1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
|
/*
* serial.h - common serial defines for early debug and serial driver.
* any functions defined here must be always_inline since
* initcode cannot have function calls.
*
* Copyright (c) 2004-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_CPU_SERIAL_H__
#define __BFIN_CPU_SERIAL_H__
#include <asm/blackfin.h>
#include <asm/mach-common/bits/uart.h>
#ifndef CONFIG_UART_CONSOLE
# define CONFIG_UART_CONSOLE 0
#endif
#ifdef CONFIG_DEBUG_EARLY_SERIAL
# define BFIN_DEBUG_EARLY_SERIAL 1
#else
# define BFIN_DEBUG_EARLY_SERIAL 0
#endif
#ifndef __ASSEMBLY__
#include <asm/portmux.h>
#define LOB(x) ((x) & 0xFF)
#define HIB(x) (((x) >> 8) & 0xFF)
#if defined(__ADSPBF50x__) || defined(__ADSPBF54x__)
# define BFIN_UART_HW_VER 2
#else
# define BFIN_UART_HW_VER 1
#endif
/*
* All Blackfin system MMRs are padded to 32bits even if the register
* itself is only 16bits. So use a helper macro to streamline this.
*/
#define __BFP(m) u16 m; u16 __pad_##m
struct bfin_mmr_serial {
#if BFIN_UART_HW_VER == 2
__BFP(dll);
__BFP(dlh);
__BFP(gctl);
__BFP(lcr);
__BFP(mcr);
__BFP(lsr);
__BFP(msr);
__BFP(scr);
__BFP(ier_set);
__BFP(ier_clear);
__BFP(thr);
__BFP(rbr);
#else
union {
u16 dll;
u16 thr;
const u16 rbr;
};
const u16 __spad0;
union {
u16 dlh;
u16 ier;
};
const u16 __spad1;
const __BFP(iir);
__BFP(lcr);
__BFP(mcr);
__BFP(lsr);
__BFP(msr);
__BFP(scr);
const u32 __spad2;
__BFP(gctl);
#endif
};
#undef __BFP
#define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx
#define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx)
#define MMR_UART(n) _PASTE_UART(n, UART, DLL)
#define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin)
#define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin)
#ifndef UART_DLL
# define UART_DLL MMR_UART(CONFIG_UART_CONSOLE)
#else
# define UART0_DLL UART_DLL
# if CONFIG_UART_CONSOLE != 0
# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART
# endif
#endif
#define pUART ((volatile struct bfin_mmr_serial *)uart_base)
#if BFIN_UART_HW_VER == 2
# define ACCESS_LATCH()
# define ACCESS_PORT_IER()
#else
# define ACCESS_LATCH() \
bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) | DLAB)
# define ACCESS_PORT_IER() \
bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) & ~DLAB)
#endif
__attribute__((always_inline))
static inline void serial_do_portmux(void)
{
if (!BFIN_DEBUG_EARLY_SERIAL) {
const unsigned short pins[] = { P_UART(RX), P_UART(TX), 0, };
peripheral_request_list(pins, "bfin-uart");
return;
}
#if defined(__ADSPBF50x__)
# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(G, 7, 7, 12, 13); break; /* Port G; mux 7; PG12 and PG13 */
case 1: DO_MUX(F, 3, 3, 6, 7); break; /* Port F; mux 3; PF6 and PF7 */
}
SSYNC();
#elif defined(__ADSPBF51x__)
# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */
case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */
}
SSYNC();
#elif defined(__ADSPBF52x__)
# define DO_MUX(port, mux, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */
case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */
}
SSYNC();
#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
const uint16_t func[] = { PFDE, PFTE, };
bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]);
bfin_write_PORTF_FER(bfin_read_PORTF_FER() |
(1 << P_IDENT(P_UART(RX))) |
(1 << P_IDENT(P_UART(TX))));
SSYNC();
#elif defined(__ADSPBF54x__)
# define DO_MUX(port, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */
case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */
case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */
case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */
}
SSYNC();
#elif defined(__ADSPBF561__)
/* UART pins could be GPIO, but they aren't pin muxed. */
#else
# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED)
# error "missing portmux logic for UART"
# endif
#endif
}
__attribute__((always_inline))
static inline int uart_init(uint32_t uart_base)
{
/* always enable UART -- avoids anomalies 05000309 and 05000350 */
bfin_write(&pUART->gctl, UCEN);
/* Set LCR to Word Lengh 8-bit word select */
bfin_write(&pUART->lcr, WLS_8);
SSYNC();
return 0;
}
__attribute__((always_inline))
static inline int serial_early_init(uint32_t uart_base)
{
/* handle portmux crap on different Blackfins */
serial_do_portmux();
return uart_init(uart_base);
}
__attribute__((always_inline))
static inline int serial_early_uninit(uint32_t uart_base)
{
/* disable the UART by clearing UCEN */
bfin_write(&pUART->gctl, 0);
return 0;
}
__attribute__((always_inline))
static inline void serial_early_put_div(uint32_t uart_base, uint16_t divisor)
{
/* Set DLAB in LCR to Access DLL and DLH */
ACCESS_LATCH();
SSYNC();
/* Program the divisor to get the baud rate we want */
bfin_write(&pUART->dll, LOB(divisor));
bfin_write(&pUART->dlh, HIB(divisor));
SSYNC();
/* Clear DLAB in LCR to Access THR RBR IER */
ACCESS_PORT_IER();
SSYNC();
}
__attribute__((always_inline))
static inline uint16_t serial_early_get_div(void)
{
uint32_t uart_base = UART_DLL;
/* Set DLAB in LCR to Access DLL and DLH */
ACCESS_LATCH();
SSYNC();
uint8_t dll = bfin_read(&pUART->dll);
uint8_t dlh = bfin_read(&pUART->dlh);
uint16_t divisor = (dlh << 8) | dll;
/* Clear DLAB in LCR to Access THR RBR IER */
ACCESS_PORT_IER();
SSYNC();
return divisor;
}
/* We cannot use get_sclk() early on as it uses caches in external memory */
#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
#endif
__attribute__((always_inline))
static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud)
{
/* Translate from baud into divisor in terms of SCLK. The
* weird multiplication is to make sure we over sample just
* a little rather than under sample the incoming signals.
*/
serial_early_put_div(uart_base,
(get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
}
#ifndef BFIN_IN_INITCODE
__attribute__((always_inline))
static inline void serial_early_puts(const char *s)
{
if (BFIN_DEBUG_EARLY_SERIAL) {
serial_puts("Early: ");
serial_puts(s);
}
}
#endif
#else
.macro serial_early_init
#ifdef CONFIG_DEBUG_EARLY_SERIAL
call _serial_initialize;
#endif
.endm
.macro serial_early_set_baud
#ifdef CONFIG_DEBUG_EARLY_SERIAL
R0.L = LO(CONFIG_BAUDRATE);
R0.H = HI(CONFIG_BAUDRATE);
call _serial_set_baud;
#endif
.endm
/* Since we embed the string right into our .text section, we need
* to find its address. We do this by getting our PC and adding 2
* bytes (which is the length of the jump instruction). Then we
* pass this address to serial_puts().
*/
#ifdef CONFIG_DEBUG_EARLY_SERIAL
# define serial_early_puts(str) \
.section .rodata; \
7: \
.ascii "Early:"; \
.ascii __FILE__; \
.ascii ": "; \
.ascii str; \
.asciz "\n"; \
.previous; \
R0.L = 7b; \
R0.H = 7b; \
call _serial_puts;
#else
# define serial_early_puts(str)
#endif
#endif
#endif
|
