1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
|
/*
* (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at>
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <command.h>
#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13783.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define BOARD_STRING "Board: HALE TT-01"
/* Clock configuration */
#define CCM_CCMR_SETUP 0x074B0BF5
static void board_setup_clocks(void)
{
struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE;
volatile int wait = 0x10000;
writel(CCM_CCMR_SETUP, &ccm->ccmr);
while (wait--)
;
writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr);
writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr);
/* Set up clock to 532MHz */
writel(PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) |
PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |
PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |
PDR0_MCU_PODF(0), &ccm->pdr0);
writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12),
&ccm->mpctl);
writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1),
&ccm->spctl);
}
/* DRAM configuration */
#define ESDMISC_MDDR_SETUP 0x00000004
#define ESDMISC_MDDR_RESET_DL 0x0000000c
/*
* decoding magic 0x6ac73a = 0b 0110 1010 1100 0111 0011 1010 below:
* tXP = 11, tWTR = 0, tRP = 10, tMRD = 10
* tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11
* tRCD = 011, tRC = 010
* note: all but tWTR (1), tRC (111) are reset defaults,
* the same values work in the jtag configuration
*
* Bluetechnix setup has 0x75e73a (for 128MB) =
* 0b 0111 0101 1110 0111 0011 1010
* tXP = 11, tWTR = 1, tRP = 01, tMRD = 01
* tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11
* tRCD = 011, tRC = 010
*/
#define ESDCFG0_MDDR_SETUP 0x006ac73a
#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
ESDCTL_DSIZ(2) | ESDCTL_BL(1))
#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
#define ESDCTL_RW ESDCTL_SETTINGS
static void board_setup_sdram(void)
{
u32 *pad;
struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
/*
* setup pad control for the controller pins
* no loopback, no pull, no keeper, no open drain,
* standard input, standard drive, slow slew rate
*/
for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B;
pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++)
*pad = 0;
/* set up MX31 DDR Memory Controller */
writel(ESDMISC_MDDR_SETUP, &esdc->misc);
writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0);
/* perform DDR init sequence for CSD0 */
writel(ESDCTL_PRECHARGE, &esdc->ctl0);
writel(0x12344321, CSD0_BASE+0x0f00);
writel(ESDCTL_AUTOREFRESH, &esdc->ctl0);
writel(0x12344321, CSD0_BASE);
writel(0x12344321, CSD0_BASE);
writel(ESDCTL_LOADMODEREG, &esdc->ctl0);
writeb(0xda, CSD0_BASE+0x33);
writeb(0xff, CSD0_BASE+0x1000000);
writel(ESDCTL_RW, &esdc->ctl0);
writel(0xDEADBEEF, CSD0_BASE);
writel(ESDMISC_MDDR_RESET_DL, &esdc->misc);
}
static void tt01_spi3_hw_init(void)
{
/* CSPI3 */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC));
/* CSPI3, SS0 = Atlas */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1));
/* start CSPI3 clock (3 = always on except if PLL off) */
setbits_le32(CCM_CGR0, 3 << 16);
}
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_early_init_f(void)
{
/* CS4: FPGA incl. network controller */
struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
/* this seems essential, won't start without, but why? */
writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF);
board_setup_clocks();
board_setup_sdram();
mxc_setup_weimcs(4, &cs4);
/* Setup UART2 and SPI3 pins */
mx31_uart2_hw_init();
tt01_spi3_hw_init();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
#ifdef CONFIG_HW_WATCHDOG
mxc_hw_watchdog_enable();
#endif
return 0;
}
int checkboard(void)
{
puts(BOARD_STRING "\n");
return 0;
}
#ifdef CONFIG_MXC_MMC
int board_mmc_init(bd_t *bis)
{
u32 val;
struct pmic *p;
/*
* this is the first driver to use the pmic, so call
* pmic_init() here. board_late_init() is too late for
* the MMC driver.
*/
pmic_init();
p = get_pmic();
/* configure pins for SDHC1 only */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC));
/* turn on power V_MMC1 */
if (pmic_reg_read(p, REG_MODE_1, &val) < 0)
pmic_reg_write(p, REG_MODE_1, val | VMMC1EN);
return mxc_mmc_init(bis);
}
#endif
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}
|
