1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
/*
* Memory sub-system initialization code for INCA-IP development board.
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#define EBU_MODUL_BASE 0xB8000200
#define EBU_CLC(value) 0x0000(value)
#define EBU_CON(value) 0x0010(value)
#define EBU_ADDSEL0(value) 0x0020(value)
#define EBU_ADDSEL1(value) 0x0024(value)
#define EBU_ADDSEL2(value) 0x0028(value)
#define EBU_BUSCON0(value) 0x0060(value)
#define EBU_BUSCON1(value) 0x0064(value)
#define EBU_BUSCON2(value) 0x0068(value)
#define MC_MODUL_BASE 0xBF800000
#define MC_ERRCAUSE(value) 0x0100(value)
#define MC_ERRADDR(value) 0x0108(value)
#define MC_IOGP(value) 0x0800(value)
#define MC_SELFRFSH(value) 0x0A00(value)
#define MC_CTRLENA(value) 0x1000(value)
#define MC_MRSCODE(value) 0x1008(value)
#define MC_CFGDW(value) 0x1010(value)
#define MC_CFGPB0(value) 0x1018(value)
#define MC_LATENCY(value) 0x1038(value)
#define MC_TREFRESH(value) 0x1040(value)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
#define CGU_MODUL_BASE 0xBF107000
#define CGU_PLL1CR(value) 0x0008(value)
#define CGU_DIVCR(value) 0x0010(value)
#define CGU_MUXCR(value) 0x0014(value)
#define CGU_PLL1SR(value) 0x000C(value)
#endif
.globl memsetup
memsetup:
/* EBU Initialization for the Flash CS0 and CS2.
*/
li t0, EBU_MODUL_BASE
li t1, 0xA0000041
sw t1, EBU_ADDSEL0(t0)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
li t1, 0xA841417E
sw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
sw t1, EBU_BUSCON2(t0)
#else /* 100 MHz */
lw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
sw t1, EBU_BUSCON2(t0)
#endif
li t1, 0xA0800041
sw t1, EBU_ADDSEL2(t0)
/* Need to initialize CS1 too, so as to to prevent overlapping with
* Flash bank 1.
*/
li t1, 0xBE0000F1
sw t1, EBU_ADDSEL1(t0)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
li t1, 0x684143FD
#else /* 100 MHz */
li t1, 0x684142BD
#endif
sw t1, EBU_BUSCON1(t0)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
li t0, CGU_MODUL_BASE
li t1, 0x80000017
sw t1, CGU_DIVCR(t0)
li t1, 0xC00B0001
sw t1, CGU_PLL1CR(t0)
lui t2, 0x8000
b1:
lw t1, CGU_PLL1SR(t0)
and t1, t1, t2
beq t1, zero, b1
li t1, 0x80000001
sw t1, CGU_MUXCR(t0)
#endif
/* SDRAM Initialization.
*/
li t0, MC_MODUL_BASE
/* Clear Error log registers */
sw zero, MC_ERRCAUSE(t0)
sw zero, MC_ERRADDR(t0)
/* Set clock ratio to 1:1 */
li t1, 0x03 /* clkrat=1:1, rddel=3 */
sw t1, MC_IOGP(t0)
/* Clear Power-down registers */
sw zero, MC_SELFRFSH(t0)
/* Set CAS Latency */
li t1, 0x00000020 /* CL = 2 */
sw t1, MC_MRSCODE(t0)
/* Set word width to 16 bit */
li t1, 0x2
sw t1, MC_CFGDW(t0)
/* Set CS0 to SDRAM parameters */
li t1, 0x000014C9
sw t1, MC_CFGPB0(t0)
/* Set SDRAM latency parameters */
li t1, 0x00026325 /* BC PC100 */
sw t1, MC_LATENCY(t0)
/* Set SDRAM refresh rate */
li t1, 0x00000C30 /* 4K/64ms @ 100MHz */
sw t1, MC_TREFRESH(t0)
/* Finally enable the controller */
li t1, 1
sw t1, MC_CTRLENA(t0)
j ra
nop
|
