1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <common.h>
#include <usb.h>
#include <errno.h>
#include <linux/compiler.h>
#include <usb/ehci-fsl.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/mx6x_pins.h>
#include <asm/arch/iomux-v3.h>
#include "ehci.h"
#include "ehci-core.h"
#define USB_OTGREGS_OFFSET 0x000
#define USB_H1REGS_OFFSET 0x200
#define USB_H2REGS_OFFSET 0x400
#define USB_H3REGS_OFFSET 0x600
#define USB_OTHERREGS_OFFSET 0x800
#define USB_H1_CTRL_OFFSET 0x04
#define USBPHY_CTRL 0x00000030
#define USBPHY_CTRL_SET 0x00000034
#define USBPHY_CTRL_CLR 0x00000038
#define USBPHY_CTRL_TOG 0x0000003c
#define USBPHY_PWD 0x00000000
#define USBPHY_CTRL_SFTRST 0x80000000
#define USBPHY_CTRL_CLKGATE 0x40000000
#define USBPHY_CTRL_ENUTMILEVEL3 0x00008000
#define USBPHY_CTRL_ENUTMILEVEL2 0x00004000
#define ANADIG_USB2_CHRG_DETECT 0x00000210
#define ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
#define ANADIG_USB2_PLL_480_CTRL 0x00000020
#define ANADIG_USB2_PLL_480_CTRL_SET 0x00000024
#define ANADIG_USB2_PLL_480_CTRL_CLR 0x00000028
#define ANADIG_USB2_PLL_480_CTRL_BYPASS 0x00010000
#define ANADIG_USB2_PLL_480_CTRL_ENABLE 0x00002000
#define ANADIG_USB2_PLL_480_CTRL_POWER 0x00001000
#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS 0x00000040
#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
/* USBCMD */
#define UH1_USBCMD_OFFSET 0x140
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
#define UCMD_RESET (1 << 1) /* controller reset */
static void usbh1_internal_phy_clock_gate(int on)
{
void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET;
__raw_writel(USBPHY_CTRL_CLKGATE, phy_reg);
}
static void usbh1_power_config(void)
{
void __iomem *anatop_base = (void __iomem *)ANATOP_BASE_ADDR;
/*
* Some phy and power's special controls for host1
* 1. The external charger detector needs to be disabled
* or the signal at DP will be poor
* 2. The PLL's power and output to usb for host 1
* is totally controlled by IC, so the Software only needs
* to enable them at initializtion.
*/
__raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B |
ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
anatop_base + ANADIG_USB2_CHRG_DETECT);
__raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
anatop_base + ANADIG_USB2_PLL_480_CTRL_CLR);
__raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
ANADIG_USB2_PLL_480_CTRL_POWER |
ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
anatop_base + ANADIG_USB2_PLL_480_CTRL_SET);
}
static int usbh1_phy_enable(void)
{
void __iomem *phy_reg = (void __iomem *)USB_PHY1_BASE_ADDR;
void __iomem *phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
void __iomem *usb_cmd = (void __iomem *)(USBOH3_USB_BASE_ADDR +
USB_H1REGS_OFFSET +
UH1_USBCMD_OFFSET);
u32 val;
/* Stop then Reset */
val = __raw_readl(usb_cmd);
val &= ~UCMD_RUN_STOP;
__raw_writel(val, usb_cmd);
while (__raw_readl(usb_cmd) & UCMD_RUN_STOP)
;
val = __raw_readl(usb_cmd);
val |= UCMD_RESET;
__raw_writel(val, usb_cmd);
while (__raw_readl(usb_cmd) & UCMD_RESET)
;
/* Reset USBPHY module */
val = __raw_readl(phy_ctrl);
val |= USBPHY_CTRL_SFTRST;
__raw_writel(val, phy_ctrl);
udelay(10);
/* Remove CLKGATE and SFTRST */
val = __raw_readl(phy_ctrl);
val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
__raw_writel(val, phy_ctrl);
udelay(10);
/* Power up the PHY */
__raw_writel(0, phy_reg + USBPHY_PWD);
/* enable FS/LS device */
val = __raw_readl(phy_reg + USBPHY_CTRL);
val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
__raw_writel(val, phy_reg + USBPHY_CTRL);
return 0;
}
static void usbh1_oc_config(void)
{
void __iomem *usb_base = (void __iomem *)USBOH3_USB_BASE_ADDR;
void __iomem *usbother_base = usb_base + USB_OTHERREGS_OFFSET;
u32 val;
val = __raw_readl(usbother_base + USB_H1_CTRL_OFFSET);
#if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2
/* mx6qarm2 seems to required a different setting*/
val &= ~UCTRL_OVER_CUR_POL;
#else
val |= UCTRL_OVER_CUR_POL;
#endif
__raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET);
val = __raw_readl(usbother_base + USB_H1_CTRL_OFFSET);
val |= UCTRL_OVER_CUR_DIS;
__raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET);
}
int ehci_hcd_init(void)
{
struct usb_ehci *ehci;
enable_usboh3_clk(1);
mdelay(1);
/* Do board specific initialization */
board_ehci_hcd_init(CONFIG_MXC_USB_PORT);
#if CONFIG_MXC_USB_PORT == 1
/* USB Host 1 */
usbh1_power_config();
usbh1_oc_config();
usbh1_internal_phy_clock_gate(1);
usbh1_phy_enable();
#else
#error "MXC USB port not yet supported"
#endif
ehci = (struct usb_ehci *)(USBOH3_USB_BASE_ADDR +
(0x200 * CONFIG_MXC_USB_PORT));
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
hcor = (struct ehci_hcor *)((uint32_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mdelay(10);
return 0;
}
int ehci_hcd_stop(void)
{
return 0;
}
|
