1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
|
#include <common.h>
#include <command.h>
#include <AT91RM9200.h>
#include <net.h>
/* ----- Ethernet Buffer definitions ----- */
typedef struct {
unsigned long addr,size;
} rbf_t;
#define RBF_ADDR 0xfffffffc
#define RBF_OWNER (1<<0)
#define RBF_WRAP (1<<1)
#define RBF_BROADCAST (1<<31)
#define RBF_MULTICAST (1<<30)
#define RBF_UNICAST (1<<29)
#define RBF_EXTERNAL (1<<28)
#define RBF_UNKOWN (1<<27)
#define RBF_SIZE 0x07ff
#define RBF_LOCAL4 (1<<26)
#define RBF_LOCAL3 (1<<25)
#define RBF_LOCAL2 (1<<24)
#define RBF_LOCAL1 (1<<23)
#define RBF_FRAMEMAX 10
#define RBF_FRAMEMEM 0x200000
#define RBF_FRAMELEN 0x600
#define RBF_FRAMEBTD RBF_FRAMEMEM
#define RBF_FRAMEBUF (RBF_FRAMEMEM + RBF_FRAMEMAX*sizeof(rbf_t))
/* stolen from mii.h */
/* Generic MII registers. */
#define MII_BMCR 0x00 /* Basic mode control register */
#define MII_BMSR 0x01 /* Basic mode status register */
#define BMSR_JCD 0x0002 /* Jabber detected */
#define BMSR_LSTATUS 0x0004 /* Link status */
#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
#define MII_STS2_REG 17 /* Davicom specific */
#define MII_MDINTR_REG 21 /* Davicom specific */
#ifdef CONFIG_DRIVER_ETHER
#if (CONFIG_COMMANDS & CFG_CMD_NET)
AT91PS_EMAC p_mac;
int MII_ReadPhy(unsigned char addr, unsigned short *ret)
{
p_mac->EMAC_MAN = 0x60020000 | (addr << 18);
udelay(10000);
*ret = (unsigned short)p_mac->EMAC_MAN;
return 1;
}
int MII_GetLinkSpeed(void)
{
unsigned short stat1, stat2;
int ret;
if (!(ret = MII_ReadPhy(MII_BMSR, &stat1)))
return 0;
if (stat1 & BMSR_JCD)
{
#ifdef DEBUG
printf("MII: jabber condition detected\n");
#endif /*jabber detected re-read the register*/
}
if (!(ret = MII_ReadPhy(MII_BMSR, &stat1)))
return 0;
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
{
printf("MII: no Link\n");
return 0;
}
if (!(ret = MII_ReadPhy(MII_STS2_REG, &stat2)))
return 0;
if ((stat1 & BMSR_100FULL) && (stat2 & 0x8000) )
{
/* set MII for 100BaseTX and Full Duplex */
p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
#ifdef DEBUG
printf("MII: 100BaseTX and Full Duplex detected\n");
#endif
return 1;
}
else
if ((stat1 & BMSR_10FULL) && (stat2 & 0x2000))
{
/* set MII for 10BaseT and Full Duplex */
p_mac->EMAC_CFG = (p_mac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD));
#ifdef DEBUG
printf("MII: 10BaseT and Full Duplex detected\n");
#endif
return 1;
}
else
if ((stat1 & BMSR_100HALF) && (stat2 & 0x4000))
{
/* set MII for 100BaseTX and Half Duplex */
p_mac->EMAC_CFG = (p_mac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD));
#ifdef DEBUG
printf("MII: 100BaseTX and Hall Duplex detected\n");
#endif
return 1;
}
else
if ((stat1 & BMSR_10HALF) && (stat2 & 0x1000))
{
/*set MII for 10BaseT and Half Duplex */
p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
#ifdef DEBUG
printf("MII: 10BaseT and Hall Duplex detected\n");
#endif
return 1;
}
return 0;
}
int MDIO_StartupPhy(void)
{
int ret;
if(p_mac->EMAC_SR & AT91C_EMAC_LINK)
{
printf("MDIO_StartupPhy: no link\n");
return 0;
};
p_mac->EMAC_CTL |= AT91C_EMAC_MPE;
ret = MII_GetLinkSpeed();
if (ret == 0)
{
printf("MDIO_StartupPhy: MII_GetLinkSpeed failed\n");
ret = 0;
}
else
{
ret = 1;
}
p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE;
return ret;
}
rbf_t* rbfdt;
rbf_t* rbfp;
int eth_init( bd_t *bd )
{
int ret;
int i;
p_mac = AT91C_BASE_EMAC;
*AT91C_PIOA_PDR = AT91C_PA16_EMDIO |
AT91C_PA15_EMDC | AT91C_PA14_ERXER | AT91C_PA13_ERX1 | AT91C_PA12_ERX0 |
AT91C_PA11_ECRS_ECRSDV | AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN |
AT91C_PA7_ETXCK_EREFCK; /* PIO Disable Register */
*AT91C_PIOB_PDR = AT91C_PB25_EF100 |
AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV | AT91C_PB16_ERX3 |
AT91C_PB15_ERX2 | AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
*AT91C_PIOB_BSR = AT91C_PB25_EF100 |
AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV | AT91C_PB16_ERX3 |
AT91C_PB15_ERX2 | AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2; /* Select B Register */
*AT91C_PMC_PCER = 1 << AT91C_ID_EMAC; /* Peripheral Clock Enable Register */
p_mac->EMAC_CFG |= AT91C_EMAC_CSR; /* Clear statistics */
rbfdt=(rbf_t *)RBF_FRAMEBTD;
for(i = 0; i < RBF_FRAMEMAX; i++)
{
rbfdt[i].addr=RBF_FRAMEBUF+RBF_FRAMELEN*i;
rbfdt[i].size=0;
}
rbfdt[RBF_FRAMEMAX-1].addr|=RBF_WRAP;
rbfp=&rbfdt[0];
if (!(ret = MDIO_StartupPhy()))
{
printf("MAC: error during MII initialization\n");
return 0;
}
p_mac->EMAC_SA2L = (bd->bi_enetaddr[3] << 24) | (bd->bi_enetaddr[2] << 16)
| (bd->bi_enetaddr[1] << 8) | (bd->bi_enetaddr[0]);
p_mac->EMAC_SA2H = (bd->bi_enetaddr[5] << 8) | (bd->bi_enetaddr[4]);
p_mac->EMAC_RBQP = (long)(&rbfdt[0]);
p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC | AT91C_EMAC_RMII) & ~AT91C_EMAC_CLK;
p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE ;
return 0;
}
int eth_send(volatile void *packet, int length)
{
while(!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ))
;
p_mac->EMAC_TAR = (long)packet;
p_mac->EMAC_TCR = length;
while(p_mac->EMAC_TCR & 0x7ff)
;
p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
return 0;
}
int eth_rx(void)
{
int size;
if(!(rbfp->addr & RBF_OWNER))
return 0;
size=rbfp->size & RBF_SIZE;
NetReceive((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
rbfp->addr &= ~RBF_OWNER;
if(rbfp->addr & RBF_WRAP)
rbfp = &rbfdt[0];
else
rbfp++;
p_mac->EMAC_RSR |= AT91C_EMAC_REC;
return size;
}
void eth_halt( void )
{};
#endif
#endif
|
