/* * (C) Copyright 2004-2005 * Wolfgang Denk, DENX Software Engineering, * * (C) Copyright 2004 * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com * * (C) Copyright 2002 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH * Marius Groeger * * Configuation settings for the xaeniax board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_PXA250 1 /* This is an PXA255 CPU */ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ #define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* * select serial console configuration */ #define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP #undef CONFIG_CMD_DTT #define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.68.201 #define CONFIG_SERVERIP 192.168.68.62 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 0x00100000" #define CONFIG_BOOTARGS "console=ttyS1,115200" #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* * Size of malloc() pool; this lives below the uppermost 128 KiB which are * used for the RAM copy of the uboot code */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "u-boot$ " /* Monitor Command Prompt */ #else #define CONFIG_SYS_PROMPT "u-boot=> " /* Monitor Command Prompt */ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ /* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ #define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ #define CONFIG_SYS_DRAM_BASE 0xa0000000 #define CONFIG_SYS_DRAM_SIZE 0x04000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* * FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ /* FIXME */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */ #define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ /* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ #endif /* * SMSC91C111 Network Card */ #define CONFIG_DRIVER_SMC91111 1 #define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */ #define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ #undef CONFIG_SHOW_ACTIVITY #define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ /* * GPIO settings */ /* * GP05 == nUSBReset is 1 * GP10 == CFReset is 1 * GP13 == nCFDataEnable is 1 * GP14 == nCFAddrEnable is 1 * GP15 == nCS1 is 1 * GP21 == ComBrdReset is 1 * GP24 == SFRM is 1 * GP25 == TXD is 1 * GP31 == SYNC is 1 * GP33 == nCS5 is 1 * GP39 == FFTXD is 1 * GP41 == RTS is 1 * GP43 == BTTXD is 1 * GP45 == BTRTS is 1 * GP47 == TXD is 1 * GP48 == nPOE is 1 * GP49 == nPWE is 1 * GP50 == nPIOR is 1 * GP51 == nPIOW is 1 * GP52 == nPCE[1] is 1 * GP53 == nPCE[2] is 1 * GP54 == nPSKTSEL is 1 * GP55 == nPREG is 1 * GP78 == nCS2 is 1 * GP79 == nCS3 is 1 * GP80 == nCS4 is 1 * GP82 == NSSPSFRM is 1 * GP83 == NSSPTXD is 1 */ #define CONFIG_SYS_GPSR0_VAL 0x8320E420 #define CONFIG_SYS_GPSR1_VAL 0x00FFAA82 #define CONFIG_SYS_GPSR2_VAL 0x000DC000 /* * GP03 == LANReset is 0 * GP06 == USBWakeUp is 0 * GP11 == USBControl is 0 * GP12 == Buzzer is 0 * GP16 == PWM0 is 0 * GP17 == PWM1 is 0 * GP23 == SCLK is 0 * GP30 == SDATA_OUT is 0 * GP81 == NSSPCLK is 0 */ #define CONFIG_SYS_GPCR0_VAL 0x40C31848 #define CONFIG_SYS_GPCR1_VAL 0x00000000 #define CONFIG_SYS_GPCR2_VAL 0x00020000 /* * GP00 == CPUWakeUpUSB is input * GP01 == GP reset is input * GP02 == LANInterrupt is input * GP03 == LANReset is output * GP04 == USBInterrupt is input * GP05 == nUSBReset is output * GP06 == USBWakeUp is output * GP07 == CFReady/nBusy is input * GP08 == nCFCardDetect1 is input * GP09 == nCFCardDetect2 is input * GP10 == nCFReset is output * GP11 == USBControl is output * GP12 == Buzzer is output * GP13 == CFDataEnable is output * GP14 == CFAddressEnable is output * GP15 == nCS1 is output * GP16 == PWM0 is output * GP17 == PWM1 is output * GP18 == RDY is input * GP19 == ReaderReady is input * GP20 == ReaderReset is input * GP21 == ComBrdReset is output * GP23 == SCLK is output * GP24 == SFRM is output * GP25 == TXD is output * GP26 == RXD is input * GP27 == EXTCLK is input * GP28 == BITCLK is output * GP29 == SDATA_IN0 is input * GP30 == SDATA_OUT is output * GP31 == SYNC is output * GP32 == SYSSCLK is output * GP33 == nCS5 is output * GP34 == FFRXD is input * GP35 == CTS is input * GP36 == DCD is input * GP37 == DSR is input * GP38 == RI is input * GP39 == FFTXD is output * GP40 == DTR is output * GP41 == RTS is output * GP42 == BTRXD is input * GP43 == BTTXD is output * GP44 == BTCTS is input * GP45 == BTRTS is output * GP46 == RXD is input * GP47 == TXD is output * GP48 == nPOE is output * GP49 == nPWE is output * GP50 == nPIOR is output * GP51 == nPIOW is output * GP52 == nPCE[1] is output * GP53 == nPCE[2] is output * GP54 == nPSKTSEL is output * GP55 == nPREG is output * GP56 == nPWAIT is input * GP57 == nPIOS16 is input * GP58 == LDD[0] is output * GP59 == LDD[1] is output * GP60 == LDD[2] is output * GP61 == LDD[3] is output * GP62 == LDD[4] is output * GP63 == LDD[5] is output * GP64 == LDD[6] is output * GP65 == LDD[7] is output * GP66 == LDD[8] is output * GP67 == LDD[9] is output * GP68 == LDD[10] is output * GP69 == LDD[11] is output * GP70 == LDD[12] is output * GP71 == LDD[13] is output * GP72 == LDD[14] is output * GP73 == LDD[15] is output * GP74 == LCD_FCLK is output * GP75 == LCD_LCLK is output * GP76 == LCD_PCLK is output * GP77 == LCD_ACBIAS is output * GP78 == nCS2 is output * GP79 == nCS3 is output * GP80 == nCS4 is output * GP81 == NSSPCLK is output * GP82 == NSSPSFRM is output * GP83 == NSSPTXD is output * GP84 == NSSPRXD is input */ #define CONFIG_SYS_GPDR0_VAL 0xD3E3FC68 #define CONFIG_SYS_GPDR1_VAL 0xFCFFAB83 #define CONFIG_SYS_GPDR2_VAL 0x000FFFFF /* * GP01 == GP reset is AF01 * GP15 == nCS1 is AF10 * GP16 == PWM0 is AF10 * GP17 == PWM1 is AF10 * GP18 == RDY is AF01 * GP23 == SCLK is AF10 * GP24 == SFRM is AF10 * GP25 == TXD is AF10 * GP26 == RXD is AF01 * GP27 == EXTCLK is AF01 * GP28 == BITCLK is AF01 * GP29 == SDATA_IN0 is AF10 * GP30 == SDATA_OUT is AF01 * GP31 == SYNC is AF01 * GP32 == SYSCLK is AF01 * GP33 == nCS5 is AF10 * GP34 == FFRXD is AF01 * GP35 == CTS is AF01 * GP36 == DCD is AF01 * GP37 == DSR is AF01 * GP38 == RI is AF01 * GP39 == FFTXD is AF10 * GP40 == DTR is AF10 * GP41 == RTS is AF10 * GP42 == BTRXD is AF01 * GP43 == BTTXD is AF10 * GP44 == BTCTS is AF01 * GP45 == BTRTS is AF10 * GP46 == RXD is AF10 * GP47 == TXD is AF01 * GP48 == nPOE is AF10 * GP49 == nPWE is AF10 * GP50 == nPIOR is AF10 * GP51 == nPIOW is AF10 * GP52 == nPCE[1] is AF10 * GP53 == nPCE[2] is AF10 * GP54 == nPSKTSEL is AF10 * GP55 == nPREG is AF10 * GP56 == nPWAIT is AF01 * GP57 == nPIOS16 is AF01 * GP58 == LDD[0] is AF10 * GP59 == LDD[1] is AF10 * GP60 == LDD[2] is AF10 * GP61 == LDD[3] is AF10 * GP62 == LDD[4] is AF10 * GP63 == LDD[5] is AF10 * GP64 == LDD[6] is AF10 * GP65 == LDD[7] is AF10 * GP66 == LDD[8] is AF10 * GP67 == LDD[9] is AF10 * GP68 == LDD[10] is AF10 * GP69 == LDD[11] is AF10 * GP70 == LDD[12] is AF10 * GP71 == LDD[13] is AF10 * GP72 == LDD[14] is AF10 * GP73 == LDD[15] is AF10 * GP74 == LCD_FCLK is AF10 * GP75 == LCD_LCLK is AF10 * GP76 == LCD_PCLK is AF10 * GP77 == LCD_ACBIAS is AF10 * GP78 == nCS2 is AF10 * GP79 == nCS3 is AF10 * GP80 == nCS4 is AF10 * GP81 == NSSPCLK is AF01 * GP82 == NSSPSFRM is AF01 * GP83 == NSSPTXD is AF01 * GP84 == NSSPRXD is AF10 */ #define CONFIG_SYS_GAFR0_L_VAL 0x80000004 #define CONFIG_SYS_GAFR0_U_VAL 0x595A801A #define CONFIG_SYS_GAFR1_L_VAL 0x699A9559 #define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA #define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA #define CONFIG_SYS_GAFR2_U_VAL 0x00000256 /* * clock settings */ /* RDH = 1 * PH = 0 * VFS = 0 * BFS = 0 * SSS = 0 */ #define CONFIG_SYS_PSSR_VAL 0x00000030 #define CONFIG_SYS_CKEN_VAL 0x00000080 /* */ #define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ /* * Memory settings * * This is the configuration for nCS0/1 -> flash banks * configuration for nCS1 : * [31] 0 - * [30:28] 000 - * [27:24] 0000 - * [23:20] 0000 - * [19] 0 - * [18:16] 000 - * configuration for nCS0: * [15] 0 - Slower Device * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?) * [03] 0 - 32 Bit bus width * [02:00] 010 - burst OF 4 ROM or FLASH */ #define CONFIG_SYS_MSC0_VAL 0x000023D2 /* This is the configuration for nCS2/3 -> USB controller, LAN * configuration for nCS3: LAN * [31] 0 - Slower Device * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns * [19] 0 - 32 Bit bus width * [18:16] 100 - variable latency I/O * configuration for nCS2: USB * [15] 1 - Faster Device * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ #define CONFIG_SYS_MSC1_VAL 0x1224A26C /* This is the configuration for nCS4/5 -> LAN * configuration for nCS5: * [31] 0 - * [30:28] 000 - * [27:24] 0000 - * [23:20] 0000 - * [19] 0 - * [18:16] 000 - * configuration for nCS4: LAN * [15] 1 - Faster Device * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns * [03] 0 - 32 Bit bus width * [02:00] 100 - variable latency I/O */ #define CONFIG_SYS_MSC2_VAL 0x00001224 /* MDCNFG: SDRAM Configuration Register * * [31:29] 000 - reserved * [28] 0 - no SA1111 compatiblity mode * [27] 0 - latch return data with return clock * [26] 0 - alternate addressing for pair 2/3 * [25:24] 00 - timings * [23] 0 - internal banks in lower partition 2/3 (not used) * [22:21] 00 - row address bits for partition 2/3 (not used) * [20:19] 00 - column address bits for partition 2/3 (not used) * [18] 0 - SDRAM partition 2/3 width is 32 bit * [17] 0 - SDRAM partition 3 disabled * [16] 0 - SDRAM partition 2 disabled * [15:13] 000 - reserved * [12] 0 - no SA1111 compatiblity mode * [11] 1 - latch return data with return clock * [10] 0 - no alternate addressing for pair 0/1 * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk * [7] 1 - 4 internal banks in lower partition pair * [06:05] 10 - 13 row address bits for partition 0/1 * [04:03] 01 - 9 column address bits for partition 0/1 * [02] 0 - SDRAM partition 0/1 width is 32 bit * [01] 0 - disable SDRAM partition 1 * [00] 1 - enable SDRAM partition 0 */ /* use the configuration above but disable partition 0 */ #define CONFIG_SYS_MDCNFG_VAL 0x00000AC9 /* MDREFR: SDRAM Refresh Control Register * * [32:26] 0 - reserved * [25] 0 - K2FREE: not free running * [24] 0 - K1FREE: not free running * [23] 0 - K0FREE: not free running * [22] 0 - SLFRSH: self refresh disabled * [21] 0 - reserved * [20] 1 - APD: auto power down * [19] 0 - K2DB2: SDCLK2 is MemClk * [18] 0 - K2RUN: disable SDCLK2 * [17] 0 - K1DB2: SDCLK1 is MemClk * [16] 1 - K1RUN: enable SDCLK1 * [15] 1 - E1PIN: SDRAM clock enable * [14] 0 - K0DB2: SDCLK0 is MemClk * [13] 0 - K0RUN: disable SDCLK0 * [12] 0 - E0PIN: disable SDCKE0 * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 */ #define CONFIG_SYS_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */ /* MDMRS: Mode Register Set Configuration Register * * [31] 0 - reserved * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used) * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) * [15] 0 - reserved * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency. * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. */ #define CONFIG_SYS_MDMRS_VAL 0x00320032 /* * PCMCIA and CF Interfaces */ #define CONFIG_SYS_MECR_VAL 0x00000000 #define CONFIG_SYS_MCMEM0_VAL 0x00010504 #define CONFIG_SYS_MCMEM1_VAL 0x00010504 #define CONFIG_SYS_MCATT0_VAL 0x00010504 #define CONFIG_SYS_MCATT1_VAL 0x00010504 #define CONFIG_SYS_MCIO0_VAL 0x00004715 #define CONFIG_SYS_MCIO1_VAL 0x00004715 #endif /* __CONFIG_H */