/* * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000. * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __MPC824X_H__ #define __MPC824X_H__ #include <config.h> /* CPU Types */ #define CPU_TYPE_601 0x01 /* PPC 601 CPU */ #define CPU_TYPE_602 0x02 /* PPC 602 CPU */ #define CPU_TYPE_603 0x03 /* PPC 603 CPU */ #define CPU_TYPE_603E 0x06 /* PPC 603e CPU */ #define CPU_TYPE_603P 0x07 /* PPC 603p CPU */ #define CPU_TYPE_604 0x04 /* PPC 604 CPU */ #define CPU_TYPE_604E 0x09 /* PPC 604e CPU */ #define CPU_TYPE_604R 0x0a /* PPC 604r CPU */ #define CPU_TYPE_750 0x08 /* PPC 750 CPU */ #define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */ #define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */ #define _CACHE_ALIGN_SIZE 32 /* cache line size */ /* spr976 - DMISS data tlb miss address register * spr977 - DCMP data tlb miss compare register * spr978 - HASH1 PTEG1 address register * spr980 - HASH2 PTEG2 address register * IMISS - instruction tlb miss address register * ICMP - instruction TLB mis compare register * RPA - real page address register * HID0 - hardware implemntation register * HID2 - instruction address breakpoint register */ /* Kahlua/MPC8240 defines */ #define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */ #define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */ #define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */ #define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */ #define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */ #define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */ #define CHRP_ISA_MEM_PHYS 0xfd000000 #define CHRP_ISA_MEM_BUS 0x00000000 #define CHRP_ISA_MEM_SIZE 0x01000000 #define CHRP_ISA_IO_PHYS 0xfe000000 #define CHRP_ISA_IO_BUS 0x00000000 #define CHRP_ISA_IO_SIZE 0x00800000 #define CHRP_PCI_IO_PHYS 0xfe800000 #define CHRP_PCI_IO_BUS 0x00800000 #define CHRP_PCI_IO_SIZE 0x00400000 #define CHRP_PCI_MEM_PHYS 0x80000000 #define CHRP_PCI_MEM_BUS 0x80000000 #define CHRP_PCI_MEM_SIZE 0x7d000000 #define CHRP_PCI_MEMORY_PHYS 0x00000000 #define CHRP_PCI_MEMORY_BUS 0x00000000 #define CHRP_PCI_MEMORY_SIZE 0x40000000 #define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */ #define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */ #define PREP_ISA_IO_PHYS 0x80000000 #define PREP_ISA_IO_BUS 0x00000000 #define PREP_ISA_IO_SIZE 0x00800000 #define PREP_PCI_IO_PHYS 0x81000000 #define PREP_PCI_IO_BUS 0x01000000 #define PREP_PCI_IO_SIZE 0x3e800000 #define PREP_PCI_MEM_PHYS 0xc0000000 #define PREP_PCI_MEM_BUS 0x00000000 #define PREP_PCI_MEM_SIZE 0x3f000000 #define PREP_PCI_MEMORY_PHYS 0x00000000 #define PREP_PCI_MEMORY_BUS 0x80000000 #define PREP_PCI_MEMORY_SIZE 0x80000000 #define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */ #define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */ #define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */ #define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */ #define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */ #define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */ #define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */ #define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */ #define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */ #define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */ #define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */ #define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/ #define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/ #define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */ #define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */ #define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */ #define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/ #define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */ #define MEM_EN_ADR 0x800000a0 /* Memory bank enable */ #define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */ /*----------------------------------------------------------------------- * Exception offsets (PowerPC standard) */ #define EXC_OFF_RESERVED0 0x0000 /* Reserved */ #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ #define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */ #define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */ #define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */ #define EXC_OFF_EXTERNAL 0x0500 /* External */ #define EXC_OFF_ALIGN 0x0600 /* Alignment */ #define EXC_OFF_PROGRAM 0x0700 /* Program */ #define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */ #define EXC_OFF_DECR 0x0900 /* Decrementer */ #define EXC_OFF_RESERVED1 0x0A00 /* Reserved */ #define EXC_OFF_RESERVED2 0x0B00 /* Reserved */ #define EXC_OFF_SYS_CALL 0x0C00 /* System Call */ #define EXC_OFF_TRACE 0x0D00 /* Trace */ #define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */ /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */ /* these found in DINK code - may not apply to 8240*/ #define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */ #define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */ /* 0x1000 - 0x2FFF are implementation specific */ /* these found in DINK code - may not apply to 8240 */ #define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */ #define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */ #define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */ #define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */ #define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */ #define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/ #define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */ #define _START_OFFSET EXC_OFF_SYS_RESET #define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */ #define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */ #define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */ #define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */ #define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */ #define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */ #define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */ #define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */ #if defined(CFG_ADDR_MAP_A) #define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ #define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ #define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ #define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ #else /* Assume Map B, default */ #define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ #define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ #define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ #define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ #endif #define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW) #define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW) /* Macros to write to config registers. addr should be a constant in all cases */ #define CONFIG_WRITE_BYTE( addr, data ) \ __asm__ __volatile__( \ " stwbrx %1, 0, %0\n \ sync\n \ stb %3, %4(%2)\n \ sync " \ : /* no output */ \ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ "b" (CONFIG_DATA), "r" (data), \ "n" ((addr) & 3)); #define CONFIG_WRITE_HALFWORD( addr, data ) \ __asm__ __volatile__( \ " stwbrx %1, 0, %0\n \ sync\n \ sthbrx %3, %4, %2\n \ sync " \ : /* no output */ \ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ "r" (CONFIG_DATA), "r" (data), \ "b" ((addr) & 3)); /* this assumes it's writeing on word boundaries*/ #define CONFIG_WRITE_WORD( addr, data ) \ __asm__ __volatile__( \ " stwbrx %1, 0, %0\n \ sync\n \ stwbrx %3, 0, %2\n \ sync " \ : /* no output */ \ : "r" (CONFIG_ADDR), "r" (addr), \ "r" (CONFIG_DATA), "r" (data)); /* Configuration register reads*/ #define CONFIG_READ_BYTE( addr, reg ) \ __asm__ ( \ " stwbrx %1, 0, %2\n \ sync\n \ lbz %0, %4(%3)\n \ sync " \ : "=r" (reg) \ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ "b" (CONFIG_DATA), "n" ((addr) & 3)); #define CONFIG_READ_HALFWORD( addr, reg ) \ __asm__ ( \ " stwbrx %1, 0, %2\n \ sync\n \ lhbrx %0, %4, %3\n \ sync " \ : "=r" (reg) \ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ "r" (CONFIG_DATA), \ "b" ((addr) & 3)); /* this assumes it's reading on word boundaries*/ #define CONFIG_READ_WORD( addr, reg ) \ __asm__ ( \ " stwbrx %1, 0, %2\n \ sync\n \ lwbrx %0, 0, %3\n \ sync " \ : "=r" (reg) \ : "r" (addr), "r" (CONFIG_ADDR),\ "r" (CONFIG_DATA)); /* * configuration register 'addresses'. * These are described in chaper 5 of the 8240 users manual. * Where the register has an abreviation in the manual, this has * been usaed here, otherwise a name in keeping with the norm has * been invented. * Note that some of these registers aren't documented in the manual. */ #define PCICR 0x80000004 /* PCI Command Register */ #define PCISR 0x80000006 /* PCI Status Register */ #define REVID 0x80000008 /* CPU revision id */ #define PIR 0x80000009 /* PCI Programming Interface Register */ #define PBCCR 0x8000000b /* PCI Base Class Code Register */ #define PCLSR 0x8000000c /* Processor Cache Line Size Register */ #define PLTR 0x8000000d /* PCI Latancy Timer Register */ #define PHTR 0x8000000e /* PCI Header Type Register */ #define BISTCTRL 0x8000000f /* BIST Control */ #define LMBAR 0x80000010 /* Local Base Addres Register */ #define PCSRBAR 0x80000014 /* PCSR Base Address Register */ #define ILR 0x8000003c /* PCI Interrupt Line Register */ #define IPR 0x8000003d /* Interrupt Pin Register */ #define MINGNT 0x8000003e /* MIN GNI */ #define MAXLAT 0x8000003f /* MAX LAT */ #define PCIACR 0x80000046 /* PCI Arbiter Control Register */ #define PMCR1 0x80000070 /* Power management config. 1 */ #define PMCR2 0x80000072 /* Power management config. 2 */ #define ODCR 0x80000073 /* Output Driver Control Register */ #define CLKDCR 0x80000074 /* CLK Driver Control Register */ #if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) #define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ #define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ #endif #define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */ #define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */ #define EUMBSIZE 0x00100000 /* Size of EUMB region */ #define MSAR1 0x80000080 /* Memory Starting Address Register 1 */ #define MSAR2 0x80000084 /* Memory Starting Address Register 2 */ #define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/ #define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/ #define MEAR1 0x80000090 /* Memory Ending Address Register 1 */ #define MEAR2 0x80000094 /* Memory Ending Address Register 2 */ #define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */ #define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */ #define MBER 0x800000a0 /* Memory bank Enable Register*/ #define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */ #define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */ #define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */ #define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */ #define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */ #define ERRENR1 0x800000c0 /* Error Enableing Register 1 */ #define ERRENR2 0x800000c4 /* Error Enableing Register 2 */ #define ERRDR1 0x800000c1 /* Error Detection Register 1 */ #define IPBESR 0x800000c3 /* Internal Processor Error Status Register */ #define ERRDR2 0x800000c5 /* Error Detection Register 2 */ #define PBESR 0x800000c7 /* PCI Bus Error Status Register */ #define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */ #define AMBOR 0x800000e0 /* Address Map B Options Register */ #define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */ #define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */ #define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */ #define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */ #define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */ /* some values for some of the above */ #define PICR1_CF_APARK 0x00000008 #define PICR1_LE_MODE 0x00000020 #define PICR1_ST_GATH_EN 0x00000040 #if defined(CONFIG_MPC8240) #define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */ #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) #define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */ #define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */ #define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */ #define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */ #define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */ #define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */ #define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ #define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ #define MIOCR1_SHIFT 2 #define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ #define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ #define MIOCR2_SHIFT 3 #define ODCR_ADR_X 0x80000070 /* Output Driver Control register */ #define ODCR_SHIFT 3 #define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */ #define PMCR2_ADR_X 0x80000070 #define PMCR2_SHIFT 3 #define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */ #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif #define PICR1_CF_DPARK 0x00000200 #define PICR1_MCP_EN 0x00000800 #define PICR1_FLASH_WR_EN 0x00001000 #ifdef CONFIG_MPC8240 #define PICR1_ADDRESS_MAP 0x00010000 #define PIRC1_MSK 0xff000000 #endif #define PICR1_PROC_TYPE_MSK 0x00060000 #define PICR1_PROC_TYPE_603E 0x00040000 #define PICR1_RCS0 0x00100000 #define PICR2_CF_SNOOP_WS_MASK 0x000c0000 #define PICR2_CF_SNOOP_WS_0WS 0x00000000 #define PICR2_CF_SNOOP_WS_1WS 0x00040000 #define PICR2_CF_SNOOP_WS_2WS 0x00080000 #define PICR2_CF_SNOOP_WS_3WS 0x000c0000 #define PICR2_CF_APHASE_WS_MASK 0x0000000c #define PICR2_CF_APHASE_WS_0WS 0x00000000 #define PICR2_CF_APHASE_WS_1WS 0x00000004 #define PICR2_CF_APHASE_WS_2WS 0x00000008 #define PICR2_CF_APHASE_WS_3WS 0x0000000c #define MCCR1_ROMNAL_SHIFT 28 #define MCCR1_ROMNAL_MSK 0xf0000000 #define MCCR1_ROMFAL_SHIFT 23 #define MCCR1_ROMFAL_MSK 0x0f800000 #define MCCR1_DBUS_SIZE0 0x00400000 #define MCCR1_BURST 0x00100000 #define MCCR1_MEMGO 0x00080000 #define MCCR1_SREN 0x00040000 #if defined(CONFIG_MPC8240) #define MCCR1_RAM_TYPE 0x00020000 #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) #define MCCR1_SDRAM_EN 0x00020000 #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif #define MCCR1_PCKEN 0x00010000 #define MCCR1_BANK1ROW_SHIFT 2 #define MCCR1_BANK2ROW_SHIFT 4 #define MCCR1_BANK3ROW_SHIFT 6 #define MCCR1_BANK4ROW_SHIFT 8 #define MCCR1_BANK5ROW_SHIFT 10 #define MCCR1_BANK6ROW_SHIFT 12 #define MCCR1_BANK7ROW_SHIFT 14 #define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000 #define MCCR2_TS_WAIT_TIMER_SHIFT 29 #define MCCR2_ASRISE_MSK 0x1e000000 #define MCCR2_ASRISE_SHIFT 25 #define MCCR2_ASFALL_MSK 0x01e00000 #define MCCR2_ASFALL_SHIFT 21 #define MCCR2_INLINE_PAR_NOT_ECC 0x00100000 #define MCCR2_WRITE_PARITY_CHK 0x00080000 #define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000 #ifdef CONFIG_MPC8240 #define MCCR2_ECC_EN 0x00020000 #define MCCR2_EDO 0x00010000 #endif #define MCCR2_REFINT_MSK 0x0000fffc #define MCCR2_REFINT_SHIFT 2 #define MCCR2_RSV_PG 0x00000002 #define MCCR2_PMW_PAR 0x00000001 #define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/ #define MCCR3_BSTOPRE2TO5_SHIFT 28 #define MCCR3_REFREC_MSK 0x0f000000 #define MCCR3_REFREC_SHIFT 24 #ifdef CONFIG_MPC8240 #define MCCR3_RDLAT_MSK 0x00f00000 #define MCCR3_RDLAT_SHIFT 20 #define MCCR3_CPX 0x00010000 #define MCCR3_RAS6P_MSK 0x00078000 #define MCCR3_RAS6P_SHIFT 15 #define MCCR3_CAS5_MSK 0x00007000 #define MCCR3_CAS5_SHIFT 12 #define MCCR3_CP4_MSK 0x00000e00 #define MCCR3_CP4_SHIFT 9 #define MCCR3_CAS3_MSK 0x000001c0 #define MCCR3_CAS3_SHIFT 6 #define MCCR3_RCD2_MSK 0x00000038 #define MCCR3_RCD2_SHIFT 3 #define MCCR3_RP1_MSK 0x00000007 #define MCCR3_RP1_SHIFT 0 #endif #define MCCR4_PRETOACT_MSK 0xf0000000 #define MCCR4_PRETOACT_SHIFT 28 #define MCCR4_ACTTOPRE_MSK 0x0f000000 #define MCCR4_ACTTOPRE_SHIFT 24 #define MCCR4_WMODE 0x00800000 #define MCCR4_INLINE 0x00400000 #if defined(CONFIG_MPC8240) #define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/ #elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) #define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */ #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif #define MCCR4_REGISTERED 0x00100000 #define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/ #define MCCR4_BSTOPRE0TO1_SHIFT 18 #define MCCR4_REGDIMM 0x00008000 #define MCCR4_SDMODE_MSK 0x00007f00 #define MCCR4_SDMODE_SHIFT 8 #define MCCR4_ACTTORW_MSK 0x000000f0 #define MCCR4_ACTTORW_SHIFT 4 #define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/ #define MCCR4_BSTOPRE6TO9_SHIFT 0 #define MCCR4_DBUS_SIZE2_SHIFT 17 #define MICR_ADDR_MASK 0x0ff00000 #define MICR_ADDR_SHIFT 20 #define MICR_EADDR_MASK 0x30000000 #define MICR_EADDR_SHIFT 28 #define BATU_BEPI_MSK 0xfffe0000 #define BATU_BL_MSK 0x00001ffc #define BATU_BL_128K 0x00000000 #define BATU_BL_256K 0x00000004 #define BATU_BL_512K 0x0000000c #define BATU_BL_1M 0x0000001c #define BATU_BL_2M 0x0000003c #define BATU_BL_4M 0x0000007c #define BATU_BL_8M 0x000000fc #define BATU_BL_16M 0x000001fc #define BATU_BL_32M 0x000003fc #define BATU_BL_64M 0x000007fc #define BATU_BL_128M 0x00000ffc #define BATU_BL_256M 0x00001ffc #define BATU_VS 0x00000002 #define BATU_VP 0x00000001 #define BATL_BRPN_MSK 0xfffe0000 #define BATL_WIMG_MSK 0x00000078 #define BATL_WRITETHROUGH 0x00000040 #define BATL_CACHEINHIBIT 0x00000020 #define BATL_MEMCOHERENCE 0x00000010 #define BATL_GUARDEDSTORAGE 0x00000008 #define BATL_PP_MSK 0x00000003 #define BATL_PP_00 0x00000000 /* No access */ #define BATL_PP_01 0x00000001 /* Read-only */ #define BATL_PP_10 0x00000002 /* Read-write */ #define BATL_PP_11 0x00000003 /* * I'd attempt to do defines for the PP bits, but it's use is a bit * too complex, see the PowerPC Operating Environment Architecture * section in the PowerPc arch book, chapter 4. */ /*eumb and epic config*/ #define EPIC_FPR 0x00041000 #define EPIC_GCR 0x00041020 #define EPIC_EICR 0x00041030 #define EPIC_EVI 0x00041080 #define EPIC_PI 0x00041090 #define EPIC_SVR 0x000410E0 #define EPIC_TFRR 0x000410F0 /* * Note the information for these is rather mangled in the 8240 manual. * These are guesses. */ #define EPIC_GTCCR0 0x00041100 #define EPIC_GTCCR1 0x00041140 #define EPIC_GTCCR2 0x00041180 #define EPIC_GTCCR3 0x000411C0 #define EPIC_GTBCR0 0x00041110 #define EPIC_GTBCR1 0x00041150 #define EPIC_GTBCR2 0x00041190 #define EPIC_GTBCR3 0x000411D0 #define EPIC_GTVPR0 0x00041120 #define EPIC_GTVPR1 0x00041160 #define EPIC_GTVPR2 0x000411a0 #define EPIC_GTVPR3 0x000411e0 #define EPIC_GTDR0 0x00041130 #define EPIC_GTDR1 0x00041170 #define EPIC_GTDR2 0x000411b0 #define EPIC_GTDR3 0x000411f0 #define EPIC_IVPR0 0x00050200 #define EPIC_IVPR1 0x00050220 #define EPIC_IVPR2 0x00050240 #define EPIC_IVPR3 0x00050260 #define EPIC_IVPR4 0x00050280 #define EPIC_SVPR0 0x00050200 #define EPIC_SVPR1 0x00050220 #define EPIC_SVPR2 0x00050240 #define EPIC_SVPR3 0x00050260 #define EPIC_SVPR4 0x00050280 #define EPIC_SVPR5 0x000502A0 #define EPIC_SVPR6 0x000502C0 #define EPIC_SVPR7 0x000502E0 #define EPIC_SVPR8 0x00050300 #define EPIC_SVPR9 0x00050320 #define EPIC_SVPRa 0x00050340 #define EPIC_SVPRb 0x00050360 #define EPIC_SVPRc 0x00050380 #define EPIC_SVPRd 0x000503A0 #define EPIC_SVPRe 0x000503C0 #define EPIC_SVPRf 0x000503E0 /* MPC8240 Byte Swap/PCI Support Macros */ #define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) ) #define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) ) #define PCISWAP(x) LONGSWAP(x) #ifndef __ASSEMBLY__ /* * MPC107 Support * */ unsigned int mpc824x_mpc107_getreg(unsigned int regNum); void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal); void mpc824x_mpc107_write8(unsigned int address, unsigned char data); void mpc824x_mpc107_write16(unsigned int address, unsigned short data); void mpc824x_mpc107_write32(unsigned int address, unsigned int data); unsigned char mpc824x_mpc107_read8(unsigned int address); unsigned short mpc824x_mpc107_read16(unsigned int address); unsigned int mpc824x_mpc107_read32(unsigned int address); unsigned int mpc824x_eummbar_read(unsigned int regNum); void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal); #ifdef CONFIG_PCI struct pci_controller; void pci_cpm824x_init(struct pci_controller* hose); #endif #endif /* __ASSEMBLY__ */ #endif /* __MPC824X_H__ */