1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
|
/*
* Board specific setup info
*
* (C) Copyright 2005-2007
* Samsung Electronics,
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/omap2420.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks.h>
#include "mem.h"
#define APOLLON_CS0_BASE 0x00000000
#ifdef PRCM_CONFIG_I
#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907
#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013
#define SDRC_RFR_CTRL_0_VAL 0x00044C01
#elif defined(PRCM_CONFIG_II)
#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485
#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C
#define SDRC_RFR_CTRL_0_VAL 0x00030001
#endif
#define SDRAM_BASE_ADDRESS 0x80008000
_TEXT_BASE:
.word TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
#ifdef CFG_NOR_BOOT
/* Check running in SDRAM */
mov r0, pc, lsr #28
cmp r0, #8
beq prcm_setup
flash_setup:
/* In Flash */
ldr r0, =WD2_BASE
ldr r1, =WD_UNLOCK1
str r1, [r0, #WSPR]
ldr r1, =WD_UNLOCK2
str r1, [r0, #WSPR]
/* Pin muxing for SDRC */
mov r1, #0x00
ldr r0, =0x480000A1 /* ball C12, mode 0 */
strb r1, [r0]
ldr r0, =0x48000032 /* ball D11, mode 0 */
strb r1, [r0]
ldr r0, =0x480000A3 /* ball B13, mode 0 */
strb r1, [r0]
/* SDRC setting */
ldr r0, =OMAP2420_SDRC_BASE
ldr r1, =0x00000010
str r1, [r0, #0x10]
ldr r1, =0x00000100
str r1, [r0, #0x44]
/* SDRC CS0 configuration */
ldr r1, =0x00d04011
str r1, [r0, #0x80]
ldr r1, =SDRC_ACTIM_CTRLA_0_VAL
str r1, [r0, #0x9C]
ldr r1, =SDRC_ACTIM_CTRLB_0_VAL
str r1, [r0, #0xA0]
ldr r1, =SDRC_RFR_CTRL_0_VAL
str r1, [r0, #0xA4]
ldr r1, =0x00000041
str r1, [r0, #0x70]
/* Manual command sequence */
ldr r1, =0x00000007
str r1, [r0, #0xA8]
ldr r1, =0x00000000
str r1, [r0, #0xA8]
ldr r1, =0x00000001
str r1, [r0, #0xA8]
ldr r1, =0x00000002
str r1, [r0, #0xA8]
str r1, [r0, #0xA8]
/*
* CS0 SDRC Mode register
* Burst length = 4 - DDR memory
* Serial mode
* CAS latency = 3
*/
ldr r1, =0x00000032
str r1, [r0, #0x84]
/* Note: You MUST set EMR values */
/* EMR1 & EMR2 */
ldr r1, =0x00000000
str r1, [r0, #0x88]
str r1, [r0, #0x8C]
#ifdef OLD_SDRC_DLLA_CTRL
/* SDRC_DLLA_CTRL */
ldr r1, =0x00007306
str r1, [r0, #0x60]
ldr r1, =0x00007303
str r1, [r0, #0x60]
#else
/* SDRC_DLLA_CTRL */
ldr r1, =0x00000506
str r1, [r0, #0x60]
ldr r1, =0x00000503
str r1, [r0, #0x60]
#endif
#ifdef __BROKEN_FEATURE__
/* SDRC_DLLB_CTRL */
ldr r1, =0x00000506
str r1, [r0, #0x68]
ldr r1, =0x00000503
str r1, [r0, #0x68]
#endif
/* little delay after init */
mov r2, #0x1800
1:
subs r2, r2, #0x1
bne 1b
/* Setup base address */
ldr r0, =0x00000000 /* NOR address */
ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */
ldr r2, =0x20000 /* Size: 128KB */
copy_loop:
ldmia r0!, {r3-r10}
stmia r1!, {r3-r10}
cmp r0, r2
ble copy_loop
ldr r1, =SDRAM_BASE_ADDRESS
mov lr, pc
mov pc, r1
#endif
prcm_setup:
ldr r0, =OMAP2420_CM_BASE
ldr r1, [r0, #0x544] /* CLKSEL2_PLL */
bic r1, r1, #0x03
orr r1, r1, #0x02
str r1, [r0, #0x544]
ldr r1, [r0, #0x500]
bic r1, r1, #0x03
orr r1, r1, #0x01
str r1, [r0, #0x500]
ldr r1, [r0, #0x140]
bic r1, r1, #0x1f
orr r1, r1, #0x02
str r1, [r0, #0x140]
#ifdef PRCM_CONFIG_I
ldr r1, =0x000003C3
#else
ldr r1, =0x00000343
#endif
str r1, [r0, #0x840]
ldr r1, =0x00000002
str r1, [r0, #0x340]
ldr r1, =CM_CLKSEL1_CORE
#ifdef PRCM_CONFIG_I
ldr r2, =0x08300C44
#else
ldr r2, =0x04600C26
#endif
str r2, [r1]
ldr r0, =OMAP2420_CM_BASE
ldr r1, [r0, #0x084]
and r1, r1, #0x01
cmp r1, #0x01
bne clkvalid
b .
clkvalid:
mov r1, #0x01
str r1, [r0, #0x080]
waitvalid:
ldr r1, [r0, #0x084]
and r1, r1, #0x01
cmp r1, #0x00
bne waitvalid
ldr r0, =CM_CLKSEL1_PLL
#ifdef PRCM_CONFIG_I
ldr r1, =0x01837100
#else
ldr r1, =0x01832100
#endif
str r1, [r0]
ldr r0, =PRCM_CLKCFG_CTRL
mov r1, #0x01
str r1, [r0]
mov r6, #0x50
loop1:
subs r6, r6, #0x01
cmp r6, #0x01
bne loop1
ldr r0, =CM_CLKEN_PLL
mov r1, #0x0f
str r1, [r0]
mov r6, #0x100
loop2:
subs r6, r6, #0x01
cmp r6, #0x01
bne loop2
ldr r0, =0x48008200
ldr r1, =0xbfffffff
str r1, [r0]
ldr r0, =0x48008210
ldr r1, =0xfffffff9
str r1, [r0]
ldr r0, =0x4806a004
ldr r1, =0x00
strb r1, [r0]
ldr r0, =0x4806a020
ldr r1, =0x07
strb r1, [r0]
ldr r0, =0x4806a00c
ldr r1, =0x83
strb r1, [r0]
ldr r0, =0x4806a000
ldr r1, =0x1a
strb r1, [r0]
ldr r0, =0x4806a004
ldr r1, =0x00
strb r1, [r0]
ldr r0, =0x4806a00c
ldr r1, =0x03
strb r1, [r0]
ldr r0, =0x4806a010
ldr r1, =0x03
strb r1, [r0]
ldr r0, =0x4806a008
ldr r1, =0x04
strb r1, [r0]
ldr r0, =0x4806a020
ldr r1, =0x00
strb r1, [r0]
#if 0
ldr r0, =0x4806a000
mov r1, #'u'
strb r1, [r0]
#endif
#if 0
/* LED0 OFF */
ldr r3, =0x480000E5
mov r4, #0x0b
strb r4, [r3]
#endif
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
bl s_init /* go setup pll,mux,memory */
ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */
/* map interrupt controller */
ldr r0, VAL_INTH_SETUP
mcr p15, 0, r0, c15, c2, 4
/* back to arch calling code */
mov pc, lr
/* the literal pools origin */
.ltorg
VAL_INTH_SETUP:
.word PERIFERAL_PORT_BASE
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK
|
