/* * (C) Copyright 2007-2008 Michal Simek * * Michal SIMEK * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include "../board/xilinx/xupv2p/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ #define CONFIG_XUPV2P 1 /* uart */ #ifdef XILINX_UARTLITE_BASEADDR #define CONFIG_XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #else #ifdef XILINX_UART16550_BASEADDR #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 4 #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_COM1 XILINX_UART16550_BASEADDR #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } #endif #endif /* * setting reset address * * TEXT_BASE is set to place, where the U-BOOT run in RAM, but * if you want to store U-BOOT in flash, set CONFIG_SYS_RESET_ADDRESS * to FLASH memory and after loading bitstream jump to FLASH. * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze * jump to CONFIG_SYS_RESET_ADDRESS where is the original U-BOOT code. */ /* #define CONFIG_SYS_RESET_ADDRESS 0x36000000 */ /* ethernet */ #ifdef XILINX_EMAC_BASEADDR #define CONFIG_XILINX_EMAC 1 #define CONFIG_SYS_ENET #else #ifdef XILINX_EMACLITE_BASEADDR #define CONFIG_XILINX_EMACLITE 1 #define CONFIG_SYS_ENET #endif #endif #undef ET_DEBUG /* gpio */ #ifdef XILINX_GPIO_BASEADDR #define CONFIG_SYS_GPIO_0 1 #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR #define CONFIG_SYS_INTC_0 1 #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS #endif /* timer */ #ifdef XILINX_TIMER_BASEADDR #if (XILINX_TIMER_IRQ != -1) #define CONFIG_SYS_TIMER_0 1 #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) #endif #else #ifdef XILINX_CLOCK_FREQ #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ #else #error BAD CLOCK FREQ #endif #endif /* * memory layout - Example * TEXT_BASE = 0x3600_0000; * CONFIG_SYS_SRAM_BASE = 0x3000_0000; * CONFIG_SYS_SRAM_SIZE = 0x1000_0000; * * CONFIG_SYS_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 * CONFIG_SYS_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 * CONFIG_SYS_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 * * 0x3000_0000 CONFIG_SYS_SDRAM_BASE * FREE * 0x3600_0000 TEXT_BASE * U-BOOT code * 0x3602_0000 * FREE * * STACK * 0x3FF7_F000 CONFIG_SYS_MALLOC_BASE * MALLOC_AREA 256kB Alloc * 0x3FFB_F000 CONFIG_SYS_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x3FFF_F000 CONFIG_SYS_GBL_DATA_OFFSET * GLOBAL_DATA 4kB bd, gd * 0x4000_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE */ /* ddr sdram - main memory */ #define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START #define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) /* global pointer */ #define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* start of global data */ /* monitor code */ #define SIZE 0x40000 #define CONFIG_SYS_MONITOR_LEN SIZE #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MALLOC_LEN SIZE #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) /* stack */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE #define CONFIG_SYS_NO_FLASH 1 #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_IMLS #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #ifndef CONFIG_SYS_ENET #undef CONFIG_CMD_NET #else #define CONFIG_CMD_PING #endif #ifdef XILINX_SYSACE_BASEADDR #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #endif /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "U-Boot-mONStR> " #define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ #define CONFIG_SYS_MAXARGS 15 /* max number of command args */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "xupv2p" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 #define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ #define CONFIG_SYS_HZ 1000 #define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ "base 0;" \ "echo" /* system ace */ #ifdef XILINX_SYSACE_BASEADDR #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION #endif #define CONFIG_CMDLINE_EDITING #endif /* __CONFIG_H */