/* * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <watchdog.h> #include <command.h> #include <malloc.h> #include <devices.h> #ifdef CONFIG_8xx #include <mpc8xx.h> #endif #ifdef CONFIG_5xx #include <mpc5xx.h> #endif #ifdef CONFIG_MPC5xxx #include <mpc5xxx.h> #endif #if defined(CONFIG_CMD_IDE) #include <ide.h> #endif #if defined(CONFIG_CMD_SATA) #include <sata.h> #endif #if defined(CONFIG_CMD_SCSI) #include <scsi.h> #endif #if defined(CONFIG_CMD_KGDB) #include <kgdb.h> #endif #ifdef CONFIG_STATUS_LED #include <status_led.h> #endif #include <net.h> #include <serial.h> #ifdef CONFIG_SYS_ALLOC_DPRAM #if !defined(CONFIG_CPM2) #include <commproc.h> #endif #endif #include <version.h> #if defined(CONFIG_BAB7xx) #include <w83c553f.h> #endif #include <dtt.h> #if defined(CONFIG_POST) #include <post.h> #endif #if defined(CONFIG_LOGBUFFER) #include <logbuff.h> #endif #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) #include <asm/cache.h> #endif #ifdef CONFIG_PS2KBD #include <keyboard.h> #endif #ifdef CONFIG_ADDR_MAP #include <asm/mmu.h> #endif #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE extern int update_flash_size (int flash_size); #endif #if defined(CONFIG_SC3) extern void sc3_read_eeprom(void); #endif #if defined(CONFIG_CMD_DOC) void doc_init (void); #endif #if defined(CONFIG_HARD_I2C) || \ defined(CONFIG_SOFT_I2C) #include <i2c.h> #endif #include <spi.h> #include <nand.h> static char *failed = "*** failed ***\n"; #if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU) extern flash_info_t flash_info[]; #endif #if defined(CONFIG_START_IDE) extern int board_start_ide(void); #endif #include <environment.h> DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_ENV_IS_EMBEDDED) #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ defined(CONFIG_ENV_IS_IN_NVRAM) #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) #else #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #endif #if !defined(CONFIG_SYS_MEM_TOP_HIDE) #define CONFIG_SYS_MEM_TOP_HIDE 0 #endif extern ulong __init_end; extern ulong _end; ulong monitor_flash_len; #if defined(CONFIG_CMD_BEDBUG) #include <bedbug/type.h> #endif /* * Begin and End of memory area for malloc(), and current "brk" */ static ulong mem_malloc_start = 0; static ulong mem_malloc_end = 0; static ulong mem_malloc_brk = 0; /************************************************************************ * Utilities * ************************************************************************ */ /* * The Malloc area is immediately below the monitor copy in DRAM */ static void mem_malloc_init (void) { #if !defined(CONFIG_RELOC_FIXUP_WORKS) mem_malloc_end = CONFIG_SYS_MONITOR_BASE + gd->reloc_off; #endif mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN; mem_malloc_brk = mem_malloc_start; memset ((void *) mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); } void *sbrk (ptrdiff_t increment) { ulong old = mem_malloc_brk; ulong new = old + increment; if ((new < mem_malloc_start) || (new > mem_malloc_end)) { return (NULL); } mem_malloc_brk = new; return ((void *) old); } /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the * requirements are just _too_ different. To get rid of the resulting * mess of board dependend #ifdef'ed code we now make the whole * initialization sequence configurable to the user. * * The requirements for any new initalization function is simple: it * receives a pointer to the "global data" structure as it's only * argument, and returns an integer return code, where 0 means * "continue" and != 0 means "fatal error, hang the system". */ typedef int (init_fnc_t) (void); /************************************************************************ * Init Utilities * ************************************************************************ * Some of this code should be moved into the core functions, * but let's get it working (again) first... */ static int init_baudrate (void) { char tmp[64]; /* long enough for environment variables */ int i = getenv_r ("baudrate", tmp, sizeof (tmp)); gd->baudrate = (i > 0) ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; return (0); } /***********************************************************************/ void __board_add_ram_info(int use_default) { /* please define platform specific board_add_ram_info() */ } void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); static int init_func_ram (void) { #ifdef CONFIG_BOARD_TYPES int board_type = gd->board_type; #else int board_type = 0; /* use dummy arg */ #endif puts ("DRAM: "); if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); board_add_ram_info(0); putc('\n'); return (0); } puts (failed); return (1); } /***********************************************************************/ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) static int init_func_i2c (void) { puts ("I2C: "); i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); puts ("ready\n"); return (0); } #endif #if defined(CONFIG_HARD_SPI) static int init_func_spi (void) { puts ("SPI: "); spi_init (); puts ("ready\n"); return (0); } #endif /***********************************************************************/ #if defined(CONFIG_WATCHDOG) static int init_func_watchdog_init (void) { puts (" Watchdog enabled\n"); WATCHDOG_RESET (); return (0); } # define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init, static int init_func_watchdog_reset (void) { WATCHDOG_RESET (); return (0); } # define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset, #else # define INIT_FUNC_WATCHDOG_INIT /* undef */ # define INIT_FUNC_WATCHDOG_RESET /* undef */ #endif /* CONFIG_WATCHDOG */ /************************************************************************ * Initialization sequence * ************************************************************************ */ init_fnc_t *init_sequence[] = { #if defined(CONFIG_BOARD_EARLY_INIT_F) board_early_init_f, #endif #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) get_clocks, /* get CPU and bus clocks (etc.) */ #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \ && !defined(CONFIG_TQM885D) adjust_sdram_tbs_8xx, #endif init_timebase, #endif #ifdef CONFIG_SYS_ALLOC_DPRAM #if !defined(CONFIG_CPM2) dpram_init, #endif #endif #if defined(CONFIG_BOARD_POSTCLK_INIT) board_postclk_init, #endif env_init, #if defined(CONFIG_8xx_CPUCLK_DEFAULT) get_clocks_866, /* get CPU and bus clocks according to the environment variable */ sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */ init_timebase, #endif init_baudrate, serial_init, console_init_f, display_options, #if defined(CONFIG_8260) prt_8260_rsr, prt_8260_clks, #endif /* CONFIG_8260 */ #if defined(CONFIG_MPC83XX) prt_83xx_rsr, #endif checkcpu, #if defined(CONFIG_MPC5xxx) prt_mpc5xxx_clks, #endif /* CONFIG_MPC5xxx */ #if defined(CONFIG_MPC8220) prt_mpc8220_clks, #endif checkboard, INIT_FUNC_WATCHDOG_INIT #if defined(CONFIG_MISC_INIT_F) misc_init_f, #endif INIT_FUNC_WATCHDOG_RESET #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) init_func_i2c, #endif #if defined(CONFIG_HARD_SPI) init_func_spi, #endif #if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */ dtt_init, #endif #ifdef CONFIG_POST post_init_f, #endif INIT_FUNC_WATCHDOG_RESET init_func_ram, #if defined(CONFIG_SYS_DRAM_TEST) testdram, #endif /* CONFIG_SYS_DRAM_TEST */ INIT_FUNC_WATCHDOG_RESET NULL, /* Terminate this list */ }; #ifndef CONFIG_MAX_MEM_MAPPED #define CONFIG_MAX_MEM_MAPPED (256 << 20) #endif ulong get_effective_memsize(void) { #ifndef CONFIG_VERY_BIG_RAM return gd->ram_size; #else /* limit stack to what we can reasonable map */ return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? CONFIG_MAX_MEM_MAPPED : gd->ram_size); #endif } /************************************************************************ * * This is the first part of the initialization sequence that is * implemented in C, but still running from ROM. * * The main purpose is to provide a (serial) console interface as * soon as possible (so we can see any error messages), and to * initialize the RAM so that we can relocate the monitor code to * RAM. * * Be aware of the restrictions: global data is read-only, BSS is not * initialized, and stack space is limited to a few kB. * ************************************************************************ */ #ifdef CONFIG_LOGBUFFER unsigned long logbuffer_base(void) { return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN; } #endif void board_init_f (ulong bootflag) { bd_t *bd; ulong len, addr, addr_sp; ulong *s; gd_t *id; init_fnc_t **init_fnc_ptr; #ifdef CONFIG_PRAM int i; ulong reg; uchar tmp[64]; /* long enough for environment variables */ #endif /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX) && \ !defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx) /* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t)); #endif for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr) () != 0) { hang (); } } /* * Now that we have DRAM mapped and working, we can * relocate the code and continue running from DRAM. * * Reserve memory at end of RAM for (top down in that order): * - area that won't get touched by U-Boot and Linux (optional) * - kernel log buffer * - protected RAM * - LCD framebuffer * - monitor code * - board info struct */ len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE; /* * Subtract specified amount of memory to hide so that it won't * get "touched" at all by U-Boot. By fixing up gd->ram_size * the Linux kernel should now get passed the now "corrected" * memory size and won't touch it either. This should work * for arch/ppc and arch/powerpc. Only Linux board ports in * arch/powerpc with bootwrapper support, that recalculate the * memory size from the SDRAM controller setup will have to * get fixed. */ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); #ifdef CONFIG_LOGBUFFER #ifndef CONFIG_ALT_LB_ADDR /* reserve kernel log buffer */ addr -= (LOGBUFF_RESERVE); debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); #endif #endif #ifdef CONFIG_PRAM /* * reserve protected RAM */ i = getenv_r ("pram", (char *)tmp, sizeof (tmp)); reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM; addr -= (reg << 10); /* size is in kB */ debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); #endif /* CONFIG_PRAM */ /* round down to next 4 kB limit */ addr &= ~(4096 - 1); debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); #ifdef CONFIG_LCD /* reserve memory for LCD display (always full pages) */ addr = lcd_setmem (addr); gd->fb_base = addr; #endif /* CONFIG_LCD */ #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx) /* reserve memory for video display (always full pages) */ addr = video_setmem (addr); gd->fb_base = addr; #endif /* CONFIG_VIDEO */ /* * reserve memory for U-Boot code, data & bss * round down to next 4 kB limit */ addr -= len; addr &= ~(4096 - 1); #ifdef CONFIG_E500 /* round down to next 64 kB limit so that IVPR stays aligned */ addr &= ~(65536 - 1); #endif debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); #ifdef CONFIG_AMIGAONEG3SE gd->relocaddr = addr; #endif /* * reserve memory for malloc() arena */ addr_sp = addr - TOTAL_MALLOC_LEN; debug ("Reserving %dk for malloc() at: %08lx\n", TOTAL_MALLOC_LEN >> 10, addr_sp); /* * (permanently) allocate a Board Info struct * and a permanent copy of the "global" data */ addr_sp -= sizeof (bd_t); bd = (bd_t *) addr_sp; gd->bd = bd; debug ("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; debug ("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); /* * Finally, we set up a new (bigger) stack. * * Leave some safety gap for SP, force alignment on 16 byte boundary * Clear initial stack frame */ addr_sp -= 16; addr_sp &= ~0xF; s = (ulong *)addr_sp; *s-- = 0; *s-- = 0; addr_sp = (ulong)s; debug ("Stack Pointer at: %08lx\n", addr_sp); /* * Save local variables to board info struct */ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ #ifdef CONFIG_IP860 bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */ bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */ #elif defined CONFIG_MPC8220 bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */ #else bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */ bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */ #endif #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif #if defined(CONFIG_MPC5xxx) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83XX) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif #if defined(CONFIG_MPC8220) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ bd->bi_inpfreq = gd->inp_clk; bd->bi_pcifreq = gd->pci_clk; bd->bi_vcofreq = gd->vco_clk; bd->bi_pevfreq = gd->pev_clk; bd->bi_flbfreq = gd->flb_clk; /* store bootparam to sram (backward compatible), here? */ { u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE; *sram++ = gd->ram_size; *sram++ = gd->bus_clk; *sram++ = gd->inp_clk; *sram++ = gd->cpu_clk; *sram++ = gd->vco_clk; *sram++ = gd->flb_clk; *sram++ = 0xb8c3ba11; /* boot signature */ } #endif bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ WATCHDOG_RESET (); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ #if defined(CONFIG_CPM2) bd->bi_cpmfreq = gd->cpm_clk; bd->bi_brgfreq = gd->brg_clk; bd->bi_sccfreq = gd->scc_clk; bd->bi_vco = gd->vco_out; #endif /* CONFIG_CPM2 */ #if defined(CONFIG_MPC512X) bd->bi_ipsfreq = gd->ips_clk; #endif /* CONFIG_MPC512X */ #if defined(CONFIG_MPC5xxx) bd->bi_ipbfreq = gd->ipb_clk; bd->bi_pcifreq = gd->pci_clk; #endif /* CONFIG_MPC5xxx */ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CONFIG_SYS_EXTBDINFO strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version)); bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */ bd->bi_plb_busfreq = gd->bus_clk; #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) bd->bi_pci_busfreq = get_PCI_freq (); bd->bi_opbfreq = get_OPB_freq (); #elif defined(CONFIG_XILINX_405) bd->bi_pci_busfreq = get_PCI_freq (); #endif #endif debug ("New Stack Pointer is: %08lx\n", addr_sp); WATCHDOG_RESET (); #ifdef CONFIG_POST post_bootmode_init(); post_run (NULL, POST_ROM | post_bootmode_get(0)); #endif WATCHDOG_RESET(); memcpy (id, (void *)gd, sizeof (gd_t)); relocate_code (addr_sp, id, addr); /* NOTREACHED - relocate_code() does not return */ } int __is_sata_supported(void) { /* For some boards, when sata disabled by the switch, and the * driver still access the sata registers, the cpu will hangup. * please define platform specific is_sata_supported() if your * board have such issue.*/ return 1; } int is_sata_supported(void) __attribute__((weak, alias("__is_sata_supported"))); /************************************************************************ * * This is the next part if the initialization sequence: we are now * running from RAM and have a "normal" C environment, i. e. global * data can be written, BSS has been cleared, the stack size in not * that critical any more, etc. * ************************************************************************ */ void board_init_r (gd_t *id, ulong dest_addr) { cmd_tbl_t *cmdtp; char *s, *e; bd_t *bd; int i; extern void malloc_bin_reloc (void); #ifndef CONFIG_ENV_IS_NOWHERE extern char * env_name_spec; #endif #ifndef CONFIG_SYS_NO_FLASH ulong flash_size; #endif gd = id; /* initialize RAM version of global data */ bd = gd->bd; gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ #if defined(CONFIG_RELOC_FIXUP_WORKS) gd->reloc_off = 0; mem_malloc_end = dest_addr; #else gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; #endif #ifdef CONFIG_SERIAL_MULTI serial_initialize(); #endif debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); WATCHDOG_RESET (); /* * Setup trap handlers */ trap_init (dest_addr); #if defined(CONFIG_ADDR_MAP) && defined(CONFIG_E500) init_addr_map(); #endif #if defined(CONFIG_BOARD_EARLY_INIT_R) board_early_init_r (); #endif monitor_flash_len = (ulong)&__init_end - dest_addr; /* * We have to relocate the command table manually */ for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { ulong addr; addr = (ulong) (cmdtp->cmd) + gd->reloc_off; #if 0 printf ("Command \"%s\": 0x%08lx => 0x%08lx\n", cmdtp->name, (ulong) (cmdtp->cmd), addr); #endif cmdtp->cmd = (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr; addr = (ulong)(cmdtp->name) + gd->reloc_off; cmdtp->name = (char *)addr; if (cmdtp->usage) { addr = (ulong)(cmdtp->usage) + gd->reloc_off; cmdtp->usage = (char *)addr; } #ifdef CONFIG_SYS_LONGHELP if (cmdtp->help) { addr = (ulong)(cmdtp->help) + gd->reloc_off; cmdtp->help = (char *)addr; } #endif } /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE env_name_spec += gd->reloc_off; #endif WATCHDOG_RESET (); #ifdef CONFIG_LOGBUFFER logbuff_init_ptrs (); #endif #ifdef CONFIG_POST post_output_backlog (); post_reloc (); #endif WATCHDOG_RESET(); #if defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || \ defined (CONFIG_FLAGADM) || defined(CONFIG_MPC83XX) icache_enable (); /* it's time to enable the instruction cache */ #endif #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */ #endif #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45) /* * Do PCI configuration on BAB7xx and CPC45 _before_ the flash * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus * bridge there. */ pci_init (); #endif #if defined(CONFIG_BAB7xx) /* * Initialise the ISA bridge */ initialise_w83c553f (); #endif asm ("sync ; isync"); #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); if ((flash_size = flash_init ()) > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM print_size (flash_size, ""); /* * Compute and print flash CRC if flashchecksum is set to 'y' * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ s = getenv ("flashchecksum"); if (s && (*s == 'y')) { printf (" CRC: %08X", crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size) ); } putc ('\n'); # else /* !CONFIG_SYS_FLASH_CHECKSUM */ print_size (flash_size, "\n"); # endif /* CONFIG_SYS_FLASH_CHECKSUM */ } else { puts (failed); hang (); } bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */ bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */ #if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) /* Make a update of the Memctrl. */ update_flash_size (flash_size); #endif # if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU) /* flash mapped at end of memory map */ bd->bi_flashoffset = TEXT_BASE + flash_size; # elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */ # else bd->bi_flashoffset = 0; # endif #else /* CONFIG_SYS_NO_FLASH */ bd->bi_flashsize = 0; bd->bi_flashstart = 0; bd->bi_flashoffset = 0; #endif /* !CONFIG_SYS_NO_FLASH */ WATCHDOG_RESET (); /* initialize higher level parts of CPU like time base and timers */ cpu_init_r (); WATCHDOG_RESET (); /* initialize malloc() area */ mem_malloc_init (); malloc_bin_reloc (); #ifdef CONFIG_SPI # if !defined(CONFIG_ENV_IS_IN_EEPROM) spi_init_f (); # endif spi_init_r (); #endif #if defined(CONFIG_CMD_NAND) WATCHDOG_RESET (); puts ("NAND: "); nand_init(); /* go init the NAND */ #endif /* relocate environment function pointers etc. */ env_relocate (); /* * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, * where had to use getenv_r(), which can be pretty slow when * the environment is in EEPROM. */ #if defined(CONFIG_SYS_EXTBDINFO) #if defined(CONFIG_405GP) || defined(CONFIG_405EP) #if defined(CONFIG_I2CFAST) /* * set bi_iic_fast for linux taking environment variable * "i2cfast" into account */ { char *s = getenv ("i2cfast"); if (s && ((*s == 'y') || (*s == 'Y'))) { bd->bi_iic_fast[0] = 1; bd->bi_iic_fast[1] = 1; } else { bd->bi_iic_fast[0] = 0; bd->bi_iic_fast[1] = 0; } } #else bd->bi_iic_fast[0] = 0; bd->bi_iic_fast[1] = 0; #endif /* CONFIG_I2CFAST */ #endif /* CONFIG_405GP, CONFIG_405EP */ #endif /* CONFIG_SYS_EXTBDINFO */ #if defined(CONFIG_SC3) sc3_read_eeprom(); #endif #if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET) mac_read_from_eeprom(); #endif s = getenv ("ethaddr"); #if defined (CONFIG_MBX) || \ defined (CONFIG_RPXCLASSIC) || \ defined(CONFIG_IAD210) || \ defined(CONFIG_V38B) if (s == NULL) board_get_enetaddr (bd->bi_enetaddr); else #endif for (i = 0; i < 6; ++i) { bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #ifdef CONFIG_HERMES if ((gd->board_type >> 16) == 2) bd->bi_ethspeed = gd->board_type & 0xFFFF; else bd->bi_ethspeed = 0xFFFF; #endif #ifdef CONFIG_NX823 load_sernum_ethaddr (); #endif #ifdef CONFIG_HAS_ETH1 /* handle the 2nd ethernet address */ s = getenv ("eth1addr"); for (i = 0; i < 6; ++i) { bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #endif #ifdef CONFIG_HAS_ETH2 /* handle the 3rd ethernet address */ s = getenv ("eth2addr"); #if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) if (s == NULL) board_get_enetaddr(bd->bi_enet2addr); else #endif for (i = 0; i < 6; ++i) { bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #endif #ifdef CONFIG_HAS_ETH3 /* handle 4th ethernet address */ s = getenv("eth3addr"); #if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) if (s == NULL) board_get_enetaddr(bd->bi_enet3addr); else #endif for (i = 0; i < 6; ++i) { bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #endif #ifdef CONFIG_HAS_ETH4 /* handle 5th ethernet address */ s = getenv("eth4addr"); #if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) if (s == NULL) board_get_enetaddr(bd->bi_enet4addr); else #endif for (i = 0; i < 6; ++i) { bd->bi_enet4addr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #endif #ifdef CONFIG_HAS_ETH5 /* handle 6th ethernet address */ s = getenv("eth5addr"); #if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF) if (s == NULL) board_get_enetaddr(bd->bi_enet5addr); else #endif for (i = 0; i < 6; ++i) { bd->bi_enet5addr[i] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } #endif #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \ defined(CONFIG_TQM8272) || \ defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \ defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP) load_sernum_ethaddr (); #endif /* IP Address */ bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); WATCHDOG_RESET (); #if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45) /* * Do pci configuration */ pci_init (); #endif /** leave this here (after malloc(), environment and PCI are working) **/ /* Initialize devices */ devices_init (); /* Initialize the jump table for applications */ jumptable_init (); #if defined(CONFIG_API) /* Initialize API */ api_init (); #endif /* Initialize the console (after the relocation and devices init) */ console_init_r (); #if defined(CONFIG_CCM) || \ defined(CONFIG_COGENT) || \ defined(CONFIG_CPCI405) || \ defined(CONFIG_EVB64260) || \ defined(CONFIG_KUP4K) || \ defined(CONFIG_KUP4X) || \ defined(CONFIG_LWMON) || \ defined(CONFIG_PCU_E) || \ defined(CONFIG_SC3) || \ defined(CONFIG_W7O) || \ defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ misc_init_r (); #endif #ifdef CONFIG_HERMES if (bd->bi_ethspeed != 0xFFFF) hermes_start_lxt980 ((int) bd->bi_ethspeed); #endif #if defined(CONFIG_CMD_KGDB) WATCHDOG_RESET (); puts ("KGDB: "); kgdb_init (); #endif debug ("U-Boot relocated to %08lx\n", dest_addr); /* * Enable Interrupts */ interrupt_init (); /* Must happen after interrupts are initialized since * an irq handler gets installed */ #ifdef CONFIG_SERIAL_SOFTWARE_FIFO serial_buffered_init(); #endif #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif udelay (20); set_timer (0); /* Initialize from environment */ if ((s = getenv ("loadaddr")) != NULL) { load_addr = simple_strtoul (s, NULL, 16); } #if defined(CONFIG_CMD_NET) if ((s = getenv ("bootfile")) != NULL) { copy_filename (BootFile, s, sizeof (BootFile)); } #endif WATCHDOG_RESET (); #if defined(CONFIG_CMD_SCSI) WATCHDOG_RESET (); puts ("SCSI: "); scsi_init (); #endif #if defined(CONFIG_CMD_DOC) WATCHDOG_RESET (); puts ("DOC: "); doc_init (); #endif #if defined(CONFIG_CMD_NET) #if defined(CONFIG_NET_MULTI) WATCHDOG_RESET (); puts ("Net: "); #endif eth_initialize (bd); #endif #if defined(CONFIG_CMD_NET) && ( \ defined(CONFIG_CCM) || \ defined(CONFIG_ELPT860) || \ defined(CONFIG_EP8260) || \ defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ defined(CONFIG_IVMS8) || \ defined(CONFIG_MPC8260ADS) || \ defined(CONFIG_MPC8266ADS) || \ defined(CONFIG_MPC8560ADS) || \ defined(CONFIG_PCU_E) || \ defined(CONFIG_RPXSUPER) || \ defined(CONFIG_STXGP3) || \ defined(CONFIG_SPD823TS) || \ defined(CONFIG_RESET_PHY_R) ) WATCHDOG_RESET (); debug ("Reset Ethernet PHY\n"); reset_phy (); #endif #ifdef CONFIG_POST post_run (NULL, POST_RAM | post_bootmode_get(0)); #endif #if defined(CONFIG_CMD_PCMCIA) \ && !defined(CONFIG_CMD_IDE) WATCHDOG_RESET (); puts ("PCMCIA:"); pcmcia_init (); #endif #if defined(CONFIG_CMD_IDE) WATCHDOG_RESET (); # ifdef CONFIG_IDE_8xx_PCCARD puts ("PCMCIA:"); # else puts ("IDE: "); #endif #if defined(CONFIG_START_IDE) if (board_start_ide()) ide_init (); #else ide_init (); #endif #endif #if defined(CONFIG_CMD_SATA) if (is_sata_supported()) { puts("SATA: "); sata_initialize(); } #endif #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET (); /* * Some parts can be only initialized if all others (like * Interrupts) are up and running (i.e. the PC-style ISA * keyboard). */ last_stage_init (); #endif #if defined(CONFIG_CMD_BEDBUG) WATCHDOG_RESET (); bedbug_init (); #endif #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) /* * Export available size of memory for Linux, * taking into account the protected RAM at top of memory */ { ulong pram; uchar memsz[32]; #ifdef CONFIG_PRAM char *s; if ((s = getenv ("pram")) != NULL) { pram = simple_strtoul (s, NULL, 10); } else { pram = CONFIG_PRAM; } #else pram=0; #endif #ifdef CONFIG_LOGBUFFER #ifndef CONFIG_ALT_LB_ADDR /* Also take the logbuffer into account (pram is in kB) */ pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; #endif #endif sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram); setenv ("mem", (char *)memsz); } #endif #ifdef CONFIG_PS2KBD puts ("PS/2: "); kbd_init(); #endif #ifdef CONFIG_MODEM_SUPPORT { extern int do_mdm_init; do_mdm_init = gd->do_mdm_init; } #endif /* Initialization complete - start the monitor */ /* main_loop() can return to retry autoboot, if so just run it again. */ for (;;) { WATCHDOG_RESET (); main_loop (); } /* NOTREACHED - no way out of command loop except booting */ } void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); show_boot_progress(-30); for (;;); } #ifdef CONFIG_MODEM_SUPPORT /* called from main loop (common/main.c) */ /* 'inline' - We have to do it fast */ static inline void mdm_readline(char *buf, int bufsiz) { char c; char *p; int n; n = 0; p = buf; for(;;) { c = serial_getc(); /* dbg("(%c)", c); */ switch(c) { case '\r': break; case '\n': *p = '\0'; return; default: if(n++ > bufsiz) { *p = '\0'; return; /* sanity check */ } *p = c; p++; break; } } } extern void dbg(const char *fmt, ...); int mdm_init (void) { char env_str[16]; char *init_str; int i; extern char console_buffer[]; extern void enable_putc(void); extern int hwflow_onoff(int); enable_putc(); /* enable serial_putc() */ #ifdef CONFIG_HWFLOW init_str = getenv("mdm_flow_control"); if (init_str && (strcmp(init_str, "rts/cts") == 0)) hwflow_onoff (1); else hwflow_onoff(-1); #endif for (i = 1;;i++) { sprintf(env_str, "mdm_init%d", i); if ((init_str = getenv(env_str)) != NULL) { serial_puts(init_str); serial_puts("\n"); for(;;) { mdm_readline(console_buffer, CONFIG_SYS_CBSIZE); dbg("ini%d: [%s]", i, console_buffer); if ((strcmp(console_buffer, "OK") == 0) || (strcmp(console_buffer, "ERROR") == 0)) { dbg("ini%d: cmd done", i); break; } else /* in case we are originating call ... */ if (strncmp(console_buffer, "CONNECT", 7) == 0) { dbg("ini%d: connect", i); return 0; } } } else break; /* no init string - stop modem init */ udelay(100000); } udelay(100000); /* final stage - wait for connect */ for(;i > 1;) { /* if 'i' > 1 - wait for connection message from modem */ mdm_readline(console_buffer, CONFIG_SYS_CBSIZE); dbg("ini_f: [%s]", console_buffer); if (strncmp(console_buffer, "CONNECT", 7) == 0) { dbg("ini_f: connected"); return 0; } } return 0; } #endif #if 0 /* We could use plain global data, but the resulting code is bigger */ /* * Pointer to initial global data area * * Here we initialize it. */ #undef XTRN_DECLARE_GLOBAL_DATA_PTR #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); #endif /* 0 */ /************************************************************************/