"
#define CONFIG_BAUDRATE				115200
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

/* Physical Memory Map */
#define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Begin and End Address of simple memory test */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000


/* Miscellaneous configurable options */
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT "Press ESC to abort autoboot in %d seconds\n"
#define CONFIG_AUTOBOOT_STOP_STR "\x1b"
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC Configs */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* MMC Configs */
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2
#define CONFIG_DOS_PARTITION

#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE

/* EEPROM Configs */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_EEPROM_SIZE				(4 * 1024)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
#define CONFIG_CMD_EEPROM_LAYOUT
#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
#define CONFIG_SYS_I2C_EEPROM_BUS			2
#define CONFIG_SYS_I2C_EEPROM_ADDR			0x50

/* NET Configs */
#define CONFIG_ENV_OVERWRITE		/* To allow write MAC into ethaddr variable */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MARVELL

#if defined(CONFIG_MX6DL)
#define CONFIG_RESET_PHY_R			/* Software Reset of PHY */
#endif
#if defined(CONFIG_MX6Q)
#define CONFIG_RESET_PHY_R
#endif 

/* Initial ARP Hangs so configure small timeout */

/* USB Configs */
/* Host */
#define CONFIG_USB
#define CONFIG_USB_EHCI				/* EHCI driver */
#define CONFIG_USB_EHCI_MX6			/* iMX6 EHCI driver */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* OTG Core Init after Reset*/
#define CONFIG_USB_HOST_ETHER			/* USB Ethernet support */
#define CONFIG_USB_ETHER_ASIX			/* USB Ethernet support hardware adapter */
#define CONFIG_USB_KEYBOARD			/* USB Keyboard support */
#define CONFIG_USB_STORAGE			/* USB Storage support */
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW) /* MACRO non-ehci registers in the FSL SOC USB controller */
#define CONFIG_MXC_USB_FLAGS		0	/* MXC Flag for ehci_hcd_init ?? */
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2 	/* Enabled USB controller number (core 0 + core 1) */

/* Device */
#define CONFIG_CI_UDC				/* USB ChipIdea Device driver */
#define CONFIG_USBD_HS				/* USB Device High speed support */
#define CONFIG_USB_GADGET			/* USB Device Gadget Layer support */	
#define CONFIG_USB_GADGET_DUALSPEED		/* USB Device High speed support Ethernet */
#define CONFIG_USB_FUNCTION_MASS_STORAGE	/* USB Device Mass Storage support */
#define CONFIG_USB_GADGET_DOWNLOAD		/* USB Download Gadget support */
#define CONFIG_USB_GADGET_VBUS_DRAW	2	/* Maximum VBUS power usage  (2-500 mA) */
#define CONFIG_G_DNL_VENDOR_NUM		0x0525	/* Vendor ID of USB Device */
#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5	/* Product ID of USB Device */
#define CONFIG_G_DNL_MANUFACTURER	"FSL"	/* Manufacturer of USB Device */

/* Environment */
#define CONFIG_ENV_SIZE			(128 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0

/* Commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#undef 	CONFIG_CMD_IMLS

#ifdef CONFIG_SUPPORT_EMMC_BOOT
#define EMMC_ENV \
	"emmcdev=1\0" \
	"update_emmc_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
			"if mmc dev ${emmcdev} 1; then "	\
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0"
#else
#define EMMC_ENV ""
#endif


#define VIDEO_ARGS        "${video_args}"
#define VIDEO_ARGS_SCRIPT "run video_args_script; "


#ifndef VIDEO_ARGS
#define VIDEO_ARGS ""
else
#define VIDEO_ARGS        "${video_args}"
#endif

#ifndef VIDEO_ARGS_SCRIPT
#define VIDEO_ARGS_SCRIPT ""
#else
#define VIDEO_ARGS_SCRIPT "run video_args_script; "
#endif

#if defined(CONFIG_MX6DL)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootenv=uEnv.txt\0" \
	"image=zImage\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"bootdir=\0" \
	"ethaddr=\0" \
	"ip_dyn=no\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot="CONFIG_MMCROOT " rootwait rw\0" \
	"emmcroot=/dev/mmcblk2p2 rootwait rw\0" \
	"sataroot=/dev/sda2 rw rootwait\0" \
	"emmcdevconf=setenv mmcdev ${emmcdev}\0" \
	"emmcrootconf=setenv mmcroot ${emmcroot}\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	EMMC_ENV	  \
	"video_args_hdmi=setenv video_args $video_args " \
		"video=mxcfb${fb}:dev=hdmi,1920x1080M@60,if=RGB24\0" \
	"video_args_lvds=setenv video_args $video_args " \
		"video=mxcfb${fb}:dev=ldb,1280x720M@60,if=RGB24\0" \
	"fb=0\0" \
	"video_interfaces=hdmi lvds\0" \
	"video_args_script=" \
		"for v in ${video_interfaces}; do " \
			"run video_args_${v}; " \
			"setexpr fb $fb + 1; " \
		"done\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot} fec.macaddr=${ethaddr} " \
		VIDEO_ARGS "\0" \
	"loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}  ${bootdir}${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootdir}${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${bootdir}${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		VIDEO_ARGS_SCRIPT \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"sataargs=setenv bootargs console=${console},${baudrate} " \
		"root=${sataroot} fec.macaddr=${ethaddr} " \
		VIDEO_ARGS "\0" \
	"loadimagesata=fatload sata 0:1 ${loadaddr}  ${bootdir}${image}\0" \
	"loadfdtsata=fatload sata 0:1 ${fdt_addr} ${bootdir}${fdt_file}\0" \
	"sataboot=echo Booting from sata ...; " \
		VIDEO_ARGS_SCRIPT \
		"run sataargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdtsata; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if run loadfdtsata; then " \
					"bootz ${loadaddr} - ${fdt_addr}; " \
				"else " \
					"if test ${boot_fdt} = try; then " \
						"bootz; " \
					"else " \
						"echo WARN: Cannot load the DT; " \
					"fi; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs fec.macaddr=${ethaddr} " \
		"ip=dhcp nfsroot=${serverip}:${rootnfs},v3,tcp " \
		VIDEO_ARGS "\0" \
	"netboot=echo Booting from net ...; " \
		VIDEO_ARGS_SCRIPT \
		"run netargs; " \
		"ping ${serverip}; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${bootdir}${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${bootdir}${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"echo Try first mmc 1 (SD)...; " \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment from  ${bootdir}${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if run loadimage; then " \
			"run mmcboot; " \
		"fi; " \
	"fi; " \
	"echo Try second mmc (eMMC)...; " \
	"run emmcdevconf;" \
	"run emmcrootconf;" \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment from  ${bootdir}${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if run loadimage; then " \
			"run mmcboot; " \
		"fi; " \
	"fi; " \
	"run netboot;"
#endif

#if defined(CONFIG_MX6Q)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootenv=uEnv.txt\0" \
	"bootdir=\0" \
	"ethaddr=\0" \
	"image=zImage\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=no\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot="CONFIG_MMCROOT " rootwait rw\0" \
	"emmcroot=/dev/mmcblk2p2 rootwait rw\0" \
	"sataroot=/dev/sda2 rw rootwait\0" \
	"emmcdevconf=setenv mmcdev ${emmcdev}\0" \
	"emmcrootconf=setenv mmcroot ${emmcroot}\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	EMMC_ENV	  \
	"video_args_hdmi=setenv video_args $video_args " \
		"video=mxcfb${fb}:dev=hdmi,1920x1080M@60,if=RGB24\0" \
	"video_args_lvds=setenv video_args $video_args " \
		"video=mxcfb${fb}:dev=ldb,1280x720M@60,if=RGB24\0" \
	"fb=0\0" \
	"video_interfaces=hdmi lvds\0" \
	"video_args_script=" \
		"for v in ${video_interfaces}; do " \
			"run video_args_${v}; " \
			"setexpr fb $fb + 1; " \
		"done\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot} fec.macaddr=${ethaddr} " \
		VIDEO_ARGS "\0" \
	"loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}  ${bootdir}${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootdir}${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${bootdir}${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		VIDEO_ARGS_SCRIPT \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"sataargs=setenv bootargs console=${console},${baudrate} " \
		"root=${sataroot} fec.macaddr=${ethaddr} " \
		VIDEO_ARGS "\0" \
	"loadimagesata=fatload sata 0:1 ${loadaddr}  ${bootdir}${image}\0" \
	"loadfdtsata=fatload sata 0:1 ${fdt_addr} ${bootdir}${fdt_file}\0" \
	"sataboot=echo Booting from sata ...; " \
		VIDEO_ARGS_SCRIPT \
		"run sataargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdtsata; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if run loadfdtsata; then " \
					"bootz ${loadaddr} - ${fdt_addr}; " \
				"else " \
					"if test ${boot_fdt} = try; then " \
						"bootz; " \
					"else " \
						"echo WARN: Cannot load the DT; " \
					"fi; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs fec.macaddr=${ethaddr} " \
		"ip=dhcp nfsroot=${serverip}:${rootnfs},v3,tcp " \
		VIDEO_ARGS "\0" \
	"netboot=echo Booting from net ...; " \
		VIDEO_ARGS_SCRIPT \
		"run netargs; " \
		"ping ${serverip}; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${bootdir}${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${bootdir}${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"echo Try first mmc (SD)...; " \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment from  ${bootdir}${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if run loadimage; then " \
			"run mmcboot; " \
		"fi; " \
	"fi; " \
	"echo Try SATA...; " \
	"sata init; " \
	"if run loadimagesata; then " \
		"run sataboot; " \
	"fi; " \
	"echo Try second mmc (eMMC)...; " \
	"run emmcdevconf;" \
	"run emmcrootconf;" \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment from  ${bootdir}${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if run loadimage; then " \
			"run mmcboot; " \
		"fi; " \
	"fi; " \
	"run netboot;"
#endif
#endif                         /* __IGEP0046_CONFIG_H */