/* * (C) Copyright 2004 * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_MPC8220 1 #define CONFIG_SORCERY 1 /* Sorcery board */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* * Serial console configuration */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* PCI */ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_MEM_BUS 0x80000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS #define CONFIG_PCI_MEM_SIZE 0x10000000 #define CONFIG_PCI_IO_BUS 0x71000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_PCI_CFG_BUS 0x70000000 #define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS #define CONFIG_PCI_CFG_SIZE 0x01000000 /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP /* * Default Environment */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_HOSTNAME sorcery #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs $bootargs " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ ":$hostname:$netdev:off panic=1\0" \ "flash_nfs=run nfsargs addip;" \ "bootm $kernel_addr\0" \ "flash_self=run ramargs addip;" \ "bootm $kernel_addr $ramdisk_addr\0" \ "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_82xx\0" \ "bootfile=/tftpboot/sorcery/uImage\0" \ "kernel_addr=FFE00000\0" \ "ramdisk_addr=FFB00000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_NET_MULTI #define CONFIG_EEPRO100 /* * I2C configuration */ #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_MODULE 1 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F /* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif /* * Flexbus Chipselect configuration * Beware: Some CS# seem to be mandatory (if these CS# are not set, * board can hang-up in unpredictable place). * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# */ /* Flash */ #define CONFIG_SYS_CS0_BASE 0xf800 #define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ #define CONFIG_SYS_CS0_CTRL 0x001019c0 /* NVM */ #define CONFIG_SYS_CS1_BASE 0xf7e8 #define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ #define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ /* Atlas2 + Gemini */ #define CONFIG_SYS_CS2_BASE 0xf7e7 #define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ #define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ /* CAN Controller */ #define CONFIG_SYS_CS3_BASE 0xf7e6 #define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ #define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ /* Foreign interface */ #define CONFIG_SYS_CS4_BASE 0xf7e5 #define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ #define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ /* CPLD */ #define CONFIG_SYS_CS5_BASE 0xf7e4 #define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ #define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ #define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) #define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ /* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) #define CONFIG_ENV_SIZE 0x4000 /* 16K */ #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_ENV_OVERWRITE 1 #if defined CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_EEPROM #elif defined CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_IN_EEPROM #elif defined CONFIG_ENV_IS_IN_EEPROM #undef CONFIG_ENV_IS_IN_NVRAM #undef CONFIG_ENV_IS_IN_FLASH #endif /* * Memory map */ #define CONFIG_SYS_MBAR 0xF0000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_SRAM_SIZE 0x8000 /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) # define CONFIG_SYS_RAMBOOT 1 #endif #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* SDRAM configuration (for SPD) */ #define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 #define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ #define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 #define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ /* SDRAM drive strength register (for SSTL_2 class II)*/ #define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) /* * Ethernet configuration */ #define CONFIG_MPC8220_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ #define CONFIG_PHY_ADDR 0x1F #define CONFIG_MII 1 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Various low-level settings */ #define CONFIG_SYS_HID0_INIT 0 #define CONFIG_SYS_HID0_FINAL 0 /* #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE */ #endif /* __CONFIG_H */