/* * (C) Copyright 2003 * Texas Instruments. * Kshitij Gupta <kshitij@ti.com> * Configuation settings for the TI OMAP Innovator board. * * (C) Copyright 2004 * ARM Ltd. * Philippe Robin, <philippe.robin@arm.com> * Configuration for Versatile PB. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ #define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ #define CONFIG_SYS_TIMER_RATE (1000000 / 256) #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) #define CONFIG_SYS_TIMER_COUNTS_DOWN /* * control registers */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ /* * System controller bit assignment */ #define VERSATILE_REFCLK 0 #define VERSATILE_TIMCLK 1 #define VERSATILE_TIMER1_EnSel 15 #define VERSATILE_TIMER2_EnSel 17 #define VERSATILE_TIMER3_EnSel 19 #define VERSATILE_TIMER4_EnSel 21 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_MISC_INIT_R 1 /* * Size of malloc() pool */ #define CONFIG_ENV_SIZE 8192 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* * Hardware drivers */ #define CONFIG_SMC91111 #define CONFIG_SMC_USE_32_BIT #define CONFIG_SMC91111_BASE 0x10010000 #undef CONFIG_SMC91111_EXT_PHY /* * NS16550 Configuration */ #define CONFIG_PL011_SERIAL #define CONFIG_PL011_CLOCK 24000000 #define CONFIG_PL01x_PORTS \ {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1 } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 #define CONFIG_SYS_SERIAL0 0x101F1000 #define CONFIG_SYS_SERIAL1 0x101F2000 /* * Command line configuration. */ #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV /* * BOOTP options */ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\ "netdev=25,0,0xf1010000,0xf1010010,eth0 "\ "console=ttyAMA0,38400n1" /* * Static configuration when assigning fixed address */ #define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Monitor Command Prompt */ #ifdef CONFIG_ARCH_VERSATILE_AB # define CONFIG_SYS_PROMPT "VersatileAB # " #else # define CONFIG_SYS_PROMPT "VersatilePB # " #endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x00800000 #define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) #define CONFIG_BOARD_EARLY_INIT_F /*----------------------------------------------------------------------- * FLASH and environment organization */ #ifdef CONFIG_ARCH_VERSATILE_QEMU #define CONFIG_SYS_TEXT_BASE 0x10000 #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_MONITOR_LEN 0x80000 #else #define CONFIG_SYS_TEXT_BASE 0x01000000 /* * Use the CFI flash driver for ease of use */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_ENV_IS_IN_FLASH 1 /* * System control register */ #define VERSATILE_SYS_BASE 0x10000000 #define VERSATILE_SYS_FLASH_OFFSET 0x4C #define VERSATILE_FLASHCTRL \ (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) /* Enable writing to flash */ #define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ /* * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block * i.e. * the bottom "sector" (bottom boot), or top "sector" * (top boot), is a seperate erase region divided into * 4 (equal) smaller sectors. This, notionally, allows * quicker erase/rewrire of the most frequently changed * area...... * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4 */ #ifdef CONFIG_ARCH_VERSATILE_AB #define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */ #define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE) #define CONFIG_SYS_MAX_FLASH_SECT (520) #endif #ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ #define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ #define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE #define CONFIG_SYS_MAX_FLASH_SECT (260) #endif #define CONFIG_SYS_FLASH_BASE 0x34000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE) /* The ARM Boot Monitor is shipped in the lowest sector of flash */ #define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE) #define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ #endif #endif /* __CONFIG_H */