1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
|
/*
* Author :
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* Based on mem.c and sdrc.c
*
* Copyright (C) 2010
* Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/emif4.h>
extern omap3_sysinfo sysinfo;
static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE;
/*
* is_mem_sdr -
* - Return 1 if mem type in use is SDR
*/
u32 is_mem_sdr(void)
{
return 0;
}
/*
* get_sdr_cs_size -
* - Get size of chip select 0/1
*/
u32 get_sdr_cs_size(u32 cs)
{
u32 size = 0;
/* TODO: Calculate the size based on EMIF4 configuration */
if (cs == CS0)
size = CONFIG_SYS_CS0_SIZE;
return size;
}
/*
* get_sdr_cs_offset -
* - Get offset of cs from cs0 start
*/
u32 get_sdr_cs_offset(u32 cs)
{
u32 offset = 0;
return offset;
}
/*
* do_emif4_init -
* - Init the emif4 module for DDR access
* - Early init routines, called from flash or SRAM.
*/
void do_emif4_init(void)
{
unsigned int regval;
/* Set the DDR PHY parameters in PHY ctrl registers */
regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS |
EMIF4_DDR1_EXT_STRB_DIS);
writel(regval, &emif4_base->ddr_phyctrl1);
writel(regval, &emif4_base->ddr_phyctrl1_shdw);
writel(0, &emif4_base->ddr_phyctrl2);
/* Reset the DDR PHY and wait till completed */
regval = readl(&emif4_base->sdram_iodft_tlgc);
regval |= (1<<10);
writel(regval, &emif4_base->sdram_iodft_tlgc);
/*Wait till that bit clears*/
while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1);
/*Re-verify the DDR PHY status*/
while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0);
regval |= (1<<0);
writel(regval, &emif4_base->sdram_iodft_tlgc);
/* Set SDR timing registers */
regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD |
EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS |
EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD |
EMIF4_TIM1_T_RP);
writel(regval, &emif4_base->sdram_time1);
writel(regval, &emif4_base->sdram_time1_shdw);
regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP |
EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR |
EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP);
writel(regval, &emif4_base->sdram_time2);
writel(regval, &emif4_base->sdram_time2_shdw);
regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC);
writel(regval, &emif4_base->sdram_time3);
writel(regval, &emif4_base->sdram_time3_shdw);
/* Set the PWR control register */
regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE |
EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE);
writel(regval, &emif4_base->sdram_pwr_mgmt);
writel(regval, &emif4_base->sdram_pwr_mgmt_shdw);
/* Set the DDR refresh rate control register */
regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS);
writel(regval, &emif4_base->sdram_refresh_ctrl);
writel(regval, &emif4_base->sdram_refresh_ctrl_shdw);
/* set the SDRAM configuration register */
regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK |
EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE |
EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD |
EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL |
EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM |
EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP);
writel(regval, &emif4_base->sdram_config);
}
/*
* dram_init -
* - Sets uboots idea of sdram size
*/
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
/*
* If a second bank of DDR is attached to CS1 this is
* where it can be started. Early init code will init
* memory on CS0.
*/
if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED))
size1 = get_sdr_cs_size(CS1);
gd->ram_size = size0 + size1;
return 0;
}
void dram_init_banksize (void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
size1 = get_sdr_cs_size(CS1);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = size0;
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
gd->bd->bi_dram[1].size = size1;
}
/*
* mem_init() -
* - Initialize memory subsystem
*/
void mem_init(void)
{
do_emif4_init();
}
|
