/* * (C) Copyright 2001, 2002, 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * Keith Outwater, keith_outwater@mvis.com` * Steven Scholz, steven.scholz@imc-berlin.de * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) * DS1374 Real Time Clock (RTC). * * based on ds1337.c */ #include <common.h> #include <command.h> #include <rtc.h> #include <i2c.h> #if (defined(CONFIG_RTC_DS1374)) && (CONFIG_COMMANDS & CFG_CMD_DATE) /*---------------------------------------------------------------------*/ #undef DEBUG_RTC #define DEBUG_RTC #ifdef DEBUG_RTC #define DEBUGR(fmt,args...) printf(fmt ,##args) #else #define DEBUGR(fmt,args...) #endif /*---------------------------------------------------------------------*/ #ifndef CFG_I2C_RTC_ADDR # define CFG_I2C_RTC_ADDR 0x68 #endif #if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000) # error The DS1374 is specified up to 400kHz in fast mode! #endif /* * RTC register addresses */ #define RTC_TOD_CNT_BYTE0_ADDR 0x00 /* TimeOfDay */ #define RTC_TOD_CNT_BYTE1_ADDR 0x01 #define RTC_TOD_CNT_BYTE2_ADDR 0x02 #define RTC_TOD_CNT_BYTE3_ADDR 0x03 #define RTC_WD_ALM_CNT_BYTE0_ADDR 0x04 #define RTC_WD_ALM_CNT_BYTE1_ADDR 0x05 #define RTC_WD_ALM_CNT_BYTE2_ADDR 0x06 #define RTC_CTL_ADDR 0x07 /* RTC-CoNTrol-register */ #define RTC_SR_ADDR 0x08 /* RTC-StatusRegister */ #define RTC_TCS_DS_ADDR 0x09 /* RTC-TrickleChargeSelect DiodeSelect-register */ #define RTC_CTL_BIT_AIE (1<<0) /* Bit 0 - Alarm Interrupt enable */ #define RTC_CTL_BIT_RS1 (1<<1) /* Bit 1/2 - Rate Select square wave output */ #define RTC_CTL_BIT_RS2 (1<<2) /* Bit 2/2 - Rate Select square wave output */ #define RTC_CTL_BIT_WDSTR (1<<3) /* Bit 3 - Watchdog Reset Steering */ #define RTC_CTL_BIT_BBSQW (1<<4) /* Bit 4 - Battery-Backed Square-Wave */ #define RTC_CTL_BIT_WD_ALM (1<<5) /* Bit 5 - Watchdoc/Alarm Counter Select */ #define RTC_CTL_BIT_WACE (1<<6) /* Bit 6 - Watchdog/Alarm Counter Enable WACE*/ #define RTC_CTL_BIT_EN_OSC (1<<7) /* Bit 7 - Enable Oscilator */ #define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */ #define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */ typedef unsigned char boolean_t; #ifndef TRUE #define TRUE ((boolean_t)(0==0)) #endif #ifndef FALSE #define FALSE (!TRUE) #endif const char RtcTodAddr[] = { RTC_TOD_CNT_BYTE0_ADDR, RTC_TOD_CNT_BYTE1_ADDR, RTC_TOD_CNT_BYTE2_ADDR, RTC_TOD_CNT_BYTE3_ADDR }; static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val, boolean_t set); static void rtc_write_raw (uchar reg, uchar val); /* * Get the current time from the RTC */ void rtc_get (struct rtc_time *tm){ unsigned long time1, time2; unsigned int limit; unsigned char tmp; unsigned int i; /* * Since the reads are being performed one byte at a time, * there is a chance that a carry will occur during the read. * To detect this, 2 reads are performed and compared. */ limit = 10; do { i = 4; time1 = 0; while (i--) { tmp = rtc_read(RtcTodAddr[i]); time1 = (time1 << 8) | (tmp & 0xff); } i = 4; time2 = 0; while (i--) { tmp = rtc_read(RtcTodAddr[i]); time2 = (time2 << 8) | (tmp & 0xff); } } while ((time1 != time2) && limit--); if (time1 != time2) { printf("can't get consistent time from rtc chip\n"); } DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1); to_tm(time1, tm); /* To Gregorian Date */ if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF) printf ("### Warning: RTC oscillator has stopped\n"); DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); } /* * Set the RTC */ void rtc_set (struct rtc_time *tmp){ unsigned long time; unsigned i; DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); if (tmp->tm_year < 1970 || tmp->tm_year > 2069) printf("WARNING: year should be between 1970 and 2069!\n"); time = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time); /* write to RTC_TOD_CNT_BYTEn_ADDR */ for (i = 0; i <= 3; i++) { rtc_write_raw(RtcTodAddr[i], (unsigned char)(time & 0xff)); time = time >> 8; } /* Start clock */ rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE); } /* * Reset the RTC. We setting the date back to 1970-01-01. * We also enable the oscillator output on the SQW/OUT pin and program * it for 32,768 Hz output. Note that according to the datasheet, turning * on the square wave output increases the current drain on the backup * battery to something between 480nA and 800nA. */ void rtc_reset (void){ struct rtc_time tmp; /* clear status flags */ rtc_write (RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), FALSE); /* clearing OSF and AF */ /* Initialise DS1374 oriented to MPC8349E-ADS */ rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC |RTC_CTL_BIT_WACE |RTC_CTL_BIT_AIE), FALSE);/* start osc, disable WACE, clear AIE - set to 0 */ rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM |RTC_CTL_BIT_WDSTR |RTC_CTL_BIT_RS1 |RTC_CTL_BIT_RS2 |RTC_CTL_BIT_BBSQW), TRUE);/* disable WD/ALM, WDSTR set to INT-pin, set BBSQW and SQW to 32k - set to 1 */ tmp.tm_year = 1970; tmp.tm_mon = 1; tmp.tm_mday= 1; tmp.tm_hour = 0; tmp.tm_min = 0; tmp.tm_sec = 0; rtc_set(&tmp); printf("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n", tmp.tm_year, tmp.tm_mon, tmp.tm_mday, tmp.tm_hour, tmp.tm_min, tmp.tm_sec); rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAC, TRUE); rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR,0xDE, TRUE); rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAD, TRUE); } /* * Helper functions */ static uchar rtc_read (uchar reg) { return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val, boolean_t set) { if (set == TRUE) { val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg); i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); } else { val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val; i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); } } static void rtc_write_raw (uchar reg, uchar val) { i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); } #endif /* (CONFIG_RTC_DS1374) && (CFG_COMMANDS & CFG_CMD_DATE) */