path: root/drivers/net/phy/miiphybb.c

/*
 * (C) Copyright 2009 Industrie Dial Face S.p.A.
 * Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
 *
 * (C) Copyright 2001
 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * This provides a bit-banged interface to the ethernet MII management
 * channel.
 */

#include <common.h>
#include <ioports.h>
#include <ppc_asm.tmpl>
#include <miiphy.h>

#define BB_MII_RELOCATE(v,off) (v += (v?off:0))

DECLARE_GLOBAL_DATA_PTR;

#ifndef CONFIG_BITBANGMII_MULTI

/*
 * If CONFIG_BITBANGMII_MULTI is not defined we use a
 * compatibility layer with the previous miiphybb implementation
 * based on macros usage.
 *
 */
static int bb_mii_init_wrap(struct bb_miiphy_bus *bus)
{
#ifdef MII_INIT
	MII_INIT;
#endif
	return 0;
}

static int bb_mdio_active_wrap(struct bb_miiphy_bus *bus)
{
#ifdef MDIO_DECLARE
	MDIO_DECLARE;
#endif
	MDIO_ACTIVE;
	return 0;
}

static int bb_mdio_tristate_wrap(struct bb_miiphy_bus *bus)
{
#ifdef MDIO_DECLARE
	MDIO_DECLARE;
#endif
	MDIO_TRISTATE;
	return 0;
}

static int bb_set_mdio_wrap(struct bb_miiphy_bus *bus, int v)
{
#ifdef MDIO_DECLARE
	MDIO_DECLARE;
#endif
	MDIO(v);
	return 0;
}

static int bb_get_mdio_wrap(struct bb_miiphy_bus *bus, int *v)
{
#ifdef MDIO_DECLARE
	MDIO_DECLARE;
#endif
	*v = MDIO_READ;
	return 0;
}

static int bb_set_mdc_wrap(struct bb_miiphy_bus *bus, int v)
{
#ifdef MDC_DECLARE
	MDC_DECLARE;
#endif
	MDC(v);
	return 0;
}

static int bb_delay_wrap(struct bb_miiphy_bus *bus)
{
	MIIDELAY;
	return 0;
}

struct bb_miiphy_bus bb_miiphy_buses[] = {
	{
		.name = BB_MII_DEVNAME,
		.init = bb_mii_init_wrap,
		.mdio_active = bb_mdio_active_wrap,
		.mdio_tristate = bb_mdio_tristate_wrap,
		.set_mdio = bb_set_mdio_wrap,
		.get_mdio = bb_get_mdio_wrap,
		.set_mdc = bb_set_mdc_wrap,
		.delay = bb_delay_wrap,
	}
};

int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
			  sizeof(bb_miiphy_buses[0]);
#endif

void bb_miiphy_init(void)
{
	int i;

	for (i = 0; i < bb_miiphy_buses_num; i++) {
#if !defined(CONFIG_RELOC_FIXUP_WORKS)
		/* Relocate the hook pointers*/
		BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_tristate, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdio, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].get_mdio, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdc, gd->reloc_off);
		BB_MII_RELOCATE(bb_miiphy_buses[i].delay, gd->reloc_off);
#endif
		if (bb_miiphy_buses[i].init != NULL) {
			bb_miiphy_buses[i].init(&bb_miiphy_buses[i]);
		}
	}
}

static inline struct bb_miiphy_bus *bb_miiphy_getbus(char *devname)
{
#ifdef CONFIG_BITBANGMII_MULTI
	int i;

	/* Search the correct bus */
	for (i = 0; i < bb_miiphy_buses_num; i++) {
		if (!strcmp(bb_miiphy_buses[i].name, devname)) {
			return &bb_miiphy_buses[i];
		}
	}
	return NULL;
#else
	/* We have just one bitbanging bus */
	return &bb_miiphy_buses[0];
#endif
}

/*****************************************************************************
 *
 * Utility to send the preamble, address, and register (common to read
 * and write).
 */
static void miiphy_pre(struct bb_miiphy_bus *bus, char read,
		       unsigned char addr, unsigned char reg)
{
	int j;

	/*
	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
	 * The IEEE spec says this is a PHY optional requirement.  The AMD
	 * 79C874 requires one after power up and one after a MII communications
	 * error.  This means that we are doing more preambles than we need,
	 * but it is safer and will be much more robust.
	 */

	bus->mdio_active(bus);
	bus->set_mdio(bus, 1);
	for (j = 0; j < 32; j++) {
		bus->set_mdc(bus, 0);
		bus->delay(bus);
		bus->set_mdc(bus, 1);
		bus->delay(bus);
	}

	/* send the start bit (01) and the read opcode (10) or write (10) */
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, 0);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, read);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, !read);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);

	/* send the PHY address */
	for (j = 0; j < 5; j++) {
		bus->set_mdc(bus, 0);
		if ((addr & 0x10) == 0) {
			bus->set_mdio(bus, 0);
		} else {
			bus->set_mdio(bus, 1);
		}
		bus->delay(bus);
		bus->set_mdc(bus, 1);
		bus->delay(bus);
		addr <<= 1;
	}

	/* send the register address */
	for (j = 0; j < 5; j++) {
		bus->set_mdc(bus, 0);
		if ((reg & 0x10) == 0) {
			bus->set_mdio(bus, 0);
		} else {
			bus->set_mdio(bus, 1);
		}
		bus->delay(bus);
		bus->set_mdc(bus, 1);
		bus->delay(bus);
		reg <<= 1;
	}
}

/*****************************************************************************
 *
 * Read a MII PHY register.
 *
 * Returns:
 *   0 on success
 */
int bb_miiphy_read(char *devname, unsigned char addr,
		   unsigned char reg, unsigned short *value)
{
	short rdreg; /* register working value */
	int v;
	int j; /* counter */
	struct bb_miiphy_bus *bus;

	bus = bb_miiphy_getbus(devname);
	if (bus == NULL) {
		return -1;
	}

	if (value == NULL) {
		puts("NULL value pointer\n");
		return -1;
	}

	miiphy_pre (bus, 1, addr, reg);

	/* tri-state our MDIO I/O pin so we can read */
	bus->set_mdc(bus, 0);
	bus->mdio_tristate(bus);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);

	/* check the turnaround bit: the PHY should be driving it to zero */
	bus->get_mdio(bus, &v);
	if (v != 0) {
		/* puts ("PHY didn't drive TA low\n"); */
		for (j = 0; j < 32; j++) {
			bus->set_mdc(bus, 0);
			bus->delay(bus);
			bus->set_mdc(bus, 1);
			bus->delay(bus);
		}
		/* There is no PHY, set value to 0xFFFF and return */
		*value = 0xFFFF;
		return -1;
	}

	bus->set_mdc(bus, 0);
	bus->delay(bus);

	/* read 16 bits of register data, MSB first */
	rdreg = 0;
	for (j = 0; j < 16; j++) {
		bus->set_mdc(bus, 1);
		bus->delay(bus);
		rdreg <<= 1;
		bus->get_mdio(bus, &v);
		rdreg |= (v & 0x1);
		bus->set_mdc(bus, 0);
		bus->delay(bus);
	}

	bus->set_mdc(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 0);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);

	*value = rdreg;

#ifdef DEBUG
	printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
#endif

	return 0;
}


/*****************************************************************************
 *
 * Write a MII PHY register.
 *
 * Returns:
 *   0 on success
 */
int bb_miiphy_write (char *devname, unsigned char addr,
		     unsigned char reg, unsigned short value)
{
	struct bb_miiphy_bus *bus;
	int j;			/* counter */

	bus = bb_miiphy_getbus(devname);
	if (bus == NULL) {
		/* Bus not found! */
		return -1;
	}

	miiphy_pre (bus, 0, addr, reg);

	/* send the turnaround (10) */
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);
	bus->set_mdc(bus, 0);
	bus->set_mdio(bus, 0);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);

	/* write 16 bits of register data, MSB first */
	for (j = 0; j < 16; j++) {
		bus->set_mdc(bus, 0);
		if ((value & 0x00008000) == 0) {
			bus->set_mdio(bus, 0);
		} else {
			bus->set_mdio(bus, 1);
		}
		bus->delay(bus);
		bus->set_mdc(bus, 1);
		bus->delay(bus);
		value <<= 1;
	}

	/*
	 * Tri-state the MDIO line.
	 */
	bus->mdio_tristate(bus);
	bus->set_mdc(bus, 0);
	bus->delay(bus);
	bus->set_mdc(bus, 1);
	bus->delay(bus);

	return 0;
}