1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
|
/*
* Copyright 2004-2007 Freescale Semiconductor.
* Copyright 2002,2003, Motorola Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <config.h>
#include <mpc85xx.h>
/*
* TLB0 and TLB1 Entries
*
* Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
* However, CCSRBAR is then relocated to CFG_CCSRBAR right after
* these TLB entries are established.
*
* The TLB entries for DDR are dynamically setup in spd_sdram()
* and use TLB1 Entries 8 through 15 as needed according to the
* size of DDR memory.
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
* MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
#define entry_start \
mflr r1 ; \
bl 0f ;
#define entry_end \
0: mflr r0 ; \
mtlr r1 ; \
blr ;
.section .bootpg, "ax"
.globl tlb1_entry
tlb1_entry:
entry_start
/*
* Number of TLB0 and TLB1 entries in the following table
*/
.long (2f-1f)/16
1:
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
/*
* TLB0 4K Non-cacheable, guarded
* 0xff700000 4K Initial CCSRBAR mapping
*
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
/*
* TLB0 16K Cacheable, non-guarded
* 0xd001_0000 16K Temporary Global data for initialization
*
* Use four 4K TLB0 entries. These entries must be cacheable
* as they provide the bootstrap memory before the memory
* controler and real memory have been configured.
*
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
.long FSL_BOOKE_MAS0(0, 0, 0)
.long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
.long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
.long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/* TLB 1 Initializations */
/*
* TLBe 0: 16M Non-cacheable, guarded
* 0xff000000 16M FLASH (upper half)
* Out of reset this entry is only 4K.
*/
.long FSL_BOOKE_MAS0(1, 0, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
.long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x1000000, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x1000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 1: 16M Non-cacheable, guarded
* 0xfe000000 16M FLASH (lower half)
*/
.long FSL_BOOKE_MAS0(1, 1, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
.long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 2: 1G Non-cacheable, guarded
* 0x80000000 512M PCI1 MEM
* 0xa0000000 512M PCIe MEM
*/
.long FSL_BOOKE_MAS0(1, 2, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
.long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 3: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 8M PCI1 IO
* 0xe280_0000 8M PCIe IO
*/
.long FSL_BOOKE_MAS0(1, 3, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
.long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 4: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
.long FSL_BOOKE_MAS0(1, 4, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
.long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
.long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 5: 256K Non-cacheable, guarded
* 0xf8000000 32K BCSR
* 0xf8008000 32K PIB (CS4)
* 0xf8010000 32K PIB (CS5)
*/
.long FSL_BOOKE_MAS0(1, 5, 0)
.long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
.long FSL_BOOKE_MAS2(CFG_BCSR_BASE, (MAS2_I|MAS2_G))
.long FSL_BOOKE_MAS3(CFG_BCSR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
2:
entry_end
/*
* LAW(Local Access Window) configuration:
*
*0) 0x0000_0000 0x7fff_ffff DDR 2G
*1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
*2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
*-) 0xe000_0000 0xe00f_ffff CCSR 1M
*3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
*4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
*5) 0xc000_0000 0xdfff_ffff SRIO 512MB
*6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
*6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
*6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
*6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
*6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
*
*Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*
* The defines below are 1-off of the actual LAWAR0 usage.
* So LAWAR3 define uses the LAWAR4 register in the ECM.
*/
#define LAWBAR0 0
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long (4f-3f)/8
3:
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6
4:
entry_end
|
