/* * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef _POST_H #define _POST_H #ifndef __ASSEMBLY__ #include <common.h> #endif #ifdef CONFIG_POST #define POST_POWERON 0x01 /* test runs on power-on booting */ #define POST_NORMAL 0x02 /* test runs on normal booting */ #define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */ #define POST_POWERTEST 0x08 /* test runs after watchdog reset */ #define POST_COLDBOOT 0x80 /* first boot after power-on */ #define POST_ROM 0x0100 /* test runs in ROM */ #define POST_RAM 0x0200 /* test runs in RAM */ #define POST_MANUAL 0x0400 /* test runs on diag command */ #define POST_REBOOT 0x0800 /* test may cause rebooting */ #define POST_PREREL 0x1000 /* test runs before relocation */ #define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */ #define POST_STOP 0x4000 /* Interrupt POST sequence on fail */ #define POST_MEM (POST_RAM | POST_ROM) #define POST_ALWAYS (POST_NORMAL | \ POST_SLOWTEST | \ POST_MANUAL | \ POST_POWERON ) #define POST_FAIL_SAVE 0x80 #ifndef __ASSEMBLY__ struct post_test { char *name; char *cmd; char *desc; int flags; int (*test) (int flags); int (*init_f) (void); void (*reloc) (void); unsigned long testid; }; int post_init_f (void); void post_bootmode_init (void); int post_bootmode_get (unsigned int * last_test); void post_bootmode_clear (void); void post_output_backlog ( void ); int post_run (char *name, int flags); int post_info (char *name); int post_log (char *format, ...); void post_reloc (void); unsigned long post_time_ms (unsigned long base); extern struct post_test post_list[]; extern unsigned int post_list_size; extern int post_hotkeys_pressed(void); #endif /* __ASSEMBLY__ */ #define CFG_POST_RTC 0x00000001 #define CFG_POST_WATCHDOG 0x00000002 #define CFG_POST_MEMORY 0x00000004 #define CFG_POST_CPU 0x00000008 #define CFG_POST_I2C 0x00000010 #define CFG_POST_CACHE 0x00000020 #define CFG_POST_UART 0x00000040 #define CFG_POST_ETHER 0x00000080 #define CFG_POST_SPI 0x00000100 #define CFG_POST_USB 0x00000200 #define CFG_POST_SPR 0x00000400 #define CFG_POST_SYSMON 0x00000800 #define CFG_POST_DSP 0x00001000 #define CFG_POST_OCM 0x00002000 #define CFG_POST_FPU 0x00004000 #define CFG_POST_ECC 0x00008000 #define CFG_POST_BSPEC1 0x00010000 #define CFG_POST_BSPEC2 0x00020000 #define CFG_POST_BSPEC3 0x00040000 #define CFG_POST_BSPEC4 0x00080000 #define CFG_POST_BSPEC5 0x00100000 #define CFG_POST_CODEC 0x00200000 #endif /* CONFIG_POST */ #endif /* _POST_H */