1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
|
/*
* Copyright 2004 Freescale Semiconductor.
* Copyright (C) 2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* PCI Configuration space access support for MPC85xx PCI Bridge
*/
#include <common.h>
#include <asm/cpm_85xx.h>
#include <pci.h>
#if defined(CONFIG_PCI)
void
pci_mpc85xx_init(struct pci_controller *hose)
{
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
u16 reg16;
hose->first_busno = 0;
hose->last_busno = 0xff;
pci_set_region(hose->regions + 0,
CFG_PCI1_MEM_BASE,
CFG_PCI1_MEM_PHYS,
CFG_PCI1_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
CFG_PCI1_IO_BASE,
CFG_PCI1_IO_PHYS,
CFG_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 2;
pci_setup_indirect(hose,
(CFG_IMMR+0x8000),
(CFG_IMMR+0x8004));
pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
*/
pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
pcix->potear1 = 0x00000000;
pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
pcix->powar1 = 0x8004401c; /* 512M MEM space */
pcix->potar2 = 0x00000000;
pcix->potear2 = 0x00000000;
pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
pcix->powar2 = 0x80088017; /* 16M IO space */
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
pcix->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
* Snoop R/W, 2G */
/*
* Hose scan.
*/
pci_register_hose(hose);
#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
/*
* This is a SW workaround for an apparent HW problem
* in the PCI controller on the MPC85555/41 CDS boards.
* The first config cycle must be to a valid, known
* device on the PCI bus in order to trick the PCI
* controller state machine into a known valid state.
* Without this, the first config cycle has the chance
* of hanging the controller permanently, just leaving
* it in a semi-working state, or leaving it working.
*
* Pick on the Tundra, Device 17, to get it right.
*/
{
u8 header_type;
pci_hose_read_config_byte(hose,
PCI_BDF(0,17,0),
PCI_HEADER_TYPE,
&header_type);
}
#endif
hose->last_busno = pci_hose_scan(hose);
}
#endif /* CONFIG_PCI */
|
