1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
|
/*
* Driver for Blackfin on-chip ATAPI controller.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (c) 2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <config.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/pata.h>
#include <ata.h>
#include <libata.h>
#include "pata_bfin.h"
static struct ata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
/**
* PIO Mode - Frequency compatibility
*/
/* mode: 0 1 2 3 4 */
static const u32 pio_fsclk[] =
{ 33333333, 33333333, 33333333, 33333333, 33333333 };
/**
* MDMA Mode - Frequency compatibility
*/
/* mode: 0 1 2 */
static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 };
/**
* UDMA Mode - Frequency compatibility
*
* UDMA5 - 100 MB/s - SCLK = 133 MHz
* UDMA4 - 66 MB/s - SCLK >= 80 MHz
* UDMA3 - 44.4 MB/s - SCLK >= 50 MHz
* UDMA2 - 33 MB/s - SCLK >= 40 MHz
*/
/* mode: 0 1 2 3 4 5 */
static const u32 udma_fsclk[] =
{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 };
/**
* Register transfer timing table
*/
/* mode: 0 1 2 3 4 */
/* Cycle Time */
static const u32 reg_t0min[] = { 600, 383, 330, 180, 120 };
/* DIOR/DIOW to end cycle */
static const u32 reg_t2min[] = { 290, 290, 290, 70, 25 };
/* DIOR/DIOW asserted pulse width */
static const u32 reg_teocmin[] = { 290, 290, 290, 80, 70 };
/**
* PIO timing table
*/
/* mode: 0 1 2 3 4 */
/* Cycle Time */
static const u32 pio_t0min[] = { 600, 383, 240, 180, 120 };
/* Address valid to DIOR/DIORW */
static const u32 pio_t1min[] = { 70, 50, 30, 30, 25 };
/* DIOR/DIOW to end cycle */
static const u32 pio_t2min[] = { 165, 125, 100, 80, 70 };
/* DIOR/DIOW asserted pulse width */
static const u32 pio_teocmin[] = { 165, 125, 100, 70, 25 };
/* DIOW data hold */
static const u32 pio_t4min[] = { 30, 20, 15, 10, 10 };
/* ******************************************************************
* Multiword DMA timing table
* ******************************************************************
*/
/* mode: 0 1 2 */
/* Cycle Time */
static const u32 mdma_t0min[] = { 480, 150, 120 };
/* DIOR/DIOW asserted pulse width */
static const u32 mdma_tdmin[] = { 215, 80, 70 };
/* DMACK to read data released */
static const u32 mdma_thmin[] = { 20, 15, 10 };
/* DIOR/DIOW to DMACK hold */
static const u32 mdma_tjmin[] = { 20, 5, 5 };
/* DIOR negated pulse width */
static const u32 mdma_tkrmin[] = { 50, 50, 25 };
/* DIOR negated pulse width */
static const u32 mdma_tkwmin[] = { 215, 50, 25 };
/* CS[1:0] valid to DIOR/DIOW */
static const u32 mdma_tmmin[] = { 50, 30, 25 };
/* DMACK to read data released */
static const u32 mdma_tzmax[] = { 20, 25, 25 };
/**
* Ultra DMA timing table
*/
/* mode: 0 1 2 3 4 5 */
static const u32 udma_tcycmin[] = { 112, 73, 54, 39, 25, 17 };
static const u32 udma_tdvsmin[] = { 70, 48, 31, 20, 7, 5 };
static const u32 udma_tenvmax[] = { 70, 70, 70, 55, 55, 50 };
static const u32 udma_trpmin[] = { 160, 125, 100, 100, 100, 85 };
static const u32 udma_tmin[] = { 5, 5, 5, 5, 3, 3 };
static const u32 udma_tmlimin = 20;
static const u32 udma_tzahmin = 20;
static const u32 udma_tenvmin = 20;
static const u32 udma_tackmin = 20;
static const u32 udma_tssmin = 50;
static void msleep(int count)
{
int i;
for (i = 0; i < count; i++)
udelay(1000);
}
/**
*
* Function: num_clocks_min
*
* Description:
* calculate number of SCLK cycles to meet minimum timing
*/
static unsigned short num_clocks_min(unsigned long tmin,
unsigned long fsclk)
{
unsigned long tmp ;
unsigned short result;
tmp = tmin * (fsclk/1000/1000) / 1000;
result = (unsigned short)tmp;
if ((tmp*1000*1000) < (tmin*(fsclk/1000)))
result++;
return result;
}
/**
* bfin_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @pio_mode: mode
*
* Set PIO mode for device.
*
* LOCKING:
* None (inherited from caller).
*/
static void bfin_set_piomode(struct ata_port *ap, int pio_mode)
{
int mode = pio_mode - XFER_PIO_0;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned int fsclk = get_sclk();
unsigned short teoc_reg, t2_reg, teoc_pio;
unsigned short t4_reg, t2_pio, t1_reg;
unsigned short n0, n6, t6min = 5;
/* the most restrictive timing value is t6 and tc, the DIOW - data hold
* If one SCLK pulse is longer than this minimum value then register
* transfers cannot be supported at this frequency.
*/
n6 = num_clocks_min(t6min, fsclk);
if (mode >= 0 && mode <= 4 && n6 >= 1) {
debug("set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
/* calculate the timing values for register transfers. */
while (mode > 0 && pio_fsclk[mode] > fsclk)
mode--;
/* DIOR/DIOW to end cycle time */
t2_reg = num_clocks_min(reg_t2min[mode], fsclk);
/* DIOR/DIOW asserted pulse width */
teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk);
/* Cycle Time */
n0 = num_clocks_min(reg_t0min[mode], fsclk);
/* increase t2 until we meed the minimum cycle length */
if (t2_reg + teoc_reg < n0)
t2_reg = n0 - teoc_reg;
/* calculate the timing values for pio transfers. */
/* DIOR/DIOW to end cycle time */
t2_pio = num_clocks_min(pio_t2min[mode], fsclk);
/* DIOR/DIOW asserted pulse width */
teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk);
/* Cycle Time */
n0 = num_clocks_min(pio_t0min[mode], fsclk);
/* increase t2 until we meed the minimum cycle length */
if (t2_pio + teoc_pio < n0)
t2_pio = n0 - teoc_pio;
/* Address valid to DIOR/DIORW */
t1_reg = num_clocks_min(pio_t1min[mode], fsclk);
/* DIOW data hold */
t4_reg = num_clocks_min(pio_t4min[mode], fsclk);
ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg));
ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg));
ATAPI_SET_PIO_TIM_1(base, teoc_pio);
if (mode > 2) {
ATAPI_SET_CONTROL(base,
ATAPI_GET_CONTROL(base) | IORDY_EN);
} else {
ATAPI_SET_CONTROL(base,
ATAPI_GET_CONTROL(base) & ~IORDY_EN);
}
/* Disable host ATAPI PIO interrupts */
ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base)
& ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK));
SSYNC();
}
}
/**
*
* Function: wait_complete
*
* Description: Waits the interrupt from device
*
*/
static inline void wait_complete(void __iomem *base, unsigned short mask)
{
unsigned short status;
unsigned int i = 0;
for (i = 0; i < PATA_BFIN_WAIT_TIMEOUT; i++) {
status = ATAPI_GET_INT_STATUS(base) & mask;
if (status)
break;
}
ATAPI_SET_INT_STATUS(base, mask);
}
/**
*
* Function: write_atapi_register
*
* Description: Writes to ATA Device Resgister
*
*/
static void write_atapi_register(void __iomem *base,
unsigned long ata_reg, unsigned short value)
{
/* Program the ATA_DEV_TXBUF register with write data (to be
* written into the device).
*/
ATAPI_SET_DEV_TXBUF(base, value);
/* Program the ATA_DEV_ADDR register with address of the
* device register (0x01 to 0x0F).
*/
ATAPI_SET_DEV_ADDR(base, ata_reg);
/* Program the ATA_CTRL register with dir set to write (1)
*/
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
/* ensure PIO DMA is not set */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
/* and start the transfer */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
/* Wait for the interrupt to indicate the end of the transfer.
* (We need to wait on and clear rhe ATA_DEV_INT interrupt status)
*/
wait_complete(base, PIO_DONE_INT);
}
/**
*
* Function: read_atapi_register
*
*Description: Reads from ATA Device Resgister
*
*/
static unsigned short read_atapi_register(void __iomem *base,
unsigned long ata_reg)
{
/* Program the ATA_DEV_ADDR register with address of the
* device register (0x01 to 0x0F).
*/
ATAPI_SET_DEV_ADDR(base, ata_reg);
/* Program the ATA_CTRL register with dir set to read (0) and
*/
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
/* ensure PIO DMA is not set */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
/* and start the transfer */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
/* Wait for the interrupt to indicate the end of the transfer.
* (PIO_DONE interrupt is set and it doesn't seem to matter
* that we don't clear it)
*/
wait_complete(base, PIO_DONE_INT);
/* Read the ATA_DEV_RXBUF register with write data (to be
* written into the device).
*/
return ATAPI_GET_DEV_RXBUF(base);
}
/**
*
* Function: write_atapi_register_data
*
* Description: Writes to ATA Device Resgister
*
*/
static void write_atapi_data(void __iomem *base,
int len, unsigned short *buf)
{
int i;
/* Set transfer length to 1 */
ATAPI_SET_XFER_LEN(base, 1);
/* Program the ATA_DEV_ADDR register with address of the
* ATA_REG_DATA
*/
ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
/* Program the ATA_CTRL register with dir set to write (1)
*/
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
/* ensure PIO DMA is not set */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
for (i = 0; i < len; i++) {
/* Program the ATA_DEV_TXBUF register with write data (to be
* written into the device).
*/
ATAPI_SET_DEV_TXBUF(base, buf[i]);
/* and start the transfer */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
/* Wait for the interrupt to indicate the end of the transfer.
* (We need to wait on and clear rhe ATA_DEV_INT
* interrupt status)
*/
wait_complete(base, PIO_DONE_INT);
}
}
/**
*
* Function: read_atapi_register_data
*
* Description: Reads from ATA Device Resgister
*
*/
static void read_atapi_data(void __iomem *base,
int len, unsigned short *buf)
{
int i;
/* Set transfer length to 1 */
ATAPI_SET_XFER_LEN(base, 1);
/* Program the ATA_DEV_ADDR register with address of the
* ATA_REG_DATA
*/
ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
/* Program the ATA_CTRL register with dir set to read (0) and
*/
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
/* ensure PIO DMA is not set */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
for (i = 0; i < len; i++) {
/* and start the transfer */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
/* Wait for the interrupt to indicate the end of the transfer.
* (PIO_DONE interrupt is set and it doesn't seem to matter
* that we don't clear it)
*/
wait_complete(base, PIO_DONE_INT);
/* Read the ATA_DEV_RXBUF register with write data (to be
* written into the device).
*/
buf[i] = ATAPI_GET_DEV_RXBUF(base);
}
}
/**
* bfin_check_status - Read device status reg & clear interrupt
* @ap: port where the device is
*
* Note: Original code is ata_check_status().
*/
static u8 bfin_check_status(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
return read_atapi_register(base, ATA_REG_STATUS);
}
/**
* bfin_check_altstatus - Read device alternate status reg
* @ap: port where the device is
*/
static u8 bfin_check_altstatus(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
return read_atapi_register(base, ATA_REG_ALTSTATUS);
}
/**
* bfin_ata_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
* @max: number of 10uS waits to perform
*
* Waits up to max*10 microseconds for the selected bits in the port's
* status register to be cleared.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 bfin_ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max, u8 usealtstatus)
{
u8 status;
do {
udelay(10);
if (usealtstatus)
status = bfin_check_altstatus(ap);
else
status = bfin_check_status(ap);
max--;
} while (status != 0xff && (status & bits) && (max > 0));
return status;
}
/**
* bfin_ata_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout in msecs
* @tmout: overall timeout in msecs
*
* Sleep until ATA Status register bit BSY clears,
* or a timeout occurs.
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
static int bfin_ata_busy_sleep(struct ata_port *ap,
long tmout_pat, unsigned long tmout)
{
u8 status;
status = bfin_ata_busy_wait(ap, ATA_BUSY, 300, 0);
while (status != 0xff && (status & ATA_BUSY) && tmout_pat > 0) {
msleep(50);
tmout_pat -= 50;
status = bfin_ata_busy_wait(ap, ATA_BUSY, 3, 0);
}
if (status != 0xff && (status & ATA_BUSY))
printf("port is slow to respond, please be patient "
"(Status 0x%x)\n", status);
while (status != 0xff && (status & ATA_BUSY) && tmout_pat > 0) {
msleep(50);
tmout_pat -= 50;
status = bfin_check_status(ap);
}
if (status == 0xff)
return -ENODEV;
if (status & ATA_BUSY) {
printf("port failed to respond "
"(%lu secs, Status 0x%x)\n",
DIV_ROUND_UP(tmout, 1000), status);
return -EBUSY;
}
return 0;
}
/**
* bfin_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
* Note: Original code is ata_sff_dev_select().
*/
static void bfin_dev_select(struct ata_port *ap, unsigned int device)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 tmp;
if (device == 0)
tmp = ATA_DEVICE_OBS;
else
tmp = ATA_DEVICE_OBS | ATA_DEV1;
write_atapi_register(base, ATA_REG_DEVICE, tmp);
udelay(1);
}
/**
* bfin_devchk - PATA device presence detection
* @ap: ATA channel to examine
* @device: Device to examine (starting at zero)
*
* Note: Original code is ata_devchk().
*/
static unsigned int bfin_devchk(struct ata_port *ap,
unsigned int device)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 nsect, lbal;
bfin_dev_select(ap, device);
write_atapi_register(base, ATA_REG_NSECT, 0x55);
write_atapi_register(base, ATA_REG_LBAL, 0xaa);
write_atapi_register(base, ATA_REG_NSECT, 0xaa);
write_atapi_register(base, ATA_REG_LBAL, 0x55);
write_atapi_register(base, ATA_REG_NSECT, 0x55);
write_atapi_register(base, ATA_REG_LBAL, 0xaa);
nsect = read_atapi_register(base, ATA_REG_NSECT);
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 0x55) && (lbal == 0xaa))
return 1; /* we found a device */
return 0; /* nothing found */
}
/**
* bfin_bus_post_reset - PATA device post reset
*
* Note: Original code is ata_bus_post_reset().
*/
static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
long deadline;
/* if device 0 was found in ata_devchk, wait for its
* BSY bit to clear
*/
if (dev0)
bfin_ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
*/
deadline = ATA_TMOUT_BOOT;
while (dev1) {
u8 nsect, lbal;
bfin_dev_select(ap, 1);
nsect = read_atapi_register(base, ATA_REG_NSECT);
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 1) && (lbal == 1))
break;
if (deadline <= 0) {
dev1 = 0;
break;
}
msleep(50); /* give drive a breather */
deadline -= 50;
}
if (dev1)
bfin_ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* is all this really necessary? */
bfin_dev_select(ap, 0);
if (dev1)
bfin_dev_select(ap, 1);
if (dev0)
bfin_dev_select(ap, 0);
}
/**
* bfin_bus_softreset - PATA device software reset
*
* Note: Original code is ata_bus_softreset().
*/
static unsigned int bfin_bus_softreset(struct ata_port *ap,
unsigned int devmask)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
/* software reset. causes dev0 to be selected */
write_atapi_register(base, ATA_REG_CTRL, ap->ctl_reg);
udelay(20);
write_atapi_register(base, ATA_REG_CTRL, ap->ctl_reg | ATA_SRST);
udelay(20);
write_atapi_register(base, ATA_REG_CTRL, ap->ctl_reg);
/* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
* ATAPI devices in Hale Landis's ATADRVR, for the period of time
* between when the ATA command register is written, and then
* status is checked. Because waiting for "a while" before
* checking status is fine, post SRST, we perform this magic
* delay here as well.
*
* Old drivers/ide uses the 2mS rule and then waits for ready
*/
msleep(150);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
* pulldown resistor.
*/
if (bfin_check_status(ap) == 0xFF)
return 0;
bfin_bus_post_reset(ap, devmask);
return 0;
}
/**
* bfin_softreset - reset host port via ATA SRST
* @ap: port to reset
*
* Note: Original code is ata_sff_softreset().
*/
static int bfin_softreset(struct ata_port *ap)
{
unsigned int err_mask;
ap->dev_mask = 0;
/* determine if device 0/1 are present.
* only one device is supported on one port by now.
*/
if (bfin_devchk(ap, 0))
ap->dev_mask |= (1 << 0);
else if (bfin_devchk(ap, 1))
ap->dev_mask |= (1 << 1);
else
return -ENODEV;
/* select device 0 again */
bfin_dev_select(ap, 0);
/* issue bus reset */
err_mask = bfin_bus_softreset(ap, ap->dev_mask);
if (err_mask) {
printf("SRST failed (err_mask=0x%x)\n",
err_mask);
ap->dev_mask = 0;
return -EIO;
}
return 0;
}
/**
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
* Note: Original code is ata_sff_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
}
static u8 bfin_wait_for_irq(struct ata_port *ap, unsigned int max)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
do {
if (ATAPI_GET_INT_STATUS(base) & (ATAPI_DEV_INT
| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT)) {
break;
}
udelay(1000);
max--;
} while ((max > 0));
return max == 0;
}
/**
* bfin_ata_reset_port - initialize BFIN ATAPI port.
*/
static int bfin_ata_reset_port(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
int count;
unsigned short status;
/* Disable all ATAPI interrupts */
ATAPI_SET_INT_MASK(base, 0);
SSYNC();
/* Assert the RESET signal 25us*/
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST);
udelay(30);
/* Negate the RESET signal for 2ms*/
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST);
msleep(2);
/* Wait on Busy flag to clear */
count = 10000000;
do {
status = read_atapi_register(base, ATA_REG_STATUS);
} while (--count && (status & ATA_BUSY));
/* Enable only ATAPI Device interrupt */
ATAPI_SET_INT_MASK(base, 1);
SSYNC();
return !count;
}
/**
*
* Function: bfin_config_atapi_gpio
*
* Description: Configures the ATAPI pins for use
*
*/
static int bfin_config_atapi_gpio(struct ata_port *ap)
{
const unsigned short pins[] = {
P_ATAPI_RESET, P_ATAPI_DIOR, P_ATAPI_DIOW, P_ATAPI_CS0,
P_ATAPI_CS1, P_ATAPI_DMACK, P_ATAPI_DMARQ, P_ATAPI_INTRQ,
P_ATAPI_IORDY, P_ATAPI_D0A, P_ATAPI_D1A, P_ATAPI_D2A,
P_ATAPI_D3A, P_ATAPI_D4A, P_ATAPI_D5A, P_ATAPI_D6A,
P_ATAPI_D7A, P_ATAPI_D8A, P_ATAPI_D9A, P_ATAPI_D10A,
P_ATAPI_D11A, P_ATAPI_D12A, P_ATAPI_D13A, P_ATAPI_D14A,
P_ATAPI_D15A, P_ATAPI_A0A, P_ATAPI_A1A, P_ATAPI_A2A, 0,
};
peripheral_request_list(pins, "pata_bfin");
return 0;
}
/**
* bfin_atapi_probe - attach a bfin atapi interface
* @pdev: platform device
*
* Register a bfin atapi interface.
*
*
* Platform devices are expected to contain 2 resources per port:
*
* - I/O Base (IORESOURCE_IO)
* - IRQ (IORESOURCE_IRQ)
*
*/
static int bfin_ata_probe_port(struct ata_port *ap)
{
if (bfin_config_atapi_gpio(ap)) {
printf("Requesting Peripherals faild\n");
return -EFAULT;
}
if (bfin_ata_reset_port(ap)) {
printf("Fail to reset ATAPI device\n");
return -EFAULT;
}
if (ap->ata_mode >= XFER_PIO_0 && ap->ata_mode <= XFER_PIO_4)
bfin_set_piomode(ap, ap->ata_mode);
else {
printf("Given ATA data transfer mode is not supported.\n");
return -EFAULT;
}
return 0;
}
#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
static void bfin_ata_identify(struct ata_port *ap, int dev)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 status = 0;
static u16 iobuf[ATA_SECTOR_WORDS];
u64 n_sectors = 0;
hd_driveid_t *iop = (hd_driveid_t *)iobuf;
memset(iobuf, 0, sizeof(iobuf));
if (!(ap->dev_mask & (1 << dev)))
return;
debug("port=%d dev=%d\n", ap->port_no, dev);
bfin_dev_select(ap, dev);
status = 0;
/* Device Identify Command */
write_atapi_register(base, ATA_REG_CMD, ATA_CMD_ID_ATA);
bfin_check_altstatus(ap);
udelay(10);
status = bfin_ata_busy_wait(ap, ATA_BUSY, 1000, 0);
if (status & ATA_ERR) {
printf("\ndevice not responding\n");
ap->dev_mask &= ~(1 << dev);
return;
}
read_atapi_data(base, ATA_SECTOR_WORDS, iobuf);
ata_swap_buf_le16(iobuf, ATA_SECTOR_WORDS);
/* we require LBA and DMA support (bits 8 & 9 of word 49) */
if (!ata_id_has_dma(iobuf) || !ata_id_has_lba(iobuf))
printf("ata%u: no dma/lba\n", ap->port_no);
#ifdef DEBUG
ata_dump_id(iobuf);
#endif
n_sectors = ata_id_n_sectors(iobuf);
if (n_sectors == 0) {
ap->dev_mask &= ~(1 << dev);
return;
}
ata_id_c_string(iobuf, (unsigned char *)sata_dev_desc[ap->port_no].revision,
ATA_ID_FW_REV, sizeof(sata_dev_desc[ap->port_no].revision));
ata_id_c_string(iobuf, (unsigned char *)sata_dev_desc[ap->port_no].vendor,
ATA_ID_PROD, sizeof(sata_dev_desc[ap->port_no].vendor));
ata_id_c_string(iobuf, (unsigned char *)sata_dev_desc[ap->port_no].product,
ATA_ID_SERNO, sizeof(sata_dev_desc[ap->port_no].product));
if ((iop->config & 0x0080) == 0x0080)
sata_dev_desc[ap->port_no].removable = 1;
else
sata_dev_desc[ap->port_no].removable = 0;
sata_dev_desc[ap->port_no].lba = (u32) n_sectors;
debug("lba=0x%lx\n", sata_dev_desc[ap->port_no].lba);
#ifdef CONFIG_LBA48
if (iop->command_set_2 & 0x0400)
sata_dev_desc[ap->port_no].lba48 = 1;
else
sata_dev_desc[ap->port_no].lba48 = 0;
#endif
/* assuming HD */
sata_dev_desc[ap->port_no].type = DEV_TYPE_HARDDISK;
sata_dev_desc[ap->port_no].blksz = ATA_SECT_SIZE;
sata_dev_desc[ap->port_no].lun = 0; /* just to fill something in... */
printf("PATA device#%d %s is found on ata port#%d.\n",
ap->port_no%PATA_DEV_NUM_PER_PORT,
sata_dev_desc[ap->port_no].vendor,
ap->port_no/PATA_DEV_NUM_PER_PORT);
}
static void bfin_ata_set_Feature_cmd(struct ata_port *ap, int dev)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 status = 0;
if (!(ap->dev_mask & (1 << dev)))
return;
bfin_dev_select(ap, dev);
write_atapi_register(base, ATA_REG_FEATURE, SETFEATURES_XFER);
write_atapi_register(base, ATA_REG_NSECT, ap->ata_mode);
write_atapi_register(base, ATA_REG_LBAL, 0);
write_atapi_register(base, ATA_REG_LBAM, 0);
write_atapi_register(base, ATA_REG_LBAH, 0);
write_atapi_register(base, ATA_REG_DEVICE, ATA_DEVICE_OBS);
write_atapi_register(base, ATA_REG_CMD, ATA_CMD_SET_FEATURES);
udelay(50);
msleep(150);
status = bfin_ata_busy_wait(ap, ATA_BUSY, 5000, 0);
if ((status & (ATA_BUSY | ATA_ERR))) {
printf("Error : status 0x%02x\n", status);
ap->dev_mask &= ~(1 << dev);
}
}
int scan_sata(int dev)
{
/* dev is the index of each ata device in the system. one PATA port
* contains 2 devices. one element in scan_done array indicates one
* PATA port. device connected to one PATA port is selected by
* bfin_dev_select() before access.
*/
struct ata_port *ap = &port[dev];
static int scan_done[(CONFIG_SYS_SATA_MAX_DEVICE+1)/PATA_DEV_NUM_PER_PORT];
if (scan_done[dev/PATA_DEV_NUM_PER_PORT])
return 0;
/* Check for attached device */
if (!bfin_ata_probe_port(ap)) {
if (bfin_softreset(ap)) {
/* soft reset failed, try a hard one */
bfin_ata_reset_port(ap);
if (bfin_softreset(ap))
scan_done[dev/PATA_DEV_NUM_PER_PORT] = 1;
} else {
scan_done[dev/PATA_DEV_NUM_PER_PORT] = 1;
}
}
if (scan_done[dev/PATA_DEV_NUM_PER_PORT]) {
/* Probe device and set xfer mode */
bfin_ata_identify(ap, dev%PATA_DEV_NUM_PER_PORT);
bfin_ata_set_Feature_cmd(ap, dev%PATA_DEV_NUM_PER_PORT);
init_part(&sata_dev_desc[dev]);
return 0;
}
printf("PATA device#%d is not present on ATA port#%d.\n",
ap->port_no%PATA_DEV_NUM_PER_PORT,
ap->port_no/PATA_DEV_NUM_PER_PORT);
return -1;
}
int init_sata(int dev)
{
struct ata_port *ap = &port[dev];
static u8 init_done;
int res = 1;
if (init_done)
return res;
init_done = 1;
switch (dev/PATA_DEV_NUM_PER_PORT) {
case 0:
ap->ioaddr.ctl_addr = ATAPI_CONTROL;
ap->ata_mode = CONFIG_BFIN_ATA_MODE;
break;
default:
printf("Tried to scan unknown port %d.\n", dev);
return res;
}
if (ap->ata_mode < XFER_PIO_0 || ap->ata_mode > XFER_PIO_4) {
ap->ata_mode = XFER_PIO_4;
printf("DMA mode is not supported. Set to PIO mode 4.\n");
}
ap->port_no = dev;
ap->ctl_reg = 0x8; /*Default value of control reg */
res = 0;
return res;
}
/* Read up to 255 sectors
*
* Returns sectors read
*/
static u8 do_one_read(struct ata_port *ap, u64 blknr, u8 blkcnt, u16 *buffer,
uchar lba48)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 sr = 0;
u8 status;
u16 err = 0;
if (!(bfin_check_status(ap) & ATA_DRDY)) {
printf("Device ata%d not ready\n", ap->port_no);
return 0;
}
/* Set up transfer */
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
write_atapi_register(base, ATA_REG_NSECT, 0);
write_atapi_register(base, ATA_REG_LBAL, (blknr >> 24) & 0xFF);
write_atapi_register(base, ATA_REG_LBAM, (blknr >> 32) & 0xFF);
write_atapi_register(base, ATA_REG_LBAH, (blknr >> 40) & 0xFF);
}
#endif
write_atapi_register(base, ATA_REG_NSECT, blkcnt);
write_atapi_register(base, ATA_REG_LBAL, (blknr >> 0) & 0xFF);
write_atapi_register(base, ATA_REG_LBAM, (blknr >> 8) & 0xFF);
write_atapi_register(base, ATA_REG_LBAH, (blknr >> 16) & 0xFF);
#ifdef CONFIG_LBA48
if (lba48) {
write_atapi_register(base, ATA_REG_DEVICE, ATA_LBA);
write_atapi_register(base, ATA_REG_CMD, ATA_CMD_PIO_READ_EXT);
} else
#endif
{
write_atapi_register(base, ATA_REG_DEVICE, ATA_LBA | ((blknr >> 24) & 0xF));
write_atapi_register(base, ATA_REG_CMD, ATA_CMD_PIO_READ);
}
status = bfin_ata_busy_wait(ap, ATA_BUSY, 500000, 1);
if (status & (ATA_BUSY | ATA_ERR)) {
printf("Device %d not responding status 0x%x.\n", ap->port_no, status);
err = read_atapi_register(base, ATA_REG_ERR);
printf("Error reg = 0x%x\n", err);
return sr;
}
while (blkcnt--) {
if (bfin_wait_for_irq(ap, 500)) {
printf("ata%u irq failed\n", ap->port_no);
return sr;
}
status = bfin_check_status(ap);
if (status & ATA_ERR) {
err = read_atapi_register(base, ATA_REG_ERR);
printf("ata%u error %d\n", ap->port_no, err);
return sr;
}
bfin_irq_clear(ap);
/* Read one sector */
read_atapi_data(base, ATA_SECTOR_WORDS, buffer);
buffer += ATA_SECTOR_WORDS;
sr++;
}
return sr;
}
ulong sata_read(int dev, ulong block, lbaint_t blkcnt, void *buff)
{
struct ata_port *ap = &port[dev];
ulong n = 0, sread;
u16 *buffer = (u16 *) buff;
u8 status = 0;
u64 blknr = (u64) block;
unsigned char lba48 = 0;
#ifdef CONFIG_LBA48
if (blknr > 0xfffffff) {
if (!sata_dev_desc[dev].lba48) {
printf("Drive doesn't support 48-bit addressing\n");
return 0;
}
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
bfin_dev_select(ap, dev%PATA_DEV_NUM_PER_PORT);
while (blkcnt > 0) {
if (blkcnt > 255)
sread = 255;
else
sread = blkcnt;
status = do_one_read(ap, blknr, sread, buffer, lba48);
if (status != sread) {
printf("Read failed\n");
return n;
}
blkcnt -= sread;
blknr += sread;
n += sread;
buffer += sread * ATA_SECTOR_WORDS;
}
return n;
}
ulong sata_write(int dev, ulong block, lbaint_t blkcnt, const void *buff)
{
struct ata_port *ap = &port[dev];
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
ulong n = 0;
u16 *buffer = (u16 *) buff;
unsigned char status = 0;
u64 blknr = (u64) block;
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr > 0xfffffff) {
if (!sata_dev_desc[dev].lba48) {
printf("Drive doesn't support 48-bit addressing\n");
return 0;
}
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
bfin_dev_select(ap, dev%PATA_DEV_NUM_PER_PORT);
while (blkcnt-- > 0) {
status = bfin_ata_busy_wait(ap, ATA_BUSY, 50000, 0);
if (status & ATA_BUSY) {
printf("ata%u failed to respond\n", ap->port_no);
return n;
}
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
write_atapi_register(base, ATA_REG_NSECT, 0);
write_atapi_register(base, ATA_REG_LBAL,
(blknr >> 24) & 0xFF);
write_atapi_register(base, ATA_REG_LBAM,
(blknr >> 32) & 0xFF);
write_atapi_register(base, ATA_REG_LBAH,
(blknr >> 40) & 0xFF);
}
#endif
write_atapi_register(base, ATA_REG_NSECT, 1);
write_atapi_register(base, ATA_REG_LBAL, (blknr >> 0) & 0xFF);
write_atapi_register(base, ATA_REG_LBAM, (blknr >> 8) & 0xFF);
write_atapi_register(base, ATA_REG_LBAH, (blknr >> 16) & 0xFF);
#ifdef CONFIG_LBA48
if (lba48) {
write_atapi_register(base, ATA_REG_DEVICE, ATA_LBA);
write_atapi_register(base, ATA_REG_CMD,
ATA_CMD_PIO_WRITE_EXT);
} else
#endif
{
write_atapi_register(base, ATA_REG_DEVICE,
ATA_LBA | ((blknr >> 24) & 0xF));
write_atapi_register(base, ATA_REG_CMD,
ATA_CMD_PIO_WRITE);
}
/*may take up to 5 sec */
status = bfin_ata_busy_wait(ap, ATA_BUSY, 50000, 0);
if ((status & (ATA_DRQ | ATA_BUSY | ATA_ERR)) != ATA_DRQ) {
printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
ap->port_no, (ulong) blknr, status);
return n;
}
write_atapi_data(base, ATA_SECTOR_WORDS, buffer);
bfin_check_altstatus(ap);
udelay(1);
++n;
++blknr;
buffer += ATA_SECTOR_WORDS;
}
return n;
}
|