1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
static void flash__init (void);
static void ether__init (void);
static inline void delay (unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0" (loops));
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of OMAP 1510-Board */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x10000100;
/* kk - this speeds up your boot a quite a bit. However to make it
* work, you need make sure your kernel startup flush bug is fixed.
* ... rkw ...
*/
icache_enable ();
flash__init ();
ether__init ();
return 0;
}
int misc_init_r (void)
{
/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
/* setup gpio direction to match board (no floats!) */
/**gdir = 0xCFF9; */
/**mdir = 0x103F; */
return (0);
}
/******************************
Routine:
Description:
******************************/
static void flash__init (void)
{
#define CS0_CHIP_SELECT_REG 0xfffecc10
#define CS3_CHIP_SELECT_REG 0xfffecc1c
#define EMIFS_GlB_Config_REG 0xfffecc0c
{
unsigned int regval;
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
regval = regval | 0x0001; /* Turn off write protection for flash devices. */
if (regval & 0x0002) {
regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
}
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
}
}
/******************************
Routine:
Description:
******************************/
static void ether__init (void)
{
#define ETH_CONTROL_REG 0x0800000b
/* take the Ethernet controller out of reset and wait
* for the EEPROM load to complete.
*/
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
udelay (3);
}
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
|
