1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
|
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_OMAP1610)
#include <./configs/omap1510.h>
#endif
#ifdef CONFIG_CS_AUTOBOOT
unsigned long omap_flash_base;
#endif
void flash__init (void);
void ether__init (void);
void set_muxconf_regs (void);
void peripheral_power_enable (void);
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
static inline void delay (unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0" (loops));
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of OMAP 1510-Board */
/* to be changed for OMAP 1610 Board */
gd->bd->bi_arch_number = 234;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x10000100;
/* Configure MUX settings */
set_muxconf_regs ();
peripheral_power_enable ();
/* this speeds up your boot a quite a bit. However to make it
* work, you need make sure your kernel startup flush bug is fixed.
* ... rkw ...
*/
icache_enable ();
flash__init ();
ether__init ();
return 0;
}
int misc_init_r (void)
{
/* currently empty */
return (0);
}
/******************************
Routine:
Description:
******************************/
void flash__init (void)
{
#define EMIFS_GlB_Config_REG 0xfffecc0c
unsigned int regval;
#ifdef CONFIG_CS_AUTOBOOT
/* Check swapping of CS0 and CS3, set flash base accordingly */
omap_flash_base = ((*((u32 *)OMAP_EMIFS_CONFIG_REG) & 0x02) == 0) ?
PHYS_FLASH_1_BM0 : PHYS_FLASH_1_BM1;
#endif
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
/* Turn off write protection for flash devices. */
regval = regval | 0x0001;
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
}
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
#define ETH_CONTROL_REG 0x0400030b
#ifdef CONFIG_H2_OMAP1610
#define LAN_RESET_REGISTER 0x0400001c
/* The debug board on which the lan chip resides may not be powered
* ON at the same time as the OMAP chip. So wait in a loop until the
* lan reset register (on the debug board) is available (powered on)
* and reset the lan chip.
*/
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
do {
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001;
udelay (3);
} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001);
do {
*((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000;
udelay (3);
} while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000);
#endif
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
udelay (3);
}
/******************************
Routine:
Description:
******************************/
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
/******************************************************
Routine: set_muxconf_regs
Description: Setting up the configuration Mux registers
specific to the hardware
*******************************************************/
void set_muxconf_regs (void)
{
volatile unsigned int *MuxConfReg;
/* set each registers to its reset value; */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
/* setup for UART1 */
*MuxConfReg &= ~(0x02000000); /* bit 25 */
/* setup for UART2 */
*MuxConfReg &= ~(0x01000000); /* bit 24 */
/* Disable Uwire CS Hi-Z */
*MuxConfReg |= 0x08000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
/*setup mux for UART3 */
*MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */
*MuxConfReg &= ~0x0000003e;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
/* Disable Uwire CS Hi-Z */
*MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
/* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */
/* hardware will actually use TX and RTS based on bit 25 in */
/* FUNC_MUX_CTRL_0. I told you this thing was screwy! */
*MuxConfReg |= 0x00201000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
/* setup for UART2 */
/* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */
/* hardware will actually use TX and RTS based on bit 24 in */
/* FUNC_MUX_CTRL_0. */
*MuxConfReg |= 0x09000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
*MuxConfReg = 0x00000000;
/* mux setup for SD/MMC driver */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
*MuxConfReg &= 0xFFFE0FFF;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
/* bit 13 for MMC2 XOR_CLK */
*MuxConfReg &= ~(0x00002000);
/* bit 29 for UART 1 */
*MuxConfReg &= ~(0x00002000);
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
*MuxConfReg |= 0x000C0000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
*MuxConfReg &= ~(0x00000070);
*MuxConfReg &= ~(0x00000008);
*MuxConfReg |= 0x00000003;
*MuxConfReg |= 0x00000180;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
/* bit 17, software controls VBUS */
*MuxConfReg &= ~(0x00020000);
/* Enable USB 48 and 12M clocks */
*MuxConfReg |= 0x00000200;
*MuxConfReg &= ~(0x00000180);
/*2.75V for MMCSDIO1 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
*MuxConfReg = 0x00001FE7;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
*MuxConfReg = 0x00000000;
/* Turn on UART2 48 MHZ clock */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
*MuxConfReg |= 0x40000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
/* setup for USB VBus detection OMAP161x */
*MuxConfReg |= 0x00040000; /* bit 18 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
/* PullUps for SD/MMC driver */
*MuxConfReg |= ~(0xFFFE0FFF);
MuxConfReg =
(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
*MuxConfReg = COMP_MODE_ENABLE;
}
/******************************************************
Routine: peripheral_power_enable
Description: Enable the power for UART1
*******************************************************/
void peripheral_power_enable (void)
{
#define UART1_48MHZ_ENABLE ((unsigned short)0x0200)
#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834)
*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
}
|
