path: root/arch/arm/cpu/armv7/omap-common/hwinit-common.c

/*
 *
 * Common functions for OMAP4/5 based boards
 *
 * (C) Copyright 2010
 * Texas Instruments, <www.ti.com>
 *
 * Author :
 *	Aneesh V	<aneesh@ti.com>
 *	Steve Sakoman	<steve@sakoman.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
#include <asm/emif.h>
#include <asm/omap_common.h>

DECLARE_GLOBAL_DATA_PTR;

/*
 * This is used to verify if the configuration header
 * was executed by rom code prior to control of transfer
 * to the bootloader. SPL is responsible for saving and
 * passing the boot_params pointer to the u-boot.
 */
struct omap_boot_parameters boot_params __attribute__ ((section(".data")));

#ifdef CONFIG_SPL_BUILD
/*
 * We use static variables because global data is not ready yet.
 * Initialized data is available in SPL right from the beginning.
 * We would not typically need to save these parameters in regular
 * U-Boot. This is needed only in SPL at the moment.
 */
u32 omap_bootmode = MMCSD_MODE_FAT;

u32 omap_boot_device(void)
{
	return (u32) (boot_params.omap_bootdevice);
}

u32 omap_boot_mode(void)
{
	return omap_bootmode;
}
#endif

void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
{
	int i;
	struct pad_conf_entry *pad = (struct pad_conf_entry *) array;

	for (i = 0; i < size; i++, pad++)
		writew(pad->val, base + pad->offset);
}

static void set_mux_conf_regs(void)
{
	switch (omap_hw_init_context()) {
	case OMAP_INIT_CONTEXT_SPL:
		set_muxconf_regs_essential();
		break;
	case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
#ifdef CONFIG_SYS_ENABLE_PADS_ALL
		set_muxconf_regs_non_essential();
#endif
		break;
	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
		set_muxconf_regs_essential();
#ifdef CONFIG_SYS_ENABLE_PADS_ALL
		set_muxconf_regs_non_essential();
#endif
		break;
	}
}

u32 cortex_rev(void)
{

	unsigned int rev;

	/* Read Main ID Register (MIDR) */
	asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));

	return rev;
}

void omap_rev_string(char *omap_rev_string)
{
	u32 omap_rev = omap_revision();
	u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
	u32 major_rev = (omap_rev & 0x00000F00) >> 8;
	u32 minor_rev = (omap_rev & 0x000000F0) >> 4;

	sprintf(omap_rev_string, "OMAP%x ES%x.%x", omap_variant, major_rev,
		minor_rev);
}

#ifdef CONFIG_SPL_BUILD
static void init_boot_params(void)
{
	boot_params_ptr = (u32 *) &boot_params;
}
#endif

/*
 * Routine: s_init
 * Description: Does early system init of watchdog, muxing,  andclocks
 * Watchdog disable is done always. For the rest what gets done
 * depends on the boot mode in which this function is executed
 *   1. s_init of SPL running from SRAM
 *   2. s_init of U-Boot running from FLASH
 *   3. s_init of U-Boot loaded to SDRAM by SPL
 *   4. s_init of U-Boot loaded to SDRAM by ROM code using the
 *	Configuration Header feature
 * Please have a look at the respective functions to see what gets
 * done in each of these cases
 * This function is called with SRAM stack.
 */
void s_init(void)
{
	init_omap_revision();
	watchdog_init();
	set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
	setup_clocks_for_console();
	preloader_console_init();
	do_io_settings();
#endif
	prcm_init();
#ifdef CONFIG_SPL_BUILD
	/* For regular u-boot sdram_init() is called from dram_init() */
	sdram_init();
	init_boot_params();
#endif
}

/*
 * Routine: wait_for_command_complete
 * Description: Wait for posting to finish on watchdog
 */
void wait_for_command_complete(struct watchdog *wd_base)
{
	int pending = 1;
	do {
		pending = readl(&wd_base->wwps);
	} while (pending);
}

/*
 * Routine: watchdog_init
 * Description: Shut down watch dogs
 */
void watchdog_init(void)
{
	struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;

	writel(WD_UNLOCK1, &wd2_base->wspr);
	wait_for_command_complete(wd2_base);
	writel(WD_UNLOCK2, &wd2_base->wspr);
}


/*
 * This function finds the SDRAM size available in the system
 * based on DMM section configurations
 * This is needed because the size of memory installed may be
 * different on different versions of the board
 */
u32 omap_sdram_size(void)
{
	u32 section, i, total_size = 0, size, addr;

	for (i = 0; i < 4; i++) {
		section	= __raw_readl(DMM_BASE + i*4);
		addr = section & EMIF_SYS_ADDR_MASK;
		/* See if the address is valid */
		if ((addr >= DRAM_ADDR_SPACE_START) &&
		    (addr < DRAM_ADDR_SPACE_END)) {
			size = ((section & EMIF_SYS_SIZE_MASK) >>
				   EMIF_SYS_SIZE_SHIFT);
			size = 1 << size;
			size *= SZ_16M;
			total_size += size;
		}
	}

	return total_size;
}


/*
 * Routine: dram_init
 * Description: sets uboots idea of sdram size
 */
int dram_init(void)
{
	sdram_init();
	gd->ram_size = omap_sdram_size();
	return 0;
}

/*
 * Print board information
 */
int checkboard(void)
{
	puts(sysinfo.board_string);
	return 0;
}

/*
* This function is called by start_armboot. You can reliably use static
* data. Any boot-time function that require static data should be
* called from here
*/
int arch_cpu_init(void)
{
	return 0;
}

/*
 *  get_device_type(): tell if GP/HS/EMU/TST
 */
u32 get_device_type(void)
{
	return 0;
}

/*
 * Print CPU information
 */
int print_cpuinfo(void)
{
	char rev_string_buffer[50];

	omap_rev_string(rev_string_buffer);
	printf("CPU  : %s\n", rev_string_buffer);

	return 0;
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
	/* Enable D-cache. I-cache is already enabled in start.S */
	dcache_enable();
}
#endif