1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#ifdef CONFIG_TWL6030_POWER
#include <twl6030.h>
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
u8 msb = 0;
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
GPCH0_LSB + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
GPCH0_MSB + channel_no * 2, &msb);
if (ret)
return ret;
return (msb << 8) | lsb;
}
static int twl6030_gpadc_sw2_trigger(void)
{
u8 val;
int ret = 0;
ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
if (ret)
return ret;
/* Waiting until the SW1 conversion ends*/
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
if (ret)
return ret;
udelay(1000);
}
return 0;
}
void twl6030_stop_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
return;
}
void twl6030_start_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_INT_MASK, MBAT_TEMP);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
/* Enable USB charging */
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
return;
}
int twl6030_get_battery_current(void)
{
int battery_current = 0;
u8 msb = 0;
u8 lsb = 0;
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
battery_current = ((msb << 8) | lsb);
/* convert 10 bit signed number to 16 bit signed number */
if (battery_current >= 0x2000)
battery_current = (battery_current - 0x4000);
battery_current = battery_current * 3000 / 4096;
printf("Battery Current: %d mA\n", battery_current);
return battery_current;
}
int twl6030_get_battery_voltage(void)
{
int battery_volt = 0;
int ret = 0;
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
if (ret) {
printf("Failed to convert battery voltage\n");
return ret;
}
/* measure Vbat voltage */
battery_volt = twl6030_gpadc_read_channel(7);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
}
void twl6030_init_battery_charging(void)
{
u8 stat1 = 0;
int battery_volt = 0;
int ret = 0;
/* Enable VBAT measurement */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
if (ret) {
printf("Failed to enable GPADC\n");
return;
}
battery_volt = twl6030_get_battery_voltage();
if (battery_volt < 0)
return;
if (battery_volt < 3000)
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
/* check for battery presence indirectly via Fuel gauge */
if ((stat1 & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
}
void twl6030_power_mmc_init()
{
/* set voltage to 3.0 and turnon for APP */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15);
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21);
}
void twl6030_usb_device_settings()
{
u8 data = 0;
/* Select APP Group and set state to ON */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21);
twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data);
data |= 0x10;
/* Select the input supply for VBUS regulator */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data);
}
#endif
|
