/* * Copyright 2008,2010 Freescale Semiconductor, Inc * Andy Fleming * * Based (loosely) on the Linux code * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef _MMC_H_ #define _MMC_H_ #include #define SD_VERSION_SD 0x20000 #define SD_VERSION_2 (SD_VERSION_SD | 0x20) #define SD_VERSION_1_0 (SD_VERSION_SD | 0x10) #define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a) #define MMC_VERSION_MMC 0x10000 #define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) #define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x12) #define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x14) #define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x22) #define MMC_VERSION_3 (MMC_VERSION_MMC | 0x30) #define MMC_VERSION_4 (MMC_VERSION_MMC | 0x40) #define MMC_MODE_HS 0x001 #define MMC_MODE_HS_52MHz 0x010 #define MMC_MODE_4BIT 0x100 #define MMC_MODE_8BIT 0x200 #define MMC_MODE_SPI 0x400 #define SD_DATA_4BIT 0x00040000 #define IS_SD(x) (x->version & SD_VERSION_SD) #define MMC_DATA_READ 1 #define MMC_DATA_WRITE 2 #define NO_CARD_ERR -16 /* No SD/MMC card inserted */ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 #define MMC_CMD_ALL_SEND_CID 2 #define MMC_CMD_SET_RELATIVE_ADDR 3 #define MMC_CMD_SET_DSR 4 #define MMC_CMD_SWITCH 6 #define MMC_CMD_SELECT_CARD 7 #define MMC_CMD_SEND_EXT_CSD 8 #define MMC_CMD_SEND_CSD 9 #define MMC_CMD_SEND_CID 10 #define MMC_CMD_STOP_TRANSMISSION 12 #define MMC_CMD_SEND_STATUS 13 #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_SINGLE_BLOCK 17 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 #define MMC_CMD_APP_CMD 55 #define MMC_CMD_SPI_READ_OCR 58 #define MMC_CMD_SPI_CRC_ON_OFF 59 #define SD_CMD_SEND_RELATIVE_ADDR 3 #define SD_CMD_SWITCH_FUNC 6 #define SD_CMD_SEND_IF_COND 8 #define SD_CMD_APP_SET_BUS_WIDTH 6 #define SD_CMD_APP_SEND_OP_COND 41 #define SD_CMD_APP_SEND_SCR 51 /* SCR definitions in different words */ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 #define MMC_HS_TIMING 0x00000100 #define MMC_HS_52MHZ 0x2 #define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte addressed by index which are 1 in value field */ #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte addressed by index, which are 1 in value field */ #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ #define SD_SWITCH_CHECK 0 #define SD_SWITCH_SWITCH 1 /* * EXT_CSD fields */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ /* * EXT_CSD field definitions */ #define EXT_CSD_CMD_SET_NORMAL (1<<0) #define EXT_CSD_CMD_SET_SECURE (1<<1) #define EXT_CSD_CMD_SET_CPSECURE (1<<2) #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) #define MMC_RSP_PRESENT (1 << 0) #define MMC_RSP_136 (1 << 1) /* 136 bit response */ #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ #define MMC_RSP_NONE (0) #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ MMC_RSP_BUSY) #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) #define MMC_RSP_R4 (MMC_RSP_PRESENT) #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) struct mmc_cid { unsigned long psn; unsigned short oid; unsigned char mid; unsigned char prv; unsigned char mdt; char pnm[7]; }; /* * WARNING! * * This structure is used by atmel_mci.c only. * It works for the AVR32 architecture but NOT * for ARM/AT91 architectures. * Its use is highly depreciated. * After the atmel_mci.c driver for AVR32 has * been replaced this structure will be removed. */ struct mmc_csd { u8 csd_structure:2, spec_vers:4, rsvd1:2; u8 taac; u8 nsac; u8 tran_speed; u16 ccc:12, read_bl_len:4; u64 read_bl_partial:1, write_blk_misalign:1, read_blk_misalign:1, dsr_imp:1, rsvd2:2, c_size:12, vdd_r_curr_min:3, vdd_r_curr_max:3, vdd_w_curr_min:3, vdd_w_curr_max:3, c_size_mult:3, sector_size:5, erase_grp_size:5, wp_grp_size:5, wp_grp_enable:1, default_ecc:2, r2w_factor:3, write_bl_len:4, write_bl_partial:1, rsvd3:5; u8 file_format_grp:1, copy:1, perm_write_protect:1, tmp_write_protect:1, file_format:2, ecc:2; u8 crc:7; u8 one:1; }; struct mmc_cmd { ushort cmdidx; uint resp_type; uint cmdarg; uint response[4]; uint flags; }; struct mmc_data { union { char *dest; const char *src; /* src buffers don't get written to */ }; uint flags; uint blocks; uint blocksize; }; struct mmc { struct list_head link; char name[32]; void *priv; uint voltages; uint version; uint f_min; uint f_max; int high_capacity; uint bus_width; uint clock; uint card_caps; uint host_caps; uint ocr; uint scr[2]; uint csd[4]; uint cid[4]; ushort rca; uint tran_speed; uint read_bl_len; uint write_bl_len; u64 capacity; block_dev_desc_t block_dev; int (*send_cmd)(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data); void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); #ifdef CONFIG_MMC_MBLOCK uint b_max; #endif }; int mmc_register(struct mmc *mmc); int mmc_initialize(bd_t *bis); int mmc_init(struct mmc *mmc); int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); void mmc_set_clock(struct mmc *mmc, uint clock); struct mmc *find_mmc_device(int dev_num); int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); int board_mmc_getcd(u8 *cd, struct mmc *mmc); #ifdef CONFIG_GENERIC_MMC int atmel_mci_init(void *regs); #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); #else int mmc_legacy_init(int verbose); #endif #endif /* _MMC_H_ */