/* * (C) Copyright 2002 SIXNET, dge@sixnetio.com. * * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> * Stephan Linz <linz@li-pro.net> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Date & Time support for DS1306 RTC using SPI: * * - SXNI855T: it uses its own soft SPI here in this file * - all other: use the external spi_xfer() function * (see include/spi.h) */ #include <common.h> #include <command.h> #include <rtc.h> #include <spi.h> #if defined(CONFIG_RTC_DS1306) && (CONFIG_COMMANDS & CFG_CMD_DATE) #define RTC_SECONDS 0x00 #define RTC_MINUTES 0x01 #define RTC_HOURS 0x02 #define RTC_DAY_OF_WEEK 0x03 #define RTC_DATE_OF_MONTH 0x04 #define RTC_MONTH 0x05 #define RTC_YEAR 0x06 #define RTC_SECONDS_ALARM0 0x07 #define RTC_MINUTES_ALARM0 0x08 #define RTC_HOURS_ALARM0 0x09 #define RTC_DAY_OF_WEEK_ALARM0 0x0a #define RTC_SECONDS_ALARM1 0x0b #define RTC_MINUTES_ALARM1 0x0c #define RTC_HOURS_ALARM1 0x0d #define RTC_DAY_OF_WEEK_ALARM1 0x0e #define RTC_CONTROL 0x0f #define RTC_STATUS 0x10 #define RTC_TRICKLE_CHARGER 0x11 #define RTC_USER_RAM_BASE 0x20 /* * External table of chip select functions (see the appropriate board * support for the actual definition of the table). */ extern spi_chipsel_type spi_chipsel[]; extern int spi_chipsel_cnt; static unsigned int bin2bcd (unsigned int n); static unsigned char bcd2bin (unsigned char c); /* ************************************************************************* */ #ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */ static void soft_spi_send (unsigned char n); static unsigned char soft_spi_read (void); static void init_spi (void); /*----------------------------------------------------------------------- * Definitions */ #define PB_SPISCK 0x00000002 /* PB 30 */ #define PB_SPIMOSI 0x00000004 /* PB 29 */ #define PB_SPIMISO 0x00000008 /* PB 28 */ #define PB_SPI_CE 0x00010000 /* PB 15 */ /* ------------------------------------------------------------------------- */ /* read clock time from DS1306 and return it in *tmp */ void rtc_get (struct rtc_time *tmp) { volatile immap_t *immap = (immap_t *) CFG_IMMR; unsigned char spi_byte; /* Data Byte */ init_spi (); /* set port B for software SPI */ /* Now we can enable the DS1306 RTC */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; udelay (10); /* Shift out the address (0) of the time in the Clock Chip */ soft_spi_send (0); /* Put the clock readings into the rtc_time structure */ tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */ tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */ /* Hours are trickier */ spi_byte = soft_spi_read (); /* Read Hours into temporary value */ if (spi_byte & 0x40) { /* 12 hour mode bit is set (time is in 1-12 format) */ if (spi_byte & 0x20) { /* since PM we add 11 to get 0-23 for hours */ tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11; } else { /* since AM we subtract 1 to get 0-23 for hours */ tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1; } } else { /* Otherwise, 0-23 hour format */ tmp->tm_hour = (bcd2bin (spi_byte & 0x3F)); } soft_spi_read (); /* Read and discard Day of week */ tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */ tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */ /* Read Year and convert to this century */ tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000; /* Now we can disable the DS1306 RTC */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ udelay (10); GregorianDay (tmp); /* Determine the day of week */ debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); } /* ------------------------------------------------------------------------- */ /* set clock time in DS1306 RTC and in MPC8xx RTC */ void rtc_set (struct rtc_time *tmp) { volatile immap_t *immap = (immap_t *) CFG_IMMR; init_spi (); /* set port B for software SPI */ /* Now we can enable the DS1306 RTC */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ udelay (10); /* First disable write protect in the clock chip control register */ soft_spi_send (0x8F); /* send address of the control register */ soft_spi_send (0x00); /* send control register contents */ /* Now disable the DS1306 to terminate the write */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; udelay (10); /* Now enable the DS1306 to initiate a new write */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; udelay (10); /* Next, send the address of the clock time write registers */ soft_spi_send (0x80); /* send address of the first time register */ /* Use Burst Mode to send all of the time data to the clock */ bin2bcd (tmp->tm_sec); soft_spi_send (bin2bcd (tmp->tm_sec)); /* Send Seconds */ soft_spi_send (bin2bcd (tmp->tm_min)); /* Send Minutes */ soft_spi_send (bin2bcd (tmp->tm_hour)); /* Send Hour */ soft_spi_send (bin2bcd (tmp->tm_wday)); /* Send Day of the Week */ soft_spi_send (bin2bcd (tmp->tm_mday)); /* Send Day of Month */ soft_spi_send (bin2bcd (tmp->tm_mon)); /* Send Month */ soft_spi_send (bin2bcd (tmp->tm_year - 2000)); /* Send Year */ /* Now we can disable the Clock chip to terminate the burst write */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ udelay (10); /* Now we can enable the Clock chip to initiate a new write */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ udelay (10); /* First we Enable write protect in the clock chip control register */ soft_spi_send (0x8F); /* send address of the control register */ soft_spi_send (0x40); /* send out Control Register contents */ /* Now disable the DS1306 */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ udelay (10); /* Set standard MPC8xx clock to the same time so Linux will * see the time even if it doesn't have a DS1306 clock driver. * This helps with experimenting with standard kernels. */ { ulong tim; tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); immap->im_sitk.sitk_rtck = KAPWR_KEY; immap->im_sit.sit_rtc = tim; } debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); } /* ------------------------------------------------------------------------- */ /* Initialize Port B for software SPI */ static void init_spi (void) { volatile immap_t *immap = (immap_t *) CFG_IMMR; /* Force output pins to begin at logic 0 */ immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK); /* Set these 3 signals as outputs */ immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK); immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */ udelay (10); } /* ------------------------------------------------------------------------- */ /* NOTE: soft_spi_send() assumes that the I/O lines are configured already */ static void soft_spi_send (unsigned char n) { volatile immap_t *immap = (immap_t *) CFG_IMMR; unsigned char bitpos; /* bit position to receive */ unsigned char i; /* Loop Control */ /* bit position to send, start with most significant bit */ bitpos = 0x80; /* Send 8 bits to software SPI */ for (i = 0; i < 8; i++) { /* Loop for 8 bits */ immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */ if (n & bitpos) immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */ else immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */ udelay (10); immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ udelay (10); bitpos >>= 1; /* Shift for next bit position */ } } /* ------------------------------------------------------------------------- */ /* NOTE: soft_spi_read() assumes that the I/O lines are configured already */ static unsigned char soft_spi_read (void) { volatile immap_t *immap = (immap_t *) CFG_IMMR; unsigned char spi_byte = 0; /* Return value, assume success */ unsigned char bitpos; /* bit position to receive */ unsigned char i; /* Loop Control */ /* bit position to receive, start with most significant bit */ bitpos = 0x80; /* Read 8 bits here */ for (i = 0; i < 8; i++) { /* Do 8 bits in loop */ immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */ udelay (10); if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */ spi_byte |= bitpos; /* Set data accordingly */ immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ udelay (10); bitpos >>= 1; /* Shift for next bit position */ } return spi_byte; /* Return the byte read */ } /* ------------------------------------------------------------------------- */ void rtc_reset (void) { return; /* nothing to do */ } #else /* not CONFIG_SXNI855T */ /* ************************************************************************* */ static unsigned char rtc_read (unsigned char reg); static void rtc_write (unsigned char reg, unsigned char val); /* read clock time from DS1306 and return it in *tmp */ void rtc_get (struct rtc_time *tmp) { unsigned char sec, min, hour, mday, wday, mon, year; sec = rtc_read (RTC_SECONDS); min = rtc_read (RTC_MINUTES); hour = rtc_read (RTC_HOURS); mday = rtc_read (RTC_DATE_OF_MONTH); wday = rtc_read (RTC_DAY_OF_WEEK); mon = rtc_read (RTC_MONTH); year = rtc_read (RTC_YEAR); debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x " "hr: %02x min: %02x sec: %02x\n", year, mon, mday, wday, hour, min, sec); debug ("Alarms[0]: wday: %02x hour: %02x min: %02x sec: %02x\n", rtc_read (RTC_DAY_OF_WEEK_ALARM0), rtc_read (RTC_HOURS_ALARM0), rtc_read (RTC_MINUTES_ALARM0), rtc_read (RTC_SECONDS_ALARM0)); debug ("Alarms[1]: wday: %02x hour: %02x min: %02x sec: %02x\n", rtc_read (RTC_DAY_OF_WEEK_ALARM1), rtc_read (RTC_HOURS_ALARM1), rtc_read (RTC_MINUTES_ALARM1), rtc_read (RTC_SECONDS_ALARM1)); tmp->tm_sec = bcd2bin (sec & 0x7F); /* convert Seconds */ tmp->tm_min = bcd2bin (min & 0x7F); /* convert Minutes */ /* convert Hours */ tmp->tm_hour = (hour & 0x40) ? ((hour & 0x20) /* 12 hour mode */ ? bcd2bin (hour & 0x1F) + 11 /* PM */ : bcd2bin (hour & 0x1F) - 1 /* AM */ ) : bcd2bin (hour & 0x3F); /* 24 hour mode */ tmp->tm_mday = bcd2bin (mday & 0x3F); /* convert Day of the Month */ tmp->tm_mon = bcd2bin (mon & 0x1F); /* convert Month */ tmp->tm_year = bcd2bin (year) + 2000; /* convert Year */ tmp->tm_wday = bcd2bin (wday & 0x07) - 1; /* convert Day of the Week */ tmp->tm_yday = 0; tmp->tm_isdst = 0; debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); } /* ------------------------------------------------------------------------- */ /* set clock time from *tmp in DS1306 RTC */ void rtc_set (struct rtc_time *tmp) { debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000)); rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon)); rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday)); rtc_write (RTC_DAY_OF_WEEK, bin2bcd (tmp->tm_wday + 1)); rtc_write (RTC_HOURS, bin2bcd (tmp->tm_hour)); rtc_write (RTC_MINUTES, bin2bcd (tmp->tm_min)); rtc_write (RTC_SECONDS, bin2bcd (tmp->tm_sec)); } /* ------------------------------------------------------------------------- */ /* reset the DS1306 */ void rtc_reset (void) { /* clear the control register */ rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */ rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */ /* reset all alarms */ rtc_write (RTC_SECONDS_ALARM0, 0x00); rtc_write (RTC_SECONDS_ALARM1, 0x00); rtc_write (RTC_MINUTES_ALARM0, 0x00); rtc_write (RTC_MINUTES_ALARM1, 0x00); rtc_write (RTC_HOURS_ALARM0, 0x00); rtc_write (RTC_HOURS_ALARM1, 0x00); rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00); rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00); } /* ------------------------------------------------------------------------- */ static unsigned char rtc_read (unsigned char reg) { unsigned char dout[2]; /* SPI Output Data Bytes */ unsigned char din[2]; /* SPI Input Data Bytes */ dout[0] = reg; if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) { return 0; } else { return din[1]; } } /* ------------------------------------------------------------------------- */ static void rtc_write (unsigned char reg, unsigned char val) { unsigned char dout[2]; /* SPI Output Data Bytes */ unsigned char din[2]; /* SPI Input Data Bytes */ dout[0] = 0x80 | reg; dout[1] = val; spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din); } #endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */ /* ------------------------------------------------------------------------- */ static unsigned char bcd2bin (unsigned char n) { return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); } /* ------------------------------------------------------------------------- */ static unsigned int bin2bcd (unsigned int n) { return (((n / 10) << 4) | (n % 10)); } /* ------------------------------------------------------------------------- */ #endif