path: root/board/cds/mpc8548cds/mpc8548cds.c

/*
 * Copyright 2004 Freescale Semiconductor.
 *
 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <spd.h>
#include <miiphy.h>

#include "../common/cadmus.h"
#include "../common/eeprom.h"
#include "../common/via.h"

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif

extern long int spd_sdram(void);

void local_bus_init(void);
void sdram_init(void);

int board_early_init_f (void)
{
	return 0;
}

int checkboard (void)
{
	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
	volatile ccsr_gur_t *gur = &immap->im_gur;

	/* PCI slot in USER bits CSR[6:7] by convention. */
	uint pci_slot = get_pci_slot ();

	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */

	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */

	uint cpu_board_rev = get_cpu_board_revision ();

	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
		get_board_version (), pci_slot);

	printf ("CPU Board Revision %d.%d (0x%04x)\n",
		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);

	printf ("    PCI1: %d bit, %s MHz, %s\n",
		(pci1_32) ? 32 : 64,
		(pci1_speed == 33000000) ? "33" :
		(pci1_speed == 66000000) ? "66" : "unknown",
		pci1_clk_sel ? "sync" : "async");

	if (pci_dual) {
		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
			pci2_clk_sel ? "sync" : "async");
	} else {
		printf ("    PCI2: disabled\n");
	}

	/*
	 * Initialize local bus.
	 */
	local_bus_init ();


	/*
	 * Hack TSEC 3 and 4 IO voltages.
	 */
	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */

	return 0;
}

long int
initdram(int board_type)
{
	long dram_size = 0;
	volatile immap_t *immap = (immap_t *)CFG_IMMR;

	puts("Initializing\n");

#if defined(CONFIG_DDR_DLL)
	{
		/*
		 * Work around to stabilize DDR DLL MSYNC_IN.
		 * Errata DDR9 seems to have been fixed.
		 * This is now the workaround for Errata DDR11:
		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
		 */

		volatile ccsr_gur_t *gur= &immap->im_gur;

		gur->ddrdllcr = 0x81000000;
		asm("sync;isync;msync");
		udelay(200);
	}
#endif
	dram_size = spd_sdram();

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	/*
	 * Initialize and enable DDR ECC.
	 */
	ddr_enable_ecc(dram_size);
#endif
	/*
	 * SDRAM Initialization
	 */
	sdram_init();

	puts("    DDR: ");
	return dram_size;
}

/*
 * Initialize Local Bus
 */
void
local_bus_init(void)
{
	volatile immap_t *immap = (immap_t *)CFG_IMMR;
	volatile ccsr_gur_t *gur = &immap->im_gur;
	volatile ccsr_lbc_t *lbc = &immap->im_lbc;

	uint clkdiv;
	uint lbc_hz;
	sys_info_t sysinfo;

	get_sys_info(&sysinfo);
	clkdiv = (lbc->lcrr & 0x0f) * 2;
	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;

	gur->lbiuiplldcr1 = 0x00078080;
	if (clkdiv == 16) {
		gur->lbiuiplldcr0 = 0x7c0f1bf0;
	} else if (clkdiv == 8) {
		gur->lbiuiplldcr0 = 0x6c0f1bf0;
	} else if (clkdiv == 4) {
		gur->lbiuiplldcr0 = 0x5c0f1bf0;
	}

	lbc->lcrr |= 0x00030000;

	asm("sync;isync;msync");
}

/*
 * Initialize SDRAM memory on the Local Bus.
 */
void
sdram_init(void)
{
#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)

	uint idx;
	volatile immap_t *immap = (immap_t *)CFG_IMMR;
	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
	uint cpu_board_rev;
	uint lsdmr_common;

	puts("    SDRAM: ");

	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");

	/*
	 * Setup SDRAM Base and Option Registers
	 */
	lbc->or2 = CFG_OR2_PRELIM;
	asm("msync");

	lbc->br2 = CFG_BR2_PRELIM;
	asm("msync");

	lbc->lbcr = CFG_LBC_LBCR;
	asm("msync");


	lbc->lsrt = CFG_LBC_LSRT;
	lbc->mrtpr = CFG_LBC_MRTPR;
	asm("msync");

	/*
	 * MPC8548 uses "new" 15-16 style addressing.
	 */
	cpu_board_rev = get_cpu_board_revision();
	lsdmr_common = CFG_LBC_LSDMR_COMMON;
	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;

	/*
	 * Issue PRECHARGE ALL command.
	 */
	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	/*
	 * Issue 8 AUTO REFRESH commands.
	 */
	for (idx = 0; idx < 8; idx++) {
		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
		asm("sync;msync");
		*sdram_addr = 0xff;
		ppcDcbf((unsigned long) sdram_addr);
		udelay(100);
	}

	/*
	 * Issue 8 MODE-set command.
	 */
	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(100);

	/*
	 * Issue NORMAL OP command.
	 */
	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
	asm("sync;msync");
	*sdram_addr = 0xff;
	ppcDcbf((unsigned long) sdram_addr);
	udelay(200);    /* Overkill. Must wait > 200 bus cycles */

#endif	/* enable SDRAM init */
}

#if defined(CFG_DRAM_TEST)
int
testdram(void)
{
	uint *pstart = (uint *) CFG_MEMTEST_START;
	uint *pend = (uint *) CFG_MEMTEST_END;
	uint *p;

	printf("Testing DRAM from 0x%08x to 0x%08x\n",
	       CFG_MEMTEST_START,
	       CFG_MEMTEST_END);

	printf("DRAM test phase 1:\n");
	for (p = pstart; p < pend; p++)
		*p = 0xaaaaaaaa;

	for (p = pstart; p < pend; p++) {
		if (*p != 0xaaaaaaaa) {
			printf ("DRAM test fails at: %08x\n", (uint) p);
			return 1;
		}
	}

	printf("DRAM test phase 2:\n");
	for (p = pstart; p < pend; p++)
		*p = 0x55555555;

	for (p = pstart; p < pend; p++) {
		if (*p != 0x55555555) {
			printf ("DRAM test fails at: %08x\n", (uint) p);
			return 1;
		}
	}

	printf("DRAM test passed.\n");
	return 0;
}
#endif

#if defined(CONFIG_PCI)
/* For some reason the Tundra PCI bridge shows up on itself as a
 * different device.  Work around that by refusing to configure it.
 */
void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }

static struct pci_config_table pci_mpc85xxcds_config_table[] = {
	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1, mpc85xx_config_via_usbide, {0,0,0}},
	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5, mpc85xx_config_via_power, {0,0,0}},
	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}}
};

static struct pci_controller hose[] = {
	{ config_table: pci_mpc85xxcds_config_table,},
#ifdef CONFIG_MPC85XX_PCI2
	{},
#endif
};

#endif	/* CONFIG_PCI */

void
pci_init_board(void)
{
#ifdef CONFIG_PCI
	pci_mpc85xx_init(&hose);
#endif
}

int last_stage_init(void)
{
	unsigned int temp;

	/* Change the resistors for the PHY */
	/* This is needed to get the RGMII working for the 1.3+
	 * CDS cards */
	if (get_board_version() ==  0x13) {
		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
				TSEC1_PHY_ADDR, 29, 18);

		miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
				TSEC1_PHY_ADDR, 30, &temp);

		temp = (temp & 0xf03f);
		temp |= 2 << 9;		/* 36 ohm */
		temp |= 2 << 6;		/* 39 ohm */

		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
				TSEC1_PHY_ADDR, 30, temp);

		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
				TSEC1_PHY_ADDR, 29, 3);

		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
				TSEC1_PHY_ADDR, 30, 0x8000);
	}

	return 0;
}