1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
/*
* pinmux setup for siemens dxr2 board
*
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* u-boot:/board/ti/am335x/mux.c
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
#include "board.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
{-1},
};
static struct module_pin_mux uart3_pin_mux[] = {
{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
{-1},
};
static struct module_pin_mux i2c0_pin_mux[] = {
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
{-1},
};
static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
{-1},
};
static struct module_pin_mux gpios_pin_mux[] = {
/* DFU button GPIO0_27*/
{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
{OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */
{OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */
{-1},
};
static struct module_pin_mux ethernet_pin_mux[] = {
{OFFSET(mii1_col), (MODE(3) | RXACTIVE)},
{OFFSET(mii1_crs), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_txen), (MODE(1))},
{OFFSET(mii1_rxdv), (MODE(3) | RXACTIVE)},
{OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)},
{OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)},
{OFFSET(mii1_txd1), (MODE(1))},
{OFFSET(mii1_txd0), (MODE(1))},
{OFFSET(mii1_txclk), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_rxclk), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_rxd3), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_rxd2), (MODE(1))},
{OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)},
{OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)},
{OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)},
{OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)},
{-1},
};
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
}
void enable_uart3_pin_mux(void)
{
configure_module_pin_mux(uart3_pin_mux);
}
void enable_i2c0_pin_mux(void)
{
configure_module_pin_mux(i2c0_pin_mux);
}
void enable_board_pin_mux(void)
{
enable_uart3_pin_mux();
configure_module_pin_mux(nand_pin_mux);
configure_module_pin_mux(ethernet_pin_mux);
configure_module_pin_mux(gpios_pin_mux);
}
|
