path: root/board/mpc8349emds/mpc8349emds.c

/*
 * (C) Copyright 2006
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 */

#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
#include <command.h>
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
#endif

int fixed_sdram(void);
void sdram_init(void);

#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
void ddr_enable_ecc(unsigned int dram_size);
#endif

int board_early_init_f (void)
{
	volatile u8* bcsr = (volatile u8*)CFG_BCSR;

	/* Enable flash write */
	bcsr[1] &= ~0x01;

#ifdef CFG_USE_MPC834XSYS_USB_PHY
	/* Use USB PHY on SYS board */
	bcsr[5] |= 0x02;
#endif

	return 0;
}

#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)

long int initdram (int board_type)
{
	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
	u32 msize = 0;

	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
		return -1;

	puts("Initializing\n");

	/* DDR SDRAM - Main SODIMM */
	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
	msize = spd_sdram();
#else
	msize = fixed_sdram();
#endif
	/*
	 * Initialize SDRAM if it is on local bus.
	 */
	sdram_init();

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	/*
	 * Initialize and enable DDR ECC.
	 */
	ddr_enable_ecc(msize * 1024 * 1024);
#endif
	puts("   DDR RAM: ");
	/* return total bus SDRAM size(bytes)  -- DDR */
	return (msize * 1024 * 1024);
}

#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
 *  fixed sdram init -- doesn't use serial presence detect.
 ************************************************************************/
int fixed_sdram(void)
{
	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
	u32 msize = 0;
	u32 ddr_size;
	u32 ddr_size_log2;

	msize = CFG_DDR_SIZE;
	for (ddr_size = msize << 20, ddr_size_log2 = 0;
	     (ddr_size > 1);
	     ddr_size = ddr_size>>1, ddr_size_log2++) {
		if (ddr_size & 1) {
			return -1;
		}
	}
	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);

#if (CFG_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
	im->ddr.csbnds[2].csbnds = 0x0000000f;
	im->ddr.cs_config[2] = CFG_DDR_CONFIG;

	/* currently we use only one CS, so disable the other banks */
	im->ddr.cs_config[0] = 0;
	im->ddr.cs_config[1] = 0;
	im->ddr.cs_config[3] = 0;

	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;

	im->ddr.sdram_cfg =
		SDRAM_CFG_SREN
#if defined(CONFIG_DDR_2T_TIMING)
		| SDRAM_CFG_2T_EN
#endif
		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
#if defined (CONFIG_DDR_32BIT)
	/* for 32-bit mode burst length is 8 */
	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
#endif
	im->ddr.sdram_mode = CFG_DDR_MODE;

	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
	udelay(200);

	/* enable DDR controller */
	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
	return msize;
}
#endif/*!CFG_SPD_EEPROM*/


int checkboard (void)
{
	puts("Board: Freescale MPC8349EMDS\n");
	return 0;
}

/*
 * if MPC8349EMDS is soldered with SDRAM
 */
#if defined(CFG_BR2_PRELIM)  \
	&& defined(CFG_OR2_PRELIM) \
	&& defined(CFG_LBLAWBAR2_PRELIM) \
	&& defined(CFG_LBLAWAR2_PRELIM)
/*
 * Initialize SDRAM memory on the Local Bus.
 */

void sdram_init(void)
{
	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
	volatile lbus83xx_t *lbc= &immap->lbus;
	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;

	puts("\n   SDRAM on Local Bus: ");
	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

	/*
	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
	 */

	/* setup mtrpt, lsrt and lbcr for LB bus */
	lbc->lbcr = CFG_LBC_LBCR;
	lbc->mrtpr = CFG_LBC_MRTPR;
	lbc->lsrt = CFG_LBC_LSRT;
	asm("sync");

	/*
	 * Configure the SDRAM controller Machine Mode Register.
	 */
	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */

	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
	asm("sync");
	*sdram_addr = 0xff;
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
	asm("sync");
	/*1 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*2 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*3 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*4 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*5 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*6 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*7 times*/
	*sdram_addr = 0xff;
	udelay(100);
	/*8 times*/
	*sdram_addr = 0xff;
	udelay(100);

	/* 0x58636733; mode register write operation */
	lbc->lsdmr = CFG_LBC_LSDMR_4;
	asm("sync");
	*sdram_addr = 0xff;
	udelay(100);

	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
	asm("sync");
	*sdram_addr = 0xff;
	udelay(100);
}
#else
void sdram_init(void)
{
	put("SDRAM on Local Bus is NOT available!\n");
}
#endif

#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
/*
 * ECC user commands
 */
void ecc_print_status(void)
{
	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
	volatile ddr83xx_t *ddr = &immap->ddr;

	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");

	/* Interrupts */
	printf("Memory Error Interrupt Enable:\n");
	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
			(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
	printf("  Single-Bit Error Interrupt Enable: %d\n",
			(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
	printf("  Memory Select Error Interrupt Enable: %d\n\n",
			(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);

	/* Error disable */
	printf("Memory Error Disable:\n");
	printf("  Multiple-Bit Error Disable: %d\n",
			(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
	printf("  Sinle-Bit Error Disable: %d\n",
			(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
	printf("  Memory Select Error Disable: %d\n\n",
			(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);

	/* Error injection */
	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
			ddr->data_err_inject_hi, ddr->data_err_inject_lo);

	printf("Memory Data Path Error Injection Mask ECC:\n");
	printf("  ECC Mirror Byte: %d\n",
			(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
	printf("  ECC Injection Enable: %d\n",
			(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
	printf("  ECC Error Injection Mask: 0x%02x\n\n",
			ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);

	/* SBE counter/threshold */
	printf("Memory Single-Bit Error Management (0..255):\n");
	printf("  Single-Bit Error Threshold: %d\n",
			(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
	printf("  Single-Bit Error Counter: %d\n\n",
			(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);

	/* Error detect */
	printf("Memory Error Detect:\n");
	printf("  Multiple Memory Errors: %d\n",
			(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
	printf("  Multiple-Bit Error: %d\n",
			(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
	printf("  Single-Bit Error: %d\n",
			(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
	printf("  Memory Select Error: %d\n\n",
			(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);

	/* Capture data */
	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
			ddr->capture_data_hi, ddr->capture_data_lo);
	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
		ddr->capture_ecc & CAPTURE_ECC_ECE);

	printf("Memory Error Attributes Capture:\n");
	printf("  Data Beat Number: %d\n",
			(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
	printf("  Transaction Size: %d\n",
			(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
	printf("  Transaction Source: %d\n",
			(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
	printf("  Transaction Type: %d\n",
			(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
	printf("  Error Information Valid: %d\n\n",
			ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
}

int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
	volatile ddr83xx_t *ddr = &immap->ddr;
	volatile u32 val;
	u64 *addr, count, val64;
	register u64 *i;

	if (argc > 4) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	if (argc == 2) {
		if (strcmp(argv[1], "status") == 0) {
			ecc_print_status();
			return 0;
		} else if (strcmp(argv[1], "captureclear") == 0) {
			ddr->capture_address = 0;
			ddr->capture_data_hi = 0;
			ddr->capture_data_lo = 0;
			ddr->capture_ecc = 0;
			ddr->capture_attributes = 0;
			return 0;
		}
	}

	if (argc == 3) {
		if (strcmp(argv[1], "sbecnt") == 0) {
			val = simple_strtoul(argv[2], NULL, 10);
			if (val > 255) {
				printf("Incorrect Counter value, should be 0..255\n");
				return 1;
			}

			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);

			ddr->err_sbe = val;
			return 0;
		} else if (strcmp(argv[1], "sbethr") == 0) {
			val = simple_strtoul(argv[2], NULL, 10);
			if (val > 255) {
				printf("Incorrect Counter value, should be 0..255\n");
				return 1;
			}

			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);

			ddr->err_sbe = val;
			return 0;
		} else if (strcmp(argv[1], "errdisable") == 0) {
			val = ddr->err_disable;

			if (strcmp(argv[2], "+sbe") == 0) {
				val |= ECC_ERROR_DISABLE_SBED;
			} else if (strcmp(argv[2], "+mbe") == 0) {
				val |= ECC_ERROR_DISABLE_MBED;
			} else if (strcmp(argv[2], "+mse") == 0) {
				val |= ECC_ERROR_DISABLE_MSED;
			} else if (strcmp(argv[2], "+all") == 0) {
				val |= (ECC_ERROR_DISABLE_SBED |
					ECC_ERROR_DISABLE_MBED |
					ECC_ERROR_DISABLE_MSED);
			} else if (strcmp(argv[2], "-sbe") == 0) {
				val &= ~ECC_ERROR_DISABLE_SBED;
			} else if (strcmp(argv[2], "-mbe") == 0) {
				val &= ~ECC_ERROR_DISABLE_MBED;
			} else if (strcmp(argv[2], "-mse") == 0) {
				val &= ~ECC_ERROR_DISABLE_MSED;
			} else if (strcmp(argv[2], "-all") == 0) {
				val &= ~(ECC_ERROR_DISABLE_SBED |
					ECC_ERROR_DISABLE_MBED |
					ECC_ERROR_DISABLE_MSED);
			} else {
				printf("Incorrect err_disable field\n");
				return 1;
			}

			ddr->err_disable = val;
			__asm__ __volatile__ ("sync");
			__asm__ __volatile__ ("isync");
			return 0;
		} else if (strcmp(argv[1], "errdetectclr") == 0) {
			val = ddr->err_detect;

			if (strcmp(argv[2], "mme") == 0) {
				val |= ECC_ERROR_DETECT_MME;
			} else if (strcmp(argv[2], "sbe") == 0) {
				val |= ECC_ERROR_DETECT_SBE;
			} else if (strcmp(argv[2], "mbe") == 0) {
				val |= ECC_ERROR_DETECT_MBE;
			} else if (strcmp(argv[2], "mse") == 0) {
				val |= ECC_ERROR_DETECT_MSE;
			} else if (strcmp(argv[2], "all") == 0) {
				val |= (ECC_ERROR_DETECT_MME |
					ECC_ERROR_DETECT_MBE |
					ECC_ERROR_DETECT_SBE |
					ECC_ERROR_DETECT_MSE);
			} else {
				printf("Incorrect err_detect field\n");
				return 1;
			}

			ddr->err_detect = val;
			return 0;
		} else if (strcmp(argv[1], "injectdatahi") == 0) {
			val = simple_strtoul(argv[2], NULL, 16);

			ddr->data_err_inject_hi = val;
			return 0;
		} else if (strcmp(argv[1], "injectdatalo") == 0) {
			val = simple_strtoul(argv[2], NULL, 16);

			ddr->data_err_inject_lo = val;
			return 0;
		} else if (strcmp(argv[1], "injectecc") == 0) {
			val = simple_strtoul(argv[2], NULL, 16);
			if (val > 0xff) {
				printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
				return 1;
			}
			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);

			ddr->ecc_err_inject = val;
			return 0;
		} else if (strcmp(argv[1], "inject") == 0) {
			val = ddr->ecc_err_inject;

			if (strcmp(argv[2], "en") == 0)
				val |= ECC_ERR_INJECT_EIEN;
			else if (strcmp(argv[2], "dis") == 0)
				val &= ~ECC_ERR_INJECT_EIEN;
			else
				printf("Incorrect command\n");

			ddr->ecc_err_inject = val;
			__asm__ __volatile__ ("sync");
			__asm__ __volatile__ ("isync");
			return 0;
		} else if (strcmp(argv[1], "mirror") == 0) {
			val = ddr->ecc_err_inject;

			if (strcmp(argv[2], "en") == 0)
				val |= ECC_ERR_INJECT_EMB;
			else if (strcmp(argv[2], "dis") == 0)
				val &= ~ECC_ERR_INJECT_EMB;
			else
				printf("Incorrect command\n");

			ddr->ecc_err_inject = val;
			return 0;
		}
	}

	if (argc == 4) {
		if (strcmp(argv[1], "test") == 0) {
			addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
			count = simple_strtoul(argv[3], NULL, 16);

			if ((u32)addr % 8) {
				printf("Address not alligned on double word boundary\n");
				return 1;
			}

			disable_interrupts();
			icache_disable();

			for (i = addr; i < addr + count; i++) {
				/* enable injects */
				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
				__asm__ __volatile__ ("sync");
				__asm__ __volatile__ ("isync");

				/* write memory location injecting errors */
				*i = 0x1122334455667788ULL;
				__asm__ __volatile__ ("sync");

				/* disable injects */
				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
				__asm__ __volatile__ ("sync");
				__asm__ __volatile__ ("isync");

				/* read data, this generates ECC error */
				val64 = *i;
				__asm__ __volatile__ ("sync");

				/* disable errors for ECC */
				ddr->err_disable |= ~ECC_ERROR_ENABLE;
				__asm__ __volatile__ ("sync");
				__asm__ __volatile__ ("isync");

				/* re-initialize memory, write the location again
				 * NOT injecting errors this time */
				*i = 0xcafecafecafecafeULL;
				__asm__ __volatile__ ("sync");

				/* enable errors for ECC */
				ddr->err_disable &= ECC_ERROR_ENABLE;
				__asm__ __volatile__ ("sync");
				__asm__ __volatile__ ("isync");
			}

			icache_enable();
			enable_interrupts();

			return 0;
		}
	}

	printf ("Usage:\n%s\n", cmdtp->usage);
	return 1;
}

U_BOOT_CMD(
	ecc,     4,     0,      do_ecc,
	"ecc     - support for DDR ECC features\n",
	"status              - print out status info\n"
	"ecc captureclear        - clear capture regs data\n"
	"ecc sbecnt <val>        - set Single-Bit Error counter\n"
	"ecc sbethr <val>        - set Single-Bit Threshold\n"
	"ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
	"  [-|+]sbe - Single-Bit Error\n"
	"  [-|+]mbe - Multiple-Bit Error\n"
	"  [-|+]mse - Memory Select Error\n"
	"  [-|+]all - all errors\n"
	"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
	"  mme - Multiple Memory Errors\n"
	"  sbe - Single-Bit Error\n"
	"  mbe - Multiple-Bit Error\n"
	"  mse - Memory Select Error\n"
	"  all - all errors\n"
	"ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
	"ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
	"ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
	"ecc inject <en|dis>    - enable/disable error injection\n"
	"ecc mirror <en|dis>    - enable/disable mirror byte\n"
	"ecc test <addr> <cnt>  - test mem region:\n"
	"  - enables injects\n"
	"  - writes pattern injecting errors\n"
	"  - disables injects\n"
	"  - reads pattern back, generates error\n"
	"  - re-inits memory"
);
#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */

#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
	u32 *p;
	int len;

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
	ft_cpu_setup(blob, bd);

	p = ft_get_prop(blob, "/memory/reg", &len);
	if (p != NULL) {
		*p++ = cpu_to_be32(bd->bi_memstart);
		*p = cpu_to_be32(bd->bi_memsize);
	}
}
#endif