1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
|
/*
* Copyright (C) 2006 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
#include <asm/arch/portmux.h>
#include <atmel_lcdc.h>
#include <lcd.h>
#include "../../../cpu/at32ap/hsmc3.h"
#if defined(CONFIG_LCD)
/* 480x272x16 @ 72 Hz */
vidinfo_t panel_info = {
.vl_col = 480, /* Number of columns */
.vl_row = 272, /* Number of rows */
.vl_clk = 10000000, /* pixel clock in ps */
.vl_sync = ATMEL_LCDC_INVCLK_INVERTED |
ATMEL_LCDC_INVLINE_INVERTED |
ATMEL_LCDC_INVFRAME_INVERTED,
.vl_bpix = LCD_COLOR16, /* Bits per pixel, BPP = 2^n */
.vl_tft = 1, /* 0 = passive, 1 = TFT */
.vl_hsync_len = 42, /* Length of horizontal sync */
.vl_left_margin = 1, /* Time from sync to picture */
.vl_right_margin = 1, /* Time from picture to sync */
.vl_vsync_len = 1, /* Length of vertical sync */
.vl_upper_margin = 12, /* Time from sync to picture */
.vl_lower_margin = 1, /* Time from picture to sync */
.mmio = LCDC_BASE, /* Memory mapped registers */
};
void lcd_enable(void)
{
}
void lcd_disable(void)
{
}
#endif
DECLARE_GLOBAL_DATA_PTR;
static const struct sdram_config sdram_config = {
.data_bits = SDRAM_DATA_16BIT,
.row_bits = 13,
.col_bits = 9,
.bank_bits = 2,
.cas = 3,
.twr = 2,
.trc = 6,
.trp = 2,
.trcd = 2,
.tras = 6,
.txsr = 6,
/* 15.6 us */
.refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
};
int board_early_init_f(void)
{
/* Enable SDRAM in the EBI mux */
hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
/* Enable 26 address bits and NCS2 */
portmux_enable_ebi(16, 26, PORTMUX_EBI_CS(2), PORTMUX_DRIVE_HIGH);
portmux_enable_usart1(PORTMUX_DRIVE_MIN);
/* de-assert "force sys reset" pin */
portmux_select_gpio(PORTMUX_PORT_D, 1 << 15,
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
/* init custom i/o */
/* cpu type inputs */
portmux_select_gpio(PORTMUX_PORT_E, (1 << 19) | (1 << 20) | (1 << 23),
PORTMUX_DIR_INPUT);
/* main board type inputs */
portmux_select_gpio(PORTMUX_PORT_B, (1 << 19) | (1 << 29),
PORTMUX_DIR_INPUT);
/* DEBUG input (use weak pullup) */
portmux_select_gpio(PORTMUX_PORT_E, 1 << 21,
PORTMUX_DIR_INPUT | PORTMUX_PULL_UP);
/* are we suppressing the console ? */
if (gpio_get_value(GPIO_PIN_PE(21)) == 1)
gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
/* reset phys */
portmux_select_gpio(PORTMUX_PORT_E, 1 << 24, PORTMUX_DIR_INPUT);
portmux_select_gpio(PORTMUX_PORT_C, 1 << 18,
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
udelay(5000);
/* release phys reset */
gpio_set_value(GPIO_PIN_PC(18), 0); /* PHY RESET (Release) */
/* setup Data Flash chip select (NCS2) */
hsmc3_writel(MODE2, 0x20121003);
hsmc3_writel(CYCLE2, 0x000a0009);
hsmc3_writel(PULSE2, 0x0a060806);
hsmc3_writel(SETUP2, 0x00030102);
/* setup FRAM chip select (NCS3) */
hsmc3_writel(MODE3, 0x10120001);
hsmc3_writel(CYCLE3, 0x001e001d);
hsmc3_writel(PULSE3, 0x08040704);
hsmc3_writel(SETUP3, 0x02050204);
#if defined(CONFIG_MACB)
/* init macb0 pins */
portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
#endif
#if defined(CONFIG_MMC)
portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
#endif
#if defined(CONFIG_LCD)
portmux_enable_lcdc(1);
#endif
return 0;
}
phys_size_t initdram(int board_type)
{
unsigned long expected_size;
unsigned long actual_size;
void *sdram_base;
sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
return actual_size;
}
int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
gd->bd->bi_phy_id[1] = 0x03;
return 0;
}
int board_postclk_init(void)
{
/* Use GCLK0 as 10MHz output */
gclk_enable_output(0, PORTMUX_DRIVE_LOW);
gclk_set_rate(0, GCLK_PARENT_OSC0, 10000000);
return 0;
}
/* SPI chip select control */
#ifdef CONFIG_ATMEL_SPI
#include <spi.h>
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return (bus == 0) && (cs == 0);
}
void spi_cs_activate(struct spi_slave *slave)
{
}
void spi_cs_deactivate(struct spi_slave *slave)
{
}
#endif /* CONFIG_ATMEL_SPI */
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bi)
{
macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
return 0;
}
#endif
|
