/* * Copyright (C) 2006 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> * * Copyright (C) 2007 Logic Product Development, Inc. * Peter Barada <peterb@logicpd.com> * * Copyright (C) 2007 MontaVista Software, Inc. * Anton Vorontsov <avorontsov@ru.mvista.com> * * (C) Copyright 2010 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options */ /* This needs to be set prior to including km/km83xx-common.h */ #define CONFIG_SYS_TEXT_BASE 0xF0000000 #if defined(CONFIG_SUVD3) /* SUVD3 board specific */ #define CONFIG_HOSTNAME suvd3 #define CONFIG_KM_BOARD_NAME "suvd3" /* include common defines/options for all 8321 Keymile boards */ #include "km/km8321-common.h" #elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ #define CONFIG_HOSTNAME kmvect1 #define CONFIG_KM_BOARD_NAME "kmvect1" /* include common defines/options for all 8309 Keymile boards */ #include "km/km8309-common.h" #else #error Supported boards are: SUVD3, KMVECT1 #endif #define CONFIG_SYS_APP1_BASE 0xA0000000 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * Init Local Bus Memory Controller: * * Bank Bus Machine PortSz Size Device * ---- --- ------- ------ ----- ------ * 2 Local UPMA 16 bit 256MB APP1 * 3 Local GPCM 16 bit 256MB APP2 * */ /* * APP1 on the local bus CS2 */ #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE #define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ BR_PS_16 | \ BR_MS_UPMA | \ BR_V) #define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ BR_PS_16 | \ BR_V) #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ OR_GPCM_CSNT | \ OR_GPCM_ACS_DIV4 | \ OR_GPCM_SCY_3 | \ OR_GPCM_TRLX_SET) #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) /* * MMU Setup */ /* APP1: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U /* * QE UEC ethernet configuration */ #if defined(CONFIG_KMVECT1) #define CONFIG_MV88E6352_SWITCH #define CONFIG_KM_MVEXTSW_ADDR 0x10 /* ethernet port connected to simple switch 88e6122 (UEC0) */ #define CONFIG_UEC_ETH1 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 #define CONFIG_FIXED_PHY 0xFFFFFFFF #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ #define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ {devnum, speed, duplex} #define CONFIG_SYS_FIXED_PHY_PORTS \ CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 #define CONFIG_UEC_ETH2 #define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 0 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 #endif /* CONFIG_KMVECT1 */ #endif /* __CONFIG_H */