/* * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on the netspace_v2 code which is * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef _CONFIG_WIRELESS_SPACE_H #define _CONFIG_WIRELESS_SPACE_H /* * Machine number definition */ #define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ #define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE #define CONFIG_IDENT_STRING " Wireless Space" /* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ #define CONFIG_KIRKWOOD /* SoC Family Name */ /* SoC name */ #define CONFIG_KW88F6281 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ #include <config_cmd_default.h> #define CONFIG_CMD_ENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_CMD_NAND #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_USB /* * Core clock definition */ #define CONFIG_SYS_TCLK 166000000 /* 166MHz */ /* * SDRAM configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* * Different SDRAM configuration and size for some of the boards derived * from the Network Space v2 */ /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ #undef CONFIG_RBTREE #undef CONFIG_SYS_IDE_MAXBUS #undef CONFIG_SYS_IDE_MAXDEVICE #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_IDE_MAXDEVICE 1 #undef CONFIG_SYS_PROMPT #define CONFIG_SYS_PROMPT "ws> " /* * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ #define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ #define CONFIG_MII #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN #define CONFIG_NETCONSOLE #define CONFIG_MV88E61XX_SWITCH #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE #define CONFIG_MV88E61XX_CMD #define CONFIG_CMD_TFTPPUT #endif /* CONFIG_CMD_NET */ /* * SATA Driver configuration */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #endif /* CONFIG_MVSATA_IDE */ /* * Enable GPI0 support */ #define CONFIG_KIRKWOOD_GPIO /* * Enable I2C support */ #ifdef CONFIG_CMD_I2C /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ #define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ #endif /* CONFIG_CMD_I2C */ /* * Partition support */ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION /* * File systems support */ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT /* * Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER /* * Console configuration */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* * Enable device tree support */ #define CONFIG_OF_LIBFDT /* * Environment variables configurations */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ /* * Board-specific command to make using buttons etc easier */ #define CONFIG_WIRELESS_SPACE_CMD /* * Default environment variables */ #define CONFIG_PREBOOT #define CONFIG_BOOTARGS "console=ttyS0,115200" #define CONFIG_BOOTCOMMAND \ "if run usbload || run diskload; then bootm; fi" #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ "bootfile=uImage\0" \ "loadaddr=0x800000\0" \ "autoload=no\0" \ "netconsole=" \ "set stdin $stdin,nc; " \ "set stdout $stdout,nc; " \ "set stderr $stderr,nc;\0" \ "diskload=ide reset && " \ "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ "preboot=" \ "dhcp && run netconsole\0" #endif /* _CONFIG_WIRELESS_SPACE_H */