/* * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * (C) Copyright 2007 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * Derived from the MPC83xx header. */ #ifndef __MPC512X_H__ #define __MPC512X_H__ #include <config.h> #if defined(CONFIG_E300) #include <asm/e300.h> #endif /* System reset offset (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 #define _START_OFFSET EXC_OFF_SYS_RESET /* IMMRBAR - Internal Memory Register Base Address */ #define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ #define IMMRBAR 0x0000 /* Register offset to immr */ #define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ #define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) /* LAWBAR - Local Access Window Base Address Register */ #define LPBAW 0x0020 /* Register offset to immr */ #define LPCS0AW 0x0024 #define LPCS1AW 0x0028 #define LPCS2AW 0x002C #define LPCS3AW 0x0030 #define LPCS4AW 0x0034 #define LPCS5AW 0x0038 #define LPCS6AW 0x003C #define LPCA7AW 0x0040 #define SRAMBAR 0x00C4 #define LPC_OFFSET 0x10000 #define CS0_CONFIG 0x00000 #define CS1_CONFIG 0x00004 #define CS2_CONFIG 0x00008 #define CS3_CONFIG 0x0000C #define CS4_CONFIG 0x00010 #define CS5_CONFIG 0x00014 #define CS6_CONFIG 0x00018 #define CS7_CONFIG 0x0001C #define CS_CTRL 0x00020 #define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ #define CS_CTRL_IE 0x08000000 /* CS Interrupt Enable bit */ /* SPRIDR - System Part and Revision ID Register */ #define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ #define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ #define SPR_5121E 0x80180000 /* SPCR - System Priority Configuration Register */ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ #define SPCR_PCIHPE_SHIFT (31-3) #define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */ #define SPCR_PCIPR_SHIFT (31-7) #define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */ #define SPCR_TBEN_SHIFT (31-9) #define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */ #define SPCR_COREPR_SHIFT (31-11) /* SWCRR - System Watchdog Control Register */ #define SWCRR 0x0904 /* Register offset to immr */ #define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */ #define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */ #define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */ #define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */ #define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) /* SWCNR - System Watchdog Counter Register */ #define SWCNR 0x0908 /* Register offset to immr */ #define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */ #define SWCNR_RES ~(SWCNR_SWCN) /* SWSRR - System Watchdog Service Register */ #define SWSRR 0x090E /* Register offset to immr */ /* ACR - Arbiter Configuration Register */ #define ACR_COREDIS 0x10000000 /* Core disable */ #define ACR_COREDIS_SHIFT (31-7) #define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */ #define ACR_PIPE_DEP_SHIFT (31-15) #define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */ #define ACR_PCI_RPTCNT_SHIFT (31-19) #define ACR_RPTCNT 0x00000700 /* Repeat count */ #define ACR_RPTCNT_SHIFT (31-23) #define ACR_APARK 0x00000030 /* Address parking */ #define ACR_APARK_SHIFT (31-27) #define ACR_PARKM 0x0000000F /* Parking master */ #define ACR_PARKM_SHIFT (31-31) /* ATR - Arbiter Timers Register */ #define ATR_DTO 0x00FF0000 /* Data time out */ #define ATR_ATO 0x000000FF /* Address time out */ /* AER - Arbiter Event Register */ #define AER_ETEA 0x00000020 /* Transfer error */ #define AER_RES 0x00000010 /* Reserved transfer type */ #define AER_ECW 0x00000008 /* External control word transfer type */ #define AER_AO 0x00000004 /* Address Only transfer type */ #define AER_DTO 0x00000002 /* Data time out */ #define AER_ATO 0x00000001 /* Address time out */ /* AEATR - Arbiter Event Address Register */ #define AEATR_EVENT 0x07000000 /* Event type */ #define AEATR_MSTR_ID 0x001F0000 /* Master Id */ #define AEATR_TBST 0x00000800 /* Transfer burst */ #define AEATR_TSIZE 0x00000700 /* Transfer Size */ #define AEATR_TTYPE 0x0000001F /* Transfer Type */ /* RSR - Reset Status Register */ #define RSR_SWSR 0x00002000 /* software soft reset */ #define RSR_SWSR_SHIFT 13 #define RSR_SWHR 0x00001000 /* software hard reset */ #define RSR_SWHR_SHIFT 12 #define RSR_JHRS 0x00000200 /* jtag hreset */ #define RSR_JHRS_SHIFT 9 #define RSR_JSRS 0x00000100 /* jtag sreset status */ #define RSR_JSRS_SHIFT 8 #define RSR_CSHR 0x00000010 /* checkstop reset status */ #define RSR_CSHR_SHIFT 4 #define RSR_SWRS 0x00000008 /* software watchdog reset status */ #define RSR_SWRS_SHIFT 3 #define RSR_BMRS 0x00000004 /* bus monitop reset status */ #define RSR_BMRS_SHIFT 2 #define RSR_SRS 0x00000002 /* soft reset status */ #define RSR_SRS_SHIFT 1 #define RSR_HRS 0x00000001 /* hard reset status */ #define RSR_HRS_SHIFT 0 #define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ RSR_BMRS | RSR_SRS | RSR_HRS) /* RMR - Reset Mode Register */ #define RMR_CSRE 0x00000001 /* checkstop reset enable */ #define RMR_CSRE_SHIFT 0 #define RMR_RES ~(RMR_CSRE) /* RCR - Reset Control Register */ #define RCR_SWHR 0x00000002 /* software hard reset */ #define RCR_SWSR 0x00000001 /* software soft reset */ #define RCR_RES ~(RCR_SWHR | RCR_SWSR) /* RCER - Reset Control Enable Register */ #define RCER_CRE 0x00000001 /* software hard reset */ #define RCER_RES ~(RCER_CRE) /* SPMR - System PLL Mode Register */ #define SPMR_SPMF 0x0F000000 #define SPMR_SPMF_SHIFT 24 #define SPMR_CPMF 0x000F0000 #define SPMR_CPMF_SHIFT 16 /* SCFR1 System Clock Frequency Register 1 */ #define SCFR1_IPS_DIV 0x2 #define SCFR1_IPS_DIV_MASK 0x03800000 #define SCFR1_IPS_DIV_SHIFT 23 /* SCFR2 System Clock Frequency Register 2 */ #define SCFR2_SYS_DIV 0xFC000000 #define SCFR2_SYS_DIV_SHIFT 26 /* SCCR - System Clock Control Registers */ /* System Clock Control Register 1 commands */ #define CLOCK_SCCR1_CFG_EN 0x80000000 #define CLOCK_SCCR1_LPC_EN 0x40000000 #define CLOCK_SCCR1_NFC_EN 0x20000000 #define CLOCK_SCCR1_PATA_EN 0x10000000 #define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) #define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 #define CLOCK_SCCR1_SATA_EN 0x00004000 #define CLOCK_SCCR1_FEC_EN 0x00002000 #define CLOCK_SCCR1_TPR_EN 0x00001000 #define CLOCK_SCCR1_PCI_EN 0x00000800 #define CLOCK_SCCR1_DDR_EN 0x00000400 /* System Clock Control Register 2 commands */ #define CLOCK_SCCR2_DIU_EN 0x80000000 #define CLOCK_SCCR2_AXE_EN 0x40000000 #define CLOCK_SCCR2_MEM_EN 0x20000000 #define CLOCK_SCCR2_USB2_EN 0x10000000 #define CLOCK_SCCR2_USB1_EN 0x08000000 #define CLOCK_SCCR2_I2C_EN 0x04000000 #define CLOCK_SCCR2_BDLC_EN 0x02000000 #define CLOCK_SCCR2_SDHC_EN 0x01000000 #define CLOCK_SCCR2_SPDIF_EN 0x00800000 #define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 #define CLOCK_SCCR2_MBX_EN 0x00200000 #define CLOCK_SCCR2_MBX_3D_EN 0x00100000 #define CLOCK_SCCR2_IIM_EN 0x00080000 /* PSC FIFO Command values */ #define PSC_FIFO_RESET_SLICE 0x80 #define PSC_FIFO_ENABLE_SLICE 0x01 /* PSC FIFO Controller Command values */ #define FIFOC_ENABLE_CLOCK_GATE 0x01 #define FIFOC_DISABLE_CLOCK_GATE 0x00 /* PSC FIFO status */ #define PSC_FIFO_EMPTY 0x01 /* PSC Command values */ #define PSC_RX_ENABLE 0x01 #define PSC_RX_DISABLE 0x02 #define PSC_TX_ENABLE 0x04 #define PSC_TX_DISABLE 0x08 #define PSC_SEL_MODE_REG_1 0x10 #define PSC_RST_RX 0x20 #define PSC_RST_TX 0x30 #define PSC_RST_ERR_STAT 0x40 #define PSC_RST_BRK_CHG_INT 0x50 #define PSC_START_BRK 0x60 #define PSC_STOP_BRK 0x70 /* PSC status register bits */ #define PSC_SR_CDE 0x0080 #define PSC_SR_TXEMP 0x0800 #define PSC_SR_OE 0x1000 #define PSC_SR_PE 0x2000 #define PSC_SR_FE 0x4000 #define PSC_SR_RB 0x8000 /* PSC mode fields */ #define PSC_MODE_5_BITS 0x00 #define PSC_MODE_6_BITS 0x01 #define PSC_MODE_7_BITS 0x02 #define PSC_MODE_8_BITS 0x03 #define PSC_MODE_PAREVEN 0x00 #define PSC_MODE_PARODD 0x04 #define PSC_MODE_PARFORCE 0x08 #define PSC_MODE_PARNONE 0x10 #define PSC_MODE_ENTIMEOUT 0x20 #define PSC_MODE_RXRTS 0x80 #define PSC_MODE_1_STOPBIT 0x07 /* * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs * * NOTE: individual PSC units are free to use whatever area (and size) of the * FIFOC internal memory, so make sure memory areas for FIFO slices used by * different PSCs do not overlap! * * Overall size of FIFOC memory is not documented in the MPC5121e RM, but * tests indicate that it is 1024 words total. */ #define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */ #define FIFOC_PSC0_TX_ADDR 0x0 #define FIFOC_PSC0_RX_SIZE 0x0 #define FIFOC_PSC0_RX_ADDR 0x0 #define FIFOC_PSC1_TX_SIZE 0x0 #define FIFOC_PSC1_TX_ADDR 0x0 #define FIFOC_PSC1_RX_SIZE 0x0 #define FIFOC_PSC1_RX_ADDR 0x0 #define FIFOC_PSC2_TX_SIZE 0x0 #define FIFOC_PSC2_TX_ADDR 0x0 #define FIFOC_PSC2_RX_SIZE 0x0 #define FIFOC_PSC2_RX_ADDR 0x0 #define FIFOC_PSC3_TX_SIZE 0x04 #define FIFOC_PSC3_TX_ADDR 0x0 #define FIFOC_PSC3_RX_SIZE 0x04 #define FIFOC_PSC3_RX_ADDR 0x10 #define FIFOC_PSC4_TX_SIZE 0x0 #define FIFOC_PSC4_TX_ADDR 0x0 #define FIFOC_PSC4_RX_SIZE 0x0 #define FIFOC_PSC4_RX_ADDR 0x0 #define FIFOC_PSC5_TX_SIZE 0x0 #define FIFOC_PSC5_TX_ADDR 0x0 #define FIFOC_PSC5_RX_SIZE 0x0 #define FIFOC_PSC5_RX_ADDR 0x0 #define FIFOC_PSC6_TX_SIZE 0x0 #define FIFOC_PSC6_TX_ADDR 0x0 #define FIFOC_PSC6_RX_SIZE 0x0 #define FIFOC_PSC6_RX_ADDR 0x0 #define FIFOC_PSC7_TX_SIZE 0x0 #define FIFOC_PSC7_TX_ADDR 0x0 #define FIFOC_PSC7_RX_SIZE 0x0 #define FIFOC_PSC7_RX_ADDR 0x0 #define FIFOC_PSC8_TX_SIZE 0x0 #define FIFOC_PSC8_TX_ADDR 0x0 #define FIFOC_PSC8_RX_SIZE 0x0 #define FIFOC_PSC8_RX_ADDR 0x0 #define FIFOC_PSC9_TX_SIZE 0x0 #define FIFOC_PSC9_TX_ADDR 0x0 #define FIFOC_PSC9_RX_SIZE 0x0 #define FIFOC_PSC9_RX_ADDR 0x0 #define FIFOC_PSC10_TX_SIZE 0x0 #define FIFOC_PSC10_TX_ADDR 0x0 #define FIFOC_PSC10_RX_SIZE 0x0 #define FIFOC_PSC10_RX_ADDR 0x0 #define FIFOC_PSC11_TX_SIZE 0x0 #define FIFOC_PSC11_TX_ADDR 0x0 #define FIFOC_PSC11_RX_SIZE 0x0 #define FIFOC_PSC11_RX_ADDR 0x0 /* IO Control Register */ /* Indexes in regs array */ #define MEM_IDX 0x00 #define PATA_CE1_IDX 0x2e #define PATA_CE2_IDX 0x2f #define PATA_ISOLATE_IDX 0x30 #define PATA_IOR_IDX 0x31 #define PATA_IOW_IDX 0x32 #define PATA_IOCHRDY_IDX 0x33 #define PATA_INTRQ_IDX 0x34 #define PATA_DRQ_IDX 0x35 #define PATA_DACK_IDX 0x36 #define SPDIF_TXCLOCK_IDX 0x73 #define SPDIF_TX_IDX 0x74 #define SPDIF_RX_IDX 0x75 #define PSC0_0_IDX 0x83 #define PSC0_1_IDX 0x84 #define PSC0_2_IDX 0x85 #define PSC0_3_IDX 0x86 #define PSC0_4_IDX 0x87 #define PSC1_0_IDX 0x88 #define PSC1_1_IDX 0x89 #define PSC1_2_IDX 0x8a #define PSC1_3_IDX 0x8b #define PSC1_4_IDX 0x8c #define PSC2_0_IDX 0x8d #define PSC2_1_IDX 0x8e #define PSC2_2_IDX 0x8f #define PSC2_3_IDX 0x90 #define PSC2_4_IDX 0x91 #define IOCTRL_FUNCMUX_SHIFT 7 #define IOCTRL_FUNCMUX_FEC 1 #define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT) /* Set for DDR */ #define IOCTRL_MUX_DDR 0x00000036 /* Register Offset Base */ #define MPC512X_FEC (CFG_IMMR + 0x02800) /* Number of I2C buses */ #define I2C_BUS_CNT 3 /* I2Cn control register bits */ #define I2C_EN 0x80 #define I2C_IEN 0x40 #define I2C_STA 0x20 #define I2C_TX 0x10 #define I2C_TXAK 0x08 #define I2C_RSTA 0x04 #define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) /* I2Cn status register bits */ #define I2C_CF 0x80 #define I2C_AAS 0x40 #define I2C_BB 0x20 #define I2C_AL 0x10 #define I2C_SRW 0x04 #define I2C_IF 0x02 #define I2C_RXAK 0x01 #endif /* __MPC512X_H__ */