summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc8220/fec.c
blob: 9a6d434dba6e544eefcabf91a60367bde0ab2392 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
/*
 * (C) Copyright 2003-2010
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * This file is based on mpc4200fec.c,
 * (C) Copyright Motorola, Inc., 2000
 */

#include <common.h>
#include <mpc8220.h>
#include <malloc.h>
#include <net.h>
#include <miiphy.h>
#include "dma.h"
#include "fec.h"

#undef  DEBUG
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
    defined(CONFIG_MPC8220_FEC)

#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif

#ifdef DEBUG
static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
#endif /* DEBUG */

typedef struct {
	u8 data[1500];		/* actual data */
	int length;		/* actual length */
	int used;		/* buffer in use or not */
	u8 head[16];		/* MAC header(6 + 6 + 2) + 2(aligned) */
} NBUF;

int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);

/********************************************************************/
#ifdef DEBUG
static void mpc8220_fec_phydump (char *devname)
{
	u16 phyStatus, i;
	u8 phyAddr = CONFIG_PHY_ADDR;
	u8 reg_mask[] = {
#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
		/* regs to print: 0...7, 16...19, 21, 23, 24 */
		1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
		1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
#else
		/* regs to print: 0...8, 16...20 */
		1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
		1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
#endif
	};

	for (i = 0; i < 32; i++) {
		if (reg_mask[i]) {
			miiphy_read (devname, phyAddr, i, &phyStatus);
			printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
		}
	}
}
#endif

/********************************************************************/
static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
{
	int ix;
	char *data;
	static int once = 0;

	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
		if (!once) {
			data = (char *) malloc (FEC_MAX_PKT_SIZE);
			if (data == NULL) {
				printf ("RBD INIT FAILED\n");
				return -1;
			}
			fec->rbdBase[ix].dataPointer = (u32) data;
		}
		fec->rbdBase[ix].status = FEC_RBD_EMPTY;
		fec->rbdBase[ix].dataLength = 0;
	}
	once++;

	/*
	 * have the last RBD to close the ring
	 */
	fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
	fec->rbdIndex = 0;

	return 0;
}

/********************************************************************/
static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
{
	int ix;

	for (ix = 0; ix < FEC_TBD_NUM; ix++) {
		fec->tbdBase[ix].status = 0;
	}

	/*
	 * Have the last TBD to close the ring
	 */
	fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;

	/*
	 * Initialize some indices
	 */
	fec->tbdIndex = 0;
	fec->usedTbdIndex = 0;
	fec->cleanTbdNum = FEC_TBD_NUM;
}

/********************************************************************/
static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
{
	/*
	 * Reset buffer descriptor as empty
	 */
	if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
		pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
	else
		pRbd->status = FEC_RBD_EMPTY;

	pRbd->dataLength = 0;

	/*
	 * Now, we have an empty RxBD, restart the SmartDMA receive task
	 */
	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);

	/*
	 * Increment BD count
	 */
	fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
}

/********************************************************************/
static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
{
	FEC_TBD *pUsedTbd;

#ifdef DEBUG
	printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
		fec->cleanTbdNum, fec->usedTbdIndex);
#endif

	/*
	 * process all the consumed TBDs
	 */
	while (fec->cleanTbdNum < FEC_TBD_NUM) {
		pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
		if (pUsedTbd->status & FEC_TBD_READY) {
#ifdef DEBUG
			printf ("Cannot clean TBD %d, in use\n",
				fec->cleanTbdNum);
#endif
			return;
		}

		/*
		 * clean this buffer descriptor
		 */
		if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
			pUsedTbd->status = FEC_TBD_WRAP;
		else
			pUsedTbd->status = 0;

		/*
		 * update some indeces for a correct handling of the TBD ring
		 */
		fec->cleanTbdNum++;
		fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
	}
}

/********************************************************************/
static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
{
	u8 currByte;		/* byte for which to compute the CRC */
	int byte;		/* loop - counter */
	int bit;		/* loop - counter */
	u32 crc = 0xffffffff;	/* initial value */

	/*
	 * The algorithm used is the following:
	 * we loop on each of the six bytes of the provided address,
	 * and we compute the CRC by left-shifting the previous
	 * value by one position, so that each bit in the current
	 * byte of the address may contribute the calculation. If
	 * the latter and the MSB in the CRC are different, then
	 * the CRC value so computed is also ex-ored with the
	 * "polynomium generator". The current byte of the address
	 * is also shifted right by one bit at each iteration.
	 * This is because the CRC generatore in hardware is implemented
	 * as a shift-register with as many ex-ores as the radixes
	 * in the polynomium. This suggests that we represent the
	 * polynomiumm itself as a 32-bit constant.
	 */
	for (byte = 0; byte < 6; byte++) {
		currByte = mac[byte];
		for (bit = 0; bit < 8; bit++) {
			if ((currByte & 0x01) ^ (crc & 0x01)) {
				crc >>= 1;
				crc = crc ^ 0xedb88320;
			} else {
				crc >>= 1;
			}
			currByte >>= 1;
		}
	}

	crc = crc >> 26;

	/*
	 * Set individual hash table register
	 */
	if (crc >= 32) {
		fec->eth->iaddr1 = (1 << (crc - 32));
		fec->eth->iaddr2 = 0;
	} else {
		fec->eth->iaddr1 = 0;
		fec->eth->iaddr2 = (1 << crc);
	}

	/*
	 * Set physical address
	 */
	fec->eth->paddr1 =
		(mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
	fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
}

/********************************************************************/
static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
{
	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
	struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
	const u8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */

#ifdef DEBUG
	printf ("mpc8220_fec_init... Begin\n");
#endif

	/*
	 * Initialize RxBD/TxBD rings
	 */
	mpc8220_fec_rbd_init (fec);
	mpc8220_fec_tbd_init (fec);

	/*
	 * Set up Pin Muxing for FEC 1
	 */
	*(vu_long *) MMAP_PCFG = 0;
	*(vu_long *) (MMAP_PCFG + 4) = 0;
	/*
	 * Clear FEC-Lite interrupt event register(IEVENT)
	 */
	fec->eth->ievent = 0xffffffff;

	/*
	 * Set interrupt mask register
	 */
	fec->eth->imask = 0x00000000;

	/*
	 * Set FEC-Lite receive control register(R_CNTRL):
	 */
	if (fec->xcv_type == SEVENWIRE) {
		/*
		 * Frame length=1518; 7-wire mode
		 */
		fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
	} else {
		/*
		 * Frame length=1518; MII mode;
		 */
		fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
	}

	fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
	if (fec->xcv_type != SEVENWIRE) {
		/*
		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
		 * and do not drop the Preamble.
		 */
		/* tbd - rtm */
		/*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
		/* No MII for 7-wire mode */
		fec->eth->mii_speed = 0x00000030;
	}

	/*
	 * Set Opcode/Pause Duration Register
	 */
	fec->eth->op_pause = 0x00010020;	/*FIXME0xffff0020; */

	/*
	 * Set Rx FIFO alarm and granularity value
	 */
	fec->eth->rfifo_cntrl = 0x0c000000;
	fec->eth->rfifo_alarm = 0x0000030c;
#ifdef DEBUG
	if (fec->eth->rfifo_status & 0x00700000) {
		printf ("mpc8220_fec_init() RFIFO error\n");
	}
#endif

	/*
	 * Set Tx FIFO granularity value
	 */
	/*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
	fec->eth->tfifo_cntrl = 0x0e000000;
#ifdef DEBUG
	printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
	printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
#endif

	/*
	 * Set transmit fifo watermark register(X_WMRK), default = 64
	 */
	fec->eth->tfifo_alarm = 0x00000080;
	fec->eth->x_wmrk = 0x2;

	/*
	 * Set individual address filter for unicast address
	 * and set physical address registers.
	 */
	mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));

	/*
	 * Set multicast address filter
	 */
	fec->eth->gaddr1 = 0x00000000;
	fec->eth->gaddr2 = 0x00000000;

	/*
	 * Turn ON cheater FSM: ????
	 */
	fec->eth->xmit_fsm = 0x03000000;

#if 1
/*#if defined(CONFIG_MPC5200)*/
	/*
	 * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
	 * work w/ the current receive task.
	 */
	dma->PtdCntrl |= 0x00000001;
#endif

	/*
	 * Set priority of different initiators
	 */
	dma->IPR0 = 7;		/* always */
	dma->IPR3 = 6;		/* Eth RX */
	dma->IPR4 = 5;		/* Eth Tx */

	/*
	 * Clear SmartDMA task interrupt pending bits
	 */
	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);

	/*
	 * Initialize SmartDMA parameters stored in SRAM
	 */
	*(int *) FEC_TBD_BASE = (int) fec->tbdBase;
	*(int *) FEC_RBD_BASE = (int) fec->rbdBase;
	*(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
	*(int *) FEC_RBD_NEXT = (int) fec->rbdBase;

	if (fec->xcv_type != SEVENWIRE) {
		/*
		 * Initialize PHY(LXT971A):
		 *
		 *   Generally, on power up, the LXT971A reads its configuration
		 *   pins to check for forced operation, If not cofigured for
		 *   forced operation, it uses auto-negotiation/parallel detection
		 *   to automatically determine line operating conditions.
		 *   If the PHY device on the other side of the link supports
		 *   auto-negotiation, the LXT971A auto-negotiates with it
		 *   using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
		 *   support auto-negotiation, the LXT971A automatically detects
		 *   the presence of either link pulses(10Mbps PHY) or Idle
		 *   symbols(100Mbps) and sets its operating conditions accordingly.
		 *
		 *   When auto-negotiation is controlled by software, the following
		 *   steps are recommended.
		 *
		 * Note:
		 *   The physical address is dependent on hardware configuration.
		 *
		 */
		int timeout = 1;
		u16 phyStatus;

		/*
		 * Reset PHY, then delay 300ns
		 */
		miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
		udelay (1000);

		if (fec->xcv_type == MII10) {
			/*
			 * Force 10Base-T, FDX operation
			 */
#ifdef DEBUG
			printf ("Forcing 10 Mbps ethernet link... ");
#endif
			miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
			/*
			   miiphy_write(fec, phyAddr, 0x0, 0x0100);
			 */
			miiphy_write (dev->name, phyAddr, 0x0, 0x0180);

			timeout = 20;
			do {	/* wait for link status to go down */
				udelay (10000);
				if ((timeout--) == 0) {
#ifdef DEBUG
					printf ("hmmm, should not have waited...");
#endif
					break;
				}
				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
#ifdef DEBUG
				printf ("=");
#endif
			} while ((phyStatus & 0x0004)); /* !link up */

			timeout = 1000;
			do {	/* wait for link status to come back up */
				udelay (10000);
				if ((timeout--) == 0) {
					printf ("failed. Link is down.\n");
					break;
				}
				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
#ifdef DEBUG
				printf ("+");
#endif
			} while (!(phyStatus & 0x0004));	/* !link up */

#ifdef DEBUG
			printf ("done.\n");
#endif
		} else {	/* MII100 */
			/*
			 * Set the auto-negotiation advertisement register bits
			 */
			miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);

			/*
			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
			 */
			miiphy_write (dev->name, phyAddr, 0x0, 0x1200);

			/*
			 * Wait for AN completion
			 */
			timeout = 5000;
			do {
				udelay (1000);

				if ((timeout--) == 0) {
#ifdef DEBUG
					printf ("PHY auto neg 0 failed...\n");
#endif
					return -1;
				}

				if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
				    0) {
#ifdef DEBUG
					printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
#endif
					return -1;
				}
			} while (!(phyStatus & 0x0004));

#ifdef DEBUG
			printf ("PHY auto neg complete! \n");
#endif
		}

	}

	/*
	 * Enable FEC-Lite controller
	 */
	fec->eth->ecntrl |= 0x00000006;

#ifdef DEBUG
	if (fec->xcv_type != SEVENWIRE)
		mpc8220_fec_phydump (dev->name);
#endif

	/*
	 * Enable SmartDMA receive task
	 */
	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);

#ifdef DEBUG
	printf ("mpc8220_fec_init... Done \n");
#endif

	return 1;
}

/********************************************************************/
static void mpc8220_fec_halt (struct eth_device *dev)
{
	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
	int counter = 0xffff;

#ifdef DEBUG
	if (fec->xcv_type != SEVENWIRE)
		mpc8220_fec_phydump (dev->name);
#endif

	/*
	 * mask FEC chip interrupts
	 */
	fec->eth->imask = 0;

	/*
	 * issue graceful stop command to the FEC transmitter if necessary
	 */
	fec->eth->x_cntrl |= 0x00000001;

	/*
	 * wait for graceful stop to register
	 */
	while ((counter--) && (!(fec->eth->ievent & 0x10000000)));

	/*
	 * Disable SmartDMA tasks
	 */
	DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
	DMA_TASK_DISABLE (FEC_RECV_TASK_NO);

	/*
	 * Disable the Ethernet Controller
	 */
	fec->eth->ecntrl &= 0xfffffffd;

	/*
	 * Clear FIFO status registers
	 */
	fec->eth->rfifo_status &= 0x00700000;
	fec->eth->tfifo_status &= 0x00700000;

	fec->eth->reset_cntrl = 0x01000000;

	/*
	 * Issue a reset command to the FEC chip
	 */
	fec->eth->ecntrl |= 0x1;

	/*
	 * wait at least 16 clock cycles
	 */
	udelay (10);

#ifdef DEBUG
	printf ("Ethernet task stopped\n");
#endif
}

#ifdef DEBUG
/********************************************************************/

static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
{
	u16 phyAddr = CONFIG_PHY_ADDR;
	u16 phyStatus;

	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
	    || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {

		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
		printf ("\nphyStatus: 0x%04x\n", phyStatus);
		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
		printf ("ievent:   0x%08x\n", fec->eth->ievent);
		printf ("x_status: 0x%08x\n", fec->eth->x_status);
		printf ("tfifo: status	0x%08x\n", fec->eth->tfifo_status);

		printf ("	control 0x%08x\n", fec->eth->tfifo_cntrl);
		printf ("	lrfp	0x%08x\n", fec->eth->tfifo_lrf_ptr);
		printf ("	lwfp	0x%08x\n", fec->eth->tfifo_lwf_ptr);
		printf ("	alarm	0x%08x\n", fec->eth->tfifo_alarm);
		printf ("	readptr 0x%08x\n", fec->eth->tfifo_rdptr);
		printf ("	writptr 0x%08x\n", fec->eth->tfifo_wrptr);
	}
}

static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
{
	u16 phyAddr = CONFIG_PHY_ADDR;
	u16 phyStatus;

	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
	    || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {

		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
		printf ("\nphyStatus: 0x%04x\n", phyStatus);
		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
		printf ("ievent:   0x%08x\n", fec->eth->ievent);
		printf ("x_status: 0x%08x\n", fec->eth->x_status);
		printf ("rfifo: status	0x%08x\n", fec->eth->rfifo_status);

		printf ("	control 0x%08x\n", fec->eth->rfifo_cntrl);
		printf ("	lrfp	0x%08x\n", fec->eth->rfifo_lrf_ptr);
		printf ("	lwfp	0x%08x\n", fec->eth->rfifo_lwf_ptr);
		printf ("	alarm	0x%08x\n", fec->eth->rfifo_alarm);
		printf ("	readptr 0x%08x\n", fec->eth->rfifo_rdptr);
		printf ("	writptr 0x%08x\n", fec->eth->rfifo_wrptr);
	}
}
#endif /* DEBUG */

/********************************************************************/

static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
			     int data_length)
{
	/*
	 * This routine transmits one frame.  This routine only accepts
	 * 6-byte Ethernet addresses.
	 */
	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
	FEC_TBD *pTbd;

#ifdef DEBUG
	printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
	tfifo_print (dev->name, fec);
#endif

	/*
	 * Clear Tx BD ring at first
	 */
	mpc8220_fec_tbd_scrub (fec);

	/*
	 * Check for valid length of data.
	 */
	if ((data_length > 1500) || (data_length <= 0)) {
		return -1;
	}

	/*
	 * Check the number of vacant TxBDs.
	 */
	if (fec->cleanTbdNum < 1) {
#ifdef DEBUG
		printf ("No available TxBDs ...\n");
#endif
		return -1;
	}

	/*
	 * Get the first TxBD to send the mac header
	 */
	pTbd = &fec->tbdBase[fec->tbdIndex];
	pTbd->dataLength = data_length;
	pTbd->dataPointer = (u32) eth_data;
	pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;

#ifdef DEBUG
	printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
#endif

	/*
	 * Kick the MII i/f
	 */
	if (fec->xcv_type != SEVENWIRE) {
		u16 phyStatus;

		miiphy_read (dev->name, 0, 0x1, &phyStatus);
	}

	/*
	 * Enable SmartDMA transmit task
	 */

#ifdef DEBUG
	tfifo_print (dev->name, fec);
#endif

	DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);

#ifdef DEBUG
	tfifo_print (dev->name, fec);
#endif

#ifdef DEBUG
	printf ("+");
#endif

	fec->cleanTbdNum -= 1;

#ifdef DEBUG
	printf ("smartDMA ethernet Tx task enabled\n");
#endif
	/*
	 * wait until frame is sent .
	 */
	while (pTbd->status & FEC_TBD_READY) {
		udelay (10);
#ifdef DEBUG
		printf ("TDB status = %04x\n", pTbd->status);
#endif
	}

	return 0;
}


/********************************************************************/
static int mpc8220_fec_recv (struct eth_device *dev)
{
	/*
	 * This command pulls one frame from the card
	 */
	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
	FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
	unsigned long ievent;
	int frame_length, len = 0;
	NBUF *frame;

#ifdef DEBUG
	printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
	printf ("-");
#endif

	/*
	 * Check if any critical events have happened
	 */
	ievent = fec->eth->ievent;
	fec->eth->ievent = ievent;
	if (ievent & 0x20060000) {
		/* BABT, Rx/Tx FIFO errors */
		mpc8220_fec_halt (dev);
		mpc8220_fec_init (dev, NULL);
		return 0;
	}
	if (ievent & 0x80000000) {
		/* Heartbeat error */
		fec->eth->x_cntrl |= 0x00000001;
	}
	if (ievent & 0x10000000) {
		/* Graceful stop complete */
		if (fec->eth->x_cntrl & 0x00000001) {
			mpc8220_fec_halt (dev);
			fec->eth->x_cntrl &= ~0x00000001;
			mpc8220_fec_init (dev, NULL);
		}
	}

	if (!(pRbd->status & FEC_RBD_EMPTY)) {
		if ((pRbd->status & FEC_RBD_LAST)
		    && !(pRbd->status & FEC_RBD_ERR)
		    && ((pRbd->dataLength - 4) > 14)) {

			/*
			 * Get buffer address and size
			 */
			frame = (NBUF *) pRbd->dataPointer;
			frame_length = pRbd->dataLength - 4;

#if (0)
			{
				int i;

				printf ("recv data hdr:");
				for (i = 0; i < 14; i++)
					printf ("%x ", *(frame->head + i));
				printf ("\n");
			}
#endif
			/*
			 *  Fill the buffer and pass it to upper layers
			 */
/*			memcpy(buff, frame->head, 14);
			memcpy(buff + 14, frame->data, frame_length);*/
			NetReceive ((volatile uchar *) pRbd->dataPointer,
				    frame_length);
			len = frame_length;
		}
		/*
		 * Reset buffer descriptor as empty
		 */
		mpc8220_fec_rbd_clean (fec, pRbd);
	}
	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
	return len;
}


/********************************************************************/
int mpc8220_fec_initialize (bd_t * bis)
{
	mpc8220_fec_priv *fec;

#ifdef CONFIG_HAS_ETH1
	mpc8220_fec_priv *fec2;
#endif
	struct eth_device *dev;
	char *tmp, *end;
	char env_enetaddr[6];

#ifdef CONFIG_HAS_ETH1
	char env_enet1addr[6];
#endif
	int i;

	fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
	dev = (struct eth_device *) malloc (sizeof (*dev));
	memset (dev, 0, sizeof *dev);

	fec->eth = (ethernet_regs *) MMAP_FEC1;
#ifdef CONFIG_HAS_ETH1
	fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
	fec2->eth = (ethernet_regs *) MMAP_FEC2;
#endif
	fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
	fec->rbdBase =
		(FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
	fec->xcv_type = MII100;

	dev->priv = (void *) fec;
	dev->iobase = MMAP_FEC1;
	dev->init = mpc8220_fec_init;
	dev->halt = mpc8220_fec_halt;
	dev->send = mpc8220_fec_send;
	dev->recv = mpc8220_fec_recv;

	sprintf (dev->name, "FEC");
	eth_register (dev);

#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
	miiphy_register (dev->name,
			fec8220_miiphy_read, fec8220_miiphy_write);
#endif

	/*
	 * Try to set the mac address now. The fec mac address is
	 * a garbage after reset. When not using fec for booting
	 * the Linux fec driver will try to work with this garbage.
	 */
	tmp = getenv ("ethaddr");
	if (tmp) {
		for (i = 0; i < 6; i++) {
			env_enetaddr[i] =
				tmp ? simple_strtoul (tmp, &end, 16) : 0;
			if (tmp)
				tmp = (*end) ? end + 1 : end;
		}
		mpc8220_fec_set_hwaddr (fec, env_enetaddr);
	}
#ifdef CONFIG_HAS_ETH1
	tmp = getenv ("eth1addr");
	if (tmp) {
		for (i = 0; i < 6; i++) {
			env_enet1addr[i] =
				tmp ? simple_strtoul (tmp, &end, 16) : 0;
			if (tmp)
				tmp = (*end) ? end + 1 : end;
		}
		mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
	}
#endif

	return 1;
}

/* MII-interface related functions */
/********************************************************************/
int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
{
	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
	u32 reg;		/* convenient holder for the PHY register */
	u32 phy;		/* convenient holder for the PHY */
	int timeout = 0xffff;

	/*
	 * reading from any PHY's register is done by properly
	 * programming the FEC's MII data register.
	 */
	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;

	eth->mii_data =
		(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
		 | reg);

	/*
	 * wait for the related interrupt
	 */
	while ((timeout--) && (!(eth->ievent & 0x00800000)));

	if (timeout == 0) {
#ifdef DEBUG
		printf ("Read MDIO failed...\n");
#endif
		return -1;
	}

	/*
	 * clear mii interrupt bit
	 */
	eth->ievent = 0x00800000;

	/*
	 * it's now safe to read the PHY's register
	 */
	*retVal = (u16) eth->mii_data;

	return 0;
}

/********************************************************************/
int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
{
	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
	u32 reg;		/* convenient holder for the PHY register */
	u32 phy;		/* convenient holder for the PHY */
	int timeout = 0xffff;

	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;

	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
			 FEC_MII_DATA_TA | phy | reg | data);

	/*
	 * wait for the MII interrupt
	 */
	while ((timeout--) && (!(eth->ievent & 0x00800000)));

	if (timeout == 0) {
#ifdef DEBUG
		printf ("Write MDIO failed...\n");
#endif
		return -1;
	}

	/*
	 * clear MII interrupt bit
	 */
	eth->ievent = 0x00800000;

	return 0;
}

#endif /* CONFIG_MPC8220_FEC */